Strategic positioning of Taiwan in the outsourcing market: Evidence from information technology services and electronic manufacturing outsourcing to China

In outsourcing relationships with China, the Electronic Manufacturing (EM) and Information Technology Services (ITS) industry in Taiwan may possess such advantages as the continuing growth of its production value, complete manufacturing supply chain, low production cost and a large-scale Chinese market, and language and culture similarity compared to outsourcing to other countries. Nevertheless, the Council for Economic Planning and Development of Executive Yuan (CEPD) found that Taiwan's IT services outsourcing to China is subject to certain constraints and might not be as successful as the EM outsourcing (Aggarwal, 2003; CEPD, 2004a; CIER, 2003; Einhorn and Kriplani, 2003; Kumar and Zhu, 2006; Li and Gao, 2003; MIC, 2006). Some studies examined this issue, but failed to (1) provide statistical evidence about lower prevalence rates of IT services outsourcing, and (2) clearly explain the lower prevalence rates of IT services outsourcing by identifying similarities and differences between both types of outsourcing contexts. This research seeks to fill that gap and possibly provide potential strategic guidelines to ITS firms in Taiwan. This study adopts Transaction Cost Economics (TCE) as the theoretical basis. The basic premise is that different types of outsourcing activities may incur differing transaction costs and realize varying degrees of outsourcing success due to differential attributes of the transactions in the outsourcing process. Using primary data gathered from questionnaire surveys of ninety two firms, the results from exploratory analysis and binary logistic regression indicated that (1) when outsourcing to China, Taiwanese firms' ITS outsourcing tends to have higher level of asset specificity, uncertainty and technical skills relative to EM outsourcing, and these features indirectly reduce firms' outsourcing prevalence rates via their direct positive impacts on transaction costs; (2) Taiwanese firms' ITS outsourcing tends to have lower level of transaction structurability relative to EM outsourcing, and this feature indirectly increases firms' outsourcing prevalence rates via its direct negative impacts on transaction costs; (3) frequency does influence firms' transaction costs in ITS outsourcing positively, but does not bring impacts into their outsourcing prevalence rates, (4) relatedness does influence firms' transaction costs positively and prevalence rates negatively in ITS outsourcing, but its impacts on the prevalence rates are not caused by the mediation effects of transaction costs, and (5) firm size of outsourcing provider does not affect firms' transaction costs, but does affect their outsourcing prevalence rates in ITS outsourcing directly and positively. Using primary data gathered from face-to-face interviews of executives from seven firms, the results from inductive analysis indicated that (1) IT services outsourcing has lower prevalence rates than EM outsourcing, and (2) this result is mainly attributed to Taiwan's core competence in manufacturing and management and higher overall transaction costs of IT services outsourcing. Specifically, there is not much difference between both types of outsourcing context in the transaction characteristics of reputation and most aspects of overall comparison. Although there are some differences in the feature of firm size of the outsourcing provider, the difference doesn't cause apparent impacts on firms' overall transaction costs. The medium or above medium difference in the transaction characteristics of asset specificity, uncertainty, frequency, technical skills, transaction structurability, and relatedness has caused higher overall transaction costs for IT services outsourcing. This higher cost might cause lower prevalence rates for ITS outsourcing relative to EM outsourcing. Overall, the interview results are consistent with the statistical analyses and provide support to my expectation that in outsourcing to China, Taiwan's electronic manufacturing firms do have lower prevalence rates of IT services outsourcing relative to EM outsourcing due to higher transaction costs caused by certain attributes. To solve this problem, firms' management should aim at identifying alternative strategies and strive to reduce their overall transaction costs of IT services outsourcing by initiating appropriate strategies which fit their environment and needs.

The discrimination and association of float glass and the quantitative analysis of liquids from aerosols and microdrops using laser induced breakdown spectroscopy

Glass is a common form of trace evidence found at many scenes of crimes in the form of small fragments. These glass fragments can transfer to surrounding objects and/or persons and may provide forensic investigators valuable information to link a suspect to the scene of a crime. Since the elemental composition of different glass sources can be very similar, a highly discriminating technique is required to distinguish between fragments that have originated from different sources. ^ The research presented here demonstrates that Laser Induced Breakdown Spectroscopy (LIBS) is a viable analytical technique for the association and discrimination of glass fragments. The first part of this research describes the optimization of the LIBS experiments including the use of different laser wavelengths to investigate laser-material interaction. The use of a 266 nm excitation laser provided the best analytical figures of merit with minimal damage to the sample. The resulting analytical figures of merit are presented. The second part of this research evaluated the sensitivity of LIBS to associate or discriminate float glass samples originating from the same manufacturing plants and produced at approximately the same time period. Two different sample sets were analyzed ranging in manufacturing dates from days to years apart. Eighteen (18) atomic emission lines corresponding to the elements Sr, K, Fe, Ca, Al, Ba, Na, Mg and Ti, were chosen because of their detection above the method detection limits and for presenting differences between the samples. Ten elemental ratios producing the most discrimination were selected for each set. When all the ratios are combined in a comparison, 99% of the possible pairs were discriminated using the optimized LIBS method generating typical analytical precisions of ∼5% RSD. ^ The final study consisted of the development of a new approach for the use of LIBS as a quantitative analysis of ultra-low volume solution analysis using aerosols and microdrops. Laser induced breakdown spectroscopy demonstrated to be an effective technique for the analysis of as low as 90 pL for microdrop LIBS with 1 pg absolute LOD and 20 µL for aerosol LIBS with an absolute LOD of ∼100 fg.^

Evaluation of the evidential value of the elemental composition of glass, ink and paper by laser-based microspectrochemical methods

Elemental analysis can become an important piece of evidence to assist the solution of a case. The work presented in this dissertation aims to evaluate the evidential value of the elemental composition of three particular matrices: ink, paper and glass. In the first part of this study, the analytical performance of LIBS and LA-ICP-MS methods was evaluated for paper, writing inks and printing inks. A total of 350 ink specimens were examined including black and blue gel inks, ballpoint inks, inkjets and toners originating from several manufacturing sources and/or batches. The paper collection set consisted of over 200 paper specimens originating from 20 different paper sources produced by 10 different plants. Micro-homogeneity studies show smaller variation of elemental compositions within a single source (i.e., sheet, pen or cartridge) than the observed variation between different sources (i.e., brands, types, batches). Significant and detectable differences in the elemental profile of the inks and paper were observed between samples originating from different sources (discrimination of 87–100% of samples, depending on the sample set under investigation and the method applied). These results support the use of elemental analysis, using LA-ICP-MS and LIBS, for the examination of documents and provide additional discrimination to the currently used techniques in document examination. In the second part of this study, a direct comparison between four analytical methods (µ-XRF, solution-ICP-MS, LA-ICP-MS and LIBS) was conducted for glass analyses using interlaboratory studies. The data provided by 21 participants were used to assess the performance of the analytical methods in associating glass samples from the same source and differentiating different sources, as well as the use of different match criteria (confidence interval (±6s, ±5s, ±4s, ±3s, ±2s), modified confidence interval, t-test (sequential univariate, p=0.05 and p=0.01), t-test with Bonferroni correction (for multivariate comparisons), range overlap, and Hotelling's T2 tests. Error rates (Type 1 and Type 2) are reported for the use of each of these match criteria and depend on the heterogeneity of the glass sources, the repeatability between analytical measurements, and the number of elements that were measured. The study provided recommendations for analytical performance-based parameters for µ-XRF and LA-ICP-MS as well as the best performing match criteria for both analytical techniques, which can be applied now by forensic glass examiners.

Participative Budgeting and Participant Motivation: A Review of the Literature

In their discussion - Participative Budgeting and Participant Motivation: A Review of the Literature - by Frederick J. Demicco, Assistant Professor, School of Hotel, Restaurant and Institutional Management, The Pennsylvania State University and Steven J. Dempsey, Fulton F. Galer, Martin Baker, Graduate Assistants, College of Business at Virginia Polytechnic Institute and State University, the authors initially observe: “In recent years behavioral literature has stressed the importance of participation In goal-setting by those most directly affected by those goals. The common postulate is that greater participation by employees in the various management functions, especially the planning function, will lead to improved motivation, performance, coordination, and functional behavior. The authors analyze this postulate as it relates to the budgeting process and discuss whether or not participative budgeting has a significant positive impact on the motivations of budget participants.” In defining the concept of budgeting, the authors offer: “Budgeting is usually viewed as encompassing the preparation and adoption of a detailed financial operating plan…” In furthering that statement they also furnish that budgeting’s focus is to influence, in a positive way, how managers plan and coordinate the activities of a property in a way that will enhance their own performance. In essence, framing an organization within its described boundaries, and realizing its established goals. The authors will have you know, to control budget is to control operations. What kind of parallels can be drawn between the technical methods and procedures of budgeting, and managerial behavior? “In an effort to answer this question, Ronen and Livingstone have suggested that a fourth objective of budgeting exists, that of motivation,” say the authors with attribution. “The managerial function of motivation is manipulative in nature.” Demicco, Dempsey, Galer, and Baker attempt to quantify motivation as a psychological premise using the expectancy theory, which encompasses empirical support, intuitive appeal, and ease of application to the budgetary process. They also present you with House's Path-Goal model; essentially a mathematics type formula designed to gauge motivation. You really need to see this. The views of Argyris are also explored in particular detail. Although, the Argyris study was primarily aimed at manufacturing firms, and the effects on line-supervisors of the manufacturing budgets which were used to control and evaluate their performance, its application is relevant to the hospitality industry. As the title suggests, other notables in the field of behavioral motivation theory, and participation are also referenced. “Behavioral theory has been moving away from models of purported general applicability toward contingency models that are suited for particular situations,” say the authors in closing. “It is conceivable that some time in the future, contingency models will make possible the tailoring of budget strategies to individual budget holder personalities.”

Evaluation of the Evidential Value of the Elemental Composition of Glass, Ink and Paper by Laser-Based Micro-Spectrochemical Methods

Elemental analysis can become an important piece of evidence to assist the solution of a case. The work presented in this dissertation aims to evaluate the evidential value of the elemental composition of three particular matrices: ink, paper and glass. In the first part of this study, the analytical performance of LIBS and LA-ICP-MS methods was evaluated for paper, writing inks and printing inks. A total of 350 ink specimens were examined including black and blue gel inks, ballpoint inks, inkjets and toners originating from several manufacturing sources and/or batches. The paper collection set consisted of over 200 paper specimens originating from 20 different paper sources produced by 10 different plants. Micro-homogeneity studies show smaller variation of elemental compositions within a single source (i.e., sheet, pen or cartridge) than the observed variation between different sources (i.e., brands, types, batches). Significant and detectable differences in the elemental profile of the inks and paper were observed between samples originating from different sources (discrimination of 87 – 100% of samples, depending on the sample set under investigation and the method applied). These results support the use of elemental analysis, using LA-ICP-MS and LIBS, for the examination of documents and provide additional discrimination to the currently used techniques in document examination. In the second part of this study, a direct comparison between four analytical methods (µ-XRF, solution-ICP-MS, LA-ICP-MS and LIBS) was conducted for glass analyses using interlaboratory studies. The data provided by 21 participants were used to assess the performance of the analytical methods in associating glass samples from the same source and differentiating different sources, as well as the use of different match criteria (confidence interval (±6s, ±5s, ±4s, ±3s, ±2s), modified confidence interval, t-test (sequential univariate, p=0.05 and p=0.01), t-test with Bonferroni correction (for multivariate comparisons), range overlap, and Hotelling’s T2 tests. Error rates (Type 1 and Type 2) are reported for the use of each of these match criteria and depend on the heterogeneity of the glass sources, the repeatability between analytical measurements, and the number of elements that were measured. The study provided recommendations for analytical performance-based parameters for µ-XRF and LA-ICP-MS as well as the best performing match criteria for both analytical techniques, which can be applied now by forensic glass examiners.