Characterizations of the Major Coral Diseases of the Philippines: Ulcerative White Spot Disease and Novel Growth Anomalies of Porites

Coral reefs are in decline worldwide and coral disease is a significant contributing factor. However, etiologies of coral diseases are still not well understood. In contrast with the Caribbean, extremely little is known about coral diseases in the Philippines. In 2005, off Southeast Negros Island, Philippines, I investigated relationships between environmental parameters and prevalence of the two most common coral diseases, ulcerative white spot (UWS) and massive Porites growth anomalies (MPGAs). Samples were collected along a disease prevalence gradient 40.5 km long. Principal component analyses showed prevalence of MPGAs was positively correlated with water column nitrogen, organic carbon of surface sediments, and colony density. UWS was positively correlated with water column phosphorus. This is the first quantitative evidence linking anthropogenically-impacted water and sediment to a higher prevalence of these diseases. Histological and cytological alterations were investigated by comparing tissues from two distinct types of MPGA lesions (types 1 and 2) and healthy coral using light and electron microscopy. Skeletal abnormalities and sloughing, swelling, thinning, and loss of tissues in MPGAs resembled tissues exposed to bacterial or fungal toxins. Both lesion types had decreases in symbiotic zooxanthellae, which supply nutrients to corals. Notable alterations included migrations of chromophore cells (amoebocytes) (1) nocturnally to outer epithelia to perform wound-healing, including plugging gaps and secreting melanin in degraded tissues, and (2) diurnally to the interior of the tissue possibly to prevent shading zooxanthellae in order to maximize photosynthate production. Depletion of melanin (active in wound healing) in type 2 lesions suggested type 2 tissues were overtaxed and less stable. MPGAs contained an abundance of endolithic fungi and virus-like particles, which may result from higher nutrient levels and play roles in disease development. Swollen cells and mucus frequently blocked gastrovascular canals (GVCs) in MPGAs. Type 1 lesions appeared to compensate for impeded flow of wastes and nutrients through these canals with proliferation of new GVCs, which were responsible for the observed thickened tissues. In contrast, type 2 tissues were thin and more degraded. Dysplasia and putative neoplasia were also observed in MPGAs which may result from the tissue regeneration capacity being overwhelmed.

The Construction and Optimization on an Ion Mobility Spectrometer for the Analysis of Explosives and Drugs

Today, over 15,000 Ion Mobility Spectrometry (IMS) analyzers are employed at worldwide security checkpoints to detect explosives and illicit drugs. Current portal IMS instruments and other electronic nose technologies detect explosives and drugs by analyzing samples containing the headspace air and loose particles residing on a surface. Canines can outperform these systems at sampling and detecting the low vapor pressure explosives and drugs, such as RDX, PETN, cocaine, and MDMA, because these biological detectors target the volatile signature compounds available in the headspace rather than the non-volatile parent compounds of explosives and drugs. In this dissertation research volatile signature compounds available in the headspace over explosive and drug samples were detected using SPME as a headspace sampling tool coupled to an IMS analyzer. A Genetic Algorithm (GA) technique was developed to optimize the operating conditions of a commercial IMS (GE Itemizer 2), leading to the successful detection of plastic explosives (Detasheet, Semtex H, and C-4) and illicit drugs (cocaine, MDMA, and marijuana). Short sampling times (between 10 sec to 5 min) were adequate to extract and preconcentrate sufficient analytes (> 20 ng) representing the volatile signatures in the headspace of a 15 mL glass vial or a quart-sized can containing ≤ 1 g of the bulk explosive or drug. Furthermore, a research grade IMS with flexibility for changing operating conditions and physical configurations was designed and fabricated to accommodate future research into different analytes or physical configurations. The design and construction of the FIU-IMS were facilitated by computer modeling and simulation of ion’s behavior within an IMS. The simulation method developed uses SIMION/SDS and was evaluated with experimental data collected using a commercial IMS (PCP Phemto Chem 110). The FIU-IMS instrument has comparable performance to the GE Itemizer 2 (average resolving power of 14, resolution of 3 between two drugs and two explosives, and LODs range from 0.7 to 9 ng). The results from this dissertation further advance the concept of targeting volatile components to presumptively detect the presence of concealed bulk explosives and drugs by SPME-IMS, and the new FIU-IMS provides a flexible platform for future IMS research projects.

Branch and Price Solution Approach for Order Acceptance and Capacity Planning in Make-to-Order Operations

The increasing emphasis on mass customization, shortened product lifecycles, synchronized supply chains, when coupled with advances in information system, is driving most firms towards make-to-order (MTO) operations. Increasing global competition, lower profit margins, and higher customer expectations force the MTO firms to plan its capacity by managing the effective demand. The goal of this research was to maximize the operational profits of a make-to-order operation by selectively accepting incoming customer orders and simultaneously allocating capacity for them at the sales stage. For integrating the two decisions, a Mixed-Integer Linear Program (MILP) was formulated which can aid an operations manager in an MTO environment to select a set of potential customer orders such that all the selected orders are fulfilled by their deadline. The proposed model combines order acceptance/rejection decision with detailed scheduling. Experiments with the formulation indicate that for larger problem sizes, the computational time required to determine an optimal solution is prohibitive. This formulation inherits a block diagonal structure, and can be decomposed into one or more sub-problems (i.e. one sub-problem for each customer order) and a master problem by applying Dantzig-Wolfe’s decomposition principles. To efficiently solve the original MILP, an exact Branch-and-Price algorithm was successfully developed. Various approximation algorithms were developed to further improve the runtime. Experiments conducted unequivocally show the efficiency of these algorithms compared to a commercial optimization solver. The existing literature addresses the static order acceptance problem for a single machine environment having regular capacity with an objective to maximize profits and a penalty for tardiness. This dissertation has solved the order acceptance and capacity planning problem for a job shop environment with multiple resources. Both regular and overtime resources is considered. The Branch-and-Price algorithms developed in this dissertation are faster and can be incorporated in a decision support system which can be used on a daily basis to help make intelligent decisions in a MTO operation.

Turkey and Neo-Ottomanism: Domestic Sources, Dynamics and Foreign Policy

This study examined the relationship between the Turkish Islamic movements and the present government of the Justice and Development Party (Adalet ve Kalkinma Partisi, AK Party). Since the AK Party came to power in 2002 it implemented unparalleled political reforms and pursued to improve Turkey’s relations with the EU. Opponents argued that because of the dominance of the secular military in Turkish politics, the AK Party is forced to secretly advance its Islamic agenda using the language and symbolism of democracy and human rights. This study argued that the ideas of the AK Party show similarities with the “Ottomanist” thought of the late Ottoman era. With special reference to the preservation of the Ottoman State, Ottomanism in an eclectic way was able to incorporate Islamic principles like freedom, justice and consultation into the political arena which was increasingly dominated by the secular European concepts. Literature on Islam and politics in Turkey, however, disregards the Ottoman roots of freedom and pluralism and tends to reduce the relationship between religion and state into exclusively confrontational struggles. This conceptualization of the political process relies on particular non-Turkish Muslim experiences which do not necessarily represent Islam’s venture in Turkey. Contrary to the prevailing scholarship, Islamic movements in Turkey, namely, Naqshbandi, National View and Nur, which are discussed in detail in this study, are not monolithic. They all uphold the same creedal tenets of Islam but they have sharp differences in terms of how they conceptualize the role of religious agency in politics. I argue that this diversity is a result of three distinct methodologies of Islamic religious life which are the Tariqah (Tarikat), Shariah (Şeriat), and Haqiqah (Hakikat). The differences between these three approaches represent a typological hierarchy in the formation of the Muslim/believer as an agent of Islamic identity. Through these different if not conflicting modes, the AK Party reconnected itself with Turkey’s Ottoman heritage in a post-Ottoman, secular setting and was able to develop an eclectic political identity of Neo-Ottomanism that is evident in the flexibility if not inconsistency of its domestic and foreign policy preferences.

Development of distributed generation infrastructure for microgrid connectivity to operational power systems

Distributed Generation (DG) from alternate sources and smart grid technologies represent good solutions for the increase in energy demands. Employment of these DG assets requires solutions for the new technical challenges that are accompanied by the integration and interconnection into operational power systems. A DG infrastructure comprised of alternate energy sources in addition to conventional sources, is developed as a test bed. The test bed is operated by synchronizing, wind, photovoltaic, fuel cell, micro generator and energy storage assets, in addition to standard AC generators. Connectivity of these DG assets is tested for viability and for their operational characteristics. The control and communication layers for dynamic operations are developed to improve the connectivity of alternates to the power system. A real time application for the operation of alternate sources in microgrids is developed. Multi agent approach is utilized to improve stability and sequences of actions for black start are implemented. Experiments for control and stability issues related to dynamic operation under load conditions have been conducted and verified.

Physical dynamic simulation of shipboard power system components in a distributed computational environment

Shipboard power systems have different characteristics than the utility power systems. In the Shipboard power system it is crucial that the systems and equipment work at their peak performance levels. One of the most demanding aspects for simulations of the Shipboard Power Systems is to connect the device under test to a real-time simulated dynamic equivalent and in an environment with actual hardware in the Loop (HIL). The real time simulations can be achieved by using multi-distributed modeling concept, in which the global system model is distributed over several processors through a communication link. The advantage of this approach is that it permits the gradual change from pure simulation to actual application. In order to perform system studies in such an environment physical phase variable models of different components of the shipboard power system were developed using operational parameters obtained from finite element (FE) analysis. These models were developed for two types of studies low and high frequency studies. Low frequency studies are used to examine the shipboard power systems behavior under load switching, and faults. High-frequency studies were used to predict abnormal conditions due to overvoltage, and components harmonic behavior. Different experiments were conducted to validate the developed models. The Simulation and experiment results show excellent agreement. The shipboard power systems components behavior under internal faults was investigated using FE analysis. This developed technique is very curial in the Shipboard power systems faults detection due to the lack of comprehensive fault test databases. A wavelet based methodology for feature extraction of the shipboard power systems current signals was developed for harmonic and fault diagnosis studies. This modeling methodology can be utilized to evaluate and predicate the NPS components future behavior in the design stage which will reduce the development cycles, cut overall cost, prevent failures, and test each subsystem exhaustively before integrating it into the system.

An examination of the possible consolidation of African American political power through selective migration

This study examined whether African Americans could consolidate political power through a migration into a specific state or set of states in sufficient numbers to establish a voting majority within that state. In order to examine the feasibility and efficacy of this strategy, a variety of factors were reviewed, including the historical context leading to the current situation; the political benefits to be derived from the control of a state; and the population and migration patterns of African Americans. The results indicated that this strategy could succeed in providing significant substantive and symbolic political benefits to the African American community, but could also have some negative repercussions.

Design and analysis of micro-channel heat-exchanger embedded in Low Temperature Co-fire Ceramic (LTCC)

Increased device density, switching speeds of integrated circuits and decrease in package size is placing new demands for high power thermal-management. The convectional method of forced air cooling with passive heat sink can handle heat fluxes up-to 3-5W/cm2; however current microprocessors are operating at levels of 100W/cm2, This demands the usage of novel thermal-management systems. In this work, water-cooling systems with active heat sink are embedded in the substrate. The research involved fabricating LTCC substrates of various configurations - an open-duct substrate, the second with thermal vias and the third with thermal vias and free-standing metal columns and metal foil. Thermal testing was performed experimentally and these results are compared with CFD results. An overall thermal resistance for the base substrate is demonstrated to be 3.4oC/W-cm2. Addition of thermal vias reduces the effective resistance of the system by 7times and further addition of free standing columns reduced it by 20times.

Effect of child care subsidies on price and quality of care for low -income families

This dissertation examines the effect of regulations, resource and referral agencies, and subsidies on price and quality of care in child care centers. This research is based on a carefully developed conceptual framework that incorporates the factors affecting the demand and supply of child care. The first step in developing this framework is sketching out the structural equations. The structural equations help us understand the underlying behavior of individuals and firms making a decision. The exogenous variables are vector of attributes relating to family characteristics, child characteristics, regulations, subsidy, community characteristics and prices of inputs. Based on the structural equations, reduced form equations are estimated to find the effect of each of the exogenous variables on each of the endogenous variables. Reduced form equations help us answer public policy questions. The sample for this study is from the 1990 Profile of Child Care Settings (PCCS) data in which 2,089 center based programs were interviewed. Child/Staff Ratio (Group Level): Results indicate that among subsidies, only the state subsidy per child in poverty has a significant effect on the child/staff ratio at the group level. Presence of resource and referral agencies also increase the child/staff ratio at the group level. Also when the maximum center group size regulation for 25-36 months becomes more stringent, the child/staff ratio at the group level decreases. Child/Staff Ratio (Center Level): When the regulations for the maximum child/staff ratio for age groups 13-24 months and 37-60 months become lax, the child/staff ratio for the center increases. As the regulation for maximum group size for infants becomes stringent, the child/staff ratio decreases. An interesting finding is that as the regulations for maximum group size for age groups 13-24 months and 25-36 months become stringent, the child/staff ratio for the center increases. Another significant finding is that when a center is located in a rural area the child/staff ratio is significantly lower. Center Weighted Average Hourly Fees: Maximum group size regulations for age groups 25-36 months and 37-60 months have a negative effect on center hourly fee. Maximum child staff regulations for age groups 13-24 months and 37-60 months have a negative effect on center hourly fee. Maximum child staff regulations for age groups 0-12 months and 25-36 months have a positive effect on center hourly fee. Findings also indicate that the center average hourly price is lower when there is a resource and referral agency present. Cost adjusted prekindergarten funds and JOBS child care subsidies have a negative effect on average hourly fee. Cost adjusted social services block grant and state subsidy per child in poverty have a positive effect on the average hourly price. A major finding of this dissertation is the interaction of subsidy and regulatory variables. Another major finding is that child/staff ratio at the group level is lower when there is an interaction between geographic location and nature of center sponsorship.

Inflation, currency substitution, and dollarization : the case of Argentina

This dissertation discusses the relationship between inflation, currency substitution and dollarization that has taken place in Argentina for the past several decades. First, it is shown that when consumers are able to hold only domestic monetary balances (without capital mobility) an increase in the rate of inflation will produce a balance of payments deficit. We then look at the same issue but with heterogeneous consumers, this heterogeneity being generated by non-proportional lump-sum transfers. Second, we discussed some necessary assumptions related to currency substitution models and concluded that there was no a-priori conclusion on whether currencies should be assumed to be "cooperant" or "non-cooperant" in utility. That is to say, whether individuals held different currencies together or one instead of the other. Third, we went into discussing the issue of currency substitution as being a constraint on governments inflationary objectives rather than a choice of those governments to avoid hyperinflations. We showed that imperfect substitutability between currencies does not "reduce the scope for rational (hyper)inflationary processes" as it had been previously argued. It will ultimately depend on the parametrization used and not on the intrinsic characteristics of imperfect substitutability between currencies. We further showed that in Argentina, individuals have been able to endogenize the money supply by holding foreign monetary balances. We argued that the decision to hold foreign monetary balances by individuals is always a second best due to the trade-off between holding foreign monetary balances and consumption. For some levels of income, consumption, and foreign inflation, individuals would prefer to hold domestic monetary balances rather than foreign ones. We then modeled the distinction between dollarization and currency substitution. We concluded that although dollarization is necessary for currency substitution to take place, the decision to use foreign monetary balances for transactions purposes is largely independent from the dollarization process. Finally, we concluded that Argentina should not fully dollarize its economy because dollarization is always a second best to using a domestic currency. Further, we argued that a fixed exchange system would be better than a flexible exchange rate or a "crawling-peg" system because of the characteristics of the political system and the possibilities of "mass praetorianism" to develop, which is intricately linked to "populist" solutions.

Docking and simulation study of the enantiospecificity of chiral epoxidation reactions catalyzed by chloroperoxidase

Chloroperoxidase (CPO), a 298-residue glycosylated protein from the fungus Caldariomyces fumago, is probably the most versatile heme enzyme yet discovered. Interest in CPO as a catalyst is based on its power to produce enantiomerically enriched products. Recent research has focused its attention on the ability of CPO to epoxidize alkenes in high regioselectivity and enantioselectivity as an efficient and environmentally benign alternative to traditional synthetic routes. There has been little work on the nature of ligand binding, which probably controls the regio- and enantiospecifity of CPO. Consequently it is here that we focus our work. We report docking calculations and computer simulations aimed at predicting the enantiospecificity of CPO-catalyzed epoxidation of three model substrates. On the basis of this work candidate mutations to improve the efficiency of CPO are predicted. In order to accomplish these aims, a simulated annealing and molecular dynamics protocol is developed to sample potentially reactive substrate/CPO complexes.

Process inventory and pollution prevention overview for the citrus industry

Florida citrus represents approximately 70 percent of the industry production in the United States; therefore, any associated agricultural and industrial contamination is of concern and a focus of attention. The use of synthetic organic chemicals has become a farmer's necessity in order to supply consumers with high quality products, free of pest damage. However, industrial citrus wastes and chemical residual levels worry not only government agencies but also consumers since they indicate a serious habitat risk. This study assesses citrus industrial processes and the paths that chemical substances follow from the time the citrus seed is planted until consumers get a final product as either fresh fruit or processed product. The study is built on information from United States Environmental Protection Agency (US EPA) manuals, Dade County Environmental Resources Management (DERM) inspection records, United States Food and Drug Administration (US FDA) regulations, Florida standards, journal publications, and research reports. Pollution prevention (P2 or prevention-of-pollution) alternatives are identified; alternatives are proposed, evaluated, and included. Strategies are described and pollution prevention opportunities proposed to minimize citrus wastes generation, chemical residuals in products, their environmental impact and health risk aspects while maximizing product quality.

Waveguide microgripper for identification, sensing and manipulation

A Waveguide Microgripper utilizes flexible optical waveguides as gripping arms, which provide the physical means for grasping a microobject, while simultaneously enabling light to be delivered and collected. This unique capability allows extensive optical characterization of the structure being held such as transmission, reflection or fluorescence. One of the simplest capabilities of the waveguide microgripper is to be able to detect the presence of a microobject between the microgripper facets by monitoring the transmitted intensity of light coupled through the facets. The intensity of coupled light is expected to drop when there is an object obstructing the path of light. The optical sensing and characterization function of the microgripper is a strong function of the optical power incident on the structure of interest. Hence it is important to understand the factors affecting the power distribution across the facet. The microgripper is also capable of detecting the fluorescence. This capability of microgripper is expected to have applications in medical, bio-medical and related fields.

The potential of solid phase microextraction (spme) for the recovery of explosives followed by gas and liquid chromatographic analysis

The potential of solid phase microextraction (SPME) in the analysis of explosives is demonstrated. A sensitive, rapid, solventless and inexpensive method for the analysis of explosives and explosive odors from solid and liquid samples has been optimized using SPME followed by HPLC and GC/ECD. SPME involves the extraction of the organic components in debris samples into sorbent-coated silica fibers, which can be transferred directly to the injector of a gas chromatograph. SPME/HPLC requires a special desorption apparatus to elute the extracted analyte onto the column at high pressure. Re suits for use of GC[ECD is presented and compared to the results gathered by using HPLC analysis. The relative effects of controllable variables including fiber chemistry, adsorption and desorption temperature, extraction time, and desorption time have been optimized for various high explosives.

Analysis of the lateral diffuse metal-oxide semiconductor (LDMOS) power amplifier for cellular base stations

The primary purpose of this thesis was to present a theoretical large-signal analysis to study the power gain and efficiency of a microwave power amplifier for LS-band communications using software simulation. Power gain, efficiency, reliability, and stability are important characteristics in the power amplifier design process. These characteristics affect advance wireless systems, which require low-cost device amplification without sacrificing system performance. Large-signal modeling and input and output matching components are used for this thesis. Motorola's Electro Thermal LDMOS model is a new transistor model that includes self-heating affects and is capable of small-large signal simulations. It allows for most of the design considerations to be on stability, power gain, bandwidth, and DC requirements. The matching technique allows for the gain to be maximized at a specific target frequency. Calculations and simulations for the microwave power amplifier design were performed using Matlab and Microwave Office respectively. Microwave Office is the simulation software used in this thesis. The study demonstrated that Motorola's Electro Thermal LDMOS transistor in microwave power amplifier design process is a viable solution for common-source amplifier applications in high power base stations. The MET-LDMOS met the stability requirements for the specified frequency range without a stability-improvement model. The power gain of the amplifier circuit was improved through proper microwave matching design using input/output-matching techniques. The gain and efficiency of the amplifier improve approximately 4dB and 7.27% respectively. The gain value is roughly .89 dB higher than the maximum gain specified by the MRF21010 data sheet specifications. This work can lead to efficient modeling and development of high power LDMOS transistor implementations in commercial and industry applications.