32 resultados para Amp C
Resumo:
Miniaturized, self-sufficient bioelectronics powered by unconventional micropower may lead to a new generation of implantable, wireless, minimally invasive medical devices, such as pacemakers, defibrillators, drug-delivering pumps, sensor transmitters, and neurostimulators. Studies have shown that micro-enzymatic biofuel cells (EBFCs) are among the most intuitive candidates for in vivo micropower. In the fisrt part of this thesis, the prototype design of an EBFC chip, having 3D intedigitated microelectrode arrays was proposed to obtain an optimum design of 3D microelectrode arrays for carbon microelectromechanical systems (C-MEMS) based EBFCs. A detailed modeling solving partial differential equations (PDEs) by finite element techniques has been developed on the effect of 1) dimensions of microelectrodes, 2) spatial arrangement of 3D microelectrode arrays, 3) geometry of microelectrode on the EBFC performance based on COMSOL Multiphysics. In the second part of this thesis, in order to investigate the performance of an EBFC, behavior of an EBFC chip performance inside an artery has been studied. COMSOL Multiphysics software has also been applied to analyze mass transport for different orientations of an EBFC chip inside a blood artery. Two orientations: horizontal position (HP) and vertical position (VP) have been analyzed. The third part of this thesis has been focused on experimental work towards high performance EBFC. This work has integrated graphene/enzyme onto three-dimensional (3D) micropillar arrays in order to obtain efficient enzyme immobilization, enhanced enzyme loading and facilitate direct electron transfer. The developed 3D graphene/enzyme network based EBFC generated a maximum power density of 136.3 μWcm-2 at 0.59 V, which is almost 7 times of the maximum power density of the bare 3D carbon micropillar arrays based EBFC. To further improve the EBFC performance, reduced graphene oxide (rGO)/carbon nanotubes (CNTs) has been integrated onto 3D mciropillar arrays to further increase EBFC performance in the fourth part of this thesisThe developed rGO/CNTs based EBFC generated twice the maximum power density of rGO based EBFC. Through a comparison of experimental and theoretical results, the cell performance efficiency is noted to be 67%.
Resumo:
Hepatitis C infection (HCV) continues to disproportionately affect Hispanics/Latinos in the United States. Hispanic/Latino intravenous drug users (IDUs), because of their risky injection and sexual behaviors, are prone to HCV infection and rapid transmission of the virus to others via several routes. With a prevalence rate of approximately 75% among IDUs, it is imperative that transmission of HCV be prevented in this population. This study aims to examine the associations between demographic, injection and sexual risk factors to HCV infection in a group Hispanic/Latino IDUs in Miami-Dade County, Florida. Preliminary unadjusted results in this sample reveal that age (OR=4.592, p=0.004), weekly injection (OR=5.171, p=0.000), daily injection frequency (OR=3.856, p=0.000) and use of a dirty needle (OR=2.320, p= 0.006) were all significantly associated with HCV infection. Being born outside the U.S. was significantly negatively associated with HCV infection (OR=0.349, p=0.004). Additionally, having two or more sex partners in the past three months (OR=0.472, p=0.014) was negatively associated with HCV infection. After adjusting for all other variables, older age (AOR=7.470, p=0.006), weekly injection (AOR=3.238, p=0.007) and daily injection frequency (AOR=2.625, p=0.010) were all significantly associated with HCV infection. Being born outside the U.S. (AOR=0.369, p=0.019) was a significant protective factor for HCV infection, along with having two or more sex partners in the past three months (AOR=0.481, p=0.037). When analyzing the significant variables in a backward regression model, having 2 or more sex partners in the past three months was not significant at the p