Motion correction algorithm of lung tumors for respiratory gated PET images

Respiratory gating in lung PET imaging to compensate for respiratory motion artifacts is a current research issue with broad potential impact on quantitation, diagnosis and clinical management of lung tumors. However, PET images collected at discrete bins can be significantly affected by noise as there are lower activity counts in each gated bin unless the total PET acquisition time is prolonged, so that gating methods should be combined with imaging-based motion correction and registration methods. The aim of this study was to develop and validate a fast and practical solution to the problem of respiratory motion for the detection and accurate quantitation of lung tumors in PET images. This included: (1) developing a computer-assisted algorithm for PET/CT images that automatically segments lung regions in CT images, identifies and localizes lung tumors of PET images; (2) developing and comparing different registration algorithms which processes all the information within the entire respiratory cycle and integrate all the tumor in different gated bins into a single reference bin. Four registration/integration algorithms: Centroid Based, Intensity Based, Rigid Body and Optical Flow registration were compared as well as two registration schemes: Direct Scheme and Successive Scheme. Validation was demonstrated by conducting experiments with the computerized 4D NCAT phantom and with a dynamic lung-chest phantom imaged using a GE PET/CT System. Iterations were conducted on different size simulated tumors and different noise levels. Static tumors without respiratory motion were used as gold standard; quantitative results were compared with respect to tumor activity concentration, cross-correlation coefficient, relative noise level and computation time. Comparing the results of the tumors before and after correction, the tumor activity values and tumor volumes were closer to the static tumors (gold standard). Higher correlation values and lower noise were also achieved after applying the correction algorithms. With this method the compromise between short PET scan time and reduced image noise can be achieved, while quantification and clinical analysis become fast and precise.

A phenomenological exploration of Black male law enforcement officers' perspectives of racial profiling and their law enforcement career exploration and commitment

This phenomenological study explored Black male law enforcement officers' perspectives of how racial profiling shaped their decisions to explore and commit to a law enforcement career. Criterion and snow ball sampling was used to obtain the 17 participants for this study. Super's (1990) archway model was used as the theoretical framework. The archway model "is designed to bring out the segmented but unified and developmental nature of career development, to highlight the segments, and to make their origin clear" (Super, 1990, p. 201). Interview data were analyzed using inductive, deductive, and comparative analyses. Three themes emerged from the inductive analysis of the data: (a) color and/or race does matter, (b) putting on the badge, and (c) too black to be blue and too blue to be black. The deductive analysis used a priori coding that was based on Super's (1990) archway model. The deductive analysis revealed the participants' career exploration was influenced by their knowledge of racial profiling and how others view them. The comparative analysis between the inductive themes and deductive findings found the theme "color and/or race does matter" was present in the relationships between and within all segments of Super's (1990) model. The comparative analysis also revealed an expanded notion of self-concept for Black males – marginalized and/or oppressed individuals. Self-concepts, "such as self-efficacy, self-esteem, and role self-concepts, being combinations of traits ascribed to oneself" (Super, 1990, p. 202) do not completely address the self-concept of marginalized and/or oppressed individuals. The self-concept of marginalized and/or oppressed individuals is self-efficacy, self-esteem, traits ascribed to oneself expanded by their awareness of how others view them. (DuBois, 1995; Freire, 1970; Sheared, 1990; Super, 1990; Young, 1990). Ultimately, self-concept is utilized to make career and life decisions. Current human resource policies and practices do not take into consideration that negative police contact could be the result of racial profiling. Current human resource hiring guidelines penalize individuals who have had negative police contact. Therefore, racial profiling is a discriminatory act that can effectively circumvent U.S. Equal Employment Opportunities Commission laws and serve as a boundary mechanism to employment (Rocco & Gallagher, 2004).

Motion Correction Algorithm of Lung Tumors for Respiratory Gated PET Images

Respiratory gating in lung PET imaging to compensate for respiratory motion artifacts is a current research issue with broad potential impact on quantitation, diagnosis and clinical management of lung tumors. However, PET images collected at discrete bins can be significantly affected by noise as there are lower activity counts in each gated bin unless the total PET acquisition time is prolonged, so that gating methods should be combined with imaging-based motion correction and registration methods. The aim of this study was to develop and validate a fast and practical solution to the problem of respiratory motion for the detection and accurate quantitation of lung tumors in PET images. This included: (1) developing a computer-assisted algorithm for PET/CT images that automatically segments lung regions in CT images, identifies and localizes lung tumors of PET images; (2) developing and comparing different registration algorithms which processes all the information within the entire respiratory cycle and integrate all the tumor in different gated bins into a single reference bin. Four registration/integration algorithms: Centroid Based, Intensity Based, Rigid Body and Optical Flow registration were compared as well as two registration schemes: Direct Scheme and Successive Scheme. Validation was demonstrated by conducting experiments with the computerized 4D NCAT phantom and with a dynamic lung-chest phantom imaged using a GE PET/CT System. Iterations were conducted on different size simulated tumors and different noise levels. Static tumors without respiratory motion were used as gold standard; quantitative results were compared with respect to tumor activity concentration, cross-correlation coefficient, relative noise level and computation time. Comparing the results of the tumors before and after correction, the tumor activity values and tumor volumes were closer to the static tumors (gold standard). Higher correlation values and lower noise were also achieved after applying the correction algorithms. With this method the compromise between short PET scan time and reduced image noise can be achieved, while quantification and clinical analysis become fast and precise.

A Phenomenological Exploration of Black Male Law Enforcement Officers' Perspectives of Racial Profiling and Their Law Enforcement Career Exploration and Commitment

This phenomenological study explored Black male law enforcement officers’ perspectives of how racial profiling shaped their decisions to explore and commit to a law enforcement career. Criterion and snow ball sampling was used to obtain the 17 participants for this study. Super’s (1990) archway model was used as the theoretical framework. The archway model “is designed to bring out the segmented but unified and developmental nature of career development, to highlight the segments, and to make their origin clear” (Super, 1990, p. 201). Interview data were analyzed using inductive, deductive, and comparative analyses. Three themes emerged from the inductive analysis of the data: (a) color and/or race does matter, (b) putting on the badge, and (c) too black to be blue and too blue to be black. The deductive analysis used a priori coding that was based on Super’s (1990) archway model. The deductive analysis revealed the participants’ career exploration was influenced by their knowledge of racial profiling and how others view them. The comparative analysis between the inductive themes and deductive findings found the theme “color and/or race does matter” was present in the relationships between and within all segments of Super’s (1990) model. The comparative analysis also revealed an expanded notion of self-concept for Black males – marginalized and/or oppressed individuals. Self-concepts, “such as self-efficacy, self-esteem, and role self-concepts, being combinations of traits ascribed to oneself” (Super, 1990, p. 202) do not completely address the self-concept of marginalized and/or oppressed individuals. The self-concept of marginalized and/or oppressed individuals is self-efficacy, self-esteem, traits ascribed to oneself expanded by their awareness of how others view them. (DuBois, 1995; Freire, 1970; Sheared, 1990; Super, 1990; Young, 1990). Ultimately, self-concept is utilized to make career and life decisions. Current human resource policies and practices do not take into consideration that negative police contact could be the result of racial profiling. Current human resource hiring guidelines penalize individuals who have had negative police contact. Therefore, racial profiling is a discriminatory act that can effectively circumvent U.S. Equal Employment Opportunities Commission laws and serve as a boundary mechanism to employment (Rocco & Gallagher, 2004).

An examination of Lotka's law in the field of Library and Information Studies

The purpose of this study was to test Lotka’s law of scientific publication productivity using the methodology outlined by Pao (1985), in the field of Library and Information Studies (LIS). Lotka’s law has been sporadically tested in the field over the past 30+ years, but the results of these studies are inconclusive due to the varying methods employed by the researchers. ^ A data set of 1,856 citations that were found using the ISI Web of Knowledge databases were studied. The values of n and c were calculated to be 2.1 and 0.6418 (64.18%) respectively. The Kolmogorov-Smirnov (K-S) one sample goodness-of-fit test was conducted at the 0.10 level of significance. The Dmax value is 0.022758 and the calculated critical value is 0.026562. It was determined that the null hypothesis stating that there is no difference in the observed distribution of publications and the distribution obtained using Lotka’s and Pao’s procedure could not be rejected. ^ This study finds that literature in the field of Library and Information Studies does conform to Lotka’s law with reliable results. As result, Lotka’s law can be used in LIS as a standardized means of measuring author publication productivity which will lead to findings that are comparable on many levels (e.g., department, institution, national). Lotka’s law can be employed as an empirically proven analytical tool to establish publication productivity benchmarks for faculty and faculty librarians. Recommendations for further study include (a) exploring the characteristics of the high and low producers; (b) finding a way to successfully account for collaborative contributions in the formula; and, (c) a detailed study of institutional policies concerning publication productivity and its impact on the appointment, tenure and promotion process of academic librarians. ^

Interrogating Place, Space, Power and Identity: An Examination of Florida’s Geography Standards

In this paper, we examine Florida’s sixth-eighth grade geography standards to determine the potential for teaching critical geography, a field that interrogates space, place, power, and identity. While 57% of the standards demonstrated evidence of critical thinking, only six standards foster higher levels of critique consistent with critical geography.

Lateral load distribution for curved steel I -girder bridges

Lateral load distribution factor is a key factor for designing and analyzing curved steel I-girder bridges. In this dissertation, the effects of various parameters on moment and shear distribution for curved steel I-girder bridges were studied using the Finite Element Method (FEM). The parameters considered in the study were: radius of curvature, girder spacing, overhang, span length, number of girders, ratio of girder stiffness to overall bridge stiffness, slab thickness, girder longitudinal stiffness, cross frame spacing, and girder torsional inertia. The variations of these parameters were based on the statistical analysis of the real bridge database, which was created by extracting data from existing or newly designed curved steel I-girder bridge plans collected all over the nation. A hypothetical bridge superstructure model that was made of all the mean values of the data was created and used for the parameter study. ^ The study showed that cross frame spacing and girder torsional inertia had negligible effects. Other parameters had been identified as key parameters. Regression analysis was conducted based on the FEM analysis results and simplified formulas for predicting positive moment, negative moment, and shear distribution factors were developed. Thirty-three real bridges were analyzed using FEM to verify the formulas. The ratio of the distribution factor obtained from the formula to the one obtained from the FEM analysis, which was referred to as the g-ratio, was examined. The results showed that the standard deviation of the g-ratios was within 0.04 to 0.06 and the mean value of the g-ratios was greater than unity by one standard deviation. This indicates that the formulas are conservative in most cases but not overly conservative. The final formulas are similar in format to the current American Association of State Highway and Transportation Officials (AASHTO) Load Resistance and Factor Design (LRFD) specifications. ^ The developed formulas were compared with other simplified methods. The outcomes showed that the proposed formulas had the most accurate results among all methods. ^ The formulas developed in this study will assist bridge engineers and researchers in predicting the actual live load distribution in horizontally curved steel I-girder bridges. ^

Treason and trial : consuetudines and law in the romances of Chrétien de Troyes and the lais of Marie de France

Treason, in the romances of Chrdtien de Troyes and the lais of Marie de France, is explored more often as afin' amor problem than as a legal issue with its concomitant sociopolitical ramifications. It is precisely the historical function of literature within the ambit of court culture that appears to have shaped the legal context of the poems of Chrdtien de Troyes and the lais of Marie de France. Counterpoising the literary treatment of treason in Le Chevalier au Lion and Lanval with actions and definitions of treachery by contemporary, twelfth-century chronicle and customary law sources reveals that the conceptualized, fictional world of Chrdtien's Yvain closely reflects the workings of the Capetian society Chretien experienced. Marie's Lanval reflects as well the historical impressions of the Angevin court with which she had familiarity, a court whose concept of treason leaned more toward the maiestas concept found in Roman jurisprudence tradition.

An Examination of Lotka’s law in the Field of Library and Information Studies

The purpose of this study was to test Lotka’s law of scientific publication productivity using the methodology outlined by Pao (1985), in the field of Library and Information Studies (LIS). Lotka’s law has been sporadically tested in the field over the past 30+ years, but the results of these studies are inconclusive due to the varying methods employed by the researchers. A data set of 1,856 citations that were found using the ISI Web of Knowledge databases were studied. The values of n and c were calculated to be 2.1 and 0.6418 (64.18%) respectively. The Kolmogorov-Smirnov (K-S) one sample goodness-of-fit test was conducted at the 0.10 level of significance. The Dmax value is 0.022758 and the calculated critical value is 0.026562. It was determined that the null hypothesis stating that there is no difference in the observed distribution of publications and the distribution obtained using Lotka’s and Pao’s procedure could not be rejected. This study finds that literature in the field of library and Information Studies does conform to Lotka’s law with reliable results. As result, Lotka’s law can be used in LIS as a standardized means of measuring author publication productivity which will lead to findings that are comparable on many levels (e.g., department, institution, national). Lotka’s law can be employed as an empirically proven analytical tool to establish publication productivity benchmarks for faculty and faculty librarians. Recommendations for further study include (a) exploring the characteristics of the high and low producers; (b) finding a way to successfully account for collaborative contributions in the formula; and, (c) a detailed study of institutional policies concerning publication productivity and its impact on the appointment, tenure and promotion process of academic librarians.

Assessing the construct validity of a measure of learning agility

This study examined the construct validity of the Choices questionnaire that purported to support the theory of Learning Agility. Specifically, Learning Agility attempts to predict an individual's potential performance in new tasks. The construct validity will be measured by examining the convergent/discriminant validity of the Choices Questionnaire against a cognitive ability measure and two personality measures. The Choices Questionnaire did tap a construct that is unique to the cognitive ability and the personality measures, thus suggesting that this measure may have considerable value in personnel selection. This study also examined the relationship of this pew measure to job performance and job promotability. Results of this study found that the Choices Questionnaire predicted job performance and job promotability above and beyond cognitive ability and personality. Data from 107 law enforcement officers, along with two of their co-workers and a supervisor resulted in a correlation of .08 between Learning Agility and cognitive ability. Learning Agility correlated .07 with Learning Goal Orientation and. 17 with Performance Goal Orientation. Correlations with the Big Five Personality factors ranged from −.06 to. 13 with Conscientiousness and Openness to Experience, respectively. Learning Agility correlated .40 with supervisory ratings of job promotability and correlated .3 7 with supervisory ratings of overall job performance. Hierarchical regression analysis found incremental validity for Learning Agility over cognitive ability and the Big Five factors of personality for supervisory ratings of both promotability and overall job performance. A literature review was completed to integrate the Learning Agility construct into a nomological net of personnel selection research. Additionally, practical applications and future research directions are discussed. ^

Elemental analysis of glass and ink by laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) and laser induced breakdown spectroscopy (LIBS)

The necessity of elemental analysis techniques to solve forensic problems continues to expand as the samples collected from crime scenes grow in complexity. Laser ablation ICP-MS (LA-ICP-MS) has been shown to provide a high degree of discrimination between samples that originate from different sources. In the first part of this research, two laser ablation ICP-MS systems were compared, one using a nanosecond laser and another a femtosecond laser source for the forensic analysis of glass. The results showed that femtosecond LA-ICP-MS did not provide significant improvements in terms of accuracy, precision and discrimination, however femtosecond LA-ICP-MS did provide lower detection limits. In addition, it was determined that even for femtosecond LA-ICP-MS an internal standard should be utilized to obtain accurate analytical results for glass analyses. In the second part, a method using laser induced breakdown spectroscopy (LIBS) for the forensic analysis of glass was shown to provide excellent discrimination for a glass set consisting of 41 automotive fragments. The discrimination power was compared to two of the leading elemental analysis techniques, μXRF and LA-ICP-MS, and the results were similar; all methods generated >99% discrimination and the pairs found indistinguishable were similar. An extensive data analysis approach for LIBS glass analyses was developed to minimize Type I and II errors en route to a recommendation of 10 ratios to be used for glass comparisons. Finally, a LA-ICP-MS method for the qualitative analysis and discrimination of gel ink sources was developed and tested for a set of ink samples. In the first discrimination study, qualitative analysis was used to obtain 95.6% discrimination for a blind study consisting of 45 black gel ink samples provided by the United States Secret Service. A 0.4% false exclusion (Type I) error rate and a 3.9% false inclusion (Type II) error rate was obtained for this discrimination study. In the second discrimination study, 99% discrimination power was achieved for a black gel ink pen set consisting of 24 self collected samples. The two pairs found to be indistinguishable came from the same source of origin (the same manufacturer and type of pen purchased in different locations). It was also found that gel ink from the same pen, regardless of the age, was indistinguishable as were gel ink pens (four pens) originating from the same pack.

Optimization of wireless power transfer via magnetic resonance in different media

A wide range of non-destructive testing (NDT) methods for the monitoring the health of concrete structure has been studied for several years. The recent rapid evolution of wireless sensor network (WSN) technologies has resulted in the development of sensing elements that can be embedded in concrete, to monitor the health of infrastructure, collect and report valuable related data. The monitoring system can potentially decrease the high installation time and reduce maintenance cost associated with wired monitoring systems. The monitoring sensors need to operate for a long period of time, but sensors batteries have a finite life span. Hence, novel wireless powering methods must be devised. The optimization of wireless power transfer via Strongly Coupled Magnetic Resonance (SCMR) to sensors embedded in concrete is studied here. First, we analytically derive the optimal geometric parameters for transmission of power in the air. This specifically leads to the identification of the local and global optimization parameters and conditions, it was validated through electromagnetic simulations. Second, the optimum conditions were employed in the model for propagation of energy through plain and reinforced concrete at different humidity conditions, and frequencies with extended Debye's model. This analysis leads to the conclusion that SCMR can be used to efficiently power sensors in plain and reinforced concrete at different humidity levels and depth, also validated through electromagnetic simulations. The optimization of wireless power transmission via SMCR to Wearable and Implantable Medical Device (WIMD) are also explored. The optimum conditions from the analytics were used in the model for propagation of energy through different human tissues. This analysis shows that SCMR can be used to efficiently transfer power to sensors in human tissue without overheating through electromagnetic simulations, as excessive power might result in overheating of the tissue. Standard SCMR is sensitive to misalignment; both 2-loops and 3-loops SCMR with misalignment-insensitive performances are presented. The power transfer efficiencies above 50% was achieved over the complete misalignment range of 0°-90° and dramatically better than typical SCMR with efficiencies less than 10% in extreme misalignment topologies.

Fractal analysis of flocs formed in edible oil -water emulsions by image analysis techniques

Edible oil is an important contaminant in water and wastewater. Oil droplets smaller than 40 μm may remain in effluent as an emulsion and combine with other contaminants in water. Coagulation/flocculation processes are used to remove oil droplets from water and wastewater. By adding a polymer at proper dose, small oil droplets can be flocculated and separated from water. The purpose of this study was to characterize and analyze the morphology of flocs and floc formation in edible oil-water emulsions by using microscopic image analysis techniques. The fractal dimension, concentration of polymer, effect of pH and temperature are investigated and analyzed to develop a fractal model of the flocs. Three types of edible oil (corn, olive, and sunflower oil) at concentrations of 600 ppm (by volume) were used to determine the optimum polymer dosage and effect of pH and temperature. To find the optimum polymer dose, polymer was added to the oil-water emulsions at concentration of 0.5, 1.0, 1.5, 2.0, 3.0 and 3.5 ppm (by volume). The clearest supernatants obtained from flocculation of corn, olive, and sunflower oil were achieved at polymer dosage of 3.0 ppm producing turbidities of 4.52, 12.90, and 13.10 NTU, respectively. This concentration of polymer was subsequently used to study the effect of pH and temperature on flocculation. The effect of pH was studied at pH 5, 7, 9, and 11 at 30°C. Microscopic image analysis was used to investigate the morphology of flocs in terms of fractal dimension, radius of oil droplets trapped in floc, floc size, and histograms of oil droplet distribution. Fractal dimension indicates the density of oil droplets captured in flocs. By comparison of fractal dimensions, pH was found to be one of the most important factors controlling droplet flocculation. Neutral pH or pH 7 showed the highest degree of flocculation, while acidic (pH 5) and basic pH (pH 9 and pH 11) showed low efficiency of flocculation. The fractal dimensions achieved from flocculation of corn, olive, and sunflower oil at pH 7 and temperature 30°C were 1.2763, 1.3592, and 1.4413, respectively. The effect of temperature was explored at temperatures 20°, 30°, and 40°C and pH 7. The results of flocculation of oil at pH 7 and different temperatures revealed that temperature significantly affected flocculation. The fractal dimension of flocs formed in corn, olive and sunflower oil emulsion at pH 7 and temperature 20°, 30°, and 40°C were 1.82, 1.28, 1.29, 1.62, 1.36, 1.42, 1.36, 1.44, and 1.28, respectively. After comparison of fractal dimension, radius of oil droplets captured, and floc length in each oil type, the optimal flocculation temperature was determined to be 30°C. ^

Through the Prisms of Gender and Power: Agency in International Courtship between Colombian Women and American Men

Since 1999 Colombia has experienced dramatic increases in emigration, particularly the emigration of women towards the U.S. as fiancées of U.S. citizens or residents. Parallel to this trend is the increased number of websites facilitating these Colombian-American matches. This dissertation investigates the agency of Colombian women and American men who pursue romantic courtship through the services of International Marriage Brokers (IMBs) from the “Gendered Geographies of Power” (GGP) framework of analysis. It examines how both groups’ social locations, their positioning in multiple axes of differentiation including gender, nationality and social class, affects how and why they exert their agency across and within different geographic scales. Most importantly, it investigates the role the imagination plays (imagination work) in both men and women’s agency, an aspect of the GGP framework that has been under-researched and theorized to date. The research also finds that this imagination work is promoted and cultivated in deeply gendered ways by IMBs seeking to profit off this transnational courtship. Employing data collected via interviews and content analysis of IMBs’ websites, the dissertation analyzes comparatively the expectations each group (women, men and IMBs) bring to their imagination work and experiences of the courtship marketplace. A central question posed and answered in the dissertation is “What do women and men courting each other in cyberspace seek and do they find it?” The dissertation finds that the men seek “traditional” women and the women seek “liberated” less “macho” men. Ironically, the men find Colombian women who are among the most “liberated” women in their homeland but who downplay this aspect of themselves in order to strategically find a more modern man and migrate abroad where they expect to find greater personal and professional opportunities.

Elemental Analysis of Glass and Ink by Laser Ablation Inductively Coupled Plasma Mass Spectrometry (LA-ICP-MS) and Laser Induced Breakdown Spectroscopy (LIBS)

The necessity of elemental analysis techniques to solve forensic problems continues to expand as the samples collected from crime scenes grow in complexity. Laser ablation ICP-MS (LA-ICP-MS) has been shown to provide a high degree of discrimination between samples that originate from different sources. In the first part of this research, two laser ablation ICP-MS systems were compared, one using a nanosecond laser and another a femtosecond laser source for the forensic analysis of glass. The results showed that femtosecond LA-ICP-MS did not provide significant improvements in terms of accuracy, precision and discrimination, however femtosecond LA-ICP-MS did provide lower detection limits. In addition, it was determined that even for femtosecond LA-ICP-MS an internal standard should be utilized to obtain accurate analytical results for glass analyses. In the second part, a method using laser induced breakdown spectroscopy (LIBS) for the forensic analysis of glass was shown to provide excellent discrimination for a glass set consisting of 41 automotive fragments. The discrimination power was compared to two of the leading elemental analysis techniques, µXRF and LA-ICP-MS, and the results were similar; all methods generated >99% discrimination and the pairs found indistinguishable were similar. An extensive data analysis approach for LIBS glass analyses was developed to minimize Type I and II errors en route to a recommendation of 10 ratios to be used for glass comparisons. Finally, a LA-ICP-MS method for the qualitative analysis and discrimination of gel ink sources was developed and tested for a set of ink samples. In the first discrimination study, qualitative analysis was used to obtain 95.6% discrimination for a blind study consisting of 45 black gel ink samples provided by the United States Secret Service. A 0.4% false exclusion (Type I) error rate and a 3.9% false inclusion (Type II) error rate was obtained for this discrimination study. In the second discrimination study, 99% discrimination power was achieved for a black gel ink pen set consisting of 24 self collected samples. The two pairs found to be indistinguishable came from the same source of origin (the same manufacturer and type of pen purchased in different locations). It was also found that gel ink from the same pen, regardless of the age, was indistinguishable as were gel ink pens (four pens) originating from the same pack.