Desempenho reprodutivo de varrões e matrizes suínas de diferentes linhagens durante as estações do ano

The industrial Brazilian pig farming despite of the constant advance in the genetic improvement, nutrition, and in handling, seasonality problems occur in the production of weaned piglet, mainly due to the stations of the year that can impact directly in the profitability. These problems can be deepen due to breed and line of decent used in Brazil are all source from tempered weather countries. To the pig farmer it's difficult to determine the relations between indoor temperature of the barns, relative humidity of the air and top thermal amplitude which can provide good reproductive rates for the boars and arrays lodged in conventional barns. The lack research to production of environmental indices of easy interpretation to pigs, which are not dependent of complicated handling machines and also which are not expensive is considered as a negative factor from the producers. the objective os this experiment is evaluate the effects of the stations of the year over the reproductive performance of the boars Agroceres PIC 425, Agroceres PIC 337 and D.B. Dambred LM 6200, and of arrays Agroceres Canborough 22, Penarlan Naima e DB90 Danbred, in addition develop an environmental index with easy interpretation and use to the pig farmers of the region of Uberlândia - MG, using the maxim temperatures, rainfall monthly accumulated and of the thermal amplitude of the barn. The features rated during the stations of the years 2013 and 2014 were the volume and spermatic quality of the boars and the mainly reproductive indexes of the arrays as the total number of piglets born alive and total number of weaned piglets/ array/ parturition. The station of the year which had the worst results in the reproductive feature of the boars and arrays was the spring. Boars from different line of decent are sensitive to the effects of stress of the heat of spring causing lowest volume, concentration and problems in the spermatic morphology (p<0,05). The spring prejudice the reproductive indexes of arrays from different line of decent (p<0,05) and the pig farmers of Uberlândia are subjected to operating losses and income evasion due to the thermal stress in the reproduction that added can reach $150.000,00 annual for each 1000 arrays lodged/year.

Avaliação das condições de precipitação do azul da Prússia sobre pó de grafite visando o desenvolvimento de eletrodos de pasta de carbono para a quantificação de nitrito

An amperometric FIA method for nitrite quantification based on nitrite electroreduction and employing a carbon paste electrode (CPE) chemically modified with iron hexacyanoferrate (HCF) as an amperometric detector was developed. The influence of experimental conditions on the preparation of the electrode materials was evaluated and the materials obtained in each study were used for the development of modified electrodes. The electrochemical sensors were prepared by a fast, simple, and inexpensive procedure, and the long-term performance of the electrodes were quite satisfactory as the stability was maintained over one year. HCF was an effective redox mediator for nitrite electroreduction in acidic media, allowing nitrite detection at +0.2 V vs. Ag/AgClsat, which is a potential free of possible interfering species that are normally present in food and water samples. The electrochemical cell used in the FIA system was similar to a batch injection analysis cell, enabling recirculation of the carrier solution. This is an attractive feature because it allows the use of a high flow rate (6 mL min-1) leading to high sensitivity and analysis speed, while keeping reagent consumption low. The proposed method had a detection limit of 9 μmol L-1 and was successfully employed for nitrite quantification in spiked water and sausage samples. The obtained results were in good agreement with those provided by the spectrophotometric official method. At a 95 % confidence level it was not observed statistical differences neither in nitrite content nor in the precision provided by both methods. The experimental conditions for the synthesis of HCF were optimized and the best electrode material was prepared by mixing FeCl3, K4[Fe(CN)6] and carbon powder subjected to an acid and thermal treatment (400 ºC), followed by ultrasonic agitation at 4 °C. This material was used to construct an electrode with improved analytical performance to reduce nitrite, which presented greater stability compared to HCF film electrodeposited on the EPC, showing that the preparation procedure of the electrode material is an effective strategy for the development of HCF modified electrodes.

Resposta da batata cv. Cupido à fertilização organomineral

Potato crop cycle is relatively short and presents high yield per area; therefore, it is a very demanding culture for available nutrients in the soil solution. Despite its importance and the large number of studies about the crop, there is little research on plant nutrition regarding the use of organomineral fertilizer. This study evaluated potato, cv. Cupid, development and productivity as a function of fertilization with pelletized organomineral fertilizer. The experiment was done in Perdizes, Minas Gerais, in the rainy season of 2014/2015. The experimental design was a randomized blocks, with factorial arrangement of 4 x 2 (doses x management) and a control with mineral fertilizer, with 3 repetitions. Organomineral fertilizer doses were 25, 50, 75 and 100% of the conventional mineral dose, which was 600 kg ha-1 K2SO4, 850 kg ha-1 NH4H2PO4, and 300 kg ha-1 (NH4)2SO4 of topdressing 19 days after planting (DAP). Fertilization managements were with or without topdressing at 19 DAP, when the potato was hilled. Two plants per plot were sampled at 36, 50, 64 and 81 DAP and analyzed for leaf, stem and dry matter contents. DRIS - Diagnosis and Recommendation Integrated System was applied at 36 DAP and the potatoes were harvested 112 DAP and subjected to tuber classification. Throughout the cycle, stem, leaf and tuber dry mass showed no significant differences between the fertilization managements. The doses of organomineral fertilizer and topdressing management does not affect productivity, and the lower doses (25%) were similar the greater ones and the control, with an average of 16.8 t ha-1, demonstrating that it is viable to make a single application of organomineral fertilizer at planting due to operational efficiency. The low yields observed were due to high rainfall and temperature, creating favorable conditions for the incidence of pests and diseases. According to DRIS, the organomineral dose 75% for topdressing, presented the best nutritional balance.

Climatologia da pluviosidade na bacia hidrográfica do Rio Paranaíba

The main aim of this research was to study pluviosity in the Paranaíba Riverbasin, especially concerning the variability frame and trends. For this end, we used data from 22 pluviometric stations of the Agência Nacional da Águas- ANA(National Water Agency)spatially distributed throughout the basin area. The data comprised the years 1979-2013, which is a historical series of 35 years, and was downloaded through the ANA website and tabulated using the Hydro 1.2 software (2015) and Excel. After tabulation process were applied based methodologies for statistical analysis of annual variability, monthly, daily and seasonal rainfall in the basin beyond the trend analysis. Results of this research showed that the annual rainfall averageis 1491 mm. Seasonality is a hallmark and rainfall variability occurs spatially and temporally. Rains are accumulated in the rainy season accumulating 85% of the annual volume in the basin. In daily analysis it was found that the daily rainfall above 30 mm occur in only 3% of the time. Dry season comprises 15% of the rainfall. Trend analysis using linear regression pointed to a downward trend in rainfall in 46% of jobs, stability in 18% of posts and increased rainfall by 36%. As for the analysis using the sign test indicated that 32% of the analyzed rainfall stations showed an increasing trend of rainfall over the time series and 68% of stations showed downward trend. This research is important because shows how rainfall worksin the area of the Paranaiba basin, and may be used to develop better management of natural resources and the area through public policies for this purpose.

Investigação da rota biohidrometalúrgica com Acidithiobacillus ferrooxidans/thiooxidans para recuperação do cobalto de baterias de íons lítio descartadas

The recycling of metals from secondary sources can be advantageous. Among the metals of interest, we have cobalt, a metal used for various purposes. As regards the secondary sources of cobalt, the lithium-ion batteries can be considered, since they contain cobalt oxide in their composition (LiCoO2). This way, the objective of this work was to use the microorganism strains (Acidithiobacillus ferrooxidans and Acidithiobacillus thiooxidans) to bioleach the LiCoO2 extracted from discarded lithium ion batteries with emphasis on the recovery of cobalt for synthesis of new materials of interest. The lineage growth occurred in T&K medium and the growth investigation was made by observing the media, by platelet growth and microscope analysis. Then, the inoculum was standardized on 5 x 106 cells mL-1 and used in bioleaching tests. The bioleaching was investigated: the microorganism nature: separate strains and A. ferrooxidans and A. thiooxidans consortium, bioleaching time (0 to 40 days), inoculum proportion (5 to 50% v/v), energy source (iron and sulfur) and residue concentration (1063 to 8500 mg L-1 of cobalt). The cobalt concentration in the media was found by atomic absorption spectrometry and the medium pH was monitored during the bioleaching. The results show that the amount of bioleached cobalt increases with time and the iron concentration. The bioleaching with A. thiooxidans was not influenced by the addition of sulfur. The use of the two lineages together did not improve the bioleaching rates. Among the lineages, the A. thiooxidans presented better results and was able to bioleach cobalt amounts above 50% in most of the experiments. A. thiooxidans presented lower bioleaching rates, with a maximum of 50% after 24 days of experiment. After reprocessing by bioleaching, the cobalt in solution was used for synthesis of new materials: such as LiCoO2 cathode and as adsorbent pesticide double lamellar hydroxide (HDL Co-Al-Cl) by the Pechini and co-precipitation methods. The reprocessed LiCoO2 presented a unique stoichiometric phase relative to the HT-LiCoO2 structure similar to the JCPDS 44-0145, presenting electrochemical activity when tested as a cathode material. The double lamellar hydroxide Co-Al-Cl was tested as pesticide adsorbent, being possible to adsorb around 100% of the pesticide. The bioleaching was efficient in the recovery of cobalt present in lithium-ion batteries and microorganisms presented high tolerance to the residue, being able to bioleach even at higher LiCoO2 concentrations. The cobalt bioleaching medium did not impair the synthesis phases and the obtained materials presented structure and activity similar to the sintered materials from the reagents containing cobalt.