O /R/ em posição de coda silábica na cidade de Uberlândia

The aim of this research is to describe and analyze the realization of the /R/ at the end of the syllable (coda) in the city of Uberlândia-MG, taking into account variationist aspects and possible phonological phenomena that permeates the variable realization of this segment. We used the labovian variationist methodology, that gave us the needed support to investigate and systematize the variation of one linguistic community. The corpus was compound by 5139 occurrences of /R/, which 2528 were retroflex realizations, 2480 were deletions and 132 were occurrences of other segments. The informants of this research were stratified by: sex; age group; scholarly; they were born in Uberlândia or they arrived in this city before fifth birthday. Beyond the extralinguistic variables (sex, age group and scholarty), we established as linguistic variables: following context; previous context; tonicity of syllable; lexical item; coda position in the syllable; and, at last, the word size. After the statistic analisis computed by the Goldvarb software, the favoring contexts to the retroflex realization were: coronal segments in the following context; labial segments in the previous context; unstressed syllables; nouns and others (non verbs); and words with one syllable. The favoring contexts to deletion were: dorsal segments int the following context and verbs. The extra linguistic variables favored the variation less scholarty. So, the factors male sex and age group from 26 to 49 years favored the retroflex variant, while the factors female and the age group with more than 49 years favored the deletion.

Análise das principais variáveis na flotação industrial do complexo de mineração de Tapira - MG

Faced with an agribusiness expansion scenario and the increase in fertilizer consumption due to the exponential growth of the population, it is necessary to make better use of existing reserves, by obtaining products of better quality and in adequate quantities to meet demand national. In Tapira Mining Complex, Vale Fertilizantes, the phosphate concentrate is produced with content of 35.0% P2O5 from ore with content of about 8.0% P2O5, which are intended to supply Complex Industrial Uberaba and Araxá Minero Chemical Complex for the production of fertilizers. The industrial flotation step responsible for the recovery of P2O5 and hence the viability of the business is divided into the crumbly, grainy and ultrathin circuits, and, friable and granular concentrate comprise the conventional concentrated. Today only 14.7% of the mass which feeds the mill product becomes, the remainder being considered losses in the process, and the larger mass losses are located in the waste of flotation, representing 42.3%. From 2012 to 2014, the daily global mass recovery processing plants varied from 12.4 to 15.9% while the daily metallurgical recovery of P2O5 from 48.7 to 82.4%. By the degree of variability, it appears that the plant operated under different conditions. Seen this, this study aimed to analyze the influence of operational and process variables in P2O5 mass and metallurgical recoveries of industrial flotation circuits of grainy, crumbly and ultrathin. And besides was made an analysis of the effect of ore variables, as degrees, hardnesse and the ore front 02 percentage, in global recoveries of processing plant and the effect of dosages of reagents in the recoveries obtained from the bench flotation using the experimental design methodology. All work was performed using the historical database of Vale Fertilizantes of Tapira-MG, where all independent variables were dimensionless as the experimental range used. To make the statistical analysis it used the response surface technique and the values of the independent variables that maximize recoveries were found by canonical analysis. In the study of industrial flotation circuit crispy were obtained from 41.3% mass recovery and 91.3% metallurgical recovery P2O5, good values for the circuit, and the highest recoveries occur for solids concentration of the new flotation power between 45 and 50%, which values are assigned to the residence time of the pulp in cells and industrial flotation columns. The greater the number of ore heaps resumed on the higher the mass recovery, but in this scenario flotation becomes unstable because there is enormous weight variation in the feed. Higher recoveries are obtained for mass depressant dosage exceeding 120 g / t for synthetic collector dosage of 11.6%. In the study of industrial flotation circuit of the granulate were obtained 28.3% to 79.4% mass recovery and metallurgical recovery of P2O5 being considered good values for the circuit. Higher recoveries are obtained when the front ore 02 percentage is above 90%, because the ore of this front have more clear apatite. Likewise recoveries increase when the level of pulp rougher step is highest due to the high mass of circulating step receives loads. In the analysis of industrial flotation circuit of the ultrafine were obtained 23.95% of mass recovery, and the same is maximized to depressant dosage and the top collector 420 and 300 g / t, respectively. The analysis of the influence of variables ore, it was observed that higher recoveries are obtained for ores with P2O5 content above 8.0%, Fe2O3 content in the order of 28% forward and 02 of ore percentage of 83%. Hard ore percentage has strong influence on recoveries due to mass division in the circuit that is linked to this variable. However, the hard ore percentage that maximizes recoveries was very close to the design capacity of the processing plant, which is 20%. Finally, the study of the bench flotation, has noted that in friable and granular circuits the highest recoveries are achieved for a collector dosage exceeding 250 g / t and the simultaneous increase of collector dosage and synthetic collector percentage contributes to the increase recovery in the flotation, but this scenario is suitable to produce a concentrate poorer in terms of P2O5 content, showing that higher recovery is not always the ideal scenario. Thus, the results show the values of variables that provide higher recoveries in the flotation and hence lower losses in the waste.

Fatores pré-abate que influenciam na qualidade da carne de frangos griller

The consumption of a product is directly linked to its quality, and are required to comply with quality standard regulations. In chicken "griller" which comes from industrial strains, selected for best growth performance, shot with up to 35 days old and weighing 1,400kg, they have not been reported in the literature a number of quality aspects This study aimed determine the muscle transformation time in the flesh in chickens "griller" incidence of meat defects, "PSE" (pale, soft and exdudative) and "DFD" (dark, firm and dry) and their correlation between different window times slaughter (total time between beginning of the fasting and the time of slaughter) and pH curve, four different times post mortem. The base data for the study was composed of information of 208 chickens, collected between August and September 2014, in a slaughterhouse slaughtering chickens in the middle region of Triangulo Mineiro and Alto Paranaíba. We used the Minitab 17.1.0 program for the development of descriptive statistical analysis and Pareto charts. The Pearson correlation was used to evaluate the linear relationship between two variables and Excel 2013, Microsoft Office®, to produce tables and graphs. The analysis consisted of 11 chickens cities and the distance to the poultry slaughterhouse ranged from 24.5 km to 123 km. It was observed that the pH curve decays gradually until time 5horas after slaughter, and its increase was 24, indicating the transformation of the muscle meat. The incidence of regular meat was 39.9%, "DFD" 30.3% and "PSE" 29.8%. For "DFD" meat, it was observed that factors: low ambient temperature, longer transportation and fast window and mileage at dirt road, contributed to its occurrence (p <0.05). For "PSE" meat, it was observed that lower body weight factors, longer transport favored frequency (p <0.05) of the meat defect. There was no significant correlation in variance analysis between distance, waiting time at rest shed and humidity related to meat defects (p> 0.05). This high incidence of defects meat may be due to pre-slaughter stress factors.

Avaliação das condições de precipitação do azul da Prússia sobre pó de grafite visando o desenvolvimento de eletrodos de pasta de carbono para a quantificação de nitrito

An amperometric FIA method for nitrite quantification based on nitrite electroreduction and employing a carbon paste electrode (CPE) chemically modified with iron hexacyanoferrate (HCF) as an amperometric detector was developed. The influence of experimental conditions on the preparation of the electrode materials was evaluated and the materials obtained in each study were used for the development of modified electrodes. The electrochemical sensors were prepared by a fast, simple, and inexpensive procedure, and the long-term performance of the electrodes were quite satisfactory as the stability was maintained over one year. HCF was an effective redox mediator for nitrite electroreduction in acidic media, allowing nitrite detection at +0.2 V vs. Ag/AgClsat, which is a potential free of possible interfering species that are normally present in food and water samples. The electrochemical cell used in the FIA system was similar to a batch injection analysis cell, enabling recirculation of the carrier solution. This is an attractive feature because it allows the use of a high flow rate (6 mL min-1) leading to high sensitivity and analysis speed, while keeping reagent consumption low. The proposed method had a detection limit of 9 μmol L-1 and was successfully employed for nitrite quantification in spiked water and sausage samples. The obtained results were in good agreement with those provided by the spectrophotometric official method. At a 95 % confidence level it was not observed statistical differences neither in nitrite content nor in the precision provided by both methods. The experimental conditions for the synthesis of HCF were optimized and the best electrode material was prepared by mixing FeCl3, K4[Fe(CN)6] and carbon powder subjected to an acid and thermal treatment (400 ºC), followed by ultrasonic agitation at 4 °C. This material was used to construct an electrode with improved analytical performance to reduce nitrite, which presented greater stability compared to HCF film electrodeposited on the EPC, showing that the preparation procedure of the electrode material is an effective strategy for the development of HCF modified electrodes.