Extensões na arquitetura SDN para o provisionamento de QoS através do monitoramento e uso de múltiplos caminhos

The substantial increase in the number of applications offered through the computer networks, as well as in the volume of traffic forwarded through the network, have hampered to assure adequate service level to users. The Quality of Service (QoS) offer, honoring specified parameters in Service Level Agreements (SLA), established between the service providers and their clients, composes a traditional and extensive computer networks’ research area. Several schemes proposals for the provision of QoS were presented in the last three decades, but the acting scope of these proposals is always limited due to some factors, including the limited development of the network hardware and software, generally belonging to a single manufacturer. The advent of Software Defined Networking (SDN), along with the maturation of its main materialization, the OpenFlow protocol, allowed the decoupling between network hardware and software, through an architecture which provides a control plane and a data plane. This eases the computer networks scenario, allowing that new abstractions are applied in the hardware composing the data plane, through the development of new software pieces which are executed in the control plane. This dissertation investigates the QoS offer through the use and extension of the SDN architecture. Based on the proposal of two new modules, one to perform the data plane monitoring, SDNMon, and the second, MP-ROUTING, developed to determine the use of multiple paths in the forwarding of data referring to a flow, we demonstrated in this work that some QoS metrics specified in the SLAs, such as bandwidth, can be honored. Both modules were implemented and evaluated through a prototype. The evaluation results referring to several aspects of both proposed modules are presented in this dissertation, showing the obtained accuracy of the monitoring module SDNMon and the QoS gains due to the utilization of multiple paths defined by the MP-Routing, when forwarding data flow through the SDN.

Greenow: um algoritmo de roteamento orientado a workspace para uma arquitetura de Internet do futuro

Current and future applications pose new requirements that Internet architecture is not able to satisfy, like Mobility, Multicast, Multihoming, Bandwidth Guarantee and so on. The Internet architecture has some limitations which do not allow all future requirements to be covered. New architectures were proposed considering these requirements when a communication is established. ETArch (Entity Title Architecture) is a new Internet architecture, clean slate, able to use application’s requirements on each communication, and flexible to work with several layers. The Routing has an important role on Internet, because it decides the best way to forward primitives through the network. In Future Internet, all requirements depend on the routing. Routing is responsible for deciding the best path and, in the future, a better route can consider Mobility aspects or Energy Consumption, for instance. In the dawn of ETArch, the Routing has not been defined. This work provides intra and inter-domain routing algorithms to be used in the ETArch. It is considered that the route should be defined completely before the data start to traffic, to ensure that the requirements are met. In the Internet, the Routing has two distinct functions: (i) run specific algorithms to define the best route; and (ii) to forward data primitives to the correct link. In traditional Internet architecture, the two Routing functions are performed in all routers everytime that a packet arrives. This work allows that the complete route is defined before the communication starts, like in the telecommunication systems. This work determined the Routing for ETArch and experiments were performed to demonstrate the control plane routing viability. The initial setup before a communication takes longer, then only forwarding of primitives is performed, saving processing time.

Configurações para métodos de acesso por escaneamento

The use of access technologies for communication, based on scanning methods, enables new communication opportunities for individuals with severe motor dysfunction. One of the most commom examples of this type of technology is the single switch scanning. Single switch scanning keyboards are often used as augmentative and alternative communication devices for inidividuals with severe mobility restrictions and with compromised speech and writing. They consist of a matrix of keys and simulate the operation of a physical keyboard to write messages. One of the limitations of these systems is their low performance. Low communication rates and considerable errors ocurrence are some of the few problems that users of these devices suffers during daily use. The development and evaluation of new strategies in augmentative and alternative communication are essential to improve the communication opportunities of user who make use of such technology. Thus, this work explores different strategies to increase communication rate and reduce user’s mistakes. Computational and practical analysis were performed for the evaluation of proposed strategies.

Avaliação tribológica de novas modificações superficiais para cilindros de laminação a frio

The present work analyzed the tribological behavior of coatings/surface modifications traditionally used in cold rolling mill rolls and new coatings/surface modificationswith potential to replace the carcinogenic hard chrome. The study started with identification of wear mechanisms occurring in real coldrollingmill rolls. Due the high cost and dimensions of the rolls, thereplication technique was used. Replicas were obtained from 4 different rolling millBrazilian companies before and after a normal rolling campaign. Initial sliding tests were conducted using spherical and cylindrical counter bodies in order to verifywhichtribological conditions allowed to reproduce the wear mechanisms found in the replicas. These tests indicated the use of reciprocating sliding tests with cylindrical counter bodies (line contact), normal load of 100 N, and test times of and 1 h and 5 h. Different surface modifications were carried out on samples produced from a fragment of a rolling mill roll. The specimens were heat treated and ground on both sides. After, some specimens were surface textured by electrical discharge texturing (EDT). For both groups (ground and EDT), subsequent treatments of chromium plating, electroless NiP coating and plasma nitriding were carried out. The results of the reciprocating tests showed that specimens with electroless NiP coating presented the lowest friction coefficients, while plasma nitrided specimens showed the highest. In general, previous surface texturing before the coating/surface modification increased the wear of the counter bodies. Oneexceptionwas for EDT with subsequent electroless NiP coating, which presented the lowest counter bodies wear rate. The samples withelectroless NiP coating promoted a tribolayer consisting of Nickel, Phosphorus and Oxygen on both the specimens andthecounter bodies, which was apparently responsible for the reduction of friction coefficient and wear rate. The increase of the test time reduced the wear rate of the samples, apparently due the stability of the tribolayers formed, except for the nitrided samples. For the textured specimens, NiP coating showed the best performance in maintaining the surface topography of the specimens after the sliding tests.

Classificação de nódulos pulmonares em imagens tomográficas utilizando redes neurais artificiais em cascata

Lung cancer is the most common of malignant tumors, with 1.59 million new cases worldwide in 2012. Early detection is the main factor to determine the survival of patients affected by this disease. Furthermore, the correct classification is important to define the most appropriate therapeutic approach as well as suggest the prognosis and the clinical disease evolution. Among the exams used to detect lung cancer, computed tomography have been the most indicated. However, CT images are naturally complex and even experts medical are subject to fault detection or classification. In order to assist the detection of malignant tumors, computer-aided diagnosis systems have been developed to aid reduce the amount of false positives biopsies. In this work it was developed an automatic classification system of pulmonary nodules on CT images by using Artificial Neural Networks. Morphological, texture and intensity attributes were extracted from lung nodules cut tomographic images using elliptical regions of interest that they were subsequently segmented by Otsu method. These features were selected through statistical tests that compare populations (T test of Student and U test of Mann-Whitney); from which it originated a ranking. The features after selected, were inserted in Artificial Neural Networks (backpropagation) to compose two types of classification; one to classify nodules in malignant and benign (network 1); and another to classify two types of malignancies (network 2); featuring a cascade classifier. The best networks were associated and its performance was measured by the area under the ROC curve, where the network 1 and network 2 achieved performance equal to 0.901 and 0.892 respectively.

Winter lovers: engajamento e participação no universo de game of thrones da internet

The formation of groups acquired new features with the arrival of the internet. The links before straitened between family, work groups and close friends today reach long distances through online communities. These communities represent groups that have affinities and common interests, and use the community space to discuss these. Examples of these communities are those related to franchise Game of Thrones, a literary phenomenon that has expanded by various media, including the social, television, and communities. This report aims to present the work steps and the theoretical reflection, necessary for the achievement of a final product in file format, which aimed to measure the engagement and participation of GOT fans on the Internet, especially in two Facebook GOT communities during the fifth season of the series aired on HBO.

A docência na educação superior: narrativas das diferenças políticas de sujeitos surdos

Deaf teachers presence at superior education triggers a series of reactions due to cultural differences. They feel the discomfort. The cultural difference defies the established power relations. From that emerge the trading spaces with their constant shocks about problems that affect the deaf teacher participation. The thesis goes through practice, resistance, resilience and political thinking of the deaf teacher at the Superior Education. Authors like: Foucault (2004), Hall (2009), Bhabha (1998), Touraine (2009) and Veiga-Netto (2010) underlie the concept of power relations that permeate this study. Perlin (2003); Ladd (2002) subsidize with the cultural focus. The investigation came from the question: How deaf teachers make their political stands in power relations established to the construction of their narratives at Superior Education? It had the goal of identify and chart the deaf teachers narratives at Superior Education. Leaving from the interview-narrative qualitative approach it was constituted a corpus with the collected narratives. These narratives were identified in order to achieve a thematic map express in the last chapter where the constant facts of the trading spaces of Superior Education shocks unfolds. The results point to an infinity of debates. The deaf teachers do not only present initial conditions of distress, doubt and difficulty at Superior Education, but also the disposition to discuss more the everyday power chains, waged by trading spaces. The identification of the narratives was vitally important to confirm the value of cultural and linguistic recognition as strategy for new politics to the structural power relations at the university context.