Determinação de teor de biodieseis de algodão e pinhão manso em misturas com diesel usando espectroscopia no infravermelho médio e quadrados mínimos parciais

Biodiesel is a renewable fuel derived from vegetable oils or animal fats, which can be a total or partial substitute for diesel. Since 2005, this fuel was introduced in the Brazilian energy matrix through Law 11.097 that determines the percentage of biodiesel added to diesel oil as well as monitoring the insertion of this fuel in market. The National Agency of Petroleum, Natural Gas and Biofuels (ANP) establish the obligation of adding 7% (v/v) of biodiesel to diesel commercialized in the country, making crucial the analytical control of this content. Therefore, in this study were developed and validated methodologies based on the use of Mid Infrared Spectroscopy (MIR) and Multivariate Calibration by Partial Least Squares (PLS) to quantify the methyl and ethyl biodiesels content of cotton and jatropha in binary blends with diesel at concentration range from 1.00 to 30.00% (v/v), since this is the range specified in standard ABNT NBR 15568. The biodiesels were produced from two routes, using ethanol or methanol, and evaluated according to the parameters: oxidative stability, water content, kinematic viscosity and density, presenting results according to ANP Resolution No. 45/2014. The built PLS models were validated on the basis of ASTM E1655-05 for Infrared Spectroscopy and Multivariate Calibration and ABNT NBR 15568, with satisfactory results due to RMSEP (Root Mean Square Error of Prediction) values below 0.08% (<0.1%), correlation coefficients (R) above 0.9997 and the absence of systematic error (bias). Therefore, the methodologies developed can be a promising alternative in the quality control of this fuel.

Caracterização e avaliação da atividade fotocatalítica de catalisadores baseados no TiO2, sintetizados mediante hidrólise em uma mistura de solventes

This study involved the synthesis of photocatalysts based on titanium dioxide (TiO2). The photocatalysts were synthesized by the sol-gel method using three different proportions of acetone (25%, 50% and 75% v/v) in water/acetone mixtures, in order to control the hydrolysis of the precursor of titanium (titanium tetraisopropoxide). Aiming to investigate the structural, morphological and electronic changes provoked by the use of the solvent mixtures, different methodologies were used to characterize the oxides, such as X-ray diffraction (XRD), RAMAN spectroscopy, UV-Vis diffuse reflectance spectroscopy, and measurements of specific surface area (BET). XRD combined to RAMAN analyses revealed that the products are two-phase highly crystalline oxides involving anatase as main phase and brookite. Besides, the refined XRD using the method of Rietveld demonstrated that the presence of acetone during the synthesis influenced in the composition of the crystalline phases, increasing the proportion of the brookite phase between 13 and 22%. The band gap energy of these oxides practically did not suffer changes as function of the synthesis conditions. As shown by the isotherm, these photocatalysts are mesoporous materials with mean diameter of pores of 7 nm and approximately 20% of porosity. The surface area of the oxides prepared by hydrolysis in presence of acetone was 12% higher compared to the bare oxide. After characterized, these oxides had their photocatalytic activities evaluated by photodegradation of the azo dyes Ponceau 4R (P4R), Tartrazine (TTZ) and Reactive Red 120 (RR120), and also by the ability to mediate the photocatalytic production of hydrogen. Using the most efficient photocatalyst, the mineralization achieved for the dyes P4R, RR120 and TTZ was of respectively 83%, 79% and 56% in 120 minutes of reaction, while the discoloration of P4R e RR120 reached 100% and 94% for TTZ. In addition, the same photocatalyst in the presence of 0.5% w/w of Platinum and suspended in a 5:1 v/v water/methanol mixture, produced 56 mmol of gaseous hydrogen in five hours of experiment, corresponding to a specific rate of hydrogen production of 139.5 mmol h-1 g-1.

Aplicação de espectroscopia no infravermelho médio e calibração multivariada para quantificação de adulterantes e teor em biodiesel de óleo de palma com óleo de soja, soja residual e diesel

In this work, it was developed and validated methodologies that were based on the use of Infrared Spectroscopy Mid (MIR) combined with multivariate calibration Square Partial Least (PLS) to quantify adulterants such as soybean oil and residual soybean oil in methyl and ethyl palm biodiesels in the concentration range from 0.25 to 30.00 (%), as well as to determine methyl and ethyl palm biodiesel content in their binary mixtures with diesel in the concentration range from 0.25 to 30.00 (%). The prediction results showed that PLS models constructed are satisfactory. Errors Mean Square Forecast (RMSEP) of adulteration and content determination showed values of 0.2260 (%), with mean error (EM) with values below 1.93 (%). The models also showed a strong correlation between actual and predicted values, staying above 0.99974. No systematic errors were observed, in accordance to ASTM E1655- 05. Thus the built PLS models, may be a promising alternative in the quality control of this fuel for possible adulterations or to content determination.

Fungicidas protetores no manejo da ferrugem da soja, processos fisiológicos e produtividade da cultura

Currently, the management recommendations for asian soybean rust (ASR) has been based on the application of protective fungicides mixed with triazoles and stronilurins. Thus, this study aimed at assessing whether the increased productivity provided by the application of protective fungicides is due solely to the fungicidal action of the product or some physiological changes in the plant and which the latter would be. The experiment was conducted from March to July 2015 at the experimental station of Udi Research and Development in Uberlândia-MG, with the cultivar 97Y07 RR. The experimental design chosen for this study was comprised of a randomized block with four replications and 16 treatments: check, fluxapyroxad + pyraclostrobin (116.55 + 58.45 g ha-1), azoxystrobin + benzovindiflupir (90 + 45 g ha-1), trifloxystrobin + prothioconazole (60 + 70 g ha-1), tebuconazole + picoxystrobin (100 + 60 g ha-1), picoxystrobin + cyproconazole (60 + 24 g ha-1), mancozeb (1125 g ha-1), azoxistrobina + tebuconazole + difenoconazole (60 + 75 + 120 g ha-1), azoxystrobin + tebuconazole + difenoconazole + chlorothalonil ( 60 + 120 + 75 + 1440 g ha-1), and mistures fluxapyroxad + pyraclostrobin + mancozeb, azoxystrobin + benzovindiflupir + mancozeb, trifloxystrobin + prothioconazole + mancozeb, tebuconazole + picoxystrobin + mancozeb, picoxystrobin + cyproconazole + mancozeb, azoxystrobin + tebuconazole + difenoconazole + mancozeb, and azoxystrobin + benzovindiflupir + chlorothalonil, from the aforesaid doses. The first application of the treatments occurred in R1, in the absence of symptoms. The number of applications, intervals and the use of adjuvants were performed according to the recommendations by manufacturers. The variables analyzed were: disease severity, concentration of chlorophylls and carotenoids, photosynthetic rate (A), transpiration rate (E), stomatal conductance (gs), internal carbon concentration (Ci), instantaneous efficiency in water use (A/E), intrinsic water use efficiency (A/gs), and carboxylation efficiency (A/C). With these data collected, this study set to date the progress curve of each variable (AUPC). At the end of the crop cycle, the average of pods per plant was quantified, grain per pod, productivity and weight of 1,000 grains. It was concluded that: the addition of mancozeb to fluxapyroxad + pyraclostrobin, azoxystrobin + benzovindiflupir, trifloxystrobin + prothioconazole and tebuconazole + picoxystrobin potentiated the ASR control; adding mancozebe to the mixture azoxystrobin + benzovindiflupir provided better control of the disease compared to the addition of chlorothalonil; mancozeb amounts to AUPC concentration of photosynthetic pigments and when added to axozystrobin + tebuconazole + difenoconazole, increases the AUPC for total chlorophyll concentration, as well as when chlorothalonil was added; mancozeb added to the mix fluxapyroxad + pyraclostrobin raised the AUPC for A/Ci and A/gs, increasing the W1,000G and crop productivity; the addition of protectors similarly reflected on the productivity of culture.