Exoenzimas em rações de frangos de corte

The study aimed to evaluate performance, relative weight of the small intestine, digestibility and deposition of minerals in the bone of broilers supplemented with enzymatic complex (carbohydrases and phytase) in sorghum-based diets or sorghum and millet. In the experiments based of sorghum and sorghum and millet were used 912 day-old male and female Hubbard Flex chicks (50:50) were distributed in a completely randomized design in a 2x2 factorial arrangement (Feed Control base Sorghum (Contcs); FeedReducedbase Sorghum (RedS); Feed Control base sorghum + Enzymatic Complex (Contcs + Enz);. Feed reduced base sorghum + Enzymatic Complex (RedS + Enz) in the study of feed basis of sorghum and millet the design was similar (Feed Control base sorghum + millet ( ContSM); Reduced feed based on Millet + Sorghum (RedSM); Feed Control based Sorghum + Millet + EnzimaticComplex (ContSM + Enz); Reduced Feed base Sorghum+ Millet + Enzimatic Complex (RedSM + Enz). At 35 and 42 days of age were determined performance data: feed intake (CR), body weight (BW), feed conversion (FC), viability (VIAB), relative weight of the small intestine and deposition of minerals in the bone. The digestibility was evaluated sorghum grain size (crushed and whole) with and without exoenzimatico complex. They used 32 birds, eight birds per treatment, in periods from 17 to 21 (initial) and 31 to 35 days of age (fattening). The exoenzimático complex used in feed favored the weight gain results, feed conversion and bone mineralization when compared to a control diet not added to enzymes, demonstrating its effect on non-starch polysaccharides and phosphorus phytic present as anti-nutritional factors in these diets, increasing the digestibility and supply of metabolizable energy, essential amino acids, methionine and lysine and calcium and phosphorus for bone formation. It is concluded that a safe strategy for inclusion in feed is based on the reduction of energy levels, essential amino acids, methionine and lysine and calcium and phosphorus in the expected result of the constant activity of the enzymes of this exoenzimático complex.

Fatores pré-abate que influenciam na qualidade da carne de frangos griller

The consumption of a product is directly linked to its quality, and are required to comply with quality standard regulations. In chicken "griller" which comes from industrial strains, selected for best growth performance, shot with up to 35 days old and weighing 1,400kg, they have not been reported in the literature a number of quality aspects This study aimed determine the muscle transformation time in the flesh in chickens "griller" incidence of meat defects, "PSE" (pale, soft and exdudative) and "DFD" (dark, firm and dry) and their correlation between different window times slaughter (total time between beginning of the fasting and the time of slaughter) and pH curve, four different times post mortem. The base data for the study was composed of information of 208 chickens, collected between August and September 2014, in a slaughterhouse slaughtering chickens in the middle region of Triangulo Mineiro and Alto Paranaíba. We used the Minitab 17.1.0 program for the development of descriptive statistical analysis and Pareto charts. The Pearson correlation was used to evaluate the linear relationship between two variables and Excel 2013, Microsoft Office®, to produce tables and graphs. The analysis consisted of 11 chickens cities and the distance to the poultry slaughterhouse ranged from 24.5 km to 123 km. It was observed that the pH curve decays gradually until time 5horas after slaughter, and its increase was 24, indicating the transformation of the muscle meat. The incidence of regular meat was 39.9%, "DFD" 30.3% and "PSE" 29.8%. For "DFD" meat, it was observed that factors: low ambient temperature, longer transportation and fast window and mileage at dirt road, contributed to its occurrence (p <0.05). For "PSE" meat, it was observed that lower body weight factors, longer transport favored frequency (p <0.05) of the meat defect. There was no significant correlation in variance analysis between distance, waiting time at rest shed and humidity related to meat defects (p> 0.05). This high incidence of defects meat may be due to pre-slaughter stress factors.

Características de virulência, resistência e diversidade genética de sorovares de Salmonella com impacto na saúde pública, isolados de frangos de corte no Brasil /

Salmonella Enteritidis, S. Typhimurium and S. Infantis are often associated with cases of human infections worldwide and is transmitted through consumption of contaminated food, particularly those of animal origin, especially chicken meat. This thesis was fractionated into three chapters, the first one relating to general considerations about the topics discussed in the following chapters. The second chapter aimed to evaluate virulence characteristics, antimicrobial resistance and the genetic similarity of 51 strains of S. Infantis isolated in samples of poultry origin from an industry located in the state of São Paulo, Brazil, during the 2009 to 2010 period. The third chapter aimed to analyze 111 strains of S. Enteritidis, 45 of Salmonella Typhimurium and 31 of Salmonella Typhimurium monophasic variant I 4, [5], 12:i:- isolated from chicken carcasses in different brazilian slaughterhouses from 2009 to 2011, and to estimate the risk to human health, based on the presence of virulence genes and antimicrobial resistance, correlating to the pathogenicity profiles (antimicrobial resistance and presence of virulence and resistance genes) with the genetic profile (ribogroup) of the isolates. To evaluate the antimicrobial susceptibility was performed the disk diffusion test for all serotypes of Salmonella, and exclusively to S. Enteritidis and S. Typhimurium, was also verified the minimum inhibitory concentration for ciprofloxacin and ceftazidime antibiotics. The presence of virulence genes invA (invasion), lpfA (fimbriae-adhesion), agfA (fimbriae-biofilm) and sefA (fimbriae-adhesion) were evaluated by PCR. The strains that showed resistance to antibiotics of β-lactams class were evaluated for the presence of resistance genes blaTEM, blaSHV, blaCTX-M and blaAmpC. For resistant strains to quinolones and fluoroquinolones antibiotics classes were searched the qnrA and qnrS genes. The phylogenetic relationship among the isolates was determined by RAPD method for S. Infantis strains, and by ribotyping technique to S. Enteritidis and S. Typhimurium.

Influência da utilização do fluido de corte com adição de grafeno na temperatura de usinagem e formação de rebarba no processo de micro fresamento

As time passed, humanity needed the development of new materials used in various activities. High strength materials such as titanium and Inconel for example, had been studied because they are widely used for implants in biomedicine, as well as their use in aerospace and automotive industries. Because of its thermal and mechanical properties, these materials are considered difficult to machine, promoting a rapid wear of cutting tools, primarily caused by the high temperatures in machining. With the development of new materials has emerged the need of developing new manufacturing processes. One of today’s innovative processes is the micro-manufacturing. Being a process with a defined cutting tool geometry, burr formation is a constant and undesirable phenomenon formed during the machininig process. Being detrimental to the manufacturing process, overspending deburring operations are constantly employed leading to increase the aggregate cost to the manufactured material. Assembly components are also impaired if there is no control of the burr, with consequences including the disposal of components due to the occurence of this phenomenon. This paper presents the study of micro-milling Inconel 718, investigating influential parameters in the formation of burrs in order to minimize the occurrence of this phenome non. Different feed rates per tooth and cutting speed are evaluated, and different cutting fluids with different methods of applying the fluid. Adding graphene to cutting fluids was considered as a variable to be investigated, which is considered an excellent solid lubricant, in addition to increasing the thermal conductivity of the cooling solution (AZIMI; MOZAF FARI, 2015). The micro-milling temperature was evaluated in the present work. It was observed a new phenomenon that causes the machined surface temperature decreases below room temperature when using the solution water + oil. This phenomenon is explained in further chapters. In order to unravel this phenomenon, a new test was proposed and, from this test, it can be concluded, comparatively, which cutting fluid has a better cooling property.Using cutting fluid with different thermal properties has shown influence when analy zing burr formation and reducing machining temperature.

Retificação plana tangencial dos ferros fundidos nodular, vermicular e cinzento em várias condições de corte

In a scenario of increasing competitiveness of the global industrial sector and with a consumer market increasingly demanding, there is an increased demand for new materials and, consequently, possibilities to explore new research and technological advances towards the development of new manufacturing methods or the improvement of existing technologies. In the case of cast irons, new grades of them have been developed so that their mechanical properties have been improved, making them more competitive with steel, expanding the applications and thus represents great economic gain for metallurgy and manufacturing sectors. This increases the interest and creates new opportunities to study these materials and identify how they respond in terms of the surface integrity, tool wear, cutting forces, among others, when machined by grinding operation. In this context, due to the lack of results from grinding of cast irons and studies comparing grindability among several grades of cast irons found in the literature, this work aims to generate scientific and technological contribution to the metallurgical and metal working sector through roughness results (Ra and Rz parameters) and evaluation and analysis of the subsurface integrity of three cast iron grades (gray, compacted graphite and nodular). The machining trials were performed on a surface grinding machine with silicon carbide grinding wheel at different cutting conditions. The input variables were the radial depth of cut (15 and 30 μm), worktable speed, vw (5 and 10 m/min) and the abrasive grain size of the grinding wheel. The results showed that surface roughness increased with the radial depth of cut for all materials tested; and the lowest values were obtained for gray cast iron. Also, roughness was sensitive to variation of worktable speed and the lowest values were obtained after machining with vw = 5 m/min. With respect to the abrasive grain size, as it decreased the roughness values increased to gray and nodular cast iron grades. Furthermore, grinding burns marks were observed on the surfaces of nodular cast iron and compacted graphite iron grades after grinding the smallest grain size, contrary to what is usually reported in literature. However, no evidence of severe thermal damages below the machined surfaces of all cast iron grades was observed after analyzing the results of hardness and the SEM micrograph images.