6 resultados para Energia termoelétrica, Brasil

em Universidade Federal de Uberlândia


Relevância:

30.00% 30.00%

Publicador:

Resumo:

Human development requires a broad balance between ecological, social and economic factors in order to ensure its own sustainability. In this sense, the search for new sources of energy generation, with low deployment and operation costs, which cause the least possible impact to the environment, has been the focus of attention of all society segments. To do so, the reduction in exploration of fossil fuels and the encouragement of using renewable energy resources for distributed generation have proved interesting alternatives to the expansion of the energy matrix of various countries in the world. In this sense, the wind energy has acquired an increasingly significant role, presenting increasing rates of power grid penetration and highlighting technological innovations such as the use of permanent magnet synchronous generators (PMSG). In Brazil, this fact has also been noted and, as a result, the impact of the inclusion of this source in the distribution and sub-transmission power grid has been a major concern of utilities and agents connected to Brazilian electrical sector. Thus, it is relevant the development of appropriate computational tools that allow detailed predictive studies about the dynamic behavior of wind farms, either operating with isolated load, either connected to the main grid, taking also into account the implementation of control strategies for active/reactive power generation and the keeping of adequate levels of voltage and frequency. This work fits in this context since it comprises mathematical and computational developments of a complete wind energy conversion system (WECS) endowed with PMSG using time domain techniques of Alternative Transients Program (ATP), which prides itself a recognized reputation by scientific and academic communities as well as by electricity professionals in Brazil and elsewhere. The modeling procedures performed allowed the elaboration of blocks representing each of the elements of a real WECS, comprising the primary source (the wind), the wind turbine, the PMSG, the frequency converter, the step up transformer, the load composition and the power grid equivalent. Special attention is also given to the implementation of wind turbine control techniques, mainly the pitch control responsible for keeping the generator under the maximum power operation point, and the vector theory that aims at adjusting the active/reactive power flow between the wind turbine and the power grid. Several simulations are performed to investigate the dynamic behavior of the wind farm when subjected to different operating conditions and/or on the occurrence of wind intensity variations. The results have shown the effectiveness of both mathematical and computational modeling developed for the wind turbine and the associated controls.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

This study describes the development of a prototype to evaluate the potential of environments based on two-dimensional modeling and virtual reality as power substations learning objects into training environments from a central operation and control of power utility Cemig. Initially, there was an identification modeling features and cognitive processes in 2D and RV, from which it was possible to create frames that serve to guide the preparation of a checklist with assigning a metric weight for measuring cognitive potential learning in the study sites. From these contents twenty-four questions were prepared and each was assigned a weight that was used in the calculation of the metric; the questions were grouped into skill sets and similar cognitive processes called categories. Were then developed two distinct environments: the first, the prototype features an interactive checklist and your individual results. And, second, a system of data management environment for the configuration and editing of the prototype, and the observation and analysis of the survey results. For prototype validation, were invited to access the virtual checklist and answer it, five professionals linked to Cemig's training area. The results confirmed the validity of this instrument application to assess the possible potential of modeling in 2D and RV as learning objects in power substations, as well as provide feedback to developers of virtual environments to improve the system.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Assessing the soil nutrient availability to plants under lab conditions is one of the main challenges to Soil Fertility and Chemistry, due to the complex behavior and the interaction of the soil properties. Many extractant solutions associated with mechanical forms of agitation have been proposed, showing different correlations with plant growth and nutrients absorption. Using ultrasonic energy is a agitation procedure of the soil:extractant solution suspension (based on the cavitation phenomenon). It allows the establishment of relations between the amount of extracted nutrient and the ultrasonic energy level. Thus, this work aims: to evaluate the effect of cavitation intensity on the extraction of P, Zn, Cu, Mn and Fe in soil samples from five Latosols under different uses around Uberlândia and Uberaba, Minas Gerais State; to obtain extracting curves as function of ultrasonic energy levels; and to obtain an index from extracting curves to expresses the nutrient retention by the soil solid phase. A soil-solution suspension (ratio 1:10) was sonicated using a probe ultrasound equipment under different combinations of power and time: i) 30 W for 35, 70, 140 and 280 s; ii) 50 W for 21, 42, 84 and 168 s; and iii) 70 W for 15, 30, 60 and 120 s. The extractant solutions used were Mehlich-1 (for all elements), Olsen and distilled water for P. After each sonication, P concentration was quantified by molybdenum blue colorimetric method and Zn, Cu, Mn and Fe by flame atomic absorption spectrophotometry. The cavitation intensity did not affect the P extraction, only the total energy applied. The P extraction was influenced by extractant solution, decreasing as follows: Mehlich-1>Olsen>water. In cultivated Latosols, the P extraction increased linearly with ultrasonic energy, and the slope of the 1:1 linear regression reflects the P retention in the soil. The Zn and Fe extractions were influenced only by total energy applied. Mn and Cu extractions were influenced by both cavitation intensity and total ultrasonic energy. Soils containing similar amounts of P, Cu, Zn, Mn, and Fe may have a different extraction rate. Likewise, soils containing different amounts of those elements may have the same extraction rate.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

This work presents discussions on the teaching of Chemical Bonds in high school and some implications of this approach in learning chemistry by students. In general, understanding how the chemicals combine to form substances and compounds, it is a key point for understanding the properties of substances and their structure. In this sense, the chemical bonds represent an extremely important issue, and their knowledge is essential for a better understanding of the changes occurring in our world. Despite these findings, it is observed that the way in which this concept is discussed in chemistry class has contributed, paradoxically, to the emergence of several alternative designs, making the understanding of the subject by students. It is believed that one of the explanations for these observations is the exclusive use of the "octet rule" as an explanatory model for the Chemical Bonds. The use of such a model over time eventually replace chemical principles that gave rise to it, transforming knowledge into a series of uninteresting rituals and even confusing for students. Based on these findings, it is deemed necessary a reformulation in the way to approach this content in the classroom, taking into account especially the fact that the explanations of the formation of substances should be based on the energy concept, which is fundamental to understanding how atoms combine. Thus, the main question of the survey and described here of the following question: Can the development of an explanatory model for the Chemical Bonds in high school based on the concept of energy and without the need to use the "octet rule"? Based on the concepts and methodologies of modeling activity, we sought the development of a teaching model was made through Teaching Units designed to give subsidies to high school teachers to address the chemical bonds through the concept of energy. Through this work it is intended to make the process of teaching and learning of Chemical Bonds content becomes more meaningful to students, developing models that contribute to the learning of this and hence other basic fundamentals of chemistry.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

The Virtual Reality techniques applied in Electricity Environments provide a new supervisory control paradigm. The fact of existing a virtual environment (VE), geometrically similar to a real substation, reduces the difference of mental models built by field operators compared with those built by system center operation improving the communication. Beside this, those systems can be used as visualization interfaces for electricity system simulators, training systems for professors and undergraduate students, field operators and maintenance professionals. However, the development process of these systems is quite complex, combining several activities such as implementation, 3D modeling, virtual sceneries construction, usability assessment and management project techniques. In this context, this work present a GUI strategy to build field arrangements based on scene graphs, to reduce time in Virtual Electricity Substations Arrangement development. Through this, mistakes during the VE building can be avoided making this process more reliable. As an concept proof, all toolkits developed in this work were applied in the virtualization of the substations from a Brazilian power concessionary named CEMIG.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

This work presents discussions on the teaching of Chemical Bonds in high school and some implications of this approach in learning chemistry by students. In general, understanding how the chemicals combine to form substances and compounds, it is a key point for understanding the properties of substances and their structure. In this sense, the chemical bonds represent an extremely important issue, and their knowledge is essential for a better understanding of the changes occurring in our world. Despite these findings, it is observed that the way in which this concept is discussed in chemistry class has contributed, paradoxically, to the emergence of several alternative designs, making the understanding of the subject by students. It is believed that one of the explanations for these observations is the exclusive use of the "octet rule" as an explanatory model for the Chemical Bonds. The use of such a model over time eventually replace chemical principles that gave rise to it, transforming knowledge into a series of uninteresting rituals and even confusing for students. Based on these findings, it is deemed necessary a reformulation in the way to approach this content in the classroom, taking into account especially the fact that the explanations of the formation of substances should be based on the energy concept, which is fundamental to understanding how atoms combine. Thus, the main question of the survey and described here of the following question: Can the development of an explanatory model for the Chemical Bonds in high school based on the concept of energy and without the need to use the "octet rule"? Based on the concepts and methodologies of modeling activity, we sought the development of a teaching model was made through Teaching Units designed to give subsidies to high school teachers to address the chemical bonds through the concept of energy. Through this work it is intended to make the process of teaching and learning of Chemical Bonds content becomes more meaningful to students, developing models that contribute to the learning of this and hence other basic fundamentals of chemistry.