2 resultados para 514 - Geometria
em Universidade Federal de Uberlândia
Resumo:
CHAPTER 1 - This study histologically evaluated two implant designs: a classic thread design versus another specifically designed for healing chamber formation placed with two drilling protocols. Forty dental implants (4.1 mm diameter) with two different macrogeometries were inserted in the tibia of 10 Beagle dogs, and maximum insertion torque was recorded. Drilling techniques were: until 3.75 mm (regular-group); and until 4.0 mm diameter (overdrillinggroup) for both implant designs. At 2 and 4 weeks, samples were retrieved and processed for histomorphometric analysis. For torque and BIC (bone-to-implant contact) and BAFO (bone area fraction occupied), a general-linear model was employed including instrumentation technique and time in vivo as independent. The insertion torque recorded for each implant design and drilling group significantly decreased as a function of increasing drilling diameter for both implant designs (p<0.001). No significant differences were detected between implant designs for each drilling technique (p>0.18). A significant increase in BIC was observed from 2 to 4 weeks for both implants placed with the overdrilling technique (p<0.03) only, but not for those placed in the 3.75 mm drilling sites (p>0.32). Despite the differences between implant designs and drilling technique an intramembranous-like healing mode with newly formed woven bone prevailed. CHAPTER 2 - The objective of this preliminary histologic study was to determine whether the alteration of drilling protocols (oversized, intermediate, undersized drilling) present different biologic responses at early healing periods of 2 weeks in vivo in a beagle dog model. Ten beagle dogs were acquired and subjected to surgeries in the tibia 2 weeks before euthanasia. During surgery, 3 implants, 4 mm in diameter by 10 mm in length, were placed in bone sites drilled to 3.5 mm, 3.75 mm, and 4.0 mm in final diameter. The insertion and removal torque was recorded for all samples. Statistical significance was set to 95% level of confidence and the number of dogs was considered as the statistical unit for all comparisons. For the torque and BIC and BAFO, a general linear model was employed including instrumentation technique and time in vivo as independent. Overall, the insertion torque increased as a function of drilling diameter from 4.0 mm, to 3.75 mm, to 3.5 mm, with a significant difference in torque levels between all groups (p<0.001). Statistical assessment of BIC and BAFO showed significantly higher values for the 3.75 mm (recommended) drilling group was observed relative to the other two groups (p<0.001). Different drilling dimensions resulted in variations in insertion torque values (primary stability) and different pattern of healing and interfacial remodeling was observed for the different groups. CHAPTER 3 - The present study evaluated the effect of different drilling dimensions (undersized, regular, and oversized) in the insertion and removal torques of dental implants in a beagle dog model. Six beagle dogs were acquired and subjected to bilateral surgeries in the radii 1 and 3 weeks before euthanasia. During surgery, 3 implants, 4 mm in diameter by 10 mm in length, were placed in bone sites drilled to 3.2 mm, 3.5 mm, and 3.8 mm in final diameter. The insertion and removal torque was recorded for all samples. Statistical analysis was performed by paired t tests for repeated measures and by t tests assuming unequal variances (all at the 95% level of significance). Overall, the insertion torque and removal torque levels obtained were inversely proportional to the drilling dimension, with a significant difference detected between the 3.2 mm and 3.5 mm relative to the 3.8 mm groups (P < 0.03). Although insertion torque–removal torque paired observations was statis- tically maintained for the 3.5 mm and 3.8 mm groups, a significant decrease in removal torque values relative to insertion torque levels was observed for the 3.2 mm group. A different pattern of healing and interfacial remodeling was observed for the different groups. Different drilling dimensions resulted in variations in insertion torque values (primary stability) and stability maintenance over the first weeks of bone healing.
Resumo:
This paper presents a survey conducted through collaborative work, which took place in a suburb school in the city of Uberlandia-MG. The research is characterized as case study and has a qualitative approach. Had the objective to look for different strategies of teaching and learning through the use of technology in pedagogical practice. Regarding the methodology in this research, we analyzed the work with the support of blogs, whose pages were used for student records and discussions directed to the geometry content. The students who were attending the fifth (5th) year of elementary school were invited to participate in this project. However, the research subjects were only those students who accepted the invitation to participate in the study through statement signed by parents. The project was developed with 30 students in the second half of 2014 and another 30 in the first half of 2015. The physical space at school, where most of the project activities were done was at the computer lab. In the process of compiling the data, at school, the following instruments were used: field notes produced by the entire project team, photographs and footage of the activities produced in the computer lab and in classroom (recorded by the research team) questionnaires, interviews, virtual space records: the blogs. The results of this research mainly focused on the analysis of the fifth year student‟s productions records in blogs. Regarding the conclusion, the research has shown that blogs, software and differentiated dynamic studies attracted the student‟s attention, leaving them mostly instigated by the unknown. Gradually, students built their own knowledge from their mistakes and successes. The entire work process enabled the computer lab to be an environment that is used not just to solving computerized and tedious drills. The blogs production work in groups, developed in students the reading and writing of both the mother language as symbols and mathematical nomenclature. The interaction between students became noticeable throughout the project, since it provided the student‟s personal growth, respect, tolerance and mutual cooperation. In this sense, we concluded that the project greatly contributed to the students' literacy process in the mother language, mathematics and computer literacy.