Quality Assurance in Extreme Programming

Our previous research about possible quality improvements in Extreme Programming (XP) led us to a conclusion that XP supports many good engineering practices but there is still place for refinements. Our proposal was to add dedicated Quality Assurance (QA) measures, which should be sufficiently effective and at the same time simpler enough in the context of XP. This paper intends to analyze the possibilities for an effective way for applying approved quality assurance practices to XP. The last should not affect negatively to the process and in the meantime must lead to better quality assurance. We aim to make changes to XP that even if would slow down a bit the development process, will make it more suitable for widest range of projects including large and very large projects as well as life critical and highly reliable systems.

The Notion of Model in Software Engineering

Милослав A. Средков - Понятията модел и моделиране се използват толкова интензивно в много дисциплини, че е трудно да им се придаде конретно значение. Дори в Софтуерните технологии, разбирането на тези понятия силно зависи от контекста. Ние смятаме, че това допринася за неконсистентността между подходите за моделиране там. В тази статия посочваме някои от произтичащите проблеми, както и важността да има подходяща дефиниция, съчетана с подходящи инструменти. Преглеждаме по-общите дефиниции на модел отвъд границите на Софтуерните технологии. Минаваме през моделирането на различни вторични продукти на процесите от Софтуерните технологии. Накрая представяме нашата визия относно използването на такава обща основа за наша полза.

Using Reengineering Techniques for Distance Study Course Improvement

The paper analyses the reengineering concept as it comes from software engineering and management fields. We combine two viewpoints and apply them to solve a problem of reengineering of a distance study system, in general, and the unit of learning, in particular. We propose a framework for reengineering of unit of learning, based on general model of software reengineering, and present a case study, in which we describe, how one topic of distance study course was reengineered, considering triple consistency principle and requirements for computer science. The proposed framework contributes to increasing quality, effectiveness and systematization of delivering distance studies.

Generalized Nets Model of an E-Learning System Software Architecture

The paper has been presented at the International Conference Pioneers of Bulgarian Mathematics, Dedicated to Nikola Obreshko ff and Lubomir Tschakaloff , Sofi a, July, 2006.

Traceability Management Architectures Supporting Total Traceability in the Context of Software Engineering

In the area of Software Engineering, traceability is defined as the capability to track requirements, their evolution and transformation in different components related to engineering process, as well as the management of the relationships between those components. However the current state of the art in traceability does not keep in mind many of the elements that compose a product, specially those created before requirements arise, nor the appropriated use of traceability to manage the knowledge underlying in order to be handled by other organizational or engineering processes. In this work we describe the architecture of a reference model that establishes a set of definitions, processes and models which allow a proper management of traceability and further uses of it, in a wider context than the one related to software development.

Automated Software Reengineering Model and Framework

Тодор П. Чолаков, Димитър Й. Биров - Тази статия представя цялостен модел за автоматизиран реинженеринг на наследени системи. Тя описва в детайли процесите на превод на софтуера и на рефакторинг и степента, до която могат да се автоматизират тези процеси. По отношение на превода на код се представя модел за автоматизирано превеждане на код, съдържащ указатели и работа с адресна аритметика. Също така се дефинира рамка за процеса на реинженеринг и се набелязват възможности за по-нататъшно развитие на концепции, инструменти и алгоритми.

Model Mining and Efficient Verification of Software Product Lines

Software product line modeling aims at capturing a set of software products in an economic yet meaningful way. We introduce a class of variability models that capture the sharing between the software artifacts forming the products of a software product line (SPL) in a hierarchical fashion, in terms of commonalities and orthogonalities. Such models are useful when analyzing and verifying all products of an SPL, since they provide a scheme for divide-and-conquer-style decomposition of the analysis or verification problem at hand. We define an abstract class of SPLs for which variability models can be constructed that are optimal w.r.t. the chosen representation of sharing. We show how the constructed models can be fed into a previously developed algorithmic technique for compositional verification of control-flow temporal safety properties, so that the properties to be verified are iteratively decomposed into simpler ones over orthogonal parts of the SPL, and are not re-verified over the shared parts. We provide tool support for our technique, and evaluate our tool on a small but realistic SPL of cash desks.

On the Models of Development and Distribution of Software

The notion model of development and distribution of software (MDDS) is introduced and its role for the efficiency of the software products is stressed. Two classical MDDS are presented and some attempts to adapt them to the contemporary trends in web-based software design are described. Advantages and shortcomings of the obtained models are outlined. In conclusion the desired features of a better MDDS for web-based solutions are given.

Software Testing and Documenting Automation

This article describes some approaches to problem of testing and documenting automation in information systems with graphical user interface. Combination of data mining methods and theory of finite state machines is used for testing automation. Automated creation of software documentation is based on using metadata in documented system. Metadata is built on graph model. Described approaches improve performance and quality of testing and documenting processes.

Software for Remote Parallel Simulation

This paper describes distributed/parallel simulation system Triad.Net and software, which allows geographical distributed users to participate collaboratively and remotely in simulation experiments and to observe simulation model behavior via Internet.

Educational Model of Computer as a Base for Informatics Learning

It is proposed to use one common model of computer for teaching different parts of the informatics course, connected with both hardware and software subjects. Reasoning of such slant is presented; the most suitable themes of the course, where it is practical, are enumerated. The own author's development (including software support) – the educational model of virtual computer "E97" and compiler from Pascal language for it – are described. It is accented, that the discussed ideas are helpful for any other similar model.

A Two Layered Model for Evolving Web Resources

In this paper the key features of a two-layered model for describing the semantic of dynamical web resources are introduced. In the current Semantic Web proposal [Berners-Lee et al., 2001] web resources are classified into static ontologies which describes the semantic network of their inter-relationships [Kalianpur, 2001][Handschuh & Staab, 2002] and complex constraints described by logical quantified formula [Boley et al., 2001][McGuinnes & van Harmelen, 2004][McGuinnes et al., 2004], the basic idea is that software agents can use techniques of automatic reasoning in order to relate resources and to support sophisticated web application. On the other hand, web resources are also characterized by their dynamical aspects, which are not adequately addressed by current web models. Resources on the web are dynamical since, in the minimal case, they can appear or disappear from the web and their content is upgraded. In addition, resources can traverse different states, which characterized the resource life-cycle, each resource state corresponding to different possible uses of the resource. Finally most resources are timed, i.e. they information they provide make sense only if contextualised with respect to time, and their validity and accuracy is greatly bounded by time. Temporal projection and deduction based on dynamical and time constraints of the resources can be made and exploited by software agents [Hendler, 2001] in order to make previsions about the availability and the state of a resource, for deciding when consulting the resource itself or in order to deliberately induce a resource state change for reaching some agent goal, such as in the automated planning framework [Fikes & Nilsson, 1971][Bacchus & Kabanza,1998].

A Log Tool for Software Systems Analyses

The article presents a new type of logs merging tool for multiple blade telecommunication systems based on the development of a new approach. The introduction of the new logs merging tool (the Log Merger) can help engineers to build a processes behavior timeline with a flexible system of information structuring used to assess the changes in the analyzed system. This logs merging system based on the experts experience and their analytical skills generates a knowledge base which could be advantageous in further decision-making expert system development. This paper proposes and discusses the design and implementation of the Log Merger, its architecture, multi-board analysis of capability and application areas. The paper also presents possible ways of further tool improvement e.g. - to extend its functionality and cover additional system platforms. The possibility to add an analysis module for further expert system development is also considered.

Performance Comparison of MATLAB and Neuro Solution Software on Estimation of Fuel Economy by Using Artificial Neural Network

In the world, scientific studies increase day by day and computer programs facilitate the human’s life. Scientists examine the human’s brain’s neural structure and they try to be model in the computer and they give the name of artificial neural network. For this reason, they think to develop more complex problem’s solution. The purpose of this study is to estimate fuel economy of an automobile engine by using artificial neural network (ANN) algorithm. Engine characteristics were simulated by using “Neuro Solution” software. The same data is used in MATLAB to compare the performance of MATLAB is such a problem and show its validity. The cylinder, displacement, power, weight, acceleration and vehicle production year are used as input data and miles per gallon (MPG) are used as target data. An Artificial Neural Network model was developed and 70% of data were used as training data, 15% of data were used as testing data and 15% of data is used as validation data. In creating our model, proper neuron number is carefully selected to increase the speed of the network. Since the problem has a nonlinear structure, multi layer are used in our model.

An Architectural Model of Rights Management Framework for Information Systems

The demands towards the contemporary information systems are constantly increasing. In a dynamic business environment an organization has to be prepared for sudden growth, shrinking or other type of reorganization. Such change would bring the need of adaptation of the information system, servicing the company. The association of access rights to parts of the system with users, groups of users, user roles etc. is of great importance to defining the different activities in the company and the restrictions of the access rights for each employee, according to his status. The mechanisms for access rights management in a system are taken in account during the system design. In most cases they are build in the system. This paper offers an approach in user rights framework development that is applicable in information systems. This work presents a reusable extendable mechanism that can be integrated in information systems.