The Mechanics of the drawing of polygonal sections from round at elevated temperature

Economic factors such as the rise in cost of raw materials, labour and power, are compelling manufacturers of cold-drawn polygonal sections, to seek new production routes which will enable the expansion in the varieties of metals used and the inclusion of difficult-to-draw materials. One such method generating considerable industrial interest is the drawing of polygonal sections from round at elevated temperature. The technique of drawing mild steel, medium carbon steel and boron steel wire into octagonal, hexagonal and square sections from round at up to 850 deg C and 50% reduction of area in one pass has been established. The main objective was to provide a basic understanding of the process, with particular emphasis being placed on modelling using both experimental and theoretical considerations. Elevated temperature stress-strain data was obtained using a modified torsion testing machine. Data were used in the upper bound solution derived and solved numerically to predict drawing stress strain, strain-rate, temperature and flow stress distribution in the deforming zone for a range of variables. The success of this warm working process will, of course, depend on the use of a satisfactory elevated temperature lubricant, an efficient cooling system, a suitable tool material having good wear and thermal shock resistance and an efficient die profile design which incorporates the principle of least work. The merits and demerits of die materials such as tungsten carbide, chromium carbide, Syalon and Stellite are discussed, principally from the standpoint of minimising drawing force and die wear. Generally, the experimental and theoretical results were in good agreement, the drawing stress could be predicted within close limits and the process proved to be technically feasible. Finite element analysis has been carried out on the various die geometries and die materials, to gain a greater understanding of the behaviour of these dies under the process of elevated temperature drawing, and to establish the temperature distribution and thermal distortion in the deforming zone, thus establishing the optimum die design and die material for the process. It is now possible to predict, for the materials already tested, (i) the optimum drawing temperature range, (ii) the maximum possible reduction of area per pass, (iii) the optimum drawing die profiles and die materials, (iv) the most efficient lubricant in terms of reducing the drawing force and die wear.

The sociolinguistic stratification of a connected speech process - The case of the T to R rule in the Black Country

This paper examines the connected speech process described by Wells (1982b) as the T to R rule in the West Midlands speech variety associated with the Black Country. The T to R rule is well known as a linguistic marker of local varieties of the middle and far north of England. Less well understood is its position in the phonological systems of Midlands varieties. Varieties of the Midlands of England are underresearched in comparison with varieties of the north, and what is known about the application of the T to R rule in this transitional dialect area is correspondingly nebulous. This paper focuses on the Black Country area, and examines the possible outputs in the contexts which give rise to /t/ becoming [?] in local varieties of the north. I examine the written and spoken evidence which suggests that the T to R rule does indeed operate in the Black Country variety. My analysis focuses on possible phonetic outcomes of the T to R rule across time. In my conclusion, I discuss briefly the possibility that, lying on a bundle of isoglosses separating north from south, the variety of the Black Country reflects this in that a T to [?] rule, rather than a T to R rule, is the dominant output of this connected speech process in the Black Country.

Development of a co-operative distributed process mining system for quality assurance

In this paper, a co-operative distributed process mining system (CDPMS) is developed to streamline the workflow along the supply chain in order to offer shorter delivery times, more flexibility and higher customer satisfaction with learning ability. The proposed system is equipped with the ‘distributed process mining’ feature which is used to discover the hidden relationships among each working decision in distributed manner. This method incorporates the concept of data mining and knowledge refinement into decision making process for ensuring ‘doing the right things’ within the workflow. An example of implementation is given, based on the case of slider manufacturer.

Strategic planning as communicative process

This paper looks at how a strategic plan is constructed through a communicative process. Drawing on Ricoeur’s concepts of decontextualization and recontextualization, we conceptualize strategic planning activities as being constituted through the iterative and recursive relationship of talk and text. Based on an in-depth case study, our findings show how multiple actors engage in a formal strategic planning process which is manifested in a written strategy document. This document is thus central in the iterative talk to text cycles. As individuals express their interpretations of the current strategic plan in talk, they are able to make amendments to the text that then shape future textual versions of the plan. This iterative cycle is repeated until a final plan is agreed. We develop our findings into a model of the communication process that explains how texts become more authoritative over time and, in doing so, how they inscribe power relationships and social order within organizations. These findings contribute to the literature on the purposes of largely institutionalized processes of strategic planning and to the literature on organization as a communications process.

Organising the innovation process:complementarities in innovation networking

This paper contributes to the developing literature on complementarities in organisational design. We test for the existence of complementarities in the use of external networking between phases of the innovation process in a sample of UK and German manufacturing plants. Our evidence suggests some differences between the UK and Germany in terms of the optimal combination of innovation activities in which to implement external networking. Broadly, there is more evidence of complementarities in the case of Germany, with the exception of the product engineering phase. By contrast, the UK exhibits generally strong evidence of substitutability in external networking in different phases, except between the identification of new products and product design and development phases.

Does the balanced scorecard make a difference to the strategy development process?

A great number of strategy tools are being taught in strategic management modules. These tools are available to managers for use in facilitating strategic decision-making and enhancing the strategy development process in their organisations. A number of studies have been published examining which are the most popular tools; however there is little empirical evidence on how their utilisation influences the strategy process. This paper is based on a large scale international survey on the strategy development process, and seeks to examine the impact of a particular strategy tool, the Balanced Scorecard, upon the strategy process. The Balanced Scorecard is one of the most popular strategy tools whose use has evolved since its introduction in the 1990’s. Recently, it has been suggested that as a strategy tool, Balanced Scorecard can influence all elements of the strategy process. The results of this study indicate that although there are significant differences in some elements of the strategy process between the organisations that have implemented the Balanced Scorecard and those that have not, the impact is not comprehensive.

Do strategic groups play a role in the SME financing process?

This exploratory paper, developing a conceptual model of owner-manager characteristics and access to finance, aims to investigate whether the concept of strategic groups plays a role in the process of small and medium-sized enterprises (SMEs) accessing finance. Strategic groups are groups of firms making similar patterns of investments in order to achieve their goals. This paper explores how strategic groups, which represent a classification of SMEs based upon their realised strategies, helps to provide an understanding of the success of SMEs in raising finance. The data, from a representative survey of 400 SMEs conducted by the Barclays Bank Telephone Research Unit, were subject to two-stage cluster analysis, thus codified into strategic groups using the natural rhythm of the data, rather than any subjective and value-laden categories being imposed by the authors. The findings show clear differentiation between strategic groups of SMEs, the characteristics of their owner-managers, and the financing strategies adopted. As such, the paper develops a novel typology of strategic groups of SMEs which, therefore, informs their financing strategies, as well as advising other stakeholders.

Deep hole drilling with twist drills: aspects of the CNC process and its real time monitoring and adaptive control

Deep hole drilling is one of the most complicated metal cutting processes and one of the most difficult to perform on CNC machine-tools or machining centres under conditions of limited manpower or unmanned operation. This research work investigates aspects of the deep hole drilling process with small diameter twist drills and presents a prototype system for real time process monitoring and adaptive control; two main research objectives are fulfilled in particular : First objective is the experimental investigation of the mechanics of the deep hole drilling process, using twist drills without internal coolant supply, in the range of diarneters Ø 2.4 to Ø4.5 mm and working length up to 40 diameters. The definition of the problems associated with the low strength of these tools and the study of mechanisms of catastrophic failure which manifest themselves well before and along with the classic mechanism of tool wear. The relationships between drilling thrust and torque with the depth of penetration and the various machining conditions are also investigated and the experimental evidence suggests that the process is inherently unstable at depths beyond a few diameters. Second objective is the design and implementation of a system for intelligent CNC deep hole drilling, the main task of which is to ensure integrity of the process and the safety of the tool and the workpiece. This task is achieved by means of interfacing the CNC system of the machine tool to an external computer which performs the following functions: On-line monitoring of the drilling thrust and torque, adaptive control of feed rate, spindle speed and tool penetration (Z-axis), indirect monitoring of tool wear by pattern recognition of variations of the drilling thrust with cumulative cutting time and drilled depth, operation as a data base for tools and workpieces and finally issuing of alarms and diagnostic messages.

Human performance modelling as an aid in the process of manufacturing system design

Manufacturing system design is an ongoing activity within industry. Modelling tools based on Discrete Event Simulation are often used by practitioners during this design cycle. However, such tools do not adequately model the behaviour of 'direct' workers in manufacturing environments. There is an important need to expand the capability of modelling to include the relationships between human centred factors (demography, attitudes, beliefs, etc), their working environment (physical and organizational), and their subsequent performance in terms of productive routines. Therefore, this paper describes research that has formed a pilot modelling methodology that is an important first step in providing such a capability.

Illusions of team working in health care

Purpose: The ubiquity and value of teams in healthcare are well acknowledged. However, in practice, healthcare teams vary dramatically in their structures and effectiveness in ways that can damage team processes and patient outcomes. The aim of this paper is to highlight these characteristics and to extrapolate several important aspects of teamwork that have a powerful impact on team effectiveness across healthcare contexts. Design/methodology/approach: The paper draws upon the literature from health services management and organisational behaviour to provide an overview of the current science of healthcare teams. Findings: Underpinned by the input-process-output framework of team effectiveness, team composition, team task, and organisational support are viewed as critical inputs that influence key team processes including team objectives, leadership and reflexivity, which in turn impact staff and patient outcomes. Team training interventions and care pathways can facilitate more effective interdisciplinary teamwork. Originality/value: The paper argues that the prevalence of the term "team" in healthcare makes the synthesis and advancement of the scientific understanding of healthcare teams a challenge. Future research therefore needs to better define the fundamental characteristics of teams in studies in order to ensure that findings based on real teams, rather than pseudo-like groups, are accumulated. © Emerald Group Publishing Limited.

Team working in intensive care:current evidence and future endeavors

Purpose of review: It has recently been argued that the future of intensive care medicine will rely on high quality management and teamwork. Therefore, this review takes an organizational psychology perspective to examine the most recent research on the relationship between teamwork, care processes, and patient outcomes in intensive care. Recent findings: Interdisciplinary communication within a team is crucial for the development of negotiated shared treatment goals and short-team patient outcomes. Interventions for maximizing team communication have received substantial interest in recent literature. Intensive care coordination is not a linear process, and intensive care teams often fail to discuss how to implement goals, trigger and align activities, or reflect on their performance. Despite a move toward interdisciplinary team working, clinical decision-making is still problematic and continues to be perceived as a top-down and authoritative process. The topic of team leadership in intensive care is underexplored and requires further research. Summary: Based on findings from the most recent research evidence in medicine and management, four principles are identified for improving the effectiveness of team working in intensive care: engender professional efficacy, create stable teams and leaders, develop trust and participative safety, and enable frequent team reflexivity.

From words to action:visibility of management in supporting interdisciplinary team working in an acute rehabilitative geriatric hospital

Purpose: The following case study aims to explore management's, health professionals' and patients' experiences on the extent to which there is visibility of management support in achieving effective interdisciplinary team working, which is explicitly declared in the mission statement of a 60-bed acute rehabilitative geriatric hospital in Malta. Design/methodology/approach: A total of 21 semi-structured interviews were conducted with the above-mentioned key stakeholders. Findings: Three main distinct yet interdependent themes emerged as a result of thematic analysis: "managing a team-friendly hospital", "interdisciplinary team components", and "interdisciplinary team processes". The findings show that visibility of management support and its alignment with the process and content levels of interdisciplinary teamwork are key to integrated care for acute rehabilitative geriatric patients. Research limitations/implications: The emerging phenomena may not be reproducible in a different context; although many of the emerging themes could be comfortably matched with the existing literature. Practical implications: The implications are geared towards raising the consciousness and conscientiousness of good practice in interdisciplinary teamwork in hospitals, as well as in emphasizing organizational and management support as crucial factors for team-based organizations. Social implications: Interdisciplinary teamwork in acute rehabilitative geriatrics provides optimal quality and integrated health care delivery with the aim that the older persons are successfully discharged back to the community. Originality/value: The authors draw on solid theoretical frameworks - the complexity theory, team effectiveness model and the social identity theory - to support their major finding, namely the alignment of organizational and management support with intra-team factors at the process and content level. © Emerald Group Publishing Limited.

Working with the public sector:SME medical device innovation and pre-procurement

Healthcare providers are under ever increasing pressure to deliver more technologically advanced care without increasing costs. Innovation is essential (Darzi, 2008), and for this healthcare providers rely on innovation within commercial companies. SMEs have an important part to play in this sector (NHS Supply Chain Parliamentary Brief, 2013). Collaboration between SME suppliers and the NHS for innovation forms the focus of this paper. We examine the academic literature on interorganizational innovation including academic insights from the areas of forward commitment procurement (Environmental Innovation Advisory Group, 2003-2008), pre-commercial procurement (Bos & Corvers, 2007), innovation and SMEs. We then explore practice, first from a policy and business sector perspective. Second, we present evidence from fifteen cases of interorganizational innovation projects involving SMEs and UK healthcare providers. Our findings show much effort is being put into creating opportunities for more interorganizational innovation of medical devices. Working across organizational boundaries presents added complexity to the innovation environment and process, and the challenge of developing high-quality cross-boundary group interaction.