Double machine operation and psychological strain

This study examines the effects of double machine operation on psychological strain. CNC drilling machine operators' reactions to their job were monitored as they rotated between three different work conditions; single machine operation, double machine operation, and double machine operation with additionally high responsibility for products. Results show no effect of double machine operation on strain where responsibility was low. Double machine operation under the condition of high responsibility, however, was found to increase strain.

Individual spirit at work and its relationship with employee work attitudes and organisational outcomes:An empirical examination in corporate Thailand

The purpose of this thesis is to conduct empirical research in corporate Thailand in order to (1) validate the Spirit at Work Scale (2) investigate the relationships between individual spirit at work and three employee work attitudinal variables (job satisfaction, organisational identification and psychological well-being) and three organisational outcomes (in-role performance, organisational citizenship behaviours (OCB), and turnover intentions) (3) further examine causal relations among these organisational behaviour variables with a longitudinal design (4) examine three employee work attitudes as mediator variables between individual spirit at work and three organisational outcomes and (5) explore the potential antecedents of organisational conditions that foster employee experienced individual spirit at work. The two pilot studies with 155 UK and 175, 715 Thai samples were conducted for validation testing of the main measure used in this study: Spirit at Work Scale (Kinjerski & Skrypnek, 2006a). The results of the two studies including discriminant validity analyses strongly provided supportive evidence that Spirit at Work Scale (SAWS) is a sound psychometric measure and also a distinct construct from the three work attitude constructs. The final model of SAWS contains a total of twelve items; a three factor structure (meaning in work, sense of community, and spiritual connection) in which the sub-factors loaded on higher order factors and also had very acceptable reliability. In line with these results it was decided to use the second-order of SAWS model for Thai samples in the main study and subsequent analysis. The 715 completed questionnaires were received from the first wave of data collection during July - August 2008 and the second wave was conducted again within the same organisations and 501 completed questionnaires were received during March - April 2009. Data were obtained through 49 organisations which were from three types of organisations within Thailand: public organisations, for-profit organisations, and notfor-profit organisations. Confirmatory factor analysis of all measures used in the study and hypothesised model were tested with structural equation modelling techniques. The results were greatly supportive for the direct structural model and partially supportive for the fully mediated model. Moreover, there were different findings across self report and supervisor rating on performance and OCB models. Additionally, the antecedent conditions that fostered employees experienced individual spirit at work and the implications of these findings for research and practice are discussed.

Translation and the EU - conditions and consequences

Translation plays an important role in the EU institutions. The description and explanation of the conditions of translation work and of the products of this work pose challenges to Translation Studies. For example, it needs to be tested whether traditional concepts do apply to the translation activity and its products, or whether modified or new concepts need to be introduced. Some of these concepts are reconsidered in view of the new contexts. Cross-references are made to the individual contributions in this issue which provide specific information.

The lateral and ventromedial prefrontal cortex work as a dynamic integrated system:evidence from FMRI connectivity analysis

Recent functional magnetic resonance imaging (fMRI) investigations of the interaction between cognition and reward processing have found that the lateral prefrontal cortex (PFC) areas are preferentially activated to both increasing cognitive demand and reward level. Conversely, ventromedial PFC (VMPFC) areas show decreased activation to the same conditions, indicating a possible reciprocal relationship between cognitive and emotional processing regions. We report an fMRI study of a rewarded working memory task, in which we further explore how the relationship between reward and cognitive processing is mediated. We not only assess the integrity of reciprocal neural connections between the lateral PFC and VMPFC brain regions in different experimental contexts but also test whether additional cortical and subcortical regions influence this relationship. Psychophysiological interaction analyses were used as a measure of functional connectivity in order to characterize the influence of both cognitive and motivational variables on connectivity between the lateral PFC and the VMPFC. Psychophysiological interactions revealed negative functional connectivity between the lateral PFC and the VMPFC in the context of high memory load, and high memory load in tandem with a highly motivating context, but not in the context of reward alone. Physiophysiological interactions further indicated that the dorsal anterior cingulate and the caudate nucleus modulate this pathway. These findings provide evidence for a dynamic interplay between lateral PFC and VMPFC regions and are consistent with an emotional gating role for the VMPFC during cognitively demanding tasks. Our findings also support neuropsychological theories of mood disorders, which have long emphasized a dysfunctional relationship between emotion/motivational and cognitive processes in depression.

The use of driven equilibrium conditions in the measurement of NMR relaxation times

The further development of the use of NMR relaxation times in chemical, biological and medical research has perhaps been curtailed by the length of time these measurements often take. The DESPOT (Driven Equilibrium Single Pulse Observation of T1) method has been developed, which reduces the time required to make a T1 measurement by a factor of up to 100. The technique has been studied extensively herein and the thesis contains recommendations for its successful experimental application. Modified DESPOT type equations for use when T2 relaxation is incomplete or where off-resonance effects are thought to be significant are also presented. A recently reported application of the DESPOT technique to MR imaging gave good initial results but suffered from the fact that the images were derived from spin systems that were not driven to equilibrium. An approach which allows equilibrium to be obtained with only one non-acquisition sequence is presented herein and should prove invaluable in variable contrast imaging. A DESPOT type approach has also been successfully applied to the measurement of T1. T_1's can be measured, using this approach significantly faster than by the use of the classical method. The new method also provides a value for T1 simultaneously and therefore the technique should prove valuable in intermediate energy barrier chemical exchange studies. The method also gives rise to the possibility of obtaining simultaneous T1 and T1 MR images. The DESPOT technique depends on rapid multipulsing at nutation angles, normally less than 90^o. Work in this area has highlighted the possible time saving for spectral acquisition over the classical technique (90^o-5T_1)_n. A new method based on these principles has been developed which permits the rapid multipulsing of samples to give T_1 and M_0 ratio information. The time needed, however, is only slightly longer than would be required to determine the M_0 ratio alone using the classical technique. In ^1H decoupled ^13C spectroscopy the method also gives nOe ratio information for the individual absorptions in the spectrum.

The work situation and class position of Brazilian engineers

This thesis analyses the work situation and class position of Brazilian engineers through a Marxist perspective. The research is based on two case studies, one focused on a large German steel company based in Brazil and the other on a large Brazilian energy corporation. The fieldwork involved 114 interviews, with engineers from different hierarchical positions in these two companies. Data was also gathered through interviews with representatives from the companies, the Council of Engineering, the Engineering Education System and the Engineers Trade Unions. The findings show that the engineering profession in Brazil has shifted from its initial condition as a liberal profession to an organizational profession, with the country's industrial deployment. Both companies consider all salaried workers as employees, including managers. Hence they are subject to the company's general personnel policies. The multinational company controls labour more rigidly than the national company, as well as reserving its top positions for its home country's executives. Although no deskilling process was found, engineers of both companies performed simple work, which required less engineering knowledge than they had learned from school. Engineers have little autonomy, authority and participation in decision making and are subject to direct supervision, performance evaluation, time control, overtime work, productivity and to poor working conditions in the multinational company. The majority of the engineers supervised other workers without being in a managerial position. They found that to move into management, was a good way to improve their autonomy, authority, prestige, salary, status, power and professional pride. Despite ideological divisions between capital and labour, most of the engineers were unionised and saw unions as the right way to deal with the employer.

Enhancing creativity in a general work environment : the role of problem-solving demand

Prior research suggests management can employ cognitively demanding job attributes to promote employee creativity. However, it is not clear what specific type of cognitive demand is particularly important for creativity, what processes underpin the relationship between demanding job conditions and creativity and what factors lead to employee perceptions of demanding job attributes. This research sets out to address the aforementioned issues by examining: (i) problem-solving demand (PDS), a specific type of cognitive demand, and the processes that link PSD to creativity, and (ii) antecedents to PSD. Based on social cognitive theory, PSD was hypothesized to be positively related to creativity through the motivational mechanism of creative self-efficacy. However, the relationship between PSD and creative self-efficacy was hypothesized to be contingent on levels of intrinsic motivation. Social information processing perspective and the job crafting model were used to identify antecedents of PSD. Consequently, two social-contextual factors (supervisor developmental feedback and job autonomy) and one individual factor (proactive personality) were hypothesized to be precursors to PSD perceptions. The theorized model was tested with data obtained from a sample of 270 employees and their supervisors from 3 organisations in the People’s Republic of China. Regression results revealed that PSD was positively related to creativity but this relationship was partially mediated by creative self-efficacy. Additionally, intrinsic motivation moderated the relationship between PSD and creative self-efficacy such that the relationship was stronger for individuals high rather than low in intrinsic motivation. The findings represent a productive first step in identifying a specific cognitive demand that is conducive to employee creativity. In addition, the findings contribute to the literature by identifying a psychological mechanism that may link cognitively demanding job attributes and creativity.

Mechanical properties of sheet metal under forming conditions

In the bulge test, a sheet metal specimen is clamped over a circular hole in a die and formed into a bulge by the hydraulic pressure on one side of the specirnen. As the unsupported part of the specimen is deformed in this way, its area is increased, in other words, the material is generally stretched and its thickness generally decreased. The stresses causing this stretching action are the membrane stresses in the shell generated by the hydraulic pressure, in the same way as the rubber in a toy balloon is stretched by the membrane stresses caused by the air inside it. The bulge test is a widely used sheet metal test, to determine the "formability" of sheet materials. Research on this forming process (2)-(15)* has hitherto been almost exclusively confined to predicting the behaviour of the bulged specimen through the constitutive equations (stresses and strains in relation to displacements and shapes) and empirical work hardening characteristics of the material as determined in the tension test. In the present study the approach is reversed; the stresses and strains in the specimen are measured and determined from the geometry of the deformed shell. Thus, the bulge test can be used for determining the stress-strain relationship in the material under actual conditions in sheet metal forming processes. When sheet materials are formed by fluid pressure, the work-piece assumes an approximately spherical shape, The exact nature and magnitude of the deviation from the perfect sphere can be defined and measured by an index called prolateness. The distribution of prolateness throughout the workpiece at any particular stage of the forming process is of fundamental significance, because it determines the variation of the stress ratio on which the mode of deformation depends. It is found. that, before the process becomes unstable in sheet metal, the workpiece is exactly spherical only at the pole and at an annular ring. Between the pole and this annular ring the workpiece is more pointed than a sphere, and outside this ring, it is flatter than a sphere. In the forming of sheet materials, the stresses and hence the incremental strains, are closely related to the curvatures of the workpiece. This relationship between geometry and state of stress can be formulated quantitatively through prolateness. The determination of the magnitudes of prolateness, however, requires special techniques. The success of the experimental work is due to the technique of measuring the profile inclination of the meridional section very accurately. A travelling microscope, workshop protractor and surface plate are used for measurements of circumferential and meridional tangential strains. The curvatures can be calculated from geometry. If, however, the shape of the workpiece is expressed in terms of the current radial (r) and axial ( L) coordinates, it is very difficult to calculate the curvatures within an adequate degree of accuracy, owing to the double differentiation involved. In this project, a first differentiation is, in effect, by-passed by measuring the profile inclination directly and the second differentiation is performed in a round-about way, as explained in later chapters. The variations of the stresses in the workpiece thus observed have not, to the knowledge of the author, been reported experimentally. The static strength of shells to withstand fluid pressure and their buckling strength under concentrated loads, both depend on the distribution of the thickness. Thickness distribution can be controlled to a limited extent by changing the work hardening characteristics of the work material and by imposing constraints. A technique is provided in this thesis for determining accurately the stress distribution, on which the strains associated with thinning depend. Whether a problem of controlled thickness distribution is tackled by theory, or by experiments, or by both combined, the analysis in this thesis supplies the theoretical framework and some useful experimental techniques for the research applied to particular problems. The improvement of formability by allowing draw-in can also be analysed with the same theoretical and experimental techniques. Results on stress-strain relationships are usually represented by single stress-strain curves plotted either between one stress and one strain (as in the tension or compression tests) or between the effective stress and effective strain, as in tests on tubular specimens under combined tension, torsion and internal pressure. In this study, the triaxial stresses and strains are plotted simultaneously in triangular coordinates. Thus, both stress and strain are represented by vectors and the relationship between them by the relationship between two vector functions. From the results so obtained, conclusions are drawn on both the behaviour and the properties of the material in the bulge test. The stress ratios are generally equal to the strain-rate ratios (stress vectors collinear with incremental strain vectors) and the work-hardening characteristics, which apply only to the particular strain paths are deduced. Plastic instability of the material is generally considered to have been reached when the oil pressure has attained its maximum value so that further deformation occurs under a constant or lower pressure. It is found that the instability regime of deformation has already occurred long before the maximum pressure is attained. Thus, a new concept of instability is proposed, and for this criterion, instability can occur for any type of pressure growth curves.

An experimental analysis of operating conditions in cold roll-forming

A detailed literature survey confirmed cold roll-forming to be a complex and little understood process. In spite of its growing value, the process remains largely un-automated with few principles used in set-up of the rolling mill. This work concentrates on experimental investigations of operating conditions in order to gain a scientific understanding of the process. The operating conditions are; inter-pass distance, roll load, roll speed, horizontal roll alignment. Fifty tests have been carried out under varied operating conditions, measuring section quality and longitudinal straining to give a picture of bending. A channel section was chosen for its simplicity and compatibility with previous work. Quality measurements were measured in terms of vertical bow, twist and cross-sectional geometric accuracy, and a complete method of classifying quality has been devised. The longitudinal strain profile was recorded, by the use of strain gauges attached to the strip surface at five locations. Parameter control is shown to be important in allowing consistency in section quality. At present rolling mills are constructed with large tolerances on operating conditions. By reduction of the variability in parameters, section consistency is maintained and mill down-time is reduced. Roll load, alignment and differential roll speed are all shown to affect quality, and can be used to control quality. Set-up time is reduced by improving the design of the mill so that parameter values can be measured and set, without the need for judgment by eye. Values of parameters can be guided by models of the process, although elements of experience are still unavoidable. Despite increased parameter control, section quality is variable, if only due to variability in strip material properties. Parameters must therefore be changed during rolling. Ideally this can take place by closed-loop feedback control. Future work lies in overcoming the problems connected with this control.

The growth and awareness of health and safety at work, 1780-1900

This thesis examines the growth and awareness of health and safety at work between 1780 and 1900. In this period the hazards at work were increased by the intensification of production brought about by the Industrial Revolution, and new risks to health arose from the wider range of toxic substances in use by manufacturing industry. There is discussion in the thesis of the extent to which the problems were identified in an age of short life expectancy and limited medical knowledge. The sources studied have been largely medical, governmental, trade and press reports. The emphasis is on the first effects seen and recommendations made, and where possible, the extent of the problem and the effectiveness of any preventative measures adopted and examined. There is discussion of the growing involvement of the Government in industrial health and safety. The subject is viewed in the light of modern thinking on industrial health but uses a classification appropriate to historical resources. Psychological and minor afflictions, neglected in the 19th century, are not considered. The available literature is reviewed in each section. Three detailed case studies conclude the thesis, two on the notoriously dangerous occupations of metal grinding and pottery, and one on occupational eye injuries. Each study is based on a different type of source material. The thesis overall shows that there was extensive concern for health and safety at work, but no systematic approach and only ad hoc implementation of preventative measures; and that the rate at which conditions improved varied between different industries and different categories of workers . However, some modern principles of health and safety at work can be seen emerging, and the period laid the necessary medical, technical and legal foundations for developments in the present century.

Work-related stressors and psychological strain in the sales force:the role of intrinsic and extrinsic motivation

The contemporary workplace appears rife with psychological strain, which can have considerable deleterious outcomes to the firm and the individual. However, research on strain in the sales force is underdeveloped. This paper reports the results of a study of the antecedents and consequences of psychological strain in the sales force, with particular attention to the roles of role ambiguity, emotional exhaustion, and intrinsic and extrinsic motivation. Emotional exhaustion is found to increase strain. Intrinsic motivation reduces strain under conditions of relatively high role ambiguity, but leads to more strain under conditions of low role ambiguity. Strain is found to have a J-shaped relationship with turnover intentions, and is linearly related to lower job satisfaction and lower job performance.

Getting diversity at work to work:what we know and what we still don’t know

Diversity has the potential to significantly benefit organizations by leading to positive work outcomes when diversity ‘works’. Unfortunately, not only is our knowledge limited as to the necessary conditions and the mechanisms by which diversity affects individual, work performance and organizational outcomes, but we still know very little about which diversity management practices are most effective in promoting positive outcomes. We analyse the literature on diversity and its management, and describe how the seven papers included in this section advance our understanding of what organizations can do to get diversity at work to work. Our discussion points to the need for more research on how diversity at multiple levels affects work and organizational outcomes; the development of integrative theory which takes into account that diversity might not only engender separation and variety but also disparity; as well as to the need for more empirical attention to the climates or cultures that facilitate the positive effects of diversity on work and organizational outcomes. We suggest that future research should also identify those people management practices that are most powerful in the creation of a positive diversity climate, and the factors that moderate and underlie its effects on work and organizational outcomes. We conclude with proposals about how this might be achieved. © 2013 The British Psychological Society.

Pryolytic and kinetic study of Chlorella Vulgaris under isothermal and non-isothermal conditions

Algae are a new potential biomass for energy production but there is limited information on their pyrolysis and kinetics. The main aim of this thesis is to investigate the pyrolytic behaviour and kinetics of Chlorella vulgaris, a green microalga. Under pyrolysis conditions, these microalgae show their comparable capabilities to terrestrial biomass for energy and chemicals production. Also, the evidence from a preliminary pyrolysis by the intermediate pilot-scale reactor supports the applicability of these microalgae in the existing pyrolysis reactor. Thermal decomposition of Chlorella vulgaris occurs in a wide range of temperature (200-550°C) with multi-step reactions. To evaluate the kinetic parameters of their pyrolysis process, two approaches which are isothermal and non-isothermal experiments are applied in this work. New developed Pyrolysis-Mass Spectrometry (Py-MS) technique has the potential for isothermal measurements with a short run time and small sample size requirement. The equipment and procedure are assessed by the kinetic evaluation of thermal decomposition of polyethylene and lignocellulosic derived materials (cellulose, hemicellulose, and lignin). In the case of non-isothermal experiment, Thermogravimetry- Mass Spectrometry (TG-MS) technique is used in this work. Evolved gas analysis provides the information on the evolution of volatiles and these data lead to a multi-component model. Triplet kinetic values (apparent activation energy, pre-exponential factor, and apparent reaction order) from isothermal experiment are 57 (kJ/mol), 5.32 (logA, min-1), 1.21-1.45; 9 (kJ/mol), 1.75 (logA, min-1), 1.45 and 40 (kJ/mol), 3.88 (logA, min-1), 1.45- 1.15 for low, middle and high temperature region, respectively. The kinetic parameters from non-isothermal experiment are varied depending on the different fractions in algal biomass when the range of apparent activation energies are 73-207 (kJ/mol); pre-exponential factor are 5-16 (logA, min-1); and apparent reaction orders are 1.32–2.00. The kinetic procedures reported in this thesis are able to be applied to other kinds of biomass and algae for future works.

Individual spirit at work and its outcomes:an empirical examination in corporate Thailand

The purpose of the present study was to conduct empirical research in corporate Thailand in order to (1) investigate the relationships between individual spirit at work and three employee work attitudinal variables (organisational identification, job satisfaction and psychological well-being) and three organisational outcomes (in-role performance, organisational citizenship behaviours (OCB), and turnover intentions) (2) further examine causal relations among these organisational behaviour variables with a longitudinal design (3) examine three employee work attitudes as mediator variables between individual spirit at work and three organisational outcomes and (4) explore the potential antecedents of organisational conditions that foster employee experienced individual spirit at work. The 715 completed questionnaires were received from the first wave of data collection during July 2008 and the second wave was conducted again within the same organisations and 501 completed questionnaires were received during April 2009. Data were obtained through 52 organisations which were from three types of organisations within Thailand: public organisations (N=237,185), for-profit organisations (N=244,155), and not-for-profit organisations (N=234,161). Confirmatory factor analysis of all measures used in the study and hypothesized model were tested with structural equation modeling techniques. Results were strongly supportive. In addition, although the model was invariant across rater of performance and OCB, there were differences across self report and supervisor rating. Additionally, the antecedents of organisational conditions that fostered employees experienced individual spirit at work and the implications of these findings for practice and research are discussed.

When do incentives work in channels of distribution?

The incentive dilemma refers to a situation in which incentives are offered but do not work as intended. The authors suggest that, in an interorganizational context, whether a principal-provided incentive works is a function of how it is evaluated by an agent: for its contribution to the agent's bottom line (instrumental evaluation) and for the extent it is strategically aligned with the agent's direction (congruence evaluation). To further understand when incentives work, the influence of two key contextual variables-industry volatility and dependence-are examined. A field study featuring 57 semi-structured depth interviews and 386 responses from twin surveys in the information technology and brewing industries provide data for hypothesis testing. When and whether incentives work is demonstrated by certain conditions under which the agent's evaluation of an incentive has positive or negative effects on its compliance and active representation. Further, some outcomes are reversed in the high volatility condition. © 2013 Academy of Marketing Science.