Deep hole drilling with twist drills: aspects of the CNC process and its real time monitoring and adaptive control

Deep hole drilling is one of the most complicated metal cutting processes and one of the most difficult to perform on CNC machine-tools or machining centres under conditions of limited manpower or unmanned operation. This research work investigates aspects of the deep hole drilling process with small diameter twist drills and presents a prototype system for real time process monitoring and adaptive control; two main research objectives are fulfilled in particular : First objective is the experimental investigation of the mechanics of the deep hole drilling process, using twist drills without internal coolant supply, in the range of diarneters Ø 2.4 to Ø4.5 mm and working length up to 40 diameters. The definition of the problems associated with the low strength of these tools and the study of mechanisms of catastrophic failure which manifest themselves well before and along with the classic mechanism of tool wear. The relationships between drilling thrust and torque with the depth of penetration and the various machining conditions are also investigated and the experimental evidence suggests that the process is inherently unstable at depths beyond a few diameters. Second objective is the design and implementation of a system for intelligent CNC deep hole drilling, the main task of which is to ensure integrity of the process and the safety of the tool and the workpiece. This task is achieved by means of interfacing the CNC system of the machine tool to an external computer which performs the following functions: On-line monitoring of the drilling thrust and torque, adaptive control of feed rate, spindle speed and tool penetration (Z-axis), indirect monitoring of tool wear by pattern recognition of variations of the drilling thrust with cumulative cutting time and drilled depth, operation as a data base for tools and workpieces and finally issuing of alarms and diagnostic messages.

Ideological aspects of the translation of business annual reports in Oman (English-Arabic)

The socioeconomic context in the renaissance era in Oman has resulted in the development of new forms of discursive prastises and thus, in the introduction of new genres. One of these new genres is the business annual report, which in Oman exists in English and Arabic. This thesis examines the role of translation in the production of annual reports. This research makes a contribution to the field of Translation Studies by examining institutional translation in order to gain insights into translation agents, processes, practises and underlying policies with reference to national business institutions in their sociopolitical and historical and institutional contexts .Business reports are still largely under-researched as a genre in Translation Studies. The thesis starts with an overview of relevant aspects of Translation Studies to arrive at a theoretical framework which informs the analysis. The empirical analysis is based on sixty seven reports produced by different Oman-based companies which vary in size and organisational patterns. Annual reports are characterised as a genre in terms of function and structure at the macro-level as well as the micro-level. They have an informative and a persuasive function, as they are produced by different companies in their attempt to promote and fulfil their respective business interests and objectives.The thesis presents the sociocultural and political contexts of the production of the English and Arabic versions of the annual reports, focusing on the underlying functions and principles of institutions and agents. The next chapter illustrates the textual profiles of the English and the Arabic versions, identifying typical translation strategies. The discussion here operates within the framework of product-oriented Descriptive Translation Studies (Lambert and van Gorp 1985). It is argued that the two language versions reflect aspects of ideology, political affiliation and power relations at both the macro and micro- structural levels. These ideological aspects can be seen in particular in the addition, omission and change of specific expressions which refer to religious or interpersonal aspects. These strategies signal the aim to appeal to wider Arab readers and to fulfil the agendas of different agents (government, companies, chairpersons, directors, etc.). The description of the texts is followed by an account of these aspects in terms of sociopolitical and institutional conditions in the production of the translations. For this explanation, reference is made to sociological approaches to translation, mainly building on the work of Bourdieu (1991). This thesis emphasises that the translation of annual reports is a collective effort which takes place in a particular institutional context. Consequently, the translation strategies are regulated by the objectives of the institution within which translators and other agents operate. The translations are prepared in order to meet the expectations and needs of the intended Arabic language addressees; in addition, the generic features of the reports reveal a progression of transmission and development over the course of time in the spheres of business and economy in Oman. This thesis demonstrates that business companies too can be seen as institutions which contribute significantly to disseminating business terms and concepts and promoting investment opportunities domestically and internationally through translation work.

The social construction of sleep and work in the British print news media

This article presents a sociological study of sleep issues in the British print news media, with particular focus on the relationship between sleep, work and the changing demands of ‘flexible capitalism’. Drawing on over 1000 newspaper articles from 1984 to 2005, we explore how and why sleep is framed or constructed in terms of continuity and change (in British working life and work cultures) and, equally, viewed as a neglected component of our social lives which is too easily sacrificed to the demands of the 24/7 society, long hours culture and the struggle to create a harmonious work-life balance. This is particularly the case for certain British work cultures in which sleep has conflicting and contrasting associations. Finally, we reflect on the broader class-based discourses and debates that arise from certain workers having their sleep patterns increasingly scrutinized and regulated, and the role of the media in any ensuing sleep/work ‘crisis’.

Dispersion aspects of periodically amplified soliton transmission systems

This thesis presents improvements to optical transmission systems through the use of optical solitons as a digital transmission format, both theoretically and experimentally. An introduction to the main concepts and impairments of optical fibre on pulse transmission is included before introducing the concept of solitons in optically amplified communications and the problems of soliton system design. The theoretical work studies two fibre dispersion profiling schemes and a soliton launch improvement. The first provides superior pulse transmission by optimally tailoring the fibre dispersion to better follow the power, and hence nonlinearity, decay and thus allow soliton transmission for longer amplifier spacings and shorter pulse widths than normally possible. The second profiling scheme examines the use of dispersion compensating fibre in the context of soliton transmission over existing, standard fibre systems. The limits for solitons in uncompensated standard fibre are assessed, before the potential benefits of dispersion compensating fibre included as part of each amplifier are shown. The third theoretical investigation provides a simple improvement to the propagation of solitons in a highly perturbed system. By introducing a section of fibre of the correct length prior to the first system amplifier span, the soliton shape can be better coupled into the system thus providing an improved "average soliton" propagation model. The experimental work covers two areas. An important issue for soliton systems is pulse sources. Three potential lasers are studied, two ring laser configurations and one semiconductor device with external pulse shaping. The second area studies soliton transmission using a recalculating loop, reviewing the advantages and draw-backs of such an experiment in system testing and design. One particular example of employing the recirculating loop is also examined, using a novel method of pulse shape stabilisation over long distances with low jitter. The future for nonlinear optical communications is considered with the thesis conclusions.

Aspects of the learner's dictionary with special reference to advanced Pakistani learners of English

The present work is an empirical investigation into the lq`reference skills' of Pakistani learners and their language needs on semantic, phonetic, lexical and pragmatic levels in the dictionary. The introductory chapter discusses the relatively problematic nature of lexis in comparison with the other aspects in EFL learning and spells out the aim of this study. Chapter two provides an analytical survey of the various types of research undertaken in different contexts of the dictionary and explains the eclectic approach adopted in the present work. Chapter three studies the `reference skills' of this category of learners in the background of highly sophisticated information structure of learners' dictionaries under evaluation and suggests some measures for improvement in this context. Chapter four considers various criteria, eg. pedagogic, linguistic and sociolinguistic for determining the macro-structure of learner's dictionary with a focus on specific Ll speakers. Chapter five is concerned with various aspects of the semantic information provided in the dictionaries matched against the needs of Pakistani learners with regard to both comprehension and production. The type, scale and presentation of grammatical information in the dictionary is analysed in chapter six with the object of discovering their role and utility for the learner. Chapter seven explores the rationale for providing phonological information, the extent to which this guidance is vital and the problems of phonetic symbols employed in the dictionaries. Chapter eight brings into perspective the historical background of English-Urdu bilingual lexicography and evalutes the currently popular bilingual dictionaries among the student community, with the aim of discovering the extent to which they have taken account of the modern tents of lexicography and investigating their validity as a useful reference tool in the learning of English language. The final chapter concludes the findings of individual aspects in a coherent fashion to assess the viability of the original hypothesis that learners' dictionaries if compiled with a specific set of users in mind would be more useful.

Leisure at work in Britain, West Germany, France and Japan : a cross-cultural comparative study

The aim of this thesis was to investigate the impact of changing values and attitudes toward work and the workplace in Britain, West Germany, France and Japan. A cross-national approach was adopted in order to gain a better understanding of differences and similarities in behaviour and to identify aspects specific to each society. Although the relationship between work and leisure has been thoroughly examined and there is a growing body of literature on changes in the values associated with these two phenomena, little research has been carried out into leisure at work. Studies of work time have tended to consider it as a homogeneous block, whereas recent research suggests that more attention should be devoted to unravelling the multiple uses of time at the workplace. The present study sought to review and analyse this new approach to the study of work time, and special attention is devoted to an examination of definitions of leisure, recreation, free time and work within the context of the workplace. The cross-cultural comparative approach gave rise to several problems due to the number of countries involved and the unusual combination of factors being investigated. The main difficulties were differences in the amount and quality of literature available, the non-comparability of existing data, definitions of concepts and socio-linguistic terms, and problems over access to organizations for fieldwork. Much of the literature generalizes about patterns of behaviour and few authors isolate factors specific to particular societies. In this thesis new empirical work is therefore used to ascertain the extent to which generalizations can be made from the literature and characteristics peculiar to each of the four countries identified. White-collar employees in large, broadly comparable companies were studied using identical questionnaires in the appropriate language. Respondents selected were men and women, aged between 20-65 years and either managers or non-managers. Patterns of leisure at work were found to be broadly similar in the national contexts, but with the Japanese and the West Germans experiencing the least leisure at work, and the British and the French perceiving the most. The general trend seems to be toward convergence of attitudes regarding leisure at work in the four countries. Explanations for variations in practice were sought within the wider societal contexts of each country.

A sociological analysis of four police consultative committees in Birmingham

Consultation between the police and the community was a recommendation of Lord Scarman in his report into the Brixton riots in 1981. By 1982 the West Midlands Police Authority had established local consultative committees on each police sub-division. This thesis is a study of four Police Consultative Committees in Birmingham, using qualitative methods of attendance at committee meetings and interviews with committee members. The research was carried out between 1990 and 1992 - ten years after formal consultation was established, and aimed to examine the relationship between the micro social processes of the committees and key sociological theoretical concepts. The analysis of the four committees contextualises them within the social and political parameters of urban policing in the late 1980s. Each committee is taken as a case study to highlight the following aspects of consultation:- relations between the police and black communities; membership, representation and accountability; responding to community conflict; crime prevention agencies and networks of social control. The findings are then generalised to the sociological theoretical concepts of hegemony, legitimation, community conflict and social control. The central proposition of this thesis is that, whilst these committees are not fulfilling the role Lord Scarman envisaged for them (of involving local community representatives in policing strategies and policies), they do have important policing and political roles. It is argued that they offer a platform from which senior police officers can engage local people into supporting policing objectives without actually involving them in determining those objectives. Furthermore, such committees have political symbolism in that they enable the government to be seen to be responding to the issues of accountability and relations between the police and black communities following the urban disorders, without actually devolving any statutory powers to the community.

Aspects of health among an employed population

This survey collected information on aspects of health amongst an employed population, employees in 14 different organisations in the West Midlands Regional Health Authority; and was a stratified sample of senior managers, middle managers and operatives. Nine hundred and sixty questionnaires were distributed asking for both quantitative and qualitative information on 58 questions covering health, work, family, leisure activities and life-style. A response rate of 48% (459 returned questionnaires) came from 290 men (63%), 165 women (36%) and four people (1%) who did not answer the gender question. The initial findings from this study are unique in that there has not been a specific review of the health of people at work. In answer to the main research questions, 92% felt they were healthy. Compared to others of a similar age, 34% felt their health was `above average', 58% `average', and 7&37 `below average'. Thirty two percent of respondents had visited their GP in the past 1-2 months; the highest reason given was disorders of the respiratory system, 20%. People's perceptions on the effects of work on their health were: good effect, 13% fair effect, 20% no effect, 27% poor effect, 27% and bad effect, 7%. The effects of leisure activities on health were thought to be more positive: good effect, 46% fair effect, 20% no effect, 21% poor effect, 3% and bad effect, 2%. The perceptions of effects of life-style on health were considered to be: good effect, 32% fair effect, 32% no effect, 20% poor effect, 9% and bad effect, 1%.  In this survey, leisure and life-style were seen by employees to have more beneficial effects on health than work. Future implications include a review of occupational health as a major policy development area within primary care. There is a need to influence the education and training of health care practitioners in order to affect their ability to practise effectively in this new and challenging area of work.

Biochemical aspects of Tourette's Syndrome

Kynurenine (KYN) is the first stable metabolite of the kynurenine pathway, the major route of tryptophan. (TRP) metabolIsm. In the liver, cortisol-inducible tIyptophan-2,3-dioxygenase (TDO) is the first enzyme and rate limiting step. In extrahepatic tissues, it is superceded by indoleamine-2,3-dioxygenase (IDO), an enzyme with a wider substrate specificity. Earlier work in this research group has found substantial elevations in plasma KYN in fasting Tourette's Syndrome (TS) patients with normal TRP and neopterin. The aim of our initial pilot study was to confirm this increase in KYN in fasting human TS patients compared with normal controls, and to see how changes in diet :ay influence certain kynurenine pathway variables. However, we failed to detect a change in plasma KYN, TRP, kynurenic acid (KYNA), neopterin or cortisol between the fasting TS and control groups. Moreover, none of the variables was affected by dietary status, and thus candidates selected for the larger cross-sectional study were permitted to eat and drink freely on the day that blood samples were submitted, but were requested to avoid products containing caffeine, aspirin or nicotine. In the cross-sectional study, TS patients exhibited significantly higher plasma KYN concentrations than controls, although the magnitude of the change was much smaller than originally found. This may be due to differences in detection procedure and the seasonal fluctuation of some biochemical variables, notably cortisol. The generalised increase in neopterin in the TS subject group, suggests a difference in the activity of cytokine-inducible IDO as a likely source for this elevated KYN. Other kynurenine pathway metabolites, specifIcally TRP, 3-hydroxykynurenine (HKY), 3-hydroxyanthranilic acid (HAA) and KYNA were unchanged. In view of recent speculation of the potential therapeutic effects of nicotine in TS, the lower KYN concentrations observed in TS smokers, compared with non-smoking TS patients, was another interesting finding. Tic-like movements, such as head-shakes (HS), which occur in rodents both spontaneously and following diverse drug treatments, closely resemble tic behaviours in humans. The animal tic model was used to examine what effects nicotine may have on shaking behaviours and on selected TRP metabolites. Acute systemic administration of nicotine to mice, produced a dose-dependent reduction in HS frequency (induced by the 5-HT2A/2C agonist DOl), which appeared to be mediated via central nicotinic cholinergic receptors, since mecamylamine pretreatment abolished this effect. Conversely, twice daily subcutaneous injections of nicotine for 7 days, led to an increase in spontaneous and DOI-induced HS. Chronic nicotine also caused a significant elevation m plasma and whole brain KYN concentrations, but plasma TRP, HKY, HAA and KYNA were unaltered. In addition, no change in brain 5-HT or 5-HIAA concentrations or 5-HT turnover, was found. Despite contrasting results from human and animal studIes, a role for nicotine in the mediation of tic-like movements is indicated. The relevance of the kynurenine pathway to TS and the potential role played by nicotine in modifying tic-like behaviours is discussed.

Some aspects of the analytical chemistry of malathion

A thorough investigation of the recommended colorimetric method for the determination of malathion (an organophosphorus pesticide) has led to the identification of the major cause of all the problems with which the method suffers. The method, which involves the extraction of the copper (II) complex or the hydrolysis product of malathion from aqueous solution into immiscible organic solvents, has many drawbacks. For example, the colour of the organic extract fades very quickly and a slight increase in the contact time of the hydrolysis product and the copper reagent within the aqueous solution, results in a decrease in the ab-solute absorbance. Also, the presence of any reducing agents can be a significant source of error. In the present work, it has been shown that the basic cause of all these problems is the ability of copper (II) ion to be reduced to copper (I) ion. It has further been shown that these problems can be resolved by re-placing copper (II) by bismuth (III). This has led to the development of a modified colorimetric method for the determination. of malathion, which has distinct advantages over all other existing methods in terms of reagents required, ease in application, avoidance of interferences and stability of colour for extended periods of time. The modified colorimetric method described above has been further improved by making use of a ligand exchange reaction involving dithizone. The resulting final organic extract in this case is bright orange in colour, the absorbance of which can be measured even with simple photometers. The usefulness of the modified colorimetric method has been demonstrated by determining malathion in technical products, and in aqueous solution containing the compound down to sub ppm levels. The scope and applicability of atomic absorption spectrophotometry has been extended by demonstrating for the first time that the technique can be used for the indirect determination of malathion. Almost all of the work described above has been accepted for publication by international journals and considerable interest in the work has been shown by chemists working in the field of pesticide analysis and research.

Aspects of the design and control of manufacturing systems subject to demand uncertainty

The recent explosive growth in advanced manufacturing technology (AMT) and continued development of sophisticated information technologies (IT) is expected to have a profound effect on the way we design and operate manufacturing businesses. Furthermore, the escalating capital requirements associated with these developments have significantly increased the level of risk associated with initial design, ongoing development and operation. This dissertation has examined the integration of two key sub-elements of the Computer Integrated Manufacturing (CIM) system, namely the manufacturing facility and the production control system. This research has concentrated on the interactions between production control (MRP) and an AMT based production facility. The disappointing performance of such systems has been discussed in the context of a number of potential technological and performance incompatibilities between these two elements. It was argued that the design and selection of operating policies for both is the key to successful integration. Furthermore, policy decisions are shown to play an important role in matching the performance of the total system to the demands of the marketplace. It is demonstrated that a holistic approach to policy design must be adopted if successful integration is to be achieved. It is shown that the complexity of the issues resulting from such an approach required the formulation of a structured design methodology. Such a methodology was subsequently developed and discussed. This combined a first principles approach to the behaviour of system elements with the specification of a detailed holistic model for use in the policy design environment. The methodology aimed to make full use of the `low inertia' characteristics of AMT, whilst adopting a JIT configuration of MRP and re-coupling the total system to the market demands. This dissertation discussed the application of the methodology to an industrial case study and the subsequent design of operational policies. Consequently a novel approach to production control resulted. A central feature of which was a move toward reduced manual intervention in the MRP processing and scheduling logic with increased human involvement and motivation in the management of work-flow on the shopfloor. Experimental results indicated that significant performance advantages would result from the adoption of the recommended policy set.

Some aspects of drill performance

High speed twist drills are probably the most common of all metal cutting tools and also the least efficient. In this study, detailed research was undertaken into aspects of drill performance and ways in which drilling could be improved in short hole depths of up to two diameters. The work included an evaluation of twist drill geometry and grinding parameters. It was established that errors in point grinding lead to increased hole oversize and reduced drill life. A fundamental analysis was made to establish predictive equations for the drill torque and thrust using modified orthogonal cutting equations and empirical data. A good correlation was obtained between actual and predicted results. Two new techniques for extending twist drill life by the use of coolant feeding holes and also the application of titanium nitride coatings were evaluated. Both methods were found to have potential for improving drill performance. A completely new design of carbide tipped drill was designed and developed. The new design was tested and it compared favourably with two commercially available carbide tipped drills. In further work an entirely different type of drill point geometry was developed for the drill screw. A new design was produced which enabled the drilling time to be minimised for the low thrust forces that were likely to be used with hand held power tools.

The influence of cutting tool geometry upon aspects of chip flow and tool wear:a theoretical, three dimensional examination of the cutting geometry and the shape of the twist drill

This work is undertaken in the attempt to understand the processes at work at the cutting edge of the twist drill. Extensive drill life testing performed by the University has reinforced a survey of previously published information. This work demonstrated that there are two specific aspects of drilling which have not previously been explained comprehensively. The first concerns the interrelating of process data between differing drilling situations, There is no method currently available which allows the cutting geometry of drilling to be defined numerically so that such comparisons, where made, are purely subjective. Section one examines this problem by taking as an example a 4.5mm drill suitable for use with aluminium. This drill is examined using a prototype solid modelling program to explore how the required numerical information may be generated. The second aspect is the analysis of drill stiffness. What aspects of drill stiffness provide the very great difference in performance between short flute length, medium flute length and long flute length drills? These differences exist between drills of identical point geometry and the practical superiority of short drills has been known to shop floor drilling operatives since drilling was first introduced. This problem has been dismissed repeatedly as over complicated but section two provides a first approximation and shows that at least for smaller drills of 4. 5mm the effects are highly significant. Once the cutting action of the twist drill is defined geometrically there is a huge body of machinability data that becomes applicable to the drilling process. Work remains to interpret the very high inclination angles of the drill cutting process in terms of cutting forces and tool wear but aspects of drill design may already be looked at in new ways with the prospect of a more analytical approach rather than the present mix of experience and trial and error. Other problems are specific to the twist drill, such as the behaviour of the chips in the flute. It is now possible to predict the initial direction of chip flow leaving the drill cutting edge. For the future the parameters of further chip behaviour may also be explored within this geometric model.

Economic aspects of safety in the Greek construction industry

The thesis addresses the economic impacts of construction safety in Greece. The research involved the development of a methodology for determining the overall costs of safety, namely the sum of the costs of accidents and the costs of safety management failures (with or without accident) including image cost. Hitherto, very little work has been published on the cost of accidents in practical case studies. Moreover, to the author’s belief, no research has been published that seeks to determine in real cases the costs of prevention. The methodology developed is new, transparent, and capable of being replicated and adapted to other employment sectors and to other countries. The methodology was applied to three construction projects in Greece to test the safety costing methodology and to offer some preliminary evidence on the business case for safety. The survey work took place between 1999 and 2001 and involved 27 months of costing work on site. The study focuses on the overall costs of safety that apply to the main (principal) contractor. The methodology is supported by 120 discrete cost categories, and systematic criteria for determining which costs are included (counted) in the overall cost of safety. A quality system (in compliance with ISO9000 series) was developed to support the work and ensure accuracy of data gathering. The results of the study offer some support for the business case for safety. Though they offer good support for the economics of safety as they demonstrate need for cost effectiveness. Subject to important caveats, those projects that appeared to manage safety more cost-effectively achieved the lowest overall safety cost. Nevertheless, results are significantly lower than of other published works for two main reasons; first costs due to damages with no potential to injury were not included and second only costs to main constructor were considered. Study’s results are discussed and compared with other publish works.

School mathematics and dyslexia: aspects of the interrelationship

This investigation sought to explore the nature and extent of school mathematical difficulties among the dyslexic population. Anecdotal reports have suggested that many dyslexics may have difficulties in arithmetic, but few systematic studies have previously been undertaken. The literature pertaining to dyslexia and school mathematics respectively is reviewed. Clues are sought in studies of dyscalculia. These seem inadequate in accounting for dyslexics' reported mathematical difficulties. Similarities between aspects of language and mathematics are examined for underlying commonalities that may partially account for concomitant problems in mathematics, in individuals with a written language dysfunction. The performance of children taught using different mathematics work-schemes is assessed to ascertain if these are associated with differential levels of achievement that may be reflected in the dyslexic population few are found. Findings from studies designed to assess the relationship between written language failure and achievement in mathematics are reported. Study 1 reveals large correlational differences between subtest scores (Wechsler Intelligence Scale for Children, Wechsler, 1976) and three mathematics tests, for young dyslexics and children without literacy difficulties. However, few differences are found between levels of attainment, at this age (6 ½ - 9 years). Further studies indicate that, for dyslexics, achievement in school mathematics, may be independent of measured intelligence, as is the case with their literacy skills. Studies 3 and 4 reveal that dyslexics' performances on a range of school mathematical topics gets relatively worse compared with that of Controls (age range 8 - 17 years), as they get older. Extensive item analyses reveal many errors relating strongly to known deficits in the dyslexics' learning style - poor short-term memory, sequencing skills and verbal labelling strategies. Subgroups of dyslexics are identified on the basis of mathematical performance. Tentative explanations, involving alternative neuropsychological approaches, are offered for the measured differences in attainment between these groups.