Simultaneous measurement of temperature and external refractive index by use of a hybrid grating in D fiber with enhanced sensitivity by HF etching

We propose a dual-parameter optical sensor device achieved by UV inscription of a hybrid long-period grating-fiber Bragg grating structure in D fiber. The hybrid configuration permits the detection of the temperature from the latter's response and measurement of the external refractive index from the former's response. In addition, the host D fiber permits effective modification of the device's sensitivity by cladding etching. The grating sensor has been used to measure the concentrations of aqueous sugar solutions, demonstrating its potential capability to detect concentration changes as small as 0.01%.

Simultaneous measurement of temperature and external refractive index by use of a hybrid grating in D fiber with enhanced sensitivity by HF etching

We propose a dual-parameter optical sensor device achieved by UV inscription of a hybrid long-period grating-fiber Bragg grating structure in D fiber. The hybrid configuration permits the detection of the temperature from the latter's response and measurement of the external refractive index from the former's response. In addition, the host D fiber permits effective modification of the device's sensitivity by cladding etching. The grating sensor has been used to measure the concentrations of aqueous sugar solutions, demonstrating its potential capability to detect concentration changes as small as 0.01%.

Evaluating the use of IT by the third party logistics in South East Asia to achieve competitive advantage and its future trend

As the number of using 3PL providers are increasing rapidly in recent years, 3PL providers play a major role in the logistics industry. Due to customers demands are raising and changing, it has facilitated 3PL providers to invest IT systems that could meet customer requirements and create competitive advantage. The use of IT systems could assist 3PL providers to achieve supply chain visibility and enhance supply chain collaboration with business partners. In this paper, it is mainly focus on the Europe and Far East 3PL providers in terms of current and future IT systems, IT motivators and barriers, as well as the future supply chain demands that address by IT systems. The common IT system that implemented in both regions is information technology, which is mainly used to collaborate and share information with supply chain partners. Some of the common motivations and barriers were existed and 3PL providers need to be understood. Given the future demands of IT implementation and supply chain collaboration, IT systems such as RFID and integration systems would be strongly focus in the future. The suggestion about the advanced integration system such as business process management (BPM) could be the next key IT systems in the future logistics industry. © 2012 AICIT.

The association between the use of IP by UK SMEs in 2001 and subsequent performance in 2002 to 2004

This report analyses the 2001 cohort of UK SMEs. The specific focus is on the link between IP activity in 2001 and subsequent performance (to 2004). The 2001 cohort contains 130,082 SMEs of which 3,123 were IP active (2.4%). Specifically, 1,872 SMEs had at least one UK trade mark publication; 697 had one or more Community trade mark registrations; 646 SMEs had one or more UK patents; and 443 had one or more EPO patent publications. The outcome and financial performance of the SMEs is analysed in various ways. Initially, we look at the determinants of survival to 2004. We then look at growth of assets and turnover for the period 2001 to 2004.

Investigating the current and future use of it by 3PL providers in europe and the far east

The paper investigates the role of current and future IT applications in 3PL services in Europe and the Far East. For clients' competitive advantage, 3PL providers increasingly contribute IT systems to logistics, helping 3PL providers to enhance supply chain collaboration with business partners. Through qualitative interviews, questionnaires and secondary data analysis, common attributes of both regions' IT systems are identified which enable supply chain partners to collaborate and share information. Most companies already implement IT systems for processing transactions, but recognized motivations and barriers remain, since 3PL providers incompletely understand clients' IT requirements. Long-term productivity gains require sophisticated IT systems to streamline cycles and improve supply chain visibility, thus facilitating planning and decision-making.

Use of computational fluid dynamics in the design of bubble column reactors

Investigations into the modelling techniques that depict the transport of discrete phases (gas bubbles or solid particles) and model biochemical reactions in a bubble column reactor are discussed here. The mixture model was used to calculate gas-liquid, solid-liquid and gasliquid-solid interactions. Multiphase flow is a difficult phenomenon to capture, particularly in bubble columns where the major driving force is caused by the injection of gas bubbles. The gas bubbles cause a large density difference to occur that results in transient multi-dimensional fluid motion. Standard design procedures do not account for the transient motion, due to the simplifying assumptions of steady plug flow. Computational fluid dynamics (CFD) can assist in expanding the understanding of complex flows in bubble columns by characterising the flow phenomena for many geometrical configurations. Therefore, CFD has a role in the education of chemical and biochemical engineers, providing the examples of flow phenomena that many engineers may not experience, even through experimentation. The performance of the mixture model was investigated for three domains (plane, rectangular and cylindrical) and three flow models (laminar, k-e turbulence and the Reynolds stresses). mThis investigation raised many questions about how gas-liquid interactions are captured numerically. To answer some of these questions the analogy between thermal convection in a cavity and gas-liquid flow in bubble columns was invoked. This involved modelling the buoyant motion of air in a narrow cavity for a number of turbulence schemes. The difference in density was caused by a temperature gradient that acted across the width of the cavity. Multiple vortices were obtained when the Reynolds stresses were utilised with the addition of a basic flow profile after each time step. To implement the three-phase models an alternative mixture model was developed and compared against a commercially available mixture model for three turbulence schemes. The scheme where just the Reynolds stresses model was employed, predicted the transient motion of the fluids quite well for both mixture models. Solid-liquid and then alternative formulations of gas-liquid-solid model were compared against one another. The alternative form of the mixture model was found to perform particularly well for both gas and solid phase transport when calculating two and three-phase flow. The improvement in the solutions obtained was a result of the inclusion of the Reynolds stresses model and differences in the mixture models employed. The differences between the alternative mixture models were found in the volume fraction equation (flux and deviatoric stress tensor terms) and the viscosity formulation for the mixture phase.

The use of driven equilibrium conditions in the measurement of NMR relaxation times

The further development of the use of NMR relaxation times in chemical, biological and medical research has perhaps been curtailed by the length of time these measurements often take. The DESPOT (Driven Equilibrium Single Pulse Observation of T1) method has been developed, which reduces the time required to make a T1 measurement by a factor of up to 100. The technique has been studied extensively herein and the thesis contains recommendations for its successful experimental application. Modified DESPOT type equations for use when T2 relaxation is incomplete or where off-resonance effects are thought to be significant are also presented. A recently reported application of the DESPOT technique to MR imaging gave good initial results but suffered from the fact that the images were derived from spin systems that were not driven to equilibrium. An approach which allows equilibrium to be obtained with only one non-acquisition sequence is presented herein and should prove invaluable in variable contrast imaging. A DESPOT type approach has also been successfully applied to the measurement of T1. T_1's can be measured, using this approach significantly faster than by the use of the classical method. The new method also provides a value for T1 simultaneously and therefore the technique should prove valuable in intermediate energy barrier chemical exchange studies. The method also gives rise to the possibility of obtaining simultaneous T1 and T1 MR images. The DESPOT technique depends on rapid multipulsing at nutation angles, normally less than 90^o. Work in this area has highlighted the possible time saving for spectral acquisition over the classical technique (90^o-5T_1)_n. A new method based on these principles has been developed which permits the rapid multipulsing of samples to give T_1 and M_0 ratio information. The time needed, however, is only slightly longer than would be required to determine the M_0 ratio alone using the classical technique. In ^1H decoupled ^13C spectroscopy the method also gives nOe ratio information for the individual absorptions in the spectrum.

The use of ICT by logistics service providers and implications for training needs:a cross-country perspective

Changes in the international economic scenario in recent years have made it necessary for both industrial and service firms to reformulate their strategies, with a strong focus on the resources required for successful implementation. In this scenario, information and communication technologies (ICT) has a potentially vital role to play both as a key resource for re-engineering business processes within a framework of direct connection between suppliers and customers, and as a source of cost optimisation. There have also been innovations in the logistics and freight transport industry in relation to ICT diffusion. The implementation of such systems by third party logistics providers (3PL) allows the real-time exchange of information between supply chain partners, thereby improving planning capability and customer service. Unlike other industries, the logistics and freight transport industry is lagging somewhat behind other sectors in ICT diffusion. This situation is to be attributed to a series of both industry-specific and other factors, such as: (a) traditional resistance to change on the part of transport and logistics service providers; (b) the small size of firms that places considerable constraints upon investment in ICT; (c) the relative shortage of user-friendly applications; (d) the diffusion of internal standards on the part of the main providers in the industry whose aim is to protect company information, preventing its dissemination among customers and suppliers; (e) the insufficient degree of professional skills for using such technologies on the part of staff in such firms. The latter point is of critical importance insofar as the adoption of ICT is making it increasingly necessary both to develop new technical skills to use different hardware and new software tools, and to be able to plan processes of communication so as to allow the optimal use of ICT. The aim of this paper is to assess the impact of ICT on transport and logistics industry and to highlight how the use of such new technologies is affecting providers' training needs. The first part will provide a conceptual framework of the impact of ICT on the transport and logistics industry. In the second part the state of ICT dissemination in the Italian and Irish third party logistics industry will be outlined. In the third part, the impact of ICT on the training needs of transport and logistics service providers - based on case studies in both countries - are discussed. The implications of the foregoing for the development of appropriate training policies are considered. For the covering abstract see ITRD E126595.

The use of computational QSAR analysis in the toxicological evaluation of a series of 2-pyridylcarboxamidrazone candidate anti-tuberculosis compounds

A series of N1-benzylidene pyridine-2-carboxamidrazone anti-tuberculosis compounds has been evaluated for their cytotoxicity using human mononuclear leucocytes (MNL) as target cells. All eight compounds were significantly more toxic than dimethyl sulphoxide control and isoniazid (INH) with the exception of a 4-methoxy-3-(2-phenylethyloxy) derivative, which was not significantly different in toxicity compared with INH. The most toxic agent was an ethoxy derivative, followed by 3-nitro, 4-methoxy, dimethylpropyl, 4-methylbenzyloxy, 3-methoxy-4-(-2-phenylethyloxy) and 4-benzyloxy in rank order. In comparison with the effect of selected carboxamidrazone agents on cells alone, the presence of either N-acetyl cysteine (NAC) or glutathione caused a significant reduction in the toxicity of INH, as well as on the 4-benzyloxy derivative, although both increased the toxicity of a 4-N,N-dimethylamino-1-naphthylidene and a 2-t-butylthio derivative. The derivatives from this and three previous studies were subjected to computational analysis in order to derive equations designed to establish quantitative structure activity relationships for these agents. Twenty-five compounds were thus resolved into two groups (1 and 2), which on analysis yielded equations with r2 values in the range 0.65-0.92. Group 1 shares a common mode of toxicity related to hydrophobicity, where cytotoxicity peaked at logP of 3.2, while Group 2 toxicity was strongly related to ionisation potential. The presence of thiols such as NAC and GSH both promoted and attenuated toxicity in selected compounds from Group 1, suggesting that secondary mechanisms of toxicity were operating. These studies will facilitate the design of future low toxicity high activity anti-tubercular carboxamidrazone agents. © 2003 Elsevier Science B.V. All rights reserved.

On the use of likert-type scales in multilevel data:Influence on aggregate variables

In multilevel analyses, problems may arise when using Likert-type scales at the lowest level of analysis. Specifically, increases in variance should lead to greater censoring for the groups whose true scores fall at either end of the distribution. The current study used simulation methods to examine the influence of single-item Likert-type scale usage on ICC(1), ICC(2), and group-level correlations. Results revealed substantial underestimation of ICC(1) when using Likert-type scales with common response formats (e.g., 5 points). ICC(2) and group-level correlations were also underestimated, but to a lesser extent. Finally, the magnitude of underestimation was driven in large part to an interaction between Likert-type scale usage and the amounts of within- and between-group variance. © Sage Publications.

The role of prior exposure on the capture of attention by items in working memory

The Biased Competition Model (BCM) suggests both top-down and bottom-up biases operate on selective attention (e.g., Desimone & Duncan, 1995). It has been suggested that top-down control signals may arise from working memory. In support, Downing (2000) found faster responses to probes presented in the location of stimuli held vs. not held in working memory. Soto, Heinke, Humphreys, and Blanco (2005) showed the involuntary nature of this effect and that shared features between stimuli were sufficient to attract attention. Here we show that stimuli held in working memory had an influence on the deployment of attentional resources even when: (1) It was detrimental to the task, (2) there was equal prior exposure, and (3) there was no bottom-up priming. These results provide further support for involuntary top-down guidance of attention from working memory and the basic tenets of the BCM, but further discredit the notion that bottom-up priming is necessary for the effect to occur.

The use of lichen growth rings in lichenometry: some preliminary findings

Certain species of crustose lichens have concentrically zoned margins which probably represent yearly growth rings. These marginal growth rings offer an alternative method of studying annual growth fluctuations, establishing growth rate-size curves, and determining the age of thalli for certain crustose species. Hence, marginal growth rings represent a potentially valuable, unexploited, tool in lichenometry. In a preliminary study, we measured the widths of the successive marginal rings in 25 thalli of Ochrolechia parella (L.) Massal., growing at a maritime site in north Wales. Mean ring widths of all thalli varied from a minimum of 1.02 mm (the outermost ring) to a maximum of 2.06 mm (the third ring from the margin). There is some suggestion that marginal ring width and thallus size are positively correlated; and hence that growth rates increase in larger thalli in this small population. In a further study on recently exposed bedrock adjacent to Breidalon, SE Iceland, we examined the potential for using marginal growth rings to estimate thallus age of a lichen tentatively identified as a Rhizocarpon (possibly R. concentricum (Davies) Beltram.) and thus confirm the timing of surface exposure (c. 50 years). Collectively, these results suggest: 1) the measurement of marginal rings is a possible alternative method of studying the growth of crustose lichens; 2) O. parella may grow differently to other crustose species, exhibiting a rapidly increasing radial growth rate in thalli >40 mm; 3) where lichens with marginal rings grow on recently exposed surfaces (<60 yrs), minimum age estimates can be made using growth rings as an in situ indication of lichen growth rate; 4) it is suggested that this phenomenon could provide a valuable, previously unexploited, in situ lichenometric-dating tool in areas lacking calibration control.