A failure criterion for fillet welds

The work constitutes a study of the strength of mild steel fillet welds subject to static loading, and the behaviour of flange welded beam-column connections under combined bending and shear. Tests are conducted on short welds in the as-welded and stress relieved conditions, and also on full-size beam-column connections. It is shown that welds under compression have a lower strength than when under tension. Failure of the fillet weld is initiated at the weld root, the important factor controlling the initiation being weld ductility. The greater the residual stress, the lower the weld ductility and ultimate strength. Thermal stress relieving increases strength by as much as 30%. Weld failure plane is rarely at the throat and varies from 0° to 45° depending upon loading condition. Failure plane average stresses are related by a circular function which is expressed in terms of externally applied forces at limit state. The tension weld of a flange-welded beam-column connection always fails before the compression weld. The shear load sharing between the welds is a complex function of elastic compression of the web, elastic/plastic deformation of the flanges, load/deformation characteristics, and the type of load application. Bearing forces between the compression flange and column face produce low level bearing stresses and frictional forces which make a negligible contribution to shear load resistance. Three modes of connection failure are possible; 'end mode', 'bending mode' and 'shear mode', with a sudden change taking place between the two latter.

Building cliques and alliances as practices to 'make things happen' in complex networks

The Roma population has become a policy issue highly debated in the European Union (EU). The EU acknowledges that this ethnic minority faces extreme poverty and complex social and economic problems. 52% of the Roma population live in extreme poverty, 75% in poverty (Soros Foundation, 2007, p. 8), with a life expectancy at birth of about ten years less than the majority population. As a result, Romania has received a great deal of policy attention and EU funding, being eligible for 19.7 billion Euros from the EU for 2007-2013. Yet progress is slow; it is debated whether Romania's government and companies were capable to use these funds (EurActiv.ro, 2012). Analysing three case studies, this research looks at policy implementation in relation to the role of Roma networks in different geographical regions of Romania. It gives insights about how to get things done in complex settings and it explains responses to the Roma problem as a „wicked‟ policy issue. This longitudinal research was conducted between 2008 and 2011, comprising 86 semi-structured interviews, 15 observations, and documentary sources and using a purposive sample focused on institutions responsible for implementing social policies for Roma: Public Health Departments, School Inspectorates, City Halls, Prefectures, and NGOs. Respondents included: governmental workers, academics, Roma school mediators, Roma health mediators, Roma experts, Roma Councillors, NGOs workers, and Roma service users. By triangulating the data collected with various methods and applied to various categories of respondents, a comprehensive and precise representation of Roma network practices was created. The provisions of the 2001 „Governmental Strategy to Improve the Situation of the Roma Population‟ facilitated forming a Roma network by introducing special jobs in local and central administration. In different counties, resources, people, their skills, and practices varied. As opposed to the communist period, a new Roma elite emerged: social entrepreneurs set the pace of change by creating either closed cliques or open alliances and by using more or less transparent practices. This research deploys the concept of social/institutional entrepreneurs to analyse how key actors influence clique and alliance formation and functioning. Significantly, by contrasting three case studies, it shows that both closed cliques and open alliances help to achieve public policy network objectives, but that closed cliques can also lead to failure to improve the health and education of Roma people in a certain region.

A systems and cybernetic perspective on complex problem solving

This thesis is concerned with Organisational Problem Solving. The work reflects the complexities of organisational problem situations and the eclectic approach that has been necessary to gain an understanding of the processes involved. The thesis is structured into three main parts. Part I describes the author's understanding of problems and suitable approaches. Chapter 2 identifies the Transcendental Realist (TR) view of science (Harre 1970, Bhaskar 1975) as the best general framework for identifying suitable approaches to complex organisational problems. Chapter 3 discusses the relationship between Checkland's methodology (1972) and TR. The need to generate iconic (explanatory) models of the problem situation is identified and the ability of viable system modelling to supplement the modelling stage of the methodology is explored in Chapter 4. Chapter 5 builds further on the methodology to produce an original iconic model of the methodological process. The model characterises the mechanisms of organisational problem situations as well as desirable procedural steps. The Weltanschauungen (W's) or "world views" of key actors is recognised as central to the mechanisms involved. Part II describes the experience which prompted the theoretical investigation. Chapter 6 describes the first year of the project. The success of this stage is attributed to the predominance of a single W. Chapter 7 describes the changes in the organisation which made the remaining phase of the project difficult. These difficulties are attributed to a failure to recognise the importance of differing W's. Part III revisits the theoretical and organisational issues. Chapter 8 identifies a range of techniques embodying W's which are compatible with .the framework of Part I and which might usefully supplement it. Chapter 9 characterises possible W's in the sponsoring organisation. Throughout the work, an attempt 1s made to reflect the process as well as the product of the author's leaving.

Deformation and failure of welded steels used in offshore constructions

Hydrocarbons are the most common form of energy used to date. The activities involving exploration and exploitation of large oil and gas fields are constantly in operation and have extended to such hostile environments as the North Sea. This enforces much greater demands on the materials which are used, and the need for enhancing the endurance of the existing ones which must continue parallel to the explorations. Due to their ease in fabrication, relatively high mechanical properties and low costs, steels are the most widely favoured material for the construction of offshore platforms. The most critical part of an offshore structure prone to failure are the welded nodal joints, particulary those which are used within the vicinity of the splash zones. This is an area of high complex stress concentrations, varying mechanical and metallurgical properties in addition to severe North Sea environmental conditions. The main are of this work has been concerned with the durability studies of this type of steel, based on the concept of the worst case analysis, consisting of combinations of welds of varying qualities, various degrees of stress concentrations and the environmental conditions of stress corrosion and hydrogen embrittlement. The experiments have been designed to reveal significance of defects as sites of crack initiation in the welded steels and the extent to which stress corrosion and hydrogen embrittlement will limit their durability. This has been done for various heat treatments and in some experiments deformation has been forced through the welded zone of the specimens to reveal the mechanical properties of the welds themselves to provide data for finite element simulations. A comparison of the results of these simulations with the actual deformation and fracture behaviour has been done to reveal the extent to which both mechanical and metallurgical factors control behaviour of the steels in the hostile environments of high stress, corrosion, and hydrogen embrittlement at their surface.

Failure in composite materials

The economic and efficient exploitation of composite materials in critical load bearing applications relies on the ability to predict safe operational lives without excessive conservatism. Developing life prediction and monitoring techniques in these complex, inhomogeneous materials requires an understanding of the various failure mechanisms which can take place. This article describes a range of damage mechanisms which are observed in polymer, metal and ceramic matrix composites.

Involvement of NADPH oxidases in cardiac remodelling and heart failure

Cardiac remodelling occurs in response to stress, such as chronic hypertension or myocardial infarction, and forms the substrate for subsequent development of heart failure. Key pathophysiological features include ventricular hypertrophy, interstitial fibrosis, contractile dysfunction, and chamber dilatation. Although the molecular mechanisms are complex and not fully defined, substantial evidence now implicates increased oxidative stress as being important. The NADPH oxidase ('Nox') enzymes are a particularly important source of reactive oxygen species that are implicated in redox signalling. This article reviews the evidence for an involvement of NADPH oxidases in different aspects of adverse cardiac remodelling. A better understanding of the roles of this complex enzyme family may define novel therapeutic targets for the prevention of heart failure. Copyright © 2007 S. Karger AG.

Medical students' personal experience of high-stakes failure:case studies using interpretative phenomenological analysis

Abstract (provisional): Background Failing a high-stakes assessment at medical school is a major event for those who go through the experience. Students who fail at medical school may be more likely to struggle in professional practice, therefore helping individuals overcome problems and respond appropriately is important. There is little understanding about what factors influence how individuals experience failure or make sense of the failing experience in remediation. The aim of this study was to investigate the complexity surrounding the failure experience from the student’s perspective using interpretative phenomenological analysis (IPA). Methods The accounts of 3 medical students who had failed final re-sit exams, were subjected to in-depth analysis using IPA methodology. IPA was used to analyse each transcript case-by-case allowing the researcher to make sense of the participant’s subjective world. The analysis process allowed the complexity surrounding the failure to be highlighted, alongside a narrative describing how students made sense of the experience. Results The circumstances surrounding students as they approached assessment and experienced failure at finals were a complex interaction between academic problems, personal problems (specifically finance and relationships), strained relationships with friends, family or faculty, and various mental health problems. Each student experienced multi-dimensional issues, each with their own individual combination of problems, but experienced remediation as a one-dimensional intervention with focus only on improving performance in written exams. What these students needed to be included was help with clinical skills, plus social and emotional support. Fear of termination of the their course was a barrier to open communication with staff. Conclusions These students’ experience of failure was complex. The experience of remediation is influenced by the way in which students make sense of failing. Generic remediation programmes may fail to meet the needs of students for whom personal, social and mental health issues are a part of the picture.