Positive psychology approaches to public services leadership: An introduction to strengths-based leadership

To readers of the popular press, the words ‘positive psychology’ may conjure up images of happiness gurus and people having their feet massaged, their heads resting peacefully on pink, fluffy clouds. But in this article, our aim is to demonstrate how the new science of positive psychology speaks powerfully to - and has much to contribute to - the development of leadership and the practices and processes of organisations, whether in the public or private sectors. Much of our work is concerned with the applications of this new field, and particularly with building strengths-based organisations. A key pillar of this work is around enabling strengths-based leadership, and provides our focus for this article.

The fatigue properties of pressure diecast zinc-aluminium based alloys

The fatigue behaviour of the cold chamber pressure-die-cast alloys: Mazak3, ZA8, ZA27, M3K, ZA8K, ZA27K, K1, K2 and K3 was investigated at temperature of 20°C. The alloys M3K, ZA8K and ZA27K were also examined at temperatures of 50 and 100°C. The ratio between fatigue strength and tensile strength was established at 20°C at 107 cycles. The fatigue life prediction of the alloys M3K, ZA8K and ZA27K was formulated at 20, 50 and 100°C. The prediction formulae were found to be reasonably accurate. All of the experimental alloys were heterogeneous and contained large but varying amounts of pores. These pores were a major contribution and dominated the alloys fatigue failure. Their effect, however, on tensile failure was negligible. The ZA27K possessed the highest tensile strength but the lowest fatigue strength. The relationship between the fracture topography and the microstructure was also determined by the use of a mixed signal of a secondary electron and a back-scattered electron on the SEM. The tensile strength of the experimental alloys was directly proportional to the aluminium content within the alloys. The effect of copper content was also investigated within the alloys K1, K2, ZA8K and K3 which contained 0%, 0.5%, 1.0% and 2.0% respectively. It was determined that the fatigue and tensile strengths improved with higher copper contents. Upon ageing the alloys Mazak3, ZA8 and ZA27 at an ambient temperature for 5 years, copper was also found to influence and maintain the metastable Zn-Al (αm) phase. The copper free Mazak3 upon ageing lost this metastable phase. The 1.0% copper ZA8 alloy had lost almost 50% of its metastable phase. Finally the 2.0% copper ZA27 had merely lost 10% of its metastable phase. The cph zinc contained a limited number of slip systems, therefore twinning deformation was unavoidable in both fatigue and tensile testing.

Preparation, optimisation and characterisation of lyophilised rapid disintegrating tablets based on gelatin and saccharide

Despite recent success, rapidly disintegrating lyophilized tablets still face problems of low mechanical strength and higher disintegration times resulting in poor patient compliance. The aim of the current work was to carry out a systematic study to understand the factors controlling mechanical properties of these formulations. The work investigated the influence of two bloom strengths of gelatin: low (60 bloom) and high (225 bloom) at different stock solution concentrations (2, 5, 7.5, and 10 %w/w). This was followed by investigation of addition of five saccharides (xylitol, glucose, trehalose, maltotriose and mannitol) at varied concentration range (10-80 %w/w) to decipher their influence on disintegration time, mechanical and thermal properties of the formulation. The results indicated that the disintegration time of the tablets dramatically decreased by decreasing the concentration and bloom strength of gelatin in the stock solution. However the mechanical properties of the tablets were mainly influenced by the concentration of gelatin rather than the bloom strength. The addition of saccharides resulted in enhancement of tablet properties and was concentration dependent. All the saccharides improved the fractubility of the tablets significantly at high concentration (equal or higher than 40% w/w). However, only high concentration (equal or higher than 40% w/w) of trehalose, maltotriose and mannitol significantly enhanced the hardness. Additionally, mannitol crytallised during freeze drying and consequently produced elegant tablets, whilst the other saccarides exhibited lyoprotectant activity as they were able to retain amorphous status. Based on the above findings, an optimized formulation was also successfully developed and characterized to deliver 100 microg dose of Clonidine HCl.

The innovation value chain in new technology-based firms:evidence from the U.K.

Innovation is central to the survival and growth of firms, and ultimately to the health of the economies of which they are part. A clear understanding both of the processes by which firms perform innovation and the benefits which flow from innovation in terms of productivity and growth is therefore essential. This paper demonstrates the use of a conceptual framework and modeling tool, the innovation value chain (IVC), and shows how the IVC approach helps to highlight strengths and weaknesses in the innovation performance of a key group of firms-new technology-based firms. The value of the IVC is demonstrated in showing the key interrelationships in the whole process of innovation from sourcing knowledge through product and process innovation to performance in terms of the growth and productivity outcomes of different types of innovation. The use of the IVC highlights key complementarities, such as that between internal R&D, external R&D, and other external sources of knowledge. Other important relationships are also highlighted. Skill resources matter throughout the IVC, being positively associated with external knowledge linkages and innovation success, and also having a direct influence on growth independent of the effect on innovation. A key benefit of the IVC approach is therefore its ability to highlight the roles of different factors at various stages of the knowledge-innovation-performance nexus, and to show their indirect as well as direct impact. This in turn permits both managerial and policy implications to be drawn. © 2012 Product Development & Management Association.

Liquid level sensor based on an excessively tilted fibre grating

We propose and demonstrate an optical liquid level sensor based on the surrounding medium refractive index (SRI) sensing using an excessively tilted fibre grating (ETFG). When the ETFG submerged in water, two sets of cladding modes are coupled, corresponding to air- and water-surrounded grating structures, respectively. The coupling strengths of the two sets of cladding modes evolve with the submerging length of the grating, providing a mechanism to measure the liquid level. Comparing with long-period fibre grating based liquid level sensor, the ETFG sensor has a much higher SRI responsivity for liquids with refractive index around 1.33 and a lower thermal cross sensitivity. © 2013 Published by Elsevier B.V. All rights reserved.

Supercritical carbonation of lime based sustainable structural ceramics

Abstract Structural ceramics were manufactured from industrial byproducts and lime by a compression moulding/vacuum dewatering technique. Treatment of these ceramics with supercritical carbon dioxide was found to both significantly increase their flexural strength and activate cementation in the industrial byproducts at least as efficiently as heat curing. Flexural strengths of up to 10 MPa were achieved. Strength improvements were associated with decreased porosity and conversion of calcium hydroxide to calcium carbonate. Life cycle assessment of proposed products made from such materials indicated that the total reduction in embodied carbon dioxide achieved, as a result of combining use of byproducts with recombination of carbon dioxide, was up to 70%. © 2010 Institute of Materials, Minerals and Mining.

The strengths, weaknesses, opportunities and threats of using social software in higher and further education teaching and learning

Social software is increasingly being used in higher and further education to support teaching and learning processes. These applications provide students with social and cognitive stimulation and also add to the interaction between students and educators. However, in addition to the benefits the introduction of social software into a course environment can also have adverse implications on students, educators and the education institution as a whole, a phenomenon which has received much less attention in the literature. In this study we explore the various implications of introducing social software into a course environment in order to identify the associated benefits, but also the potential drawbacks. We draw on data from 20 social software initiatives in UK based higher and further education institutions to identify the diverse experiences and concerns of students and educators. The findings are presented in form of a SWOT analysis, which allows us to better understand the otherwise ambiguous implications of social software in terms of its strengths, weaknesses, opportunities and threats. From the analysis we have derived concrete recommendations for the use of social software as a teaching and learning tool.