Business strategy and the environment in a traditional manufacturing sector

This research is concerned with the relationship between business strategy and the environment within traditional sectors. It has sought to learn more about the strategic environmental attitudes of SMEs compared with large companies operating under the same market conditions. The sector studied is the ceramics industry (including tableware & ornamental-ware, sanitary ware & tiles, bricks, industrial & advanced ceramics and refractories) in the UK and France. Unlike the automotive, oil, chemical, steel or metal processing sectors, this industry is one of the few industrial sectors which has rarely been considered. The information on this sector was gathered by interviewing people responsible for environmental issues. The actual programme of valid interviews represents approximately a quarter of the UK and French ceramics industry which is large enough to enable a quantitative analysis and significant and non-biased conclusions. As a whole, all companies surveyed agreed that the ceramics activity impacts on the environment, and that they are increasingly affected both by environmental legislation, and by various non-legislative pressures. Approaches to the environmental agenda differ significantly among large and small companies. Smaller companies feel particularly pressed both by the financial costs and management time required to meet complex and changing legislation. The results of this survey also suggest that the ceramics industry sees environmental issues in terms of increased costs rather than new business opportunities. This is due principally to fears of import substitution from countries with lower environmental standards. Finally, replies indicate that generally there is a low level of awareness of the current legislative framework, suggesting a need to shift from a regulatory approach to a more self-regulated approach which encourages companies to be more proactive

Estimating additionality and leverage:between public and private sector equity finance in Ireland (2000 – 2002)

This paper aims to contribute to the debate about the role of the public sector in stimulating greater use of private sector equity for business start-up and growth in two ways. First, to examine the extent to which the provision of public sector equity finance enables individual firms to raise additional funds in the private sector market place. Second, to consider the methodological implications for an economic impact assessment of industrial policy interventions (especially those which include an equity component) at the level of the individual firm. We assess the extent to which there may be indirect positive effects (externalities) associated with public sector financial assistance to individual firms and if so how they distort standard evaluation methodologies designed to estimate the level of additionality of that support. The paper draws upon the results of a recent study of the impact of Enterprise Ireland (EI) financial assistance to indigenous Irish industry in the period 2000 to 2002. The paper demonstrates that a process of re-calibration is necessary in estimates of economic impact in order to account for these positive externalities and the result in this study was a ‘boost’ to additionality. In operational and conceptual terms, the study underlines the importance of the relationship between private and public sector sources of equity finance as an important dynamic in the attempt by industrial and regional policy to stimulate the number of firms with viable investment proposals accessing external equity finance.

Creation of relational assets through the 'library of equipment' model:an industrial modernization approach of Japan's local technology centres

SMEs with a weak internal R&D capacity show the tendency to shy away from using external sources of technical expertise. The tendency deters providers of industrial modernization services from supporting such structurally weak SMEs. This paper examines how Japan's local technology centres - kosetsushi - remove the bottleneck and reach out to a significant proportion of SMEs with a weak R&D capacity in their localities. Kosetsushi centres sustain habitual interactions with client firms through 'low information gap' services solving immediate needs and lead the clients to a riskier and longer path toward innovation capacity building. This gives kosetsushi centres a position distinct from universities and consultancies in the regional innovation system. While long-term relationships between kosetsushi centres and their client firms can increase switching costs and produce lock-in effects, a case study of two kosetsushi centres illustrates the importance of 'low-information gap' services and relational assets created thereby to the modernization of SMEs with a weak internal R&D capacity. The paper calls for long-term commitment by the public sector if it addresses the issue through modernization services.

Industrial relations in the road passenger transport industry-a political-economic analysis.

This thesis examines the British Bus and Tram Industry from 1889 to 1988. The first determinant of the pattern of industrial relations is the development of the labour-process. The labour process changes with the introduction of new technology (electrified trams and mechanised buses), the concentration and centralisation of ownership, the decline of competition, changing market position, municipal and state regulation, ownership and control. The tram industry, as a consequence of electrification, is almost wholly municipally owned and the history of the labour process from horse-trams to the decline of the industry is examined. The bus industry has a less unified structure and is examined by sector; London, Municipal, and Territorial/Provincial. The small independent sector is largely ignored. The labour process is examined from the horse-bus to the present day. The development of resistance in the labour process is discussed both as a theoretical problematic (the `Braverman Debate') and through the process of unionisation, the centralisation and bureaucratisation of the unions, the development of national bargaining structures (National Joint Industrial Council and the National Council for the Omnibus Industry), and the development of resistance to those processes. This resistance takes either a syndicalist form, or under Communist Party leadership the form of rank and file movements, or simply unofficial organisations of branch officials. The process of centralisation of the unions, bureaucratisation and the institutionalisation of bargaining and the relationship between this process and the role of the Unions in the Labour Party is examined. Neo-corporatism, that is the increasing integration of the leadership of the main Union, the T.G.W.U.with the Labour Party and with the State is discussed. In theoretical terms, this thesis considers the debate around the notion of `labour process', the relationship between labour process and labour politics and between labour process and labour history. These relationships are placed within a discussion of class consciousness.

New technology, industrial relations and white collar trade unions : the case of the National and Local Government Officers Association

The decade since 1979 has seen the most rapid introduction of microelectronic technology in the workplace. In particular, the scope offered for the application of this new technology to the area of white collar work has meant that it is a sector where trade unions have been confronted with major challenges. However the application of this technology has also provided trade unions with opportunities for exerting influence to reshape traditional attitudes to both industrial relations and the nature of work. Recent academic research on the trade union response to the introduction of new technology at the workplace suggests that, despite the resources and apparent sophistication of modern trade unions, they have not in general been able to take advantage of the opportunities offered during this period of radical technological change,the argument being that this is due both to structural weaknesses and the inappropriateness of the system of collective bargaining where new technology issues are concerned. Despite the significance of the Public Sector in employment terms, research into the response of public sector white collar trade unions to technological change has been fairly limited. This thesis sets out the approach of the National and Local Government Officers Association (NALGO), the largest solely white collar union in the world with over three quarters of a million members employed in a wide range of public service industries. The thesis examines NALGO's response at national level and, through detailed case studies, at local level in respect of Local Government and Water Industry NALGO members. The response is then evaluated and conclusions drawn in terms of a framework based upon an assessment of the key factors relevant in judging the ability of NALGO to respond effectively to the challenges brought about by the technological revolution of the last ten years.

Approaches to issues of job regulation. A study at branch level in a white collar, public sector trade union. Available in 2 volumes.

This study examines the internal dynamics of white collar trade union branches in the public sector. The effects of a number of internal and external factors on branch patterns of action are evaluated. For the purposes of the study branch action is taken to be the approach to issues of job regulation, as expressed along the five dimensions of dependence on the outside trade union, focus in issues adopted, initiation of issues, intensity of action in issue pursuit and representativeness. The setting chosen for the study is four branches drawn from the same geographical area of the National and Local Government Officers Association. Branches were selected to give a variety in industry settings while controlling for the potentially influential variables of branch size, density of trade union membership and possession of exclusive representational rights in the employing organisation. Identical methods of data collection were used for each branch. The principal findings of the study are that the framework of national agreements and industry collective bargaining structures are strongly related to the industrial relations climate in the employing organisation and the structures of representation within the branch. Where agreements and collective bargaining structures formally restrict branch job regulation roles, there is a degree of devolution of bargaining authority from branch level negotiators to autonomous shop stewards at workplace level. In these circumstances industrial relations climate is characterised by a degree of informality in relationships between management and trade union activists. In turn, industrial relations climate and representative structures together with actor attitudes, have strong effects on all dimensions of approach to issues of job regulation.

A heat metering system for energy management on an industrial site

Faced with a future of rising energy costs there is a need for industry to manage energy more carefully in order to meet its economic objectives. A problem besetting the growth of energy conservation in the UK is that a large proportion of energy consumption is used in a low intensive manner in organisations where they would be responsibility for energy efficiency is spread over a large number of personnel who each see only small energy costs. In relation to this problem in the non-energy intensive industrial sector, an application of an energy management technique known as monitoring and targeting (M & T) has been installed at the Whetstone site of the General Electric Company Limited in an attempt to prove it as a means for motivating line management and personnel to save energy. The objective energy saving for which the M & T was devised is very specific. During early energy conservation work at the site there had been a change from continuous to intermittent heating but the maintenance of the strategy was receiving a poor level of commitment from line management and performance was some 5% - 10% less than expected. The M & T is concerned therefore with heat for space heating for which a heat metering system was required. Metering of the site high pressure hot water system posed technical difficulties and expenditure was also limited. This led to a ‘tin-house' design being installed for a price less than the commercial equivalent. The timespan of work to achieve an operational heat metering system was 3 years which meant that energy saving results from the scheme were not observed during the study. If successful the replication potential is the larger non energy intensive sites from which some 30 PT savings could be expected in the UK.

Drying processess in the United Kingdom:assessment of industrial energy utilisation and efficiency of drying systems and the modelling of drying characters using neural networks (BL)

Drying is an important unit operation in process industry. Results have suggested that the energy used for drying has increased from 12% in 1978 to 18% of the total energy used in 1990. A literature survey of previous studies regarding overall drying energy consumption has demonstrated that there is little continuity of methods and energy trends could not be established. In the ceramics, timber and paper industrial sectors specific energy consumption and energy trends have been investigated by auditing drying equipment. Ceramic products examined have included tableware, tiles, sanitaryware, electrical ceramics, plasterboard, refractories, bricks and abrasives. Data from industry has shown that drying energy has not varied significantly in the ceramics sector over the last decade, representing about 31% of the total energy consumed. Information from the timber industry has established that radical changes have occurred over the last 20 years, both in terms of equipment and energy utilisation. The energy efficiency of hardwood drying has improved by 15% since the 1970s, although no significant savings have been realised for softwood. A survey estimating the energy efficiency and operating characteristics of 192 paper dryer sections has been conducted. Drying energy was found to increase to nearly 60% of the total energy used in the early 1980s, but has fallen over the last decade, representing 23% of the total in 1993. These results have demonstrated that effective energy saving measures, such as improved pressing and heat recovery, have been successfully implemented since the 1970s. Artificial neural networks have successfully been applied to model process characteristics of microwave and convective drying of paper coated gypsum cove. Parameters modelled have included product moisture loss, core gypsum temperature and quality factors relating to paper burning and bubbling defects. Evaluation of thermal and dielectric properties have highlighted gypsum's heat sensitive characteristics in convective and electromagnetic regimes. Modelling experimental data has shown that the networks were capable of simulating drying process characteristics to a high degree of accuracy. Product weight and temperature were predicted to within 0.5% and 5C of the target data respectively. Furthermore, it was demonstrated that the underlying properties of the data could be predicted through a high level of input noise.

Industrial districts, inward foreign investment and regional development

This article compares the importance of agglomerations of local firms, and inward FDI as drivers of regional development. The empirical analysis exploits a unique panel dataset of the Italian manufacturing sector at the regional and industry levels. We explore whether FDI and firm agglomeration can be drivers of total factor productivity (separately and jointly), with this effect being robust to different estimators, and different assumptions about inter-regional effects. In particular, we isolate one form of firm agglomeration that is especially relevant in the Italian context, industrial districts, in order to ascertain their impact on productivity. In so doing, we distinguish standard agglomeration and localization economies from industrial districts to understand what additional impact the latter has on standard agglomeration effects. Interaction effects between FDI spillovers and different types of agglomeration economies shed some light on the heterogeneity of regional development patterns as well as on the opportunity to fine tune policy measures to specific regional contexts.

Uses of frontier efficiency methodologies and multi-criteria decision making for performance measurement in the energy sector

Guest editorial Ali Emrouznejad is a Senior Lecturer at the Aston Business School in Birmingham, UK. His areas of research interest include performance measurement and management, efficiency and productivity analysis as well as data mining. He has published widely in various international journals. He is an Associate Editor of IMA Journal of Management Mathematics and Guest Editor to several special issues of journals including Journal of Operational Research Society, Annals of Operations Research, Journal of Medical Systems, and International Journal of Energy Management Sector. He is in the editorial board of several international journals and co-founder of Performance Improvement Management Software. William Ho is a Senior Lecturer at the Aston University Business School. Before joining Aston in 2005, he had worked as a Research Associate in the Department of Industrial and Systems Engineering at the Hong Kong Polytechnic University. His research interests include supply chain management, production and operations management, and operations research. He has published extensively in various international journals like Computers & Operations Research, Engineering Applications of Artificial Intelligence, European Journal of Operational Research, Expert Systems with Applications, International Journal of Production Economics, International Journal of Production Research, Supply Chain Management: An International Journal, and so on. His first authored book was published in 2006. He is an Editorial Board member of the International Journal of Advanced Manufacturing Technology and an Associate Editor of the OR Insight Journal. Currently, he is a Scholar of the Advanced Institute of Management Research. Uses of frontier efficiency methodologies and multi-criteria decision making for performance measurement in the energy sector This special issue aims to focus on holistic, applied research on performance measurement in energy sector management and for publication of relevant applied research to bridge the gap between industry and academia. After a rigorous refereeing process, seven papers were included in this special issue. The volume opens with five data envelopment analysis (DEA)-based papers. Wu et al. apply the DEA-based Malmquist index to evaluate the changes in relative efficiency and the total factor productivity of coal-fired electricity generation of 30 Chinese administrative regions from 1999 to 2007. Factors considered in the model include fuel consumption, labor, capital, sulphur dioxide emissions, and electricity generated. The authors reveal that the east provinces were relatively and technically more efficient, whereas the west provinces had the highest growth rate in the period studied. Ioannis E. Tsolas applies the DEA approach to assess the performance of Greek fossil fuel-fired power stations taking undesirable outputs into consideration, such as carbon dioxide and sulphur dioxide emissions. In addition, the bootstrapping approach is deployed to address the uncertainty surrounding DEA point estimates, and provide bias-corrected estimations and confidence intervals for the point estimates. The author revealed from the sample that the non-lignite-fired stations are on an average more efficient than the lignite-fired stations. Maethee Mekaroonreung and Andrew L. Johnson compare the relative performance of three DEA-based measures, which estimate production frontiers and evaluate the relative efficiency of 113 US petroleum refineries while considering undesirable outputs. Three inputs (capital, energy consumption, and crude oil consumption), two desirable outputs (gasoline and distillate generation), and an undesirable output (toxic release) are considered in the DEA models. The authors discover that refineries in the Rocky Mountain region performed the best, and about 60 percent of oil refineries in the sample could improve their efficiencies further. H. Omrani, A. Azadeh, S. F. Ghaderi, and S. Abdollahzadeh presented an integrated approach, combining DEA, corrected ordinary least squares (COLS), and principal component analysis (PCA) methods, to calculate the relative efficiency scores of 26 Iranian electricity distribution units from 2003 to 2006. Specifically, both DEA and COLS are used to check three internal consistency conditions, whereas PCA is used to verify and validate the final ranking results of either DEA (consistency) or DEA-COLS (non-consistency). Three inputs (network length, transformer capacity, and number of employees) and two outputs (number of customers and total electricity sales) are considered in the model. Virendra Ajodhia applied three DEA-based models to evaluate the relative performance of 20 electricity distribution firms from the UK and the Netherlands. The first model is a traditional DEA model for analyzing cost-only efficiency. The second model includes (inverse) quality by modelling total customer minutes lost as an input data. The third model is based on the idea of using total social costs, including the firm’s private costs and the interruption costs incurred by consumers, as an input. Both energy-delivered and number of consumers are treated as the outputs in the models. After five DEA papers, Stelios Grafakos, Alexandros Flamos, Vlasis Oikonomou, and D. Zevgolis presented a multiple criteria analysis weighting approach to evaluate the energy and climate policy. The proposed approach is akin to the analytic hierarchy process, which consists of pairwise comparisons, consistency verification, and criteria prioritization. In the approach, stakeholders and experts in the energy policy field are incorporated in the evaluation process by providing an interactive mean with verbal, numerical, and visual representation of their preferences. A total of 14 evaluation criteria were considered and classified into four objectives, such as climate change mitigation, energy effectiveness, socioeconomic, and competitiveness and technology. Finally, Borge Hess applied the stochastic frontier analysis approach to analyze the impact of various business strategies, including acquisition, holding structures, and joint ventures, on a firm’s efficiency within a sample of 47 natural gas transmission pipelines in the USA from 1996 to 2005. The author finds that there were no significant changes in the firm’s efficiency by an acquisition, and there is a weak evidence for efficiency improvements caused by the new shareholder. Besides, the author discovers that parent companies appear not to influence a subsidiary’s efficiency positively. In addition, the analysis shows a negative impact of a joint venture on technical efficiency of the pipeline company. To conclude, we are grateful to all the authors for their contribution, and all the reviewers for their constructive comments, which made this special issue possible. We hope that this issue would contribute significantly to performance improvement of the energy sector.

Reshoring:opportunities and limits for manufacturing in the UK - the case of the auto sector

In recent years, offshoring and outsourcing have transformed fundamentally nationally based auto sectors into global networks of design, production and distribution across the global value chains coordinated by the major automotive Original Equipment Manufacturers (OEMs). As manufacturing activities tended to be shifted to low-labour cost locations in Asia, Africa and Latin America, high-end design, R&D, product development have stayed anchored mostly to high-cost and high knowledge-intensive home economy locations (perhaps with the except of some design and styling activities which are often located in major end markets around the world. However, very recently the weaknesses of and risks inherent in such global value chains (GVCs) have been exposed, triggering attempts to rethink their nature and also raising possibilities to reshore some manufacturing activities to home countries. A combination of a more competitive exchange rate (despite the very recent appreciation of sterling), increased transport costs, rising wages in key areas of China, and a greater awareness of supply chain resilience have all contributed to a perceived change in some business fundamentals. The potential for some supply chain relocalisation also links in with the servitisation of manufacturing including the auto sector and shift to a hybrid model where manufacturing and services are increasingly intertwined. However, there are limits as to how far this can go and these raise some important questions and issues over the possible role for industrial policy.

What next for unions in Central and Eastern Europe? Invisibility, departure and the transformation of industrial relations

This article examines union revitalization in Central and Eastern Europe, focusing on two countries: Hungary and Latvia. Trade unions have not only had to cope with a declining membership base, but have also had to respond to austerity programmes and government cuts in public sector employment. We argue that the inability of unions to provide a strong voice for alternative policies to the current neoliberal orthodoxy has been driven by a declining membership base, but also by weakened social dialogue mechanisms, limited industrial representation and an ageing membership profile, exacerbated by net outward migration in recent years. However, we find that unions in Latvia and Hungary have responded differently to these issues.