Development of science and technology policy for Kuwait

The status of Science and Technology in KUWAIT has been analysed in order to assess the extent of the application of Science and Technology needed for the Country's development. The design and implementation of a Science and Technology Policy has been examined to identify the appropriate technology necessary to improve KUWAIT's socio-economic-industrial structures. Following a general and critical review of the role of Science and Technology in the developing countries, the author has reviewed the past and contemporary employment of Science and Technology for development.of various sectors and the existence, if any, of any form (explicit, implicit, or both) of a Science and Technology Policy in KUWAIT. The thesis is structured to evaluate almost all of the sectors in KUWAIT which utilise Science and/or Technology, the effectiveness of such practices, their policymaking process, the channels by which policies were transformed into sources of influence through Governmental action and the impact that various policy instruments at the disposal of the the Government had on the development of S & T capabilities. The author has studied the implications of the absence of a Science and Technology Policy in Kuwait by examining some specific case studies, eg, the absence of a Technology Assessment Process and the negative impacts resulting from this; the ad-hoc allocation of the research and development budget instead of its being based on a percentage of GNP; the limitations imposed on the development of indigenous contracting companies and consultancy and engineering design offices; the impacts of the absence of Technology Transfer Centre, and so forth. As a consequence of the implications of the above studies, together with the negative results from the absence of an explicit Science and Technology Policy, eg, research and development activities do not relate to the national development plans, the author suggests that a Science and Technology Policy-Making Body should be established to formulate, develop, monitor and correlate the Science and Technology Activities in KUWAIT.

The role of science in policy making

This thesis aims to consider the role played by science in policy making. Firstly, two decision models are considered, synoptic rationality which depends heavily on formal information and comprehensive planning, and disjointed incrementalism, under which decisions are made in a fragmented and remedial manner via the interaction of interested partisans and with little necessity for formal information. Secondly, different descriptions of scientific activity are discussed and a broadly Kuhnian view of science is supported, with what is regarded as a `fact' being heavily influenced by social factors. It is suggested that scientific controversies are more likely to occur in policy related science but for reasons that are intrinsic to science rather than due to some correctable aberration. A number of case studies, including two `in-depth' studies into maternal deprivation and the relationship between hyperactivity and food additives, support this contention and also show that whilst scientific findings can raise issues they cannot aid in the resolution of these as the synoptic model suggests that they should. Instead information supports and legitimates value based policy views, with actual policy decisions arrived at via negotiation and aiming at a balancing of partisan pressures, as suggested by the incremental model. Not only does information not aid the resolution of policy disputes, it cannot do so. When policy is disputed, scientific findings are also likely to be disputed and further research merely attracts more highly destructive criticism. This is termed the over critical model. When policy is decided then there is reduced impetus to critically test scientific ideas; this is termed the under critical model. Both of these situations act to the detriment of science. The main conclusion drawn is that the belief that science is essential to decision making is misleading and may serve to mask rather than illuminate areas of dispute.

An investigation into the nature and consequences of teachers' implicit philosophies of science

The aims of this study were to investigate the beliefs concerning the philosophy of science held by practising science teachers and to relate those beliefs to their pupils' understanding of the philosophy of science. Three philosophies of science, differing in the way they relate experimental work to other parts of the scientific enterprise, are described. By the use of questionnaire techniques, teachers of four extreme types were identified. These are: the H type or hypothetico-deductivist teacher, who sees experiments as potential falsifiers of hypotheses or of logical deductions from them; the I type or inductivist teacher, who regards experiments mainly as a way of increasing the range of observations available for recording before patterns are noted and inductive generalisation is carried out; the V type or verificationist teacher, who expects experiments to provide proof and to demonstrate the truth or accuracy of scientific statements; and the 0 type, who has no discernible philosophical beliefs about the nature of science or its methodology. Following interviews of selected teachers to check their responses to the questionnaire and to determine their normal teaching methods, an experiment was organised in which parallel groups were given H, I and V type teaching in the normal school situation during most of one academic year. Using pre-test and post-test scores on a specially developed test of pupil understanding of the philosophy of science, it was shown that pupils were positively affected by their teacher's implied philosophy of science. There was also some indication that V type teaching improved marks obtained in school science examinations, but appeared to discourage the more able from continuing the study of science. Effects were also noted on vocabulary used by pupils to describe scientists and their activities.

The definition, theoretical modelling and empirical research of front-line service employee corporate identity within a UK national grocery retailer:determining the FLE corporate brand identification construct

Over the past forty years the corporate identity literature has developed to a point of maturity where it currently contains many definitions and models of the corporate identity construct at the organisational level. The literature has evolved by developing models of corporate identity or in considering corporate identity in relation to new and developing themes, e.g. corporate social responsibility. It has evolved into a multidisciplinary domain recently incorporating constructs from other literature to further its development. However, the literature has a number of limitations. It remains that an overarching and universally accepted definition of corporate identity is elusive, potentially leaving the construct with a lack of clear definition. Only a few corporate identity definitions and models, at the corporate level, have been empirically tested. The corporate identity construct is overwhelmingly defined and theoretically constructed at the corporate level, leaving the literature without a detailed understanding of its influence at an individual stakeholder level. Front-line service employees (FLEs), form a component in a number of corporate identity models developed at the organisational level. FLEs deliver the services of an organisation to its customers, as well as represent the organisation by communicating and transporting its core defining characteristics to customers through continual customer contact and interaction. This person-to-person contact between an FLE and the customer is termed a service encounter, where service encounters influence a customer’s perception of both the service delivered and the associated level of service quality. Therefore this study for the first time defines, theoretically models and empirically tests corporate identity at the individual FLE level, termed FLE corporate identity. The study uses the services marketing literature to characterise an FLE’s operating environment, arriving at five potential dimensions to the FLE corporate identity construct. These are scrutinised against existing corporate identity definitions and models to arrive at a definition for the construct. In reviewing the corporate identity, services marketing, branding and organisational psychology literature, a theoretical model is developed for FLE corporate identity, which is empirically and quantitatively tested, with FLEs in seven stores of a major national retailer. Following rigorous construct reliability and validity testing, the 601 usable responses are used to estimate a confirmatory factor analysis and structural equation model for the study. The results for the individual hypotheses and the structural model are very encouraging, as they fit the data well and support a definition of FLE corporate identity. This study makes contributions to the branding, services marketing and organisational psychology literature, but its principal contribution is to extend the corporate identity literature into a new area of discourse and research, that of FLE corporate identity

Submission for the degree of Doctor of Science in the University of Aston in Birmingham

DUE TO COPYRIGHT RESTRICTIONS ONLY AVAILABLE FOR CONSULTATION AT ASTON UNIVERSITY LIBRARY AND INFORMATION SERVICES WITH PRIOR ARRANGEMENT

Submission for the degree of Doctor of Science

DUE TO COPYRIGHT RESTRICTIONS ONLY AVAILABLE FOR CONSULTATION AT ASTON UNIVERSITY LIBRARY AND INFORMATION SERVICES WITH PRIOR ARRANGEMENT

Submission for the degree of Doctor of Science

DUE TO COPYRIGHT RESTRICTIONS ONLY AVAILABLE FOR CONSULTATION AT ASTON UNIVERSITY LIBRARY AND INFORMATION SERVICES WITH PRIOR ARRANGEMENT

Thesis submitted for the degree of Doctor of Science. Book by G.F.A Harding; P.M. Jeavons, Photosensitive Epilepsy also included.

DUE TO COPYRIGHT RESTRICTIONS ONLY AVAILABLE FOR CONSULTATION AT ASTON UNIVERSITY LIBRARY AND INFORMATION SERVICES WITH PRIOR ARRANGEMENT

Submission for the degree of Doctor of Science at Aston University

DUE TO COPYRIGHT RESTRICTIONS ONLY AVAILABLE FOR CONSULTATION AT ASTON UNIVERSITY LIBRARY AND INFORMATION SERVICES WITH PRIOR ARRANGEMENT

Submission for the degree of Doctor of Science at Aston University

DUE TO COPYRIGHT RESTRICTIONS ONLY AVAILABLE FOR CONSULTATION AT ASTON UNIVERSITY LIBRARY AND INFORMATION SERVICES WITH PRIOR ARRANGEMENT

Bound volume of work submitted for the degree of Doctor of Science (also one book and five paper-back reports included)

DUE TO COPYRIGHT RESTRICTIONS ONLY AVAILABLE FOR CONSULTATION AT ASTON UNIVERSITY LIBRARY AND INFORMATION SERVICES WITH PRIOR ARRANGEMENT

Strategic supplier performance evaluation:a case-based action research of a UK manufacturing organisation

The main aim of this research is to demonstrate strategic supplier performance evaluation of a UK-based manufacturing organisation using an integrated analytical framework. Developing long term relationship with strategic suppliers is common in today's industry. However, monitoring suppliers' performance all through the contractual period is important in order to ensure overall supply chain performance. Therefore, client organisations need to measure suppliers' performance dynamically and inform them on improvement measures. Although there are many studies introducing innovative supplier performance evaluation frameworks and empirical researches on identifying criteria for supplier evaluation, little has been reported on detailed application of strategic supplier performance evaluation and its implication on overall performance of organisation. Additionally, majority of the prior studies emphasise on lagging factors (quality, delivery schedule and value/cost) for supplier selection and evaluation. This research proposes both leading (organisational practices, risk management, environmental and social practices) and lagging factors for supplier evaluation and demonstrates a systematic method for identifying those factors with the involvement of relevant stakeholders and process mapping. The contribution of this article is a real-life case-based action research utilising an integrated analytical model that combines quality function deployment and the analytic hierarchy process method for suppliers' performance evaluation. The effectiveness of the method has been demonstrated through number of validations (e.g. focus group, business results, and statistical analysis). Additionally, the study reveals that enhanced supplier performance results positive impact on operational and business performance of client organisation.

The reality of cross-disciplinary energy research in the United Kingdom:a social science perspective

Cross-disciplinary research is essential in understanding and reducing energy usage, however the reality of this collaboration comes with many challenges. This paper provides an insight into the integration of social science in energy research, drawing on the expertise and first hand experiences of a range of social science researchers (predominantly Early Career Researchers (ECRs)) working on UK cross-disciplinary projects in energy demand. These researchers, participants in a workshop dedicated to understanding the integration of social science in energy research, identified four groups of challenges to successful integration: Differing expectations of the role of social scientists; Working within academia; Feeling like a valued member of the team; and Communicating and comprehension between disciplines. Suggestions of how to negotiate those challenges included: Management and planning; Increasing contact; Sharing experience; and Understanding team roles. The paper offers a definition of ‘success’ in cross-disciplinary energy research from the perspective of social science ECRs, comprising external, internal and personal components. Using the logics of interdisciplinarity, this paper suggests that integration of the social sciences in the projects discussed may be partial at best and highlights a need to recognise the challenges ECRs face, in order to achieve full integration and equality of disciplines.

The politics of knowledge in central Asia:science between Marx and the market

Through careful historical and ethnographic research and extensive use of local scholarly works, this book provides a persuasive and careful analysis of the production of knowledge in Central Asia. The author demonstrates that classical theories of science and society are inadequate for understanding the science project in Central Asia. Instead, a critical understanding of local science is more appropriate. In the region, the professional and political ethos of Marxism-Leninism was incorporated into the logic of science on the periphery of the Soviet empire. This book reveals that science, organizes and constructed by Soviet rule, was also defined by individual efforts of local scientists. Their work to establish themselves 'between Marx and the market' is therefore creating new political economies of knowledge at the edge of the scientific world system.

Insect pest control research : the analysis of historical trends with special reference to scientometric analysis

The thesis investigates the value of quantitative analyses for historical studies of science through an examination of research trends in insect pest control, or economic entomology. Reviews are made of quantitative studies of science, and historical studies of pest control. The methodological strengths and weaknesses of bibliometric techniques are examined in a special chapter; techniques examined include productivity studies such as paper counts, and relational techniques such as co-citation and co-word analysis. Insect pest control is described. This includes a discussion of the socio-economic basis of the concept of `pest'; a series of classifications of pest control techniques are provided and analysed with respect to their utility for scientometric studies. The chemical and biological approaches to control are discussed as scientific and technological paradigms. Three case studies of research trends in economic entomology are provided. First a scientometric analysis of samples of chemical control and biological control papers; providing quantitative data on institutional, financial, national, and journal structures associated with pest control research fields. Second, a content analysis of a core journal, the Journal of Economic Entomology, over a period of 1910-1985; this identifies the main research innovations and trends, in particular the changing balance between chemical and biological control. Third, an analysis of historical research trends in insecticide research; this shows the rise, maturity and decline of research of many groups of compounds. These are supplemented by a collection of seven papers on scientometric studies of pest control and quantitative techniques for analysing science.