The sociolinguistic stratification of a connected speech process - The case of the T to R rule in the Black Country

This paper examines the connected speech process described by Wells (1982b) as the T to R rule in the West Midlands speech variety associated with the Black Country. The T to R rule is well known as a linguistic marker of local varieties of the middle and far north of England. Less well understood is its position in the phonological systems of Midlands varieties. Varieties of the Midlands of England are underresearched in comparison with varieties of the north, and what is known about the application of the T to R rule in this transitional dialect area is correspondingly nebulous. This paper focuses on the Black Country area, and examines the possible outputs in the contexts which give rise to /t/ becoming [?] in local varieties of the north. I examine the written and spoken evidence which suggests that the T to R rule does indeed operate in the Black Country variety. My analysis focuses on possible phonetic outcomes of the T to R rule across time. In my conclusion, I discuss briefly the possibility that, lying on a bundle of isoglosses separating north from south, the variety of the Black Country reflects this in that a T to [?] rule, rather than a T to R rule, is the dominant output of this connected speech process in the Black Country.

An account of the sustainable development process in Bangladesh

With the accelerating industrialization process, even further increasing population and mass deforestation, ‘sustainability’ as a concept has only recently been popularized in Bangladesh. This paper sheds light on the sustainable development process in Bangladesh. It points out the major challenges to this process and identifies the motivating factors for a sustainable society in Bangladesh. The paper concludes with some strategies that are considered essential for the development of a sustainable society in Bangladesh, e.g., strong and effective regulatory framework, emphasis on rural entrepreneurship, development of indigenous technology and an integrated environmental management system.

Application of analytic hierarchy process for measuring and comparing the global performance of intensive care units

Purpose: To develop a model for the global performance measurement of intensive care units (ICUs) and to apply that model to compare the services for quality improvement. Materials and Methods: Analytic hierarchy process, a multiple-attribute decision-making technique, is used in this study to evolve such a model. The steps consisted of identifying the critical success factors for the best performance of an ICU, identifying subfactors that influence the critical factors, comparing them pairwise, deriving their relative importance and ratings, and calculating the cumulative performance according to the attributes of a given ICU. Every step in the model was derived by group discussions, brainstorming, and consensus among intensivists. Results: The model was applied to 3 ICUs, 1 each in Barbados, Trinidad, and India in tertiary care teaching hospitals of similar setting. The cumulative performance rating of the Barbados ICU was 1.17 when compared with that of Trinidad and Indian ICU, which were 0.82 and 0.75, respectively, showing that the Trinidad and Indian ICUs performed 70% and 64% with respect to Barbados ICU. The model also enabled identifying specific areas where the ICUs did not perform well, which helped to improvise those areas. Conclusions: Analytic hierarchy process is a very useful model to measure the global performance of an ICU. © 2005 Elsevier Inc. All rights reserved.

What does endogenous growth theory tell about regional economies? Empirics of R&D worker-based productivity growth

What does endogenous growth theory tell about regional economies? Empirics of R&D worker-based productivity growth, Regional Studies. Endogenous growth theory emerged in the 1990s as ‘new growth theory’ accounting for technical progress in the growth process. This paper examines the role of research and development (R&D) workers underlying the Romer model (1990) and its subsequent modifications, and compares it with a model based on the accumulation of human capital engaged in R&D. Cross-section estimates of the models against productivity growth of European regions in the 1990s suggest that each R&D worker has a unique set of knowledge while his/her contributions are enhanced by knowledge sharing within a region as well as spillovers from other regions in proximity.

Does the balanced scorecard make a difference to the strategy development process?

A great number of strategy tools are being taught in strategic management modules. These tools are available to managers for use in facilitating strategic decision-making and enhancing the strategy development process in their organisations. A number of studies have been published examining which are the most popular tools; however there is little empirical evidence on how their utilisation influences the strategy process. This paper is based on a large scale international survey on the strategy development process, and seeks to examine the impact of a particular strategy tool, the Balanced Scorecard, upon the strategy process. The Balanced Scorecard is one of the most popular strategy tools whose use has evolved since its introduction in the 1990’s. Recently, it has been suggested that as a strategy tool, Balanced Scorecard can influence all elements of the strategy process. The results of this study indicate that although there are significant differences in some elements of the strategy process between the organisations that have implemented the Balanced Scorecard and those that have not, the impact is not comprehensive.

Controlling particle size in the Stöber process and incorporation of calcium

The Stӧber process is commonly used for synthesising spherical silica particles. This article reports the first comprehensive study of how the process variables can be used to obtain monodispersed particles of specific size. The modal particle size could be selected within in the range 20 – 500 nm. There is great therapeutic potential for bioactive glass nanoparticles, as they can be internalised within cells and perform sustained delivery of active ions. Biodegradable bioactive glass nanoparticles are also used in nanocomposites. Modification of the Stӧber process so that the particles can contain cations such as calcium, while maintaining monodispersity, is desirable. Here, while calcium incorporation is achieved, with a homogenous distribution, careful characterisation shows that much of the calcium is not incorporated. A maximum of 10 mol% CaO can be achieved and previous reports are likely to have overestimated the amount of calcium incorporated.

A projected process kriging algorithm for sensor networks with heterogeneous error characteristics

Large monitoring networks are becoming increasingly common and can generate large datasets from thousands to millions of observations in size, often with high temporal resolution. Processing large datasets using traditional geostatistical methods is prohibitively slow and in real world applications different types of sensor can be found across a monitoring network. Heterogeneities in the error characteristics of different sensors, both in terms of distribution and magnitude, presents problems for generating coherent maps. An assumption in traditional geostatistics is that observations are made directly of the underlying process being studied and that the observations are contaminated with Gaussian errors. Under this assumption, sub–optimal predictions will be obtained if the error characteristics of the sensor are effectively non–Gaussian. One method, model based geostatistics, assumes that a Gaussian process prior is imposed over the (latent) process being studied and that the sensor model forms part of the likelihood term. One problem with this type of approach is that the corresponding posterior distribution will be non–Gaussian and computationally demanding as Monte Carlo methods have to be used. An extension of a sequential, approximate Bayesian inference method enables observations with arbitrary likelihoods to be treated, in a projected process kriging framework which is less computationally intensive. The approach is illustrated using a simulated dataset with a range of sensor models and error characteristics.

The mathematical modelling of the environmental performance of buildings as an aid in the design process

This thesis is a theoretical study of the accuracy and usability of models that attempt to represent the environmental control system of buildings in order to improve environmental design. These models have evolved from crude representations of a building and its environment through to an accurate representation of the dynamic characteristics of the environmental stimuli on buildings. Each generation of models has had its own particular influence on built form. This thesis analyses the theory, structure and data of such models in terms of their accuracy of simulation and therefore their validity in influencing built form. The models are also analysed in terms of their compatability with the design process and hence their ability to aid designers. The conclusions are that such models are unlikely to improve environmental performance since: a the models can only be applied to a limited number of building types, b they can only be applied to a restricted number of the characteristics of a design, c they can only be employed after many major environmental decisions have been made, d the data used in models is inadequate and unrepresentative, e models do not account for occupant interaction in environmental control. It is argued that further improvements in the accuracy of simulation of environmental control will not significantly improve environmental design. This is based on the premise that strategic environmental decisions are made at the conceptual stages of design whereas models influence the detailed stages of design. It is hypothesised that if models are to improve environmental design it must be through the analysis of building typologies which provides a method of feedback between models and the conceptual stages of design. Field studies are presented to describe a method by which typologies can be analysed and a theoretical framework is described which provides a basis for further research into the implications of the morphology of buildings on environmental design.

Strategic planning in a decentralised industrial group : a process-action study

The research was carried out within a major public company. It sought to implement an approach to strategic planning which accounted for organisational values as well as employing a holistic value-free analysis of the firm and its environment. To this end, an 'ecological' model of the firm was formulated. A series of value-free strategic policies for its development were generated. These policies were validated by the company's top-management.They compared favourably with their own planning outcomes. The approach appeared to be diagnostically strong but lacked sufficient depth in the context of finding realistic corrective measures. However, feedback from the company showed it to be a useful complementary process to conventional procedures, in providing an explicitly different perspective. The research empirically evaluated the company's value-systems and their influence on strategy. It introduced the idea of an organisational 'self-concept' pre-determining the acceptability of various strategies.The values and the "self-concept' of the company were identified and validated, They appeared to have considerable influence on strategy. In addition, tho company's planning process within the decentralised structure was shown to be sub-optimal. This resulted from the variety of value systems maintained by different parts of the organisation. Proposals attempting to redress this situation were ofJered and several accepted. The study was postured as process-action research and the chosen perspective could be succinctly described as a 'worm's-eye view', akin to that of many real planners operating at some distance from the decision-making body. In this way, the normal strategic functionings of the firm and any changes resulting from the researcher's intervention were observed and recorded. Recurrent difficulties of the planning process resulting from the decentralised structure were identified. The overall procedure suggested as a result of the research aimed to increase the viabiIity of planning and the efficiency of the process. It is considered to be flexible enough to be applicable in a broader context.

The application of robotics to the turbine blade encapsulation process

A survey of the existing state-of-the-art of turbine blade manufacture highlights two operations that have not been automated namely that of loading of a turbine blade into an encapsulation die, and that of removing a machined blade from the encapsulation block. The automation of blade decapsulation has not been pursued. In order to develop a system to automate the loading of an encapsulation die a prototype mechanical handling robot has been designed together with a computer controlled encapsulation die. The robot has been designed as a mechanical handling robot of cylindrical geometry, suitable for use in a circular work cell. It is the prototype for a production model to be called `The Cybermate'. The prototype robot is mechanically complete but due to unforeseen circumstances the robot control system is not available (the development of the control system did not form a part of this project), hence it has not been possible to fully test and assess the robot mechanical design. Robot loading of the encapsulation die has thus been simulated. The research work with regard to the encapsulation die has focused on the development of computer controlled, hydraulically actuated, location pins. Such pins compensate for the inherent positional inaccuracy of the loading robot and reproduce the dexterity of the human operator. Each pin comprises a miniature hydraulic cylinder, controlled by a standard bidirectional flow control valve. The precision positional control is obtained through pulsing of the valves under software control, with positional feedback from an 8-bit transducer. A test-rig comprising one hydraulic location pin together with an opposing spring loaded pin has demonstrated that such a pin arrangement can be controlled with a repeatability of +/-.00045'. In addition this test-rig has demonstrated that such a pin arrangement can be used to gauge and compensate for the dimensional error of the component held between the pins, by offsetting the pin datum positions to allow for the component error. A gauging repeatability of +/- 0.00015' was demonstrated. This work has led to the design and manufacture of an encapsulation die comprising ten such pins and the associated computer software. All aspects of the control software except blade gauging and positional data storage have been demonstrated. Work is now required to achieve the accuracy of control demonstrated by the single pin test-rig, with each of the ten pins in the encapsulation die. This would allow trials of the complete loading cycle to take place.