The mechanical properties and formability of dual-phase steel

In recent years dual phase steels comprising of 5-20% martensite in a ferrite matrix have come into the limelight of high strength cold formable steels because of their potential for vehicle weight saving. They show the following features: no yield point; relatively low initial flow stress; high initial workhardening rate; well sustained work hardening. As a consequence of these characteristics, dual phase steels exhibit a better combination of strength and elongation than other HSLA steels. In this thesis, a broad view of the factors which influence their properties is presented. Mechanical properties and forming ability of a commercially available dual phase steel and an AL-Si killed steel processed to dual phase form are investigated to ascertain the effect of their microstructure on their properties. It is found that the yield phenomena are masked by the transformation induced stresses present during processing and so yield point could be recovered under suitable ageing treatment; that apart from giving the above properties dual phasing gives rise to very low strain-rate sensitivity and a low R value ~ 1; that the mechanical response under rolling conditions is not different from those under tension; that there is a danger of damage to tooling during forming operations of these steels if fracture should precede instability as a result of grain size dependent strength found for these steels. It is also found that very little deformation of the martensite islands took place during deformation except at high strains. The work-hardening and the strength levels can be controlled by either decreasing the grain size or increasing the martensite volume fraction, but it is found that increasing martensite has a detrimental effect on ductility and the ductility and fracture strength can be controlled better by refining the grain size. A remarkable effect found in the dual phase steel tested is that the compressive strength is higher than the tensile strength. The reason for this observation is not yet clear but it is suggested that it might be due to the introduction of emissary type dislocations into the ferrite lattice as a result of twins formed in the martensite during transformation from austenite. The twins are envisaged to be {111} <112> in character.

The value of innovation:the interaction of competition, R&D and IP

This paper analyses market valuations of UK companies using a new data set of their R&D and IP activities (1989–2002). In contrast to previous studies, the analysis is conducted at the sectoral-level, where the sectors are based on the technological classification originating from Pavitt [Pavitt, K., 1984. Sectoral patterns of technical change. Research Policy 13, 343–373]. The first main result is that the valuation of R&D varies substantially across these sectors. Another important result is that, on average, firms that receive only UK patents tend to have no significant market premium. In direct contrast, patenting through the European Patent Office does raise market value, as does the registration of trade marks in the UK for most sectors. To explore these variations the paper links competitive conditions with the market valuation of innovation. Using profit persistence as a measure of competitive pressure, we find that the sectors that are the most competitive have the lowest market valuation of R&D. Furthermore, within the most competitive sector (‘science based’ manufacturing), firms with larger market shares (an inverse indicator of competitive pressure) also have higher R&D valuations, as well as some positive return to UK patents. We conclude that this evidence supports Schumpeter by finding higher returns to innovation in less than fully competitive markets and contradicts Arrow [Arrow, K., 1962. Economic welfare and the allocation of resources for invention. In: Nelson, R. (Ed.), The Rate and Direction of Inventive Activity. Princeton University Press, Princeton], who argued that, with the existence of IP rights, competitive market structure provides higher incentives to innovate.

Market value, R&D and intellectual property:an empirical analysis of large Australian firms

This paper considers the value of innovation to large Australian firms. Specifically, we investigate how R&D and intellectual property activity influences the market value of firms, using a Tobin’s q approach. R&D data are available for the period 1994–96 and data on patent, trade mark and design applications for 1996. The findings suggest that R&D and patent activity are positively and significantly associated with market value. The results also suggest that private returns to R&D in Australia are low by international standards.

To what extent and in what manner do Chinese and Indian contract research organisation learn and upgrade with the unbundling the global pharmaceutical R&D value chain?

The paper applies the GVC framework to analyse the organisational and geographical reconfiguration of the global R&D function of leading US and European pharmaceutical MNCs. Though pharmaceutical MNCs have been outsourcing clinical trial activities since the mid-1990s, the outsourcing of discovery research tasks is a phenomenon of the 2000s (Ramirez 2013). Moreover, in the context of a crisis of R&D productivity and increasing pressure from shareholders, a number of US and European pharmaceutical MNCs are breaking up their R&D function in an attempt to increase flexibility and reduce risk as well as costs and are thereby restructuring the global architecture of their R&D function. This break-up, or unbundling (Sako 2006), of the R&D function is particularly interesting given the prevalence of market failure in innovation (Howells et al 2008), the non-modular nature of the R&D process in this industry (Pisano 2006) and the strategic important of this activity to the core competence and long-term competitive advantage of firms in this sector. The focus of this paper is on the outsourcing of R&D activities to Chinese and Indian independently-owned contract research organisations (CROs) and the way these firms are becoming integrated as service providers into the global R&D function (or R&D value chain) of pharmaceutical MNCs. Above all the paper is concerned with the development of capabilities of CROs from these two countries and the dynamics of upgrading in GVCs in knowledge-intensive functions. The paper therefore discusses the role of both knowledge flows within global pharmaceutical R&D value chains as well as national innovation systems on the development of capabilities of Chinese and Indian CROs. Our analysis is based on data from semi-structured interviews collected from senior R&D managers from a sample of ten US and European pharmaceutical MNCs and owners and senior R&D managers from five Chinese and five Indian CROs who are providing research services to MNCs in this industry. We discuss the emergence of R&D outsourcing in this industry and the nature and mechanisms of knowledge flows within R&D value chains. The embeddedness of CROS in the national innovation systems of their home countries is also discussed.

Collaborative enterprise governance : sustainable management of inter-firm R&D relationships in the German car industry

This research reports on the appropriate governance, i.e. design and management, of inter-firm R&D relationships in order to achieve sustainable competitive success for the whole partnership as well as its individual members. An exploratory study in the German automotive industry using inductive Grounded Theory was conducted. This involved data collection via 28 semi-structured interviews with 16 companies in order to form a set of 35 tentative propositions that have been validated via a questionnaire survey receiving 110 responses from 52 companies. The research has resulted in the consolidation of the validated propositions into a novel concept termed Collaborative Enterprise Governance. The core of the concept is a competence based contingency framework that helps decision makers in selecting the most appropriate governance strategy (i.e. sourcing strategy) for an inter-firm R&D relationship between a buyer and its supplier. Thereby, the concept does not draw on whole company-to-company connectivity. It rather conceptualises an inter-firm relationship to be composed of autonomous cross-functional units of the individual partner companies that contribute value to a particular joint R&D project via the possession of task specific competencies. The novel concept and its elements have been evaluated in a focus group with industrial experts of the German automotive industry and revealed positive effects on the sustainable competitive success of the whole partnership and the individual partner companies. However, it also showed that current practice does not apply the right mechanisms for its implementation and hence guidelines for practitioners and decision makers involved in inter-firm R&D collaboration in the automotive industry are offered on how to facilitate the implementation and usage of the Collaborative Enterprise Governance philosophy.

The innovation value chain in new technology-based firms:evidence from the U.K.

Innovation is central to the survival and growth of firms, and ultimately to the health of the economies of which they are part. A clear understanding both of the processes by which firms perform innovation and the benefits which flow from innovation in terms of productivity and growth is therefore essential. This paper demonstrates the use of a conceptual framework and modeling tool, the innovation value chain (IVC), and shows how the IVC approach helps to highlight strengths and weaknesses in the innovation performance of a key group of firms-new technology-based firms. The value of the IVC is demonstrated in showing the key interrelationships in the whole process of innovation from sourcing knowledge through product and process innovation to performance in terms of the growth and productivity outcomes of different types of innovation. The use of the IVC highlights key complementarities, such as that between internal R&D, external R&D, and other external sources of knowledge. Other important relationships are also highlighted. Skill resources matter throughout the IVC, being positively associated with external knowledge linkages and innovation success, and also having a direct influence on growth independent of the effect on innovation. A key benefit of the IVC approach is therefore its ability to highlight the roles of different factors at various stages of the knowledge-innovation-performance nexus, and to show their indirect as well as direct impact. This in turn permits both managerial and policy implications to be drawn. © 2012 Product Development & Management Association.

The value of time in least developed countries:the African studies : final report

This is a report on a study designed to test the applicability of conventional Stated Preference and Revealed Preference models for valuing the time savings of rural travellers in least developed countries and to develop and demonstrate a robust methodology for estimating values of travel time savings which could be used in developing countries.

The innovation value chain and export performance:a study of Taiwanese manufacturing industries

This thesis involves the secondary data of 1806 innovative manufacturing firms derived from the database of 2nd Taiwanese Innovation Survey. Three topics are researched. The first topic investigates the innovation value chain (IVC) in Taiwanese manufacturing firms. Previous IVC studies are all done in developed countries such as UK, Ireland, Northern Ireland and Switzerland, and it leaves the gap of those non-developed countries. The result shows the overall knowledge sourcing pattern of Taiwanese manufacturing firms presenting a complementary relationship which is consistent to the previous IVC studies. The main innovation input is still derived from internal R&D which suggests more utilisation of external knowledge may boost innovation outcome. Product innovation does enhance firm growth while process innovation reduces a firm’s productivity. The second topic uses the lens of IVC to investigate the difference of the innovation process from knowledge linkages to value added between high-tech and low- tech sectors. The findings indicate (1) there are significant differences in the IVC between high- and low-tech sectors, however these are defined; (2) how you define ‘sector’ matters i.e. the nature of the high-tech and low-tech differences varies depending on whether the technology definition is carried out at the industry or firm level; and (3) the high uncertainty of innovation cause the difficulty to predict firm performance especially for those firms with high intensity of innovation. The third topic investigates the innovation-exporting relationship and explores the determinants of export performance. Product innovation enhances export performance once a firm enters international markets while process innovation affects negatively on a firm’s likelihood of being an exporter. Furthermore, IP protection is found to affect directly export performance positively.

A comparative analysis of cultural value orientations of Polish and Turkish employees:implications for international human resource management

This study empirically compares and contrasts the cultural value orientations of employees from Poland and Turkey by testing the compatibility of their values in three stages through seven cultural dimensions. The first phase of the study deals with the assessment of inter-country cultural value differences; the second phase investigates the intra-country cultural dynamics between selected demographic groups; and the third phase examines the inter-country cultural differences among the selected demographic groups of employees. The research has been conducted adopting the Maznevski, DiStephano, and Nason's (1995) version of cultural perspectives questionnaire with a sample of 744 (548 Polish and 196 Turkish) respondents. The results show significant cultural differences between Poland and Turkey, a presence of cultural dynamics among certain demographic groups within the country, and a mixture of convergence and divergence in the value systems of certain demographic groups both within and between the two nation(s). The research findings convey important messages to international human resource strategists in order for them to employ an effective and rational employment policy and business negotiation approach(es) to effectively operate in these countries. It also highlights that diversity of cultural values not only requires viewing each of them through cultural dimensions at a macro-level with a cross-country reference, but also requires monitoring their dynamics at the micro-level with reference to controlled demographic groups. © 2013 Taylor & Francis.

Opportunity, fair process and relationship value:career development as a driver of proactive work behaviour

In line with recent findings from organisational justice theory, we hypothesised that employee proactive behaviour and careerist orientation is predicted by the interplay of perceived favourability of career development opportunities, the perceived fairness of the procedures used to decide them, and employee organisational commitment. Employees (N = 325) of a large financial services organisation responded to a self-completion questionnaire. As predicted, when career development opportunities were viewed unfavourably, perceived procedural justice was significantly and positively related to individual proactive behaviour and significantly and negatively related to careerist orientation but only when organisational commitment was high. It appears that high procedural justice may only 'offset' the negative effects of unfavourable career development opportunities when employees identify with, and are committed to, their organisation. Further support is presented for a relational, rather than instrumental, model of procedural justice when reflecting on employee reactions to their employers' policies and decision-making. Implications for theory and practice are discussed.

Value of glycaemic control in diabetes

Full text: Several Lancet publications have questioned the value of glycaemic control in diabetic patients. For example, in their Comment (Sept 29, p 1103),1 John Cleland and Stephen Atkin state that “Improved glycaemic control is not a surrogate for effective care of patients who have diabetes”, and Victor Montori and colleagues (p 1104)2 claim that “HbA1c loses its validity as a surrogate marker when patients have a constellation of metabolic abnormalities”. We are concerned that the reaction against “glucocentricity” in the field of diabetes has gone too far. Even the UK's National Prescribing Centre website, carrying the National Health Service logo, includes comments that undermine the value of glycaemic control. For example, referring to the United Kingdom Prospective Diabetes Study (UKPDS), this site states that “Compared with ‘conventional control’ there was no benefit from tight control of blood glucose with sulphonylureas or insulin with regard to total mortality, diabetes-related death, macrovascular outcomes or microvascular outcomes, including all the most serious ones such as blindness or kidney failure”.3 It is well established that better glycaemic control reduces long-term microvascular complications in type 1 and type 2 diabetes.4 In type 2 diabetes, the UKPDS reported that a composite microvascular endpoint (retinopathy requiring photocoagulation, vitreous haemorrhage, and fatal or non-fatal renal failure) was reduced by 25% in patients randomised to intensive glucose control (p=0·0099).4 To imply that these are not patient-relevant outcomes is to distort the evidence. Many studies have also found that improved glycaemic control reduces macrovascular complications.5 Do not be misled: glycaemic control remains a crucial component in the care of people with diabetes. The authors have received research support and undertaken ad hoc consultancies and speaker engagements for several pharmaceutical companies.

An integral equation method for a mixed initial boundary value problem for unsteady Stokes system in a doubly-connected domain

We present a novel numerical method for a mixed initial boundary value problem for the unsteady Stokes system in a planar doubly-connected domain. Using a Laguerre transformation the unsteady problem is reduced to a system of boundary value problems for the Stokes resolvent equations. Employing a modied potential approach we obtain a system of boundary integral equations with various singularities and we use a trigonometric quadrature method for their numerical solution. Numerical examples are presented showing that accurate approximations can be obtained with low computational cost.

Firm performance and investment in R&D and intellectual property

This paper analyses the relationship between innovation - proxied by Research and Development (R&D), patent and trade mark activity – and profitability in a panel of Australian firms (1995 to 1998). Special attention is given to assessing the nature of competitive conditions faced by different firms, as the nature of competition is likely to affect the returns to innovation. The hypothesis is that lower levels of competition will imply higher returns to innovation. To allow for a time lag time before any return to innovation, the market value of the firms is used as a proxy for expected future profits. The results give some support for the main hypothesis: the market’s valuation of R&D activity is higher in industries where competition is lower. However, the paper highlights the difficulty in assessing competitive conditions and finds a number of results that challenge the simple hypothesis.

A fuzzy expected value approach under generalized data envelopment analysis

Fuzzy data envelopment analysis (DEA) models emerge as another class of DEA models to account for imprecise inputs and outputs for decision making units (DMUs). Although several approaches for solving fuzzy DEA models have been developed, there are some drawbacks, ranging from the inability to provide satisfactory discrimination power to simplistic numerical examples that handles only triangular fuzzy numbers or symmetrical fuzzy numbers. To address these drawbacks, this paper proposes using the concept of expected value in generalized DEA (GDEA) model. This allows the unification of three models - fuzzy expected CCR, fuzzy expected BCC, and fuzzy expected FDH models - and the ability of these models to handle both symmetrical and asymmetrical fuzzy numbers. We also explored the role of fuzzy GDEA model as a ranking method and compared it to existing super-efficiency evaluation models. Our proposed model is always feasible, while infeasibility problems remain in certain cases under existing super-efficiency models. In order to illustrate the performance of the proposed method, it is first tested using two established numerical examples and compared with the results obtained from alternative methods. A third example on energy dependency among 23 European Union (EU) member countries is further used to validate and describe the efficacy of our approach under asymmetric fuzzy numbers.