The interaction between master production scheduling and detailed capacity requirements planning : closing the loop in manufacturing resource planning (MRPII) systems

The widespread implementation of Manufacturing Resource Planning (MRPII) systems in this country and abroad and the reported dissatisfaction with their use formed the initial basis of this piece of research which concentrates on the fundamental theory and design of the Closed Loop MRPII system itself. The dissertation concentrates on two key aspects namely; how Master Production Scheduling is carried out in differing business environments and how well the `closing of the loop' operates by checking the capcity requirements of the different levels of plans within an organisation. The main hypothesis which is tested is that in U.K. manufacturing industry, resource checks are either not being carried out satisfactorily or they are not being fed back to the appropriate plan in a timely fashion. The research methodology employed involved initial detailed investigations into Master Scheduling and capacity planning in eight diverse manufacturing companies. This was followed by a nationwide survey of users in 349 companies, a survey of all the major suppliers of Production Management software in the U.K. and an analysis of the facilities offered by current software packages. The main conclusion which is drawn is that the hypothesis is proved in the majority of companies in that only just over 50% of companies are attempting Resource and Capacity Planning and only 20% are successfully feeding back CRP information to `close the loop'. Various causative factors are put forward and remedies are suggested.

An approach to the development of expert systems within production planning and control

The thesis presents an account of an attempt to utilize expert systems within the domain of production planning and control. The use of expert systems was proposed due to the problematical nature of a particular function within British Steel Strip Products' Operations Department: the function of Order Allocation, allocating customer orders to a production week and site. Approaches to tackling problems within production planning and control are reviewed, as are the general capabilities of expert systems. The conclusions drawn are that the domain of production planning and control contains both `soft' and `hard' problems, and that while expert systems appear to be a useful technology for this domain, this usefulness has by no means yet been demonstrated. Also, it is argued that the main stream methodology for developing expert systems is unsuited for the domain. A problem-driven approach is developed and used to tackle the Order Allocation function. The resulting system, UAAMS, contained two expert components. One of these, the scheduling procedure was not fully implemented due to inadequate software. The second expert component, the product routing procedure, was untroubled by such difficulties, though it was unusable on its own; thus a second system was developed. This system, MICRO-X10, duplicated the function of X10, a complex database query routine used daily by Order Allocation. A prototype version of MICRO-X10 proved too slow to be useful but allowed implementation and maintenance issues to be analysed. In conclusion, the usefulness of the problem-driven approach to expert systems development within production planning and control is demonstrated but restrictions imposed by current expert system software are highlighted in that the abilities of such software to cope with `hard' scheduling constructs and also the slow processing speeds of such software can restrict the current usefulness of expert systems within production planning and control.

Information systems, inter-functional collaboration and innovation in Taiwanese high-tech manufacturing firms

This article investigates whether (1) cross-functional integration within a firm and the use of information systems (IS) that support information sharing with external parties can enhance integration across the supply chain and wider networks and (2) whether collaboration with customers, suppliers and other external parties leads to increased supply chain performance in terms of new product development and introduction of new processes. Data from a high-quality survey carried out in Taiwan in 2009 were used, and appropriate econometric models were applied. Results show that the adoption of IS that enhance information sharing is vital not only for the effective communication with suppliers and with wider network members, but their adoption also has a direct effect across a firm's innovative effort. Cross-functional integration appears to matter only for the introduction of an innovative process. Collaboration with customers and suppliers affected a product's design and its overall features and functionality, respectively. © 2013 Copyright Taylor and Francis Group, LLC.

An interpretive approach to analysing the role and value of information systems in Jordanian financial organisations

Analysing investments in ISs in order to maximise benefits has become a prime concern, especially for private corporations. No formula of equilibrium exists that could link the injected amounts and accrued returns. The relationship is simply not straightforward. This thesis is based upon empirical work which involved sketching organisational ethnographies (four organographies and a sectography) into the role and value of information systems in Jordanian financial organisations. Besides deciphering the map of impacts, it explains the attributions of the variations in the impacts of ISs which were found to be related to the internal organisational processes: culturally and politically specific considerations, economically or technically rooted factors and environmental factors. The research serves as an empirical attempt to test out the applicability of adopting the interpretive paradigm to researching organisations in a developing country. The fieldwork comprised an exploratory stage, a detailed investigation of four case studies and a survey stage encompassing 16 organisations. Primary and secondary data were collected from multiple sources using a range of instruments. The evidence highlights the fact that little long term strategic planning was pursued; the emphasis was more focused on short term planning. There was no noticeable adoption of any strategic fit principle linking IS strategy to the corporate strategy. In addition, the benefits obtained were mostly intangible. Although ISs were central to the work of the organisations surveyed as the core technology, they were considered as tools or work enablers rather than weapons for competitive rivalry. The cultural specificity of IS impacts was evident and the cultural and political considerations were key factors in explaining the attributions of the variations in the impacts of ISs in JFOs. The thesis confirms that measuring the benefits of ISs is the problematic. However, in order to gain more insight, the phenomenon of "the use of ISs" has to be studied within its context.

A composite framework for the strategic alignment of information systems development

Information systems are corporate resources, therefore information systems development must be aligned with corporate strategy. This thesis proposes that effective strategic alignment of information systems requires information systems development, information systems planning and strategic management to be united. Literature in these areas is examined, breaching the academic boundaries which separate these areas, to contribute a synthesised approach to the strategic alignment of information systems development. Previous work in information systems planning has extended information systems development techniques, such as data modelling, into strategic planning activities, neglecting techniques of strategic management. Examination of strategic management in this thesis, identifies parallel trends in strategic management and information systems development; the premises of the learning school of strategic management are similar to those of soft systems approaches to information systems development. It is therefore proposed that strategic management can be supported by a soft systems approach. Strategic management tools and techniques frame individual views of a strategic situation; soft systems approaches can integrate these diverse views to explore the internal and external environments of an organisation. The information derived from strategic analysis justifies the need for an information system and provides a starting point for information systems development. This is demonstrated by a composite framework which enables each information system to be justified according to its direct contribution to corporate strategy. The proposed framework was developed through action research conducted in a number of organisations of varying types. This suggests that the framework can be widely used to support the strategic alignment of information systems development, thereby contributing to organisational success.

Strategic information systems at the Colombian President's Office (1990-1992) : a managerial cybernetic approach

This research studies the issue of using strategic information technology for improving organisational effectiveness. It analyses different academic approaches explaining the nature of information systems and the need organisations feel of developing strategic information systems planning processes, to improve organisational effectiveness. It chooses Managerial Cybernetics as the theoretical foundation supporting development of a "Strategic Information Systems Planning" Framework, and uses it for supporting the analysis of a documented story about the process lived by the Colombian President's Office, in 1990-1992. It argues that by analysing the situation through this new analysis framework we may enlighten some previously unclear situations lived, and not yet properly explained through other approaches to strategic information systems planning. The documented history explains the organisational context and strategic postures of the Colombian President's Office and the Colombian Public Sector, at that time, as well as some of the strategic information systems defined and developed. In particular it analyses a system developed jointly by the President's Office and the National Planning Department, for measuring results of the main national development programmes. Then, it reviews these situations, in the light of the new framework and presents the main findings of the exercise. Finally, it analyses the whole research exercise, the perceived usefulness of the chosen frameworks and tools to enlighten the real situations analysed that were not clear enough, and some open research paths to follow for future researchers interested in the issue.

The Application of Geographic Information Systems to climate change & land evaluation : a study of the effects of climate change upon crop productivity in a sub-tropical environment

This research investigates the contribution that Geographic Information Systems (GIS) can make to the land suitability process used to determine the effects of a climate change scenario. The research is intended to redress the severe under representation of Developing countries within the literature examining the impacts of climatic change upon crop productivity. The methodology adopts some of the Intergovernmental Panel on Climate Change (IPCC) estimates for regional climate variations, based upon General Circulation Model predictions (GCMs) and applies them to a baseline climate for Bangladesh. Utilising the United Nations Food & Agricultural Organisation's Agro-ecological Zones land suitability methodology and crop yield model, the effects of the scenario upon agricultural productivity on 14 crops are determined. A Geographic Information System (IDRISI) is adopted in order to facilitate the methodology, in conjunction with a specially designed spreadsheet, used to determine the yield and suitability rating for each crop. A simple optimisation routine using the GIS is incorporated to provide an indication of the 'maximum theoretical' yield available to the country, should the most calorifically significant crops be cultivated on each land unit both before and after the climate change scenario. This routine will provide an estimate of the theoretical population supporting capacity of the country, both now and in the future, to assist with planning strategies and research. The research evaluates the utility of this alternative GIS based methodology for the land evaluation process and determines the relative changes in crop yields that may result from changes in temperature, photosynthesis and flooding hazard frequency. In summary, the combination of a GIS and a spreadsheet was successful, the yield prediction model indicates that the application of the climate change scenario will have a deleterious effect upon the yields of the study crops. Any yield reductions will have severe implications for agricultural practices. The optimisation routine suggests that the 'theoretical maximum' population supporting capacity is well in excess of current and future population figures. If this agricultural potential could be realised however, it may provide some amelioration from the effects of climate change.

A production planning system for plastic footwear in a seasonal market

Modern injection-moulding machinery which produces several, pairs of plastic footwear at a time brought increased production planning problems to a factory. The demand for its footwear is seasonal but the company's manning policy keeps a fairly constant production level thus determining the aggregate stock. Production planning must therefore be done within the limitations of a specified total stock. The thesis proposes a new production planning system with four subsystems. These are sales forecasting, resource planning, and two levels of production scheduling: (a) aggregate decisions concerning the 'manufacturing group' (group of products) to be produced in each machine each week, and (b) detailed decisions concerning the products within a manufacturing group to be scheduled into each mould-place. The detailed scheduling is least dependent on improvements elsewhere so the sub-systems were tackled in reverse order. The thesis concentrates on the production scheduling sub-systems which will provide most. of the benefits. The aggregate scheduling solution depends principally on the aggregate stocks of each manufacturing group and their division into 'safety stocks' (to prevent shortages) and 'freestocks' (to permit batch production). The problem is too complex for exact solution but a good heuristic solution, which has yet to be implemented, is provided by minimising graphically immediate plus expected future costs. The detailed problem splits into determining the optimal safety stocks and batch quantities given the appropriate aggregate stocks. It.is found that the optimal safety stocks are proportional to the demand. The ideal batch quantities are based on a modified, formula for the Economic Batch Quantity and the product schedule is created week by week using a priority system which schedules to minimise expected future costs. This algorithm performs almost optimally. The detailed scheduling solution was implemented and achieved the target savings for the whole project in favourable circumstances. Future plans include full implementation.

Metrics and models to support the development of hybrid information systems

The research described here concerns the development of metrics and models to support the development of hybrid (conventional/knowledge based) integrated systems. The thesis argues from the point that, although it is well known that estimating the cost, duration and quality of information systems is a difficult task, it is far from clear what sorts of tools and techniques would adequately support a project manager in the estimation of these properties. A literature review shows that metrics (measurements) and estimating tools have been developed for conventional systems since the 1960s while there has been very little research on metrics for knowledge based systems (KBSs). Furthermore, although there are a number of theoretical problems with many of the `classic' metrics developed for conventional systems, it also appears that the tools which such metrics can be used to develop are not widely used by project managers. A survey was carried out of large UK companies which confirmed this continuing state of affairs. Before any useful tools could be developed, therefore, it was important to find out why project managers were not using these tools already. By characterising those companies that use software cost estimating (SCE) tools against those which could but do not, it was possible to recognise the involvement of the client/customer in the process of estimation. Pursuing this point, a model of the early estimating and planning stages (the EEPS model) was developed to test exactly where estimating takes place. The EEPS model suggests that estimating could take place either before a fully-developed plan has been produced, or while this plan is being produced. If it were the former, then SCE tools would be particularly useful since there is very little other data available from which to produce an estimate. A second survey, however, indicated that project managers see estimating as being essentially the latter at which point project management tools are available to support the process. It would seem, therefore, that SCE tools are not being used because project management tools are being used instead. The issue here is not with the method of developing an estimating model or tool, but; in the way in which "an estimate" is intimately tied to an understanding of what tasks are being planned. Current SCE tools are perceived by project managers as targetting the wrong point of estimation, A model (called TABATHA) is then presented which describes how an estimating tool based on an analysis of tasks would thus fit into the planning stage. The issue of whether metrics can be usefully developed for hybrid systems (which also contain KBS components) is tested by extending a number of "classic" program size and structure metrics to a KBS language, Prolog. Measurements of lines of code, Halstead's operators/operands, McCabe's cyclomatic complexity, Henry & Kafura's data flow fan-in/out and post-release reported errors were taken for a set of 80 commercially-developed LPA Prolog programs: By re~defining the metric counts for Prolog it was found that estimates of program size and error-proneness comparable to the best conventional studies are possible. This suggests that metrics can be usefully applied to KBS languages, such as Prolog and thus, the development of metncs and models to support the development of hybrid information systems is both feasible and useful.

Benchmarking for information systems management using issues framework studies:cContent and methodology

As a means of benchmarking their position and assisting with anticipating an uncertain future, the identification of critical information systems (IS) management issues frameworks is becoming an increasingly important research task for both academics and industrialists. This paper provides a description and summary of previous work on identifying IS issues frameworks by reviewing 20 research investigations in terms of what they studied and how they were conducted. It also suggests some possible directions and methodologies for future research. The summary and suggestions for further work are applicable for issues framework research in the IS management field as well as in other business and management areas.

Developing intrinsically motivated information systems - a critical systems approach

This paper deals with the problematic of development methodologies for organisational information systems and especially with their application to business systems. Historically, information systems development methodologies tend to fail, because either they take the organisational purposefulness for granted, or they do not analyse it thoroughly. This paper's position is that the analysis, and the definition or redefinition of the systemic purpose are regarded as the utmost expression of the system 's purposefulness. This is to be achieved by ensuring the participation of all the stakeholders who affect, or are affected by, a particular business system's operations. The nature of participation, defined as a process of the stakeholders' perceptual exchanges, is deemed to be problematic in itself, due to the influence exerted upon it by organisational power, coercion and false consciousness. The paper highlights the philosophical reasons for the failures of information systems development methodologies, and provides a conceptual solution to this problematic as well as a strategy for the development of intrinsically motivated organisational information systems. The intrinsically motivated information systems methodology outlined here (BSPA) is intended to yield organisational information systems that demonstrably improve co-ordination of organisational activities, by enabling the development and maintenance of a single/multifaceted view of purpose throughout organisations.

Business information systems:technology, development and management for the e-business with Webct pin card

This is an online course pack consisting of Chaffey: Business Information Systems ISBN: 027365540X and access to a Pearson Education online course ISBN: 0273673491

Optimal production planning for PCB assembly

It is indisputable that printed circuit boards (PCBs) play a vital role in our daily lives. With the ever-increasing applications of PCBs, one of the crucial ways to increase a PCB manufacturer’s competitiveness in terms of operation efficiency is to minimize the production time so that the products can be introduced to the market sooner. Optimal Production Planning for PCB Assembly is the first book to focus on the optimization of the PCB assembly lines’ efficiency. This is done by: • integrating the component sequencing and the feeder arrangement problems together for both the pick-and-place machine and the chip shooter machine; • constructing mathematical models and developing an efficient and effective heuristic solution approach for the integrated problems for both types of placement machines, the line assignment problem, and the component allocation problem; and • developing a prototype of the PCB assembly planning system. The techniques proposed in Optimal Production Planning for PCB Assembly will enable process planners in the electronics manufacturing industry to improve the assembly line’s efficiency in their companies. Graduate students in operations research can familiarise themselves with the techniques and the applications of mathematical modeling after reading this advanced introduction to optimal production planning for PCB assembly.

To reveal is to critique:actor-network theory and critical information systems research

It has been suggested that, in order to maintain its relevance, critical research must develop a strong emphasis on empirical work rather than the conceptual emphasis that has typically characterized critical scholarship in management. A critical project of this nature is applicable in the information systems (IS) arena, which has a growing tradition of qualitative inquiry. Despite its relativist ontology, actor–network theory places a strong emphasis on empirical inquiry and this paper argues that actor–network theory, with its careful tracing and recording of heterogeneous networks, is well suited to the generation of detailed and contextual empirical knowledge about IS. The intention in this paper is to explore the relevance of IS research informed by actor–network theory in the pursuit of a broader critical research project as de? ned in earlier work.

Accounting information systems as knowledge objects:some effects of objectualization

This paper will outline a research methodology informed by theorists who have contributed to actor network theory (ANT). Research informed from such a perspective recognizes the constitutive role of accounting systems in the achievement of broader social goals. Latour, Knoor Cetina and others argue that the bringing in of non-human actants, through the growth of technology and science, has added immeasurably to the complexity of modern society. The paper ‘sees’ accounting and accounting systems as being constituted by technological ‘black boxes’ and seeks to discuss two questions. One concerns the processes which surround the establishment of ‘facts’, i.e. how ‘black boxes’ are created or accepted (even if temporarily) within society. The second concerns the role of existing ‘black boxes’ within society and organizations. Accounting systems not only promote a particular view of the activities of an organization or a subunit, but in their very implementation and operation ‘mobilize’ other organizational members in a particular direction. The implications of such an interpretation are explored in this paper. Firstly through a discussion of some of the theoretic constructs that have been proposed to frame ANT research. Secondly an attempt is made to relate some of these ideas to aspects of the empirics in a qualitative case study. The case site is in the health sector and involves the implementation of a casemix accounting system. Evidence from the case research is used to exemplify aspects of the theoretical constructs.