International technology transfer and collaborative new product development:evidence and a case from the machine tool industry

In recent years, it has become increasingly common for companies to improve their competitiveness and find new markets by extending their operations through international new product development collaborations involving technology transfer. Technology development, cost reduction and market penetration are seen as the foci in such collaborative operations with the aim being to improve the competitive position of both partners. In this paper, the case of technology transfer through collaborative new product development in the machine tool sector is used to provide a typical example of such partnerships. The paper outlines the links between the operational aspects of collaborations and their strategic objectives. It is based on empirical data collected from the machine tool industries in the UK and China. The evidence includes longitudinal case studies and questionnaire surveys of machine tool manufacturers in both countries. The specific case of BSA Tools Ltd and its Chinese partner the Changcheng Machine Tool Works is used to provide an in-depth example of the operational development of a successful collaboration. The paper concludes that a phased coordination of commercial, technical and strategic interactions between the two partners is essential for such collaborations to work.

International technology transfer:perceptions and reality of quality and reliability

Impressions about product quality and reliability can depend as much on perceptions about brands and country of origin as on data regarding performance and failure. This has implications for companies in developing countries that need to compete with importers. For manufacturers in industrialised countries it has implications for the value of transferred technologies. This article considers the issue of quality and reliability when technology is transferred between countries with different levels of development. It is based on UK and Chinese company case studies and questionnaire surveys undertaken among three company groups: UK manufacturers; Chinese manufacturers; Chinese users. Results show that all three groups recognise quality and reliability as important and support the premise that foreign technology based machines made in China carry a price premium over Chinese machines based on local technology. Closer examination reveals a number of important differences concerning the perceptions and reality of quality and reliability between the groups.

International technology collaboration for new product development

In recent years it has become increasingly common for companies to improve their competitiveness and find new markets by extending their operations through international new product development collaborations involving technology transfer. Technology development, cost reduction and market penetration are seen as the foci in such collaborative operations with the aim being to improve the competitive position of both partners. In this paper the case of technology transfer through collaborative new product development in the machine tool sector is used to provide a typical example of such partnerships. The research evidence on which the paper is based includes longitudinal case studies and questionnaire surveys of machine tool manufacturers in both countries. The specific case of a UK machine tool company and its Chinese partner is used to provide a specific example of the operational development of a successful collaboration. The paper concludes that a phased co-ordination of commercial, technical and strategic interactions between the two partners is essential for such collaborations to work. In particular, the need to transfer marketing know-how is emphasised, having been identified as an area of weakness among technology acquirers in China.

Valuing transferred machine tool technology:Relating value to product attributes and preferences of acquirers

The value of technology and the appropriate form of transfer arrangement are important questions to be resolved when transferring technology between Western manufacturing firms and partners in industrialising and developing countries. This article reports on surveys carried out in the machine tool industries in the UK and China to establish the differences and similarities between owners and acquirers of technology regarding the relative importance of the factors they evaluate, and the assessments they make, when considering a technology transfer. It also outlines the development of a framework for technology valuation. The survey results indicate that the value of product technology is related to superior technical performance, especially on reliability and functionality, and the prospects of premium prices and increased sales of the technology transfer based machine tools. Access to markets is the main objective of UK companies, while Chinese companies are concerned about improving their technological capability. There are significant risks, especially related to performance in the market, and while owners and acquirers have benefited in the short term, the long term collaboration required for strategic benefits has been difficult to achieve because of the different priorities of the owners and the acquirers.

Characterisation of a cavity transfer mixer as a chemical reactor

This research project examined the feasibility of using a cavity transfer mixer (CTM) as a continuous reactor to perform reactions between either solid or liquid reagents and polymer melt; reactions which have previously been typically carried out in batch reactor systems. Equipment has been developed to allow uniform and reproducible introduction of reagents into the polymer melt. Reactions have also been performed using batch processing equipment to enable comparison with the performance of the CTM. It was concluded that: a) there are certain reactions which cannot be carried out in a CTM, but which can be performed in a batch system such as a mill or a sigma blade mixer. This was found to be the case for some neutralisation reactions where the product was quasi crosslinked. b) the reactions that can be carried out in a CTM are performed more efficiently in a CTM than on a batch process. For example, when monomers were to be grafted onto polymers, this was more safely and efficiently performed in the CTM than in a mill or a sigma blade mixer. Residence time distributions (RTDs) for three CTMs were studied in order to gain an insight into the effect of CTM geometry on RTD, polymer melt flow pattern and reactor performance. A mathematical model has been developed to predict the influence of process parameters on RTD and the results compared with experimentally observed trends. The comparison was good. A programme of research has been drawn up to form the basis of an industrially based sponsored development project of the CTM reactor. This work programme was successfully marketed to companies with commercial interest in modified rubber and plastics as an integral part of the research programme of this thesis and the sponsored research programme has paralleled the work reported here.

International technology transfer and development of capabilities in Chinese state-owned manufacturing enterprises:lessons from 20 years of case research

Technological capabilities in Chinese manufacturing have been transformed in the last three decades. However, the extent to which domestic market oriented state owned enterprises (SOEs) have developed their capabilities is not clear. Six SOEs in the automotive, steel and machine tools sectors in Beijing and Tianjin have been studied since the mid-1990s to assess the capability levels attained and the role of external sources and internal efforts in developing them. Aided by government policies, acquisition of technology and their own efforts, the case study companies appear to be broadly following the East Asian late industrialisation model. All six enterprises demonstrate competences in operating established technology, managing investment and making product and process improvements. The evidence suggests that companies without foreign joint venture (JV) collaborations have made more progress in this respect.

Internationalization of small and medium sized UK manufacturing enterprises:technology and knowledge transfer perspective

This dissertation examines internationalisation of small and medium sized enterprises. There has been a journey to achieve this. The research has started as an action research as Teaching Company Scheme Associate. This has been done in two research cycles, which investigated factors for successful internationalisation of a small and medium sized UK manufacturing enterprise. This has revealed that successful internationalisation requires good technology and knowledge transfer to the new operations. The action research is followed by a survey that has been conducted within UK manufacturing companies. The data collected was analysed under three models: entry mode selection, role of factory and level of internationalisation. The first two models explain two major aspects of internationalisation decision. The last is showing what makes successful internationalising small and medium sized companies. These models provided several important results. The small and medium sized enterprise internationalisation is harder to achieve because most of these organisations do not have experience in technology and knowledge transfer. The success of internationalisation depends on the success of the transfer. This is achieved through employee ownership of the new knowledge. There are many factors affecting this result such as the network relationships such as trust, control and commitment and cognitive distance between two organisations. The last is a product of the difference between prior knowledge and the required level of knowledge. The entry mode and role of factory are decided through these factors while the level of internationalisation can only be explained by absorptive capacity of the recipient organisation and the technology transfer ability of the host organisation.

Technology transfer and sustainable industrial development for developing countries

This paper reports on a part of work for the UNIDO initiative on technology transfer for sustainable industrial development. The proposed technology transfer framework, adapted from the East Asian late industrialisers model, identifies two categories of countries requiring support for enhancing their technological capabilities: (a) very late industrialisers (“low income” developing countries), and (b) slow industrialisers (countries with sizeable manufacturing sectors but limited success in gaining international competitiveness) and three technology transfer routes: (a) through trade and aid to strengthen indigenous production for domestic markets (Route 1); (b) through FDI and contracting to develop export oriented firms (Route 2), and (c) through the supply chain of capital equipment and materials to develop local subcontracting capacity (Route 3). Very late industrialisers need support to start with Route 1 in selected sectors and upgrade through imported mature technologies. Appropriate product innovations are also possible. The slow industrialisers have more scope for increased technology transfer through Routes 2 and 3.

Managing supply chain knowledge in the new product development process:a social network analysis approach

The aim of this paper is to propose a conceptual framework for studying the knowledge transfer problem within the supply chain. The social network analysis (SNA) is presented as a useful tool to study knowledge networks within supply chain, to visualize knowledge flows and to identify the accumulating knowledge nodes of the networks. © 2011 IEEE.