Relationship between organisational justice and employee outcomes:a cross-national study

This study examined the influence of organizational justice perceptions on employee work outcome relationships as moderated by individual differences that are influenced by societal culture. Power distance, but not country or individualism, moderated the relationships between perceived justice and satisfaction, performance, and absenteeism. The effects of perceived justice on these outcomes were stronger among individuals scoring lower on power distance index, and most of these study participants were in the U.S. (versus Hong Kong) sample. Limitations of the study and the implications of the findings for managing cross-culturally are discussed.

An investigation into the nature, determinants, and dynamics of service quality expectations

On the basis of a review of the substantive quality and service marketing literature current knowledge regarding service quality expectations was found either absent or deficient. The phenomenon is of increasing importance to both marketing researchers and management and was therefore judged worthy of scholarly consideration. Because the service quality literature was insufficiently rich when embarking on the thesis three basic research issues were considered namely the nature, determinants, and dynamics of service quality expectations. These issues were first conceptually and then qualitatively explored. This process generated research hypotheses mainly relating to a model which were subsequently tested through a series of empirical investigations using questionnaire data from field studies in a single context. The results were internally consistent and strongly supported the main research hypotheses. It was found that service quality expectations can be meaningfully described in terms of generic/service-specific, intangible/tangible, and process/outcome categories. Service-specific quality expectations were also shown to be determined by generic service quality expectations, demographic variables, personal values, psychological needs, general service sophistication, service-specific sophistication, purchase motives, and service-specific information when treating service class involvement as an exogenous variable. Subjects who had previously not directly experienced a particular service were additionally found to revise their expectations of quality when exposed to the service with change being driven by a sub-set of identified determinants.

Imagined relationships: political leadership in contemporary democracies

The image and style of political leaders are important elements of leadership, and of politics generally. They are related to both political culture and institutions, and are framed in ritual and ceremony. In democratic policies, where there is choice rather than coercion, the mediation of leadership/people relations creates imagined relationships between imagined leaders and their equally imagined interlocutors, the people or the electorate (who also, of course, actually exist). These relationships form part of the political process. By identifying, and adapting, classical Aristotelian distinctions in rhetorical studies, we can better understand this element or moment of the process, in particular the creation of an imagined intimacy in contemporary politics between leaders and followers. Political science should draw upon other disciplines and subdisciplines such as political psychology, cultural studies, rhetorical analysis, and social anthropology in order to understand how mediated relationships are inscribed into political institutions and exchange.

Computer control of chemical process plants with special reference to distillation

A sieve plate distillation column has been constructed and interfaced to a minicomputer with the necessary instrumentation for dynamic, estimation and control studies with special bearing on low-cost and noise-free instrumentation. A dynamic simulation of the column with a binary liquid system has been compiled using deterministic models that include fluid dynamics via Brambilla's equation for tray liquid holdup calculations. The simulation predictions have been tested experimentally under steady-state and transient conditions. The simulator's predictions of the tray temperatures have shown reasonably close agreement with the measured values under steady-state conditions and in the face of a step change in the feed rate. A method of extending linear filtering theory to highly nonlinear systems with very nonlinear measurement functional relationships has been proposed and tested by simulation on binary distillation. The simulation results have proved that the proposed methodology can overcome the typical instability problems associated with the Kalman filters. Three extended Kalman filters have been formulated and tested by simulation. The filters have been used to refine a much simplified model sequentially and to estimate parameters such as the unmeasured feed composition using information from the column simulation. It is first assumed that corrupted tray composition measurements are made available to the filter and then corrupted tray temperature measurements are accessed instead. The simulation results have demonstrated the powerful capability of the Kalman filters to overcome the typical hardware problems associated with the operation of on-line analyzers in relation to distillation dynamics and control by, in effect, replacirig them. A method of implementing estimator-aided feedforward (EAFF) control schemes has been proposed and tested by simulation on binary distillation. The results have shown that the EAFF scheme provides much better control and energy conservation than the conventional feedback temperature control in the face of a sustained step change in the feed rate or multiple changes in the feed rate, composition and temperature. Further extensions of this work are recommended as regards simulation, estimation and EAFF control.

Examining a key aspect of agency-to-business relationships:the effects of regulatory control on the satisfaction of regulated firms

This paper studies an overlooked, but highly important relationship, the relationship that exists between regulatory agencies (e.g., the EPA, OSHA, and the FDA) and the for-profit businesses they attempt to govern. Drawing on business-to-business control and satisfaction research, a framework is developed to understand how regulatory control influences the satisfaction levels of customer firms. Regulatory control is disaggregated into four distinct facets: the controlling agency, the rules and regulations of control, the processes used by the agency to apply the regulations, and sanctions. Each facet is hypothesized to have an effect on satisfaction. A regulator's administration of state food safety regulations provides the empirical context for testing the hypotheses. Results from a survey of 173 restaurants provide empirical support for the conceptual model. Most importantly, the study finds that the informal control process increases customer satisfaction, while the formal control process decreases customer satisfaction. We discuss how these and other findings may contribute to more effective agency-to-business relationships and ongoing research.

Using simulation to assess the introduction of technology in a continuous operations process

Purpose – To investigate the role of simulation in the introduction of technology in a continuous operations process. Design/methodology/approach – A case-based research method was chosen with the aim to provide an exemplar of practice and test the proposition that the use of simulation can improve the implementation and running of conveyor systems in continuous process facilities. Findings – The research determines the optimum rate of re-introduction of inventory to a conveyor system generated during a breakdown event. Research limitations/implications – More case studies are required demonstrating the operational and strategic benefits that can be gained by using simulation to assess technology in organisations. Practical implications – A practical outcome of the study was the implementation of a policy for the manual re-introduction of inventory on a conveyor line after a breakdown event had occurred. Originality/value – The paper presents a novel example of the use of simulation to estimate the re-introduction rate of inventory after a breakdown event on a conveyor line. The paper highlights how by addressing this operational issue, ahead of implementation, the likelihood of the success of the strategic decision to acquire the technology can be improved.

Using process mapping and business process simulation to support a process-based approach to change in a public sector organisation

A case study demonstrates the use of a process-based approach to change regarding the implementation of an information system for road traffic accident reporting in a UK police force. The supporting tools of process mapping and business process simulation are used in the change process and assist in communicating the current process design and people's roles in the overall performance of that design. The simulation model is also used to predict the performance of new designs incorporating the use of information technology. The approach is seen to have a number of advantages in the context of a public sector organisation. These include the ability for personnel to move from a traditional grouping of staff in occupational groups with relationships defined by reporting requirements to a view of their role in a process, which delivers a performance to a customer. By running the simulation through time it is also possible to gauge how changes at an operational level can lead to the meeting of strategic targets over time. Also the ability of simulation to proof new designs was seen as particularly important in a government agency were past failures of information technology investments had contributed to a more risk averse approach to their implementation. © 2004 Elsevier Ltd. All rights reserved.

Development of a co-operative distributed process mining system for quality assurance

In this paper, a co-operative distributed process mining system (CDPMS) is developed to streamline the workflow along the supply chain in order to offer shorter delivery times, more flexibility and higher customer satisfaction with learning ability. The proposed system is equipped with the ‘distributed process mining’ feature which is used to discover the hidden relationships among each working decision in distributed manner. This method incorporates the concept of data mining and knowledge refinement into decision making process for ensuring ‘doing the right things’ within the workflow. An example of implementation is given, based on the case of slider manufacturer.

Stakeholder relationships in an international retailing context:an investment bank perspective

Purpose - In the stakeholder marketing literature, there have been calls by several researchers to expand the stakeholder domain to incorporate a broader array of stakeholders. In developing this argument in this paper the authors aim to explore a set of stakeholder relationships in an international retailing context, notably those which exist between retail firms and investment banks. Design/methodology/approach - Theoretical ideas are subject to empirical scrutiny from 34 in-depth interviews with investment banks and senior retail executives from two retail multinationals. Findings - Exploratory findings suggest that US investment banks' ideals were at odds with European retail firms - and both occupied "different thought worlds". It is concluded that the relationships between financial stakeholders and the retail firm cannot be explained simply by reference to stylised economic interactions, but must also be examined in the light of the cultural contexts and different forms of market system within which different firms emerge, operate and interact. Originality/value - New strategies such as internationalisation stretch resources and capabilities to a point where retailers invariably will be exposed to different stakeholder issues and stresses. Towards this end, this paper contends that the significant international re-orientation under way in retailing must be understood within the wider context of stakeholder theory. The paper argues that the full potential of applying stakeholder marketing theory to the internationalisation process of retailers has yet to be realised. From this exploratory research, five research propositions are put forward that might serve as a guide to future research in this area. © Emerald Group Publishing Limited.

The mechanics of the conform continuous extrusion process

The work describes the programme of activities relating to a mechanical study of the Conform extrusion process. The main objective was to provide a basic understanding of the mechanics of the Conform process with particular emphasis placed on modelling using experimental and theoretical considerations. The experimental equipment used includes a state of the art computer-aided data-logging system and high temperature loadcells (up to 260oC) manufactured from tungsten carbide. Full details of the experimental equipment is presented in sections 3 and 4. A theoretical model is given in Section 5. The model presented is based on the upper bound theorem using a variation of the existing extrusion theories combined with temperature changes in the feed metal across the deformation zone. In addition, constitutive equations used in the model have been generated from existing experimental data. Theoretical and experimental data are presented in tabular form in Section 6. The discussion of results includes a comprehensive graphical presentation of the experimental and theoretical data. The main findings are: (i) the establishment of stress/strain relationships and an energy balance in order to study the factors affecting redundant work, and hence a model suitable for design purposes; (ii) optimisation of the process, by determination of the extrusion pressure for the range of reduction and changes in the extrusion chamber geometry at lower wheel speeds; and (iii) an understanding of the control of the peak temperature reach during extrusion.

Advanced manufacturing technology adoption in developing countries:the role of buyer-supplier relationships

Purpose – Developing countries are heavily dependent on the resources and commitment of foreign providers to ensure successful adoption of advanced manufacturing technology (AMT). The purpose of this paper is to describe the important role of buyer-supplier relationships (BSRs) in the process of technology selection, acquisition and implementation. Design/methodology/approach – A survey of 147 Malaysian manufacturing firms is the main instrument used in the research investigations and data analysis is carried out by the structured equation modelling (SEM) technique. In particular, the authors examine the impact on performance of different patterns of relationship between technology buyers and suppliers. Findings – Although the majority of the firms reported improvements in their performance since the acquisition of AMT, closer investigation reveals that those demonstrating a closer relationship with their suppliers are more likely to achieve higher levels of technology and implementation performance (IP) than those that do not. Research limitations/implications – The paper only assesses the strength of BSR from the buyers' perspective and they may have limited experience of acquisition, whereas suppliers may have more experience of selling AMT. Also, the research is undertaken in Malaysia and the findings may be different in other countries, especially where the technology being acquired is not imported but sourced locally. Practical implications – The findings relating to BSR, technology acquisition and IP have important implications both for customers and supplier firms as well as for industrial policy makers in developing countries. Originality/value – The result of the research provides useful insights that are especially pertinent to an improved understanding of BSRs in the procurement of capital equipment, about which the current research literature is limited.

Strategic planning as communicative process

This paper looks at how a strategic plan is constructed through a communicative process. Drawing on Ricoeur’s concepts of decontextualization and recontextualization, we conceptualize strategic planning activities as being constituted through the iterative and recursive relationship of talk and text. Based on an in-depth case study, our findings show how multiple actors engage in a formal strategic planning process which is manifested in a written strategy document. This document is thus central in the iterative talk to text cycles. As individuals express their interpretations of the current strategic plan in talk, they are able to make amendments to the text that then shape future textual versions of the plan. This iterative cycle is repeated until a final plan is agreed. We develop our findings into a model of the communication process that explains how texts become more authoritative over time and, in doing so, how they inscribe power relationships and social order within organizations. These findings contribute to the literature on the purposes of largely institutionalized processes of strategic planning and to the literature on organization as a communications process.

Measuring the operational performance of intensive care units using the analytic hierarchy process approach

Purpose - The purpose of this study is to develop a performance measurement model for service operations using the analytic hierarchy process approach. Design/methodology/approach - The study reviews current relevant literature on performance measurement and develops a model for performance measurement. The model is then applied to the intensive care units (ICUs) of three different hospitals in developing nations. Six focus group discussions were undertaken, involving experts from the specific area under investigation, in order to develop an understandable performance measurement model that was both quantitative and hierarchical. Findings - A combination of outcome, structure and process-based factors were used as a foundation for the model. The analyses of the links between them were used to reveal the relative importance of each and their associated sub factors. It was considered to be an effective quantitative tool by the stakeholders. Research limitations/implications - This research only applies the model to ICUs in healthcare services. Practical implications - Performance measurement is an important area within the operations management field. Although numerous models are routinely being deployed both in practice and research, there is always room for improvement. The present study proposes a hierarchical quantitative approach, which considers both subjective and objective performance criteria. Originality/value - This paper develops a hierarchical quantitative model for service performance measurement. It considers success factors with respect to outcomes, structure and processes with the involvement of the concerned stakeholders based upon the analytic hierarchy process approach. The unique model is applied to the ICUs of hospitals in order to demonstrate its effectiveness. The unique application provides a comparative international study of service performance measurement in ICUs of hospitals in three different countries. © Emerald Group Publishing Limited.

A study of business user based information systems development, and modelling success factors

This thesis describes research into business user involvement in the information systems application building process. The main interest of this research is in establishing and testing techniques to quantify the relationships between identified success factors and the outcome effectiveness of 'business user development' (BUD). The availability of a mechanism to measure the levels of the success factors, and quantifiably relate them to outcome effectiveness, is important in that it provides an organisation with the capability to predict and monitor effects on BUD outcome effectiveness. This is particularly important in an era where BUD levels have risen dramatically, user centred information systems development benefits are recognised as significant, and awareness of the risks of uncontrolled BUD activity is becoming more widespread. This research targets the measurement and prediction of BUD success factors and implementation effectiveness for particular business users. A questionnaire instrument and analysis technique has been tested and developed which constitutes a tool for predicting and monitoring BUD outcome effectiveness, and is based on the BUDES (Business User Development Effectiveness and Scope) research model - which is introduced and described in this thesis. The questionnaire instrument is designed for completion by 'business users' - the target community being more explicitly defined as 'people who primarily have a business role within an organisation'. The instrument, named BUD ESP (Business User Development Effectiveness and Scope Predictor), can readily be used with survey participants, and has been shown to give meaningful and representative results.

A new strategy for selecting and evaluating physical solvents for gas absorption

This work describes how the physical properties of a solvent affect the design variables of a physical gas absorption process. The role of every property in determining the capital and the running cost of a process has been specified. Direct mathematical relationships have been formulated between every item of capital or running cost and the properties which are related to that item. The accuracy of the equations formulated has been checked by comparing their outcome with some actual design data. A good agreement has been found. The equations formulated may be used to evaluate on the basis of economics any suggested new solvents. A group of solvents were selected for evaluation. Their physical properties were estimated or collected as experimental data. The selected ones include three important solvents, the first is polyethylene glycol dimethyl ether (Selexol) which represents the currently most successful one, The other two solvents are acetonyl acetone (B2) and n-formyl morpholine which have been suggested previously as potential credible alternatives to the current ones. The important characteristics of: acetonyl acetone are its high solubility and its low viscosity, while the n-formyl morpholine is characterised by its low vapour pressure and its high selectivity. It was found that acetonyl acetone (B2) is the most attractive solvent for commercial applications particularly for process configurations that:include heat exchangers and strippers. The effect of the process configuration on the selected solvent was investigated in detail and it was found that there is no universal solvent which is the best for any process configuration, but that there is a best solvent for a given process configuration. In previous work, acetonyl acetone was suggested as a commercially promising physical solvent. That suggestion was not fully based on experimental measurement of all the physical properties. The viscosity of acetonyl acetone and its solubility at 1 atm were measured but the vapour pressure and the solubility of C02 and CH4 at high pressure were predicted. In this work, the solubilities of C02, CH4 and C3H8 in acetenyl acetone were measured for a partial pressure range of (2 ~ 22) bar at 25°C, The vapour pressure of this solvent was also measured, and the Antoine equation was formulated from tbe experimental data. The experimental data were found to be not In agreement with the predicted ones, so acetonyl acetone was re-evaluated according to the experimental data. It was found that this solvent can be recommended for further trials in a pilot plant study or for small scale commercial units.