Navigating through the maze: the practical issues of conducting research for novices

New postgraduate students embark on their research journey typically with little or no experience in doing research. Supervisors and other more experienced student researchers might help them to find their feet during the first few weeks of their research by sharing their own experience of how they solved similar problems during their research. In this way each novice researcher can learn and benefit from other researchers´ ways of resolving problems. This paper discusses the real concerns that researchers reflected upon during a two-day research workshop, where researchers share problems, exchange ideas for overcoming them and learn from each other´s experiences of conducting research. The output from the workshop is in the form of hints and tips that can guide novice researchers when faced with initial problems. The paper can also be used by a department to induct a novice researcher into their environment.

Factor analysis and discriminant validity:a brief review of some practical issues

Growth in availability and ability of modern statistical software has resulted in greater numbers of research techniques being applied across the marketing discipline. However, with such advances come concerns that techniques may be misinterpreted by researchers. This issue is critical since misinterpretation could cause erroneous findings. This paper investigates some assumptions regarding: 1) the assessment of discriminant validity; and 2) what confirmatory factor analysis accomplishes. Examples that address these points are presented, and some procedural remedies are suggested based upon the literature. This paper is, therefore, primarily concerned with the development of measurement theory and practice. If advances in theory development are not based upon sound methodological practice, we as researchers could be basing our work upon shaky foundations.

Practical 3D reconstruction based on photometric stereo

Photometric Stereo is a powerful image based 3D reconstruction technique that has recently been used to obtain very high quality reconstructions. However, in its classic form, Photometric Stereo suffers from two main limitations: Firstly, one needs to obtain images of the 3D scene under multiple different illuminations. As a result the 3D scene needs to remain static during illumination changes, which prohibits the reconstruction of deforming objects. Secondly, the images obtained must be from a single viewpoint. This leads to depth-map based 2.5 reconstructions, instead of full 3D surfaces. The aim of this Chapter is to show how these limitations can be alleviated, leading to the derivation of two practical 3D acquisition systems: The first one, based on the powerful Coloured Light Photometric Stereo method can be used to reconstruct moving objects such as cloth or human faces. The second, permits the complete 3D reconstruction of challenging objects such as porcelain vases. In addition to algorithmic details, the Chapter pays attention to practical issues such as setup calibration, detection and correction of self and cast shadows. We provide several evaluation experiments as well as reconstruction results. © 2010 Springer-Verlag Berlin Heidelberg.

Designing a safety management support system using open architecture databases: the requirements of information representation in the support of managers' risk-related decision-making

This research was conducted at the Space Research and Technology Centre o the European Space Agency at Noordvijk in the Netherlands. ESA is an international organisation that brings together a range of scientists, engineers and managers from 14 European member states. The motivation for the work was to enable decision-makers, in a culturally and technologically diverse organisation, to share information for the purpose of making decisions that are well informed about the risk-related aspects of the situations they seek to address. The research examined the use of decision support system DSS) technology to facilitate decision-making of this type. This involved identifying the technology available and its application to risk management. Decision-making is a complex activity that does not lend itself to exact measurement or precise understanding at a detailed level. In view of this, a prototype DSS was developed through which to understand the practical issues to be accommodated and to evaluate alternative approaches to supporting decision-making of this type. The problem of measuring the effect upon the quality of decisions has been approached through expert evaluation of the software developed. The practical orientation of this work was informed by a review of the relevant literature in decision-making, risk management, decision support and information technology. Communication and information technology unite the major the,es of this work. This allows correlation of the interests of the research with European public policy. The principles of communication were also considered in the topic of information visualisation - this emerging technology exploits flexible modes of human computer interaction (HCI) to improve the cognition of complex data. Risk management is itself an area characterised by complexity and risk visualisation is advocated for application in this field of endeavour. The thesis provides recommendations for future work in the fields of decision=making, DSS technology and risk management.

Parallel implementation of image segmentation algorithms on a network of transputers

Image segmentation is one of the most computationally intensive operations in image processing and computer vision. This is because a large volume of data is involved and many different features have to be extracted from the image data. This thesis is concerned with the investigation of practical issues related to the implementation of several classes of image segmentation algorithms on parallel architectures. The Transputer is used as the basic building block of hardware architectures and Occam is used as the programming language. The segmentation methods chosen for implementation are convolution, for edge-based segmentation; the Split and Merge algorithm for segmenting non-textured regions; and the Granlund method for segmentation of textured images. Three different convolution methods have been implemented. The direct method of convolution, carried out in the spatial domain, uses the array architecture. The other two methods, based on convolution in the frequency domain, require the use of the two-dimensional Fourier transform. Parallel implementations of two different Fast Fourier Transform algorithms have been developed, incorporating original solutions. For the Row-Column method the array architecture has been adopted, and for the Vector-Radix method, the pyramid architecture. The texture segmentation algorithm, for which a system-level design is given, demonstrates a further application of the Vector-Radix Fourier transform. A novel concurrent version of the quad-tree based Split and Merge algorithm has been implemented on the pyramid architecture. The performance of the developed parallel implementations is analysed. Many of the obtained speed-up and efficiency measures show values close to their respective theoretical maxima. Where appropriate comparisons are drawn between different implementations. The thesis concludes with comments on general issues related to the use of the Transputer system as a development tool for image processing applications; and on the issues related to the engineering of concurrent image processing applications.

Progress in multichannel all-optical regeneration based on fiber technology

Multiwavelength all-optical regeneration has the potential to substantially increase both the capacity and scalability of future optical networks. In this paper, we review recent promising developments in this area. First, we recall the basic principles of multichannel regeneration of high bit rate signals in optical communication systems before discussing the current technological approaches. We then describe in detail two fiber-based multichannel 2R regeneration techniques for return-to-zero-on-off keying based on 1) dispersion managed systems and 2) direction and polarization multiplexing. We present results illustrating the levels of performance so far achieved and discuss various practical issues and prospects for further performance enhancement.

A bridge too far? Breaching the research/learning and teaching nexus in a previously research-led university

The relationship between research and learning and teaching represents what has been described as ‘amongst the most intellectually tangled, managerially complex and politically contentious issues in mass higher education’ (Scott, 2005, p 53). Despite this, arguments that in order to achieve high quality scholarly outcomes, university teachers need to adopt an approach to teaching similar to that of research (i.e. founded upon academic rigour and evidence), has long been discussed in the literature (see for example, Elton, 2005 & Healey, 2000). However, the practicalities of promoting an empirical and evidence-based approach to teaching within a research-led institution makes dealing with the research/learning and teaching nexus a somewhat challenging proposition. Drawing upon the findings of a mixed methodological study, this paper critically analyses the pedagogical, organisational and practical issues encountered by academics and support staff working within a newly established Centre for Learning Innovation and Professional Practice. Comprising an eclectic group of staff drawn from across the five Schools in the University, the Centre is dedicated to enhancing student learning through the development of evidence based teaching practice. Based upon the premise that the promotion of research-led teaching will act to bring teaching and research together, and in doing so enhance students learning experiences (Simmons & Elen 2007), the paper critically analyses the challenges encountered by staff responsible for developing and introducing a new learning & teaching focused organisational strategy (by reflecting on the previous 12 months work). In doing so it makes a significant contribution to current academic theory and debate in the areas of pedagogic practice and organisational management. Focusing specifically on the impact of the new policy on various aspects of university life including, pedagogic practice, student support, staff training, and organisational management, the paper critically addresses the cultural and attitudinal challenges of change management (Kotter, 1996) within a ‘grey-brick’ university. It concludes by arguing that the move towards becoming a more learning-focused university has started to develop an awareness of the positive impact the change initiative is having on the student experience and wider institution; whilst also drawing attention to the organisational challenges ahead.

Model evaluation and case series data

We discuss aggregation of data from neuropsychological patients and the process of evaluating models using data from a series of patients. We argue that aggregation can be misleading but not aggregating can also result in information loss. The basis for combining data needs to be theoretically defined, and the particular method of aggregation depends on the theoretical question and characteristics of the data. We present examples, often drawn from our own research, to illustrate these points. We also argue that statistical models and formal methods of model selection are a useful way to test theoretical accounts using data from several patients in multiple-case studies or case series. Statistical models can often measure fit in a way that explicitly captures what a theory allows; the parameter values that result from model fitting often measure theoretically important dimensions and can lead to more constrained theories or new predictions; and model selection allows the strength of evidence for models to be quantified without forcing this into the artificial binary choice that characterizes hypothesis testing methods. Methods that aggregate and then formally model patient data, however, are not automatically preferred to other methods. Which method is preferred depends on the question to be addressed, characteristics of the data, and practical issues like availability of suitable patients, but case series, multiple-case studies, single-case studies, statistical models, and process models should be complementary methods when guided by theory development.

Philosophy, theory, and practice of green operations management

This paper proposes a more profound discussion of the philosophical underpins of sustainability than currently exists in the MOT literature and considers their influence on the construction of the theories on green operations and technology management. Ultimately, it also debates the link between theory and practice on this subject area. The paper is derived from insights gained in three research projects completed during the past twelve years, primarily involving the first author. From 2000 to 2002, an investigation using scenario analysis, aimed at reducing atmospheric pollution in urban centres by substituting natural gas for petrol and diesel, provided the first set of insights about public policy, environmental impacts, investment analysis, and technological feasibility. The second research project, from 2003 to 2005, using a survey questionnaire, was aimed at improving environmental performance in livestock farming and explored the issues of green supply chain scope, environmental strategy and priorities. Finally, the third project, from 2006 to 2011, investigated environmental decisions in manufacturing organisations through case study research and examined the underlying sustainability drivers and decision-making processes. By integrating the findings and conclusions from these projects, the link between philosophy, theory, and practice of green operations and technology management is debated. The findings from all these studies show that the philosophical debate seems to have little influence on theory building so far. For instance, although ‘sustainable development’ emphasises ‘meeting the needs of current and future generation’, no theory links essentiality and environmental impacts. Likewise, there is a weak link between theory and the practical issues of green operations and technology management. For example, the well-known ‘life-cycle analysis’ has little application in many cases because the life cycle of products these days is dispersed within global production and consumption systems and there are different stakeholders for each life cycle stage. The results from this paper are relevant to public policy making and corporate environmental strategy and decision making. Most of the past and current studies in the subject of green operations and sustainability management deal with only a single sustainability dimension at any one time. Here the value and originality of this paper lies in its integration between philosophy, theory, and practice of green technology and operations management.

On a distinction between casual and formative variable models:theoretical issues and practical implications for organizational researchers

Formative measurement has seen increasing acceptance in organizational research since the turn of the 21st Century. However, in more recent times, a number of criticisms of the formative approach have appeared. Such work argues that formatively-measured constructs are empirically ambiguous and thus flawed in a theory-testing context. The aim of the present paper is to examine the underpinnings of formative measurement theory in light of theories of causality and ontology in measurement in general. In doing so, a thesis is advanced which draws a distinction between reflective, formative, and causal theories of latent variables. This distinction is shown to be advantageous in that it clarifies the ontological status of each type of latent variable, and thus provides advice on appropriate conceptualization and application. The distinction also reconciles in part both recent supportive and critical perspectives on formative measurement. In light of this, advice is given on how most appropriately to model formative composites in theory-testing applications, placing the onus on the researcher to make clear their conceptualization and operationalisation.

Non sexist-translation and/in social change: gender issues in translation

Following centuries of feminist struggle, centuries which have born witness to the close relationship between linguistic discrimination and social reality, there is a growing tendency in modern society to acknowledge the vital role played by language in overcoming gender discrimination. Political institutions are currently compensating by instituting the use of non-sexist language through legislative guidelines, and this makes an important contribution to social reform for equality between the sexes. Seeing that translation is so important for the creation of the collective identities on which modern global society depends, it is clear that non-sexist translation is crucial if there is to be non-sexist language. In this article I examine the potential of non-sexist translation in the struggle for gender equality from a both a theoretical and a practical viewpoint, and I end with a critical evaluation of non-sexist translation methods.

Social and scientific issues in the acceptibility of radiation risks

Ionising radiation hazards are perhaps the most documented and regulated occupational and environmental hazard. In the radiological protection field a single expert advisory organisation has had an unusually large influence on the international standard setting process. This is the International Commission on Radiological Protection (ICRP). Two common, and opposing views, exist over the formulation of protection recommendations by the ICRP. The first, and most widely accepted, is that its recommendations are scientifically determined. The second view, is that its recommendations are politically or socially determined. Neither of these analyses adequately accounts for the complex process in which protection recommendations are formulated. A third view, provided by studies of the origins of scientific controversy, suggests that both science and social factors are important in the assessment and limitation of risk. The aim of this thesis is not simply to examine the origin of controversy. Issues of equal, if not more, importance are the resolution of controversy, the formation of consensus and the maintenance of expert authority and influence. These issues form the central focus of this thesis. The aim is to assess the process through which the ICRP formulates its radiological protection recommendations and comment on the extent that these are influenced by the affiliations of its members. This thesis concludes that the ICRP's recommendations have been shaped by a complex relationship of scientific and social considerations, in which a socio-technical commitment to nuclear energy has played a key role. The Commission has responded to new scientific data by making complex changes to its philosophy and methods of describing risk. Where reductions in numerical limits have been applied they have been accompanied by practical measures designed to limit the impact of the change and provide continuity with the old limits and flexibility in the application of the new recommendations.

Virtual manufacturing:a study of some important issues relating to the transformation of traditional manufacturing organisations

This thesis starts with a literature review, outlining the major issues identified in the literature concerning virtual manufacturing enterprise (VME) transformation. Then it details the research methodology used – a systematic approach for empirical research. next, based on the conceptual framework proposed, this thesis builds three modules to form a reference model, with the purpose of clarifying the important issues relevant to transforming a traditional manufacturing company into a VME. The first module proposes a mechanism of VME transformation – operating along the VME metabolism. The second module builds a management function within a VME to ensure a proper operation of the mechanism. This function helps identify six areas as closely related to VME transformation: lean manufacturing; competency protection; internal operation performance measurement; alliance performance measurement; knowledge management; alliance decision making. The third module continues and proposes an alliance performance measurement system which includes 14 categories of performance indicators. An analysis template for alliance decision making is also proposed and integrated into the first module. To validate these three modules, 7 manufacturing organisations (5 in China and 2 in the UK) were investigated, and these field case studies are analysed in this thesis. The evidence found in these organisations, together with the evidence collected from the literature, including both researcher views and literature case studies, provide support for triangulation evidence. In addition, this thesis identifies the strength and weakness patterns of the manufacturing companies within the theoretical niche of this research, and clarifies the relationships among some major research areas from the perspective of virtual manufacturing. Finally, the research findings are summarised, as well as their theoretical and practical implications. Research limitations and recommendations for future work conclude this thesis.