Resistance heating of steel conductors of circular cross-section

The object of this thesis is to develop a method for calculating the losses developed in steel conductors of circular cross-section and at temperatures below 100oC, by the direct passage of a sinusoidally alternating current. Three cases are considered. 1. Isolated solid or tubular conductor. 2. Concentric arrangement of tube and solid return conductor. 3. Concentric arrangement of two tubes. These cases find applications in process temperature maintenance of pipelines, resistance heating of bars and design of bus-bars. The problems associated with the non-linearity of steel are examined. Resistance heating of bars and methods of surface heating of pipelines are briefly described. Magnetic-linear solutions based on Maxwell's equations are critically examined and conditions under which various formulae apply investigated. The conditions under which a tube is electrically equivalent to a solid conductor and to a semi-infinite plate are derived. Existing solutions for the calculation of losses in isolated steel conductors of circular cross-section are reviewed, evaluated and compared. Two methods of solution are developed for the three cases considered. The first is based on the magnetic-linear solutions and offers an alternative to the available methods which are not universal. The second solution extends the existing B/H step-function approximation method to small diameter conductors and to tubes in isolation or in a concentric arrangement. A comprehensive experimental investigation is presented for cases 1 and 2 above which confirms the validity of the proposed methods of solution. These are further supported by experimental results reported in the literature. Good agreement is obtained between measured and calculated loss values for surface field strengths beyond the linear part of the d.c. magnetisation characteristic. It is also shown that there is a difference in the electrical behaviour of a small diameter conductor or thin tube under resistance or induction heating conditions.

Investment efficiency among a cross-section of UK firms:implications for the debate on financing constraints

In this paper, we address this policy issue using a stylised methodology that relies on estimates of the cash flow sensitivity of firms’ investment, as well as a relatively new methodology that enables us to generate a (0, 1) bounded measure of investment efficiency of firms, i.e., the efficiency with which firms can convert their sales into investment, after controlling for unobserved year- and industry-specific effects. Higher investment efficiency is associated with lower financing constraint. Our results indicate that there is considerable heterogeneity in investment efficiency across firms, during a given year; the range being 0.57-0.82. However, the average investment efficiency measure is similar across years, regions and NACE 2-digit industries. We also do not find discernible patterns in the relationship between investment efficiency and firm size, both before and during the financial crisis. The results suggest that while some firms are clearly less efficient at translating their performance into investment, broad policies targeting firms of a certain size, or those within a particular industry or region, may not successfully address the problem of financing constraint in the United Kingdom. The targeting of firms with financing constraints may have to be considerably more refined, and look at not easily observable factors such as credit history/events and organisational capacity of the firms.

The measurement of isomeric cross-section ratios in neutron induced reactions.

DUE TO COPYRIGHT RESTRICTIONS ONLY AVAILABLE FOR CONSULTATION AT ASTON UNIVERSITY LIBRARY AND INFORMATION SERVICES WITH PRIOR ARRANGEMENT

Cross-sectional studies in prescribing research

A cross-sectional study aims to describe the overall picture of a phenomenon, a situational problem, an attitude or an issue, by asking a cross-section of a given population at one specified moment in time. This paper describes the key features of the cross-sectional survey method. It begins by highlighting the main principles of the method, then discusses stages in the research process, drawing on two surveys of primary care pharmacists to illustrate some salient points about planning, sampling frames, definition and conceptual issues, research instrument design and response rates. Four constraints in prescribing studies were noted. First the newness of the subject meant a low basis of existing knowledge to design a questionnaire. Second, there was no public existing database for the sampling frame, so a pragmatic sampling exercise was used. Third, the definition of a Primary Care Pharmacist (PCP) [in full] and respondents recognition of that name and identification with the new role limited the response. Fourth, a growing problem for all surveys, but particularly with pharmacists and general practitioners (GP) [in full] is the growing danger of survey fatigue, which has a negative impact on response levels.

Challenges for expatriate managers:an exploration of cross-cultural management, adjustment, and training issues faced by Anglo-American managers in Hong Kong

This field work study furthers understanding about expatriate management, in particular, the nature of cross-cultural management in Hong Kong involving Anglo-American expatriate and Chinese host national managers, the important features of adjustment for expatriates living and working there, and the type of training which will assist them to adjust and to work successfully in this Asian environment. Qualitative and quantitative data on each issue was gathered during in-depth interviews in Hong Kong, using structured interview schedules, with 39 expatriate and 31 host national managers drawn from a cross-section of functional areas and organizations. Despite the adoption of Western technology and the influence of Western business practices, micro-level management in Hong Kong retains a cultural specificity which is consistent with the norms and values of Chinese culture. There are differences in how expatriates and host nationals define their social roles, and Hong Kong's recent colonial history appears to influence cross-cultural interpersonal interactions. The inability of the spouse and/or family to adapt to Hong Kong is identified as a major reason for expatriate assignments to fail, though the causes have less to do with living away from family and friends, than with Hong Kong's highly urbanized environment and the heavy demands of work. Culture shock is not identified as a major problem, but in Hong Kong micro-level social factors require greater adjustment than macro-level societal factors. The adjustment of expatriate managers is facilitated by a strong orientation towards career development and hard work, possession of technical/professional expertise, and a willingness to engage in a process of continuous 'active learning' with respect to the host national society and culture. A four-part model of manager training suitable for Hong Kong is derived from the study data. It consists of a pre-departure briefing, post-arrival cross-cultural training, language training in basic Cantonese and in how to communicate more effectively in English with non-native speakers, and the assignment of a mentor to newly arrived expatriate managers.

What does endogenous growth theory tell about regional economies? Empirics of R&D worker-based productivity growth

What does endogenous growth theory tell about regional economies? Empirics of R&D worker-based productivity growth, Regional Studies. Endogenous growth theory emerged in the 1990s as ‘new growth theory’ accounting for technical progress in the growth process. This paper examines the role of research and development (R&D) workers underlying the Romer model (1990) and its subsequent modifications, and compares it with a model based on the accumulation of human capital engaged in R&D. Cross-section estimates of the models against productivity growth of European regions in the 1990s suggest that each R&D worker has a unique set of knowledge while his/her contributions are enhanced by knowledge sharing within a region as well as spillovers from other regions in proximity.

International student recruitment: South African rationales

In this paper, we focus on the rationales for the recruitment of international students to universities in South Africa. Through the use of in-depth interviews with international officers at a cross-section of South African universities, we argue that there are competing and complementary rationales for the recruitment of international students. Some South African universities follow international trends in terms of international student recruitment while others adopt a different approach. The analysis locates the rationales of international student recruitment as part of an internationalisation process within the context of globalisation. Dans cet article, nous nous focalisons sur les raisons derrière le recrutement des étudiants internationaux dans les universités de l'Afrique du Sud. Basé sur des interviews approfondies que nous avons menées avec les agents internationaux mandatés par les universités en Afrique du Sud, nous soutenons qu'il existe des raisons d'ordre compétitif et complémentaire qui expliquent le recrutement d'étudiants internationaux. Certaines universités sud africaines suivent la tendance de tels recrutement alors que d'autres adoptent une approche différente. Cette analyse identifie les raison du recrutement des étudiants internationaux dans le cadre du processus d'internationalisation dans le contexte de la globalisation.

Oxygen effects on irradiated tantalum alloys

Ta and Ta-1% W are being considered to be used as target clad materials in the LANSCE proton beam line for the material test station (MTS). To investigate the embrittlement of these materials due to oxygen contamination and proton irradiation, Ta and Ta-1 wt% W (as received and with ~400 ppm O) were exposed to a 3.5 MeV proton beam at the ion beam materials laboratory at LANL. After irradiating the samples in the proton beam, nanoindentation was performed in cross-section to investigate the hardness increase of the materials due to irradiation. The nanoindentation showed that the hardness increase due to irradiation is between 9% and 20% depending on the material. The results show good agreement with mechanical testing results on tantalum and Ta-1 wt% W after high energy proton irradiation to doses up to 23 dpa.

Vector bending sensors based on fibre Bragg gratings inscribed by infrared femtosecond laser

A novel, direction-sensitive bending sensor based on an asymmetric fiber Bragg grating (FBG) inscribed by an infrared femtosecond laser was demonstrated. The technique is based on tight transverse confinement of the femto-inscribed structures and can be directly applied in conventional, untreated singlemode fibers. The FBG structure was inscribed by an amplified, titanium sapphire laser system. The grating cross-section was elongated along the direction of the laser beam with the transverse dimensions of approximately 1 by 2 μm. It was suggested that the sensitivity of the device can be improved by inscribing smaller spatial features and by implementing more complex grating designs aimed at maximizing the effect of strain.

Nano-indentation measurement of oxide layers formed in LBE on F/M steels

Ferritic/martensitic (F/M) steels (T91, HT-9, EP 823) are candidate materials for future liquid lead or lead bismuth eutectic (LBE) cooled nuclear reactors. To understand the corrosion of these materials in LBE, samples of each material were exposed at 535 °C for 600 h and 200 h at an oxygen content of 10 wt%. After the corrosion tests, the samples were analyzed using SEM, WDX and nano-indentation in cross section. Multi-layered oxide scales were found on the sample surfaces. The compositions of these oxide layers are not entirely in agreement with the literature. The nano-indentation results showed that the E-modulus and hardness of the oxide layers are significantly lower than the values for dense bulk oxide materials. It is assumed that the low values stem from high porosity in the oxide layers. Comparison with in-air oxidized steels show that the E-modulus decreases with increasing oxide layer thickness. © 2008 Elsevier B.V. All rights reserved.

Servitization within manufacturing:exploring the provision of advanced services and their impact on vertical integration

Purpose – The debate about services-led competitive strategies continues to grow, with much interest emerging around the differing practices between production and servitized operations. The purpose of this paper is to contribute to this discussion by investigating the vertical integration practice (in particular the micro-vertical integration, otherwise known as the supply chain position) of manufacturers who are successful in their adoption of servitization. Design/methodology/approach – To achieve this the authors have investigated a cross-section of four companies which are successfully delivering advanced services coupled to their products. Findings – Manufacturers who have embraced the servitization trend tend to retain capabilities in design and production, and do so because this benefits their speed, effectiveness and costs of supporting assets on advanced services contracts. Research limitations/implications – These are preliminary findings from a longer term research programme. Practical implications – Through this research note the authors seek to simultaneously contribute to the debate in the research community and offer guidance to practitioners exploring the consequences of servitization. Originality/value – Successful servitization demands that manufacturers adopt new and alternative practices and technologies to those traditionally associated with production operations. A prevailing challenge is to understand these differences and their underpinning rationale. Therefore, in this research note, the authors report on the practices of four case companies, explore the rationale underpinning these, and propose an hypothesis for the impact on vertical integration of successful servitization.

Impact of soft contact lens edge design and mid-peripheral lens shape on the epithelium and its indentation with lens mobility

Purpose. To evaluate the influence of soft contact lens midperipheral shape profile and edge design on the apparent epithelial thickness and indentation of the ocular surface with lens movement. Methods. Four soft contact lens designs comprising of two different plano midperipheral shape profiles and two edge designs (chiseled and knife edge) of silicone-hydrogel material were examined in 26 subjects aged 24.7 ± 4.6 years, each worn bilaterally in randomized order. Lens movement was imaged enface on insertion, at 2 and 4 hours with a high-speed, high-resolution camera simultaneous to the cross-section of the edge of the contact lens interaction with the ocular surface captured using optical coherence tomography (OCT) nasally, temporally, and inferiorly. Optical imaging distortions were individually corrected for by imaging the apparent distortion of a glass slide surface by the removed lens. Results. Apparent epithelial thickness varied with edge position (P < 0.001). When distortion was corrected for, epithelial indentation decreased with time after insertion (P = 0.010), changed after a blink (P < 0.001), and varied with position on the lens edge (P < 0.001), with the latter being affected by midperipheral lens shape profile and edge design. Horizontal and vertical lens movement did not change with time postinsertion. Vertical motion was affected by midperipheral lens shape profile (P < 0.001) and edge design (P < 0.001). Lens movement was associated with physiologic epithelium thickness for lens midperipheral shape profile and edge designs. Conclusions. Dynamic OCT coupled with high-resolution video demonstrated that soft contact lens movement and image-corrected ocular surface indentation were influenced by both lens edge design and midperipheral lens shape profiles. © 2013 The Association for Research in Vision and Ophthalmology, Inc.

Evaluating the skills strategy through a Graduate Certificate in Management:an experiential learning theory approach

Purpose – The purpose of this paper is to evaluate how a UK business school is addressing the Government's skills strategy through its Graduate Certificate in Management, and to identify good practice and development needs and to clarify how the Graduate Certificate is adapting to the needs of Generation X and Millennial students. The paper also aims to test Kolb and Kolb's experiential learning theory (ELT) in a business school setting. Design/methodology/approach – A case study methodology was adopted. In order to get a cross-section of views and triangulate the data, three focus groups were held, supported by reading documentation about the programme of study. Findings – The skills strategy is not just an ambition for some business schools, but is already part of the curriculum. Generation X and the Millennials have more in common with the positive attitudes associated with older generations than stereotyped views might allow. ELT provides a useful theoretical framework for evaluating a programme of study and student attitudes. Research limitations/implications – The research findings from one case study are reported, limiting the generalisability of the study. Practical implications – Good practice and development needs are identified which support the implementation of the Government's skills strategy and address employer concerns about student skills. Originality/value – New empirical data are reported which supports the use of ELT in evaluating programmes of study and student attitudes to work.