Strategies and therapeutic opportunities for the delivery of drugs to the esophagus

Targeting of drugs and therapies locally to the esophagus is an important objective in the development of new and more effective dosage forms. Therapies that are retained within the oral cavity for both local and systemic action have been utilized for many years, although delivery to the esophagus has been far less reported. Esophageal disease states, including infections, motility disorders, gastric reflux, and cancers, would all benefit from localized drug delivery. Therefore, research in this area provides significant opportunities. The key limitation to effective drug delivery within the esophagus is sufficient retention at this site coupled with activity profiles to correspond with these retention times; therefore, a suitable formulation needs to provide the drug in a ready-to-work form at the site of action during the rapid transit through this organ. A successfully designed esophageal-targeted system can overcome these obstacles. This review presents a range of dosage form approaches for targeting the esophagus, including bioadhesive liquids and orally retained lozenges, chewing gums, gels, and films, as well as endoscopically delivered therapeutics. The techniques used to measure efficacy both in vitro and in vivo are also discussed. Drug delivery is a growing driver within the pharmaceutical industry and offers benefits both in terms of clinical efficacy, as well as in market positioning, as a means of extending a drug's exclusivity and profitability. Emerging systems that can be used to target the esophagus are reported within this review, as well as the potential of alternative formulations that offer benefits in this exciting area.

The stability of pharmaceutical powders: effect of additives and coating

The decomposition of drugs in the solid state has been studied using aspirin and salsalate as models. The feasibility of using suspension systems for predicting the stability of these drugs in the solid state has been investigated.. It has been found that such systems are inappropriate in defining the effect of excipients on 'the decomposition of the active drug due to chqnges in the degradation pathway. Using a high performance liquid chromatographic method, magnesium stearate was shown to induce the formation of potentlally immunogenic products in aspirin powders. These products which included salicylsalicylic acid .and acetylsalicyclsalicylic acid were not detected in aspirin suspensions which had undergone the same extent of decomposition. By studying the effect of pH and of added excipients on the rate of decomposition of aspirin in suspension systems, it has been shown that excipients such as magnesium stearate containing magnesium oxide, most probably enhance the decomposition of both aspirin and salsalate by alkalinising the aqueous phase. In the solid state, pH effects produced by excipients appear to be relatively unimportant. Evidence is presented to suggest that the critical parameter is a depression in melting point induced by: the added excipient. Microscopical examination in fact showed the formation of clear liquid layers in aspirin samples containing added magnesium stearate but not in control samples. Kinetic equations which take into account both the diffusive barrier presented by the liquid films and the. geometry of the aspirin crystals were developed. Fitting of the .experimental data to these equations showed good agreement. with the postulated theory. Monitorjng of weight issues during the decomposition of aspirin revealed that in the solid systems studied where the bulk of the decomposition product sublimes, it is possible to estimate the extent of degradation from the residual weight, provided the initial weight is known. The corollary is that in such open systems, monitoring of decomposition products is inadequate for assessing the extent of decomposition. In addition to the magnesium stearate-aspirin system, mapyramine maleate-aspirin mixtures were used to model interactive systems. Work carried out in an attempt to stabilise such systems included microencapsulation and film coating. The protection obtained was dependent on the interactive species used. Gelatin for example appeared to stabilise aspirin against the adverse effects of magnesium stearate but increased its decomposition in the presence of mapyramine maleate.

Ordered mixing of drugs with particulate excipients

A novel direct compression tableting excipient has been made by recrystallisation of lactose. The particles produced had high porosity, high specific surface area and high surface roughness. The resistance to segregation of ordered mixes formed between a model drug; potassium chloride and the excipients recrystallised lactose, spray crystallised maltose-dextrose (Emdexl and a direct compacting sugar (Dipac) was studied using a vibrational segregation model. The highly porous excipients, Emdex and recrystallised lactose formed ordered mixes which did not segregate even at high accelerations and low frequencies whereas the relatively smooth excipient, Dipac, displayed marked segregation in most vibration conditions. The vibrations were related to practical conditions measured in pharmaceutical process machinery. The time required to form an ordered mix was inversely related to the stability of the mix when subjected to vibration. An ultracentrifuge technique was developed to determine the interparticle adhesion forces holding drug and excipient particles together as ordered units. Excipient powders such as Emdex and recrystallised lactose, which formed non-segregating ordered mixes, had high interparticle adhesion forces. Other ordered mixes that segregated when subjected to different vibration conditions were found to have large quantities of weekly-bound drug particles; such mixes included those with Dipac as the carrier excipient as well as those containing a high concentration of drug. The electrostatic properties of different drug and excipient powders were studied using a Faraday well and an electrometer. Excipient powders such as Emdex and recrystallised lactose which formed stable ordered mixes also had a widely different surface charge in comparison with drug particles, whereas Dipac had a similar surface charge to the drug particles and formed unstable ordered mixes. A specially constructed triboelectric charging apparatus based on an air cyclone was developed to increase the affinity of drug particles for different excipient particles. Using triboelectrification to increase the interparticle adhesion forces, the segregation tendencies of unstable ordered mixes were greatly reduced. The stability of ordered mixes is shown to be related to both the surface physical characteristics and the surface electrical properties of the constituent carrier (excipientl particles.

Innovation in the pharmaceutical industry:a study of the effects of regulation on the U.K. pharmaceutical industry

A history of government drug regulation and the relationship between the pharmaceutical companies in the U.K. and the licensing authority is outlined. Phases of regulatory stringency are identified with the formation of the Committees on Safety of Drugs and Medicines viewed as watersheds. A study of the impact of government regulation on industrial R&D activities focuses on the effects on the rate and direction of new product innovation. A literature review examines the decline in new chemical entity innovation. Regulations are cited as a major but not singular cause of the decline. Previous research attempting to determine the causes of such a decline on an empirical basis is given and the methodological problems associated with such research are identified. The U.K. owned sector of the British pharmaceutical industry is selected for a study employing a bottom-up approach allowing disaggregation of data. A historical background to the industry is provided, with each company analysed or a case study basis. Variations between companies regarding the policies adopted for R&D are emphasised. The process of drug innovation is described in order to determine possible indicators of the rate and direction of inventive and innovative activity. All possible indicators are considered and their suitability assessed. R&D expenditure data for the period 1960-1983 is subsequently presented as an input indicator. Intermediate output indicators are treated in a similar way and patent data are identified as a readily-available and useful source. The advantages and disadvantages of using such data are considered. Using interview material, patenting policies for most of the U.K. companies are described providing a background for a patent-based study. Sources of patent data are examined with an emphasis on computerised systems. A number of searches using a variety of sources are presented. Patent family size is examined as a possible indicator of an invention's relative importance. The patenting activity of the companies over the period 1960-1983 is given and the variation between companies is noted. The relationship between patent data and other indicators used is analysed using statistical methods resulting in an apparent lack of correlation. An alternative approach taking into account variations in company policy and phases in research activity indicates a stronger relationship between patenting activity, R&D Expenditure and NCE output over the period. The relationship is not apparent at an aggregated company level. Some evidence is presented for a relationship between phases of regulatory stringency, inventive and innovative activity but the importance of other factors is emphasised.

Molecular architecture influences on material properties of pharmaceutical compounds

Salt formation has extensively been studied as a strategy to improve drug solubility but it has not been explored as a strategy to improve mechanical properties. A better understanding of which factors of the solid state can have an influence in the mechanical properties of pharmaceutical powders can help to optimise and reduce cost of tablet manufacturing. The aim of this study was to form different series of amine salts of flurbiprofen, gemfibrozil and diclofenac and to establish predictive relationships between architectural characteristics and physicochemical and mechanical properties of the salts. For this purpose, three different carboxylic acid drugs were selected: flurbiprofen, gemfibrozil and diclofenac, similar in size but varying in flexibility and shape and three different series of counterions were also chosen: one with increasing bulk and no hydroxyl groups to limit the hydrogen bonding potential; a second one with increasing number of hydroxyl groups and finally a third series, related to the latter in number of hydroxyl groups but with different molecular shape and flexibility. Physico-chemical characterization was performed (DSC, TGA, solubility, intrinsic dissolution rate, particle size, true density) and mechanical properties measured using a compaction replicator. Strained molecular conformations produce weaker compacts as they have higher energy than preferred conformations that usually lie close to energy minimums and oppose plastic deformation. It was observed that slip planes, which correspond to regions of weakest interaction between the planes, were associated with improved plasticity and stronger compacts. Apart from hydrogen bonds, profuse van der Waals forces can result in ineffective slip planes. Salts displaying two-dimensional densely hydrogen bonded layers produced stronger compacts than salts showing one-dimensional networks of non-bonded columns, probably by reducing the attachment energy between layers. When hydrogen bonds are created intramolecularly, it is possible that the mechanical properties are compromised as they do not contribute so much to create twodimensional densely bonded layers and they can force molecules into strained conformations. Some types of hydrogen bonding network may be associated with improved mechanical properties, such as type II, or R (10) 3 4 using graph-set notation, versus type III, or R (12) 4 8 , columns. This work clearly demonstrates the potential of investigating crystal structure-mechanical property relationship in pharmaceutical materials.

Social aspects of pharmaceutical innovation: heart disease

This study examines the invention, innovation, introduction and use of a new drug therapy for coronary heart disease and hypertension; beta-blockade. The relationships between drug introductions and changes in medical perceptions of disease are analysed, and the development and effects of our perception of heart disease through drug treatments and diagnostic technology is described. The first section looks at the evolution of hypertension from its origin as a kidney disorder, Bright's disease, to the introduction and use of effective drugs for its treatment. It is shown that this has been greatly influenced by the introduction of new medical technologies. A medical controversy over its nature is shown both to be strongly influenced by the use of new drugs, and to influence their subsequent use. The second section reviews the literature analysing drug innovation, and examines the innovation of the beta-blocking drugs, making extensive use of participant accounts. The way in which the development of receptor theory, the theoretical basis of the innovation,was influenced by the innovation and use of drugs is discussed, then the innovation at ICI, the introduction into clinical use, and the production of similar drugs by other manufacturers are described. A study of the effects of these drugs is then undertaken, concentrating on therapeutic costs and benefits, and changes in medical perceptions of disease. The third section analyses the effects of other drugs on heart disease, looking at changes in mortality statistics and in medical opinions. The study concludes that linking work on drug innovation with that on drug effects is fruitful, that new drugs and diagnostic technology have greatly influenced medical perceptions of the nature and extent of heart disease, and that in hypertension, the improvement in drug treatment will soon result in much of the population being defined as in need of it life-long.

Applied pharmaceutical practice

Applied Pharmaceutical Practice is an invaluable resource and will guide the student pharmacist and pharmacy technician through the main stages involved in pharmaceutical dispensing. As a core reference text, it is ideal as a companion to the compulsory dispensing courses found in all undergraduate MPharm programmes and the equivalent technical training courses. Contents include: •medicines classification and standard operating procedures •NHS supply in the community and within hospitals •non-NHS supply •controlled drugs •emergency supply •patient counselling and communication •poisons and spirits This practical textbook contains useful exercises with an answers section and numerous examples and is written by authors with extensive experience within the field. This is a comprehensive guide through the main stages of pharmaceutical dispensing.The textbook is designed to guide student pharmacists or pharmacy technicians through the main stages involved in pharmaceutical dispensing. It provides students with a core reference text to accompany the compulsory dispensing course found in all pharmacy undergraduate programmes, highlighting and explaining all key concepts behind the processes involved in pharmaceutical dispensing.

Quality control of pharmaceutical ingredients:developing a caking test for industry

Objectives - Powdered and granulated particulate materials make up most of the ingredients of pharmaceuticals and are often at risk of undergoing unwanted agglomeration, or caking, during transport or storage. This is particularly acute when bulk powders are exposed to extreme swings in temperature and relative humidity, which is now common as drugs are produced and administered in increasingly hostile climates and are stored for longer periods of time prior to use. This study explores the possibility of using a uniaxial unconfined compression test to compare the strength of caked agglomerates exposed to different temperatures and relative humidities. This is part of a longer-term study to construct a protocol to predict the caking tendency of a new bulk material from individual particle properties. The main challenge is to develop techniques that provide repeatable results yet are presented simply enough to be useful to a wide range of industries. Methods - Powdered sucrose, a major pharmaceutical ingredient, was poured into a split die and exposed to high and low relative humidity cycles at room temperature. The typical ranges were 20–30% for the lower value and 70–80% for the higher value. The outer die casing was then removed and the resultant agglomerate was subjected to an unconfined compression test using a plunger fitted to a Zwick compression tester. The force against displacement was logged so that the dynamics of failure as well as the failure load of the sample could be recorded. The experimental matrix included varying the number of cycles, the amount between the maximum and minimum relative humidity, the height and diameters of the samples, the number of cycles and the particle size. Results - Trends showed that the tensile strength of the agglomerates increased with the number of cycles and also with the more extreme swings in relative humidity. This agrees with previous work on alternative methods of measuring the tensile strength of sugar agglomerates formed from humidity cycling (Leaper et al 2003). Conclusions - The results show that at the very least the uniaxial tester is a good comparative tester to examine the caking tendency of powdered materials, with a simple arrangement and operation that are compatible with the requirements of industry. However, further work is required to continue to optimize the height/ diameter ratio during tests.

Modeling the effects of pharmaceutical marketing

Successful innovation of prescription drugs requires a substantial amount of marketing support. There is, however, much concern about the effects of marketing expenditures on the demand of pharmaceutical products (Manchanda et al., Market Lett 16(3/4):293–308, 2005). For example, excessive marketing could stimulate demand for products in the absence of a fundamental need. It also has been suggested that increased marketing expenditures may reduce the price elasticity of demand and allow firms to charge higher prices (Windmeijer et al., Health Econ 15(1):5–18, 2005). In this paper, we present the outcomes of an empirical study in which we determine the effects of pharmaceutical marketing expenditures using a number of frequently used “standardized” models. We determine which models perform best in terms of predictive validity and adequate descriptions of reality. We demonstrate, among others, that the effects of promotional efforts are brand specific and that most standardized models do not provide adequate descriptions of reality. We find that marketing expenditures have no or moderate effects on demand for pharmaceutical products in The Netherlands.

Impact of the counterion on the solubility and physicochemical properties of salts of carboxylic acid drugs

Aim: Salt formation is a widely used approach to improve the physicochemical and solid state properties of an active pharmaceutical ingredient. In order to better understand the relationships between the active drug, the selected counterion and the resultant salt form, crystalline salts were formed using four different carboxylic acid drugs and a closely related series of amine counterions. Thirty-six related crystalline salts were prepared, characterized and the relationship between solubility and dissolution behaviour and other properties of the salt and the counterion studied. Methods: Salts of four model acid drugs, gemfibrozil, flurbiprofen, ibuprofen and etodolac were prepared using the counterions butylamine, hexylamine, octylamine, benzylamine, cyclohexylamine, tert-butylamine, 2-amino-2-methylpropan-1-ol, 2-amino-2-methylpropan-1,3-diol andtris(hydroxymethyl)aminomethane. Salt formation was confirmed, the salts were characterized and their corresponding solubilities determined and rationalized with respect to the counterions' properties. Results and conclusion: The properties of the salt highly dependent on the nature of the counterion and, although there is considerable variation, some general conclusion can be drawn. For the alkyl amines series, increasing chain length leads to a reduction in solubility across all the acidic drugs studied and a reduction in melting point, thus contradicting simplistic relationships between solubility and melting point. Small, compact counterions consistently produce crystalline salts with high melting point accompanied with a modest improvement in solubility and the nature of hydrogen bonding between the ions has a major impact on the solubility. © 2012 Informa Healthcare USA, Inc.

Applied pharmaceutical practice

Applied Pharmaceutical Practice is an invaluable resource and will guide the student pharmacist and pharmacy technician through the main stages involved in pharmaceutical dispensing. As a core reference text, it is ideal as a companion to the compulsory dispensing courses found in all undergraduate MPharm programmes and the equivalent technical training courses. Contents include: •medicines classification and standard operating procedures •NHS supply in the community and within hospitals •non-NHS supply •controlled drugs •emergency supply •patient counselling and communication •poisons and spirits This practical textbook contains useful exercises with an answers section and numerous examples and is written by authors with extensive experience within the field. This is a comprehensive guide through the main stages of pharmaceutical dispensing.The textbook is designed to guide student pharmacists or pharmacy technicians through the main stages involved in pharmaceutical dispensing. It provides students with a core reference text to accompany the compulsory dispensing course found in all pharmacy undergraduate programmes, highlighting and explaining all key concepts behind the processes involved in pharmaceutical dispensing.