An investigation into the nature and consequences of teachers' implicit philosophies of science

The aims of this study were to investigate the beliefs concerning the philosophy of science held by practising science teachers and to relate those beliefs to their pupils' understanding of the philosophy of science. Three philosophies of science, differing in the way they relate experimental work to other parts of the scientific enterprise, are described. By the use of questionnaire techniques, teachers of four extreme types were identified. These are: the H type or hypothetico-deductivist teacher, who sees experiments as potential falsifiers of hypotheses or of logical deductions from them; the I type or inductivist teacher, who regards experiments mainly as a way of increasing the range of observations available for recording before patterns are noted and inductive generalisation is carried out; the V type or verificationist teacher, who expects experiments to provide proof and to demonstrate the truth or accuracy of scientific statements; and the 0 type, who has no discernible philosophical beliefs about the nature of science or its methodology. Following interviews of selected teachers to check their responses to the questionnaire and to determine their normal teaching methods, an experiment was organised in which parallel groups were given H, I and V type teaching in the normal school situation during most of one academic year. Using pre-test and post-test scores on a specially developed test of pupil understanding of the philosophy of science, it was shown that pupils were positively affected by their teacher's implied philosophy of science. There was also some indication that V type teaching improved marks obtained in school science examinations, but appeared to discourage the more able from continuing the study of science. Effects were also noted on vocabulary used by pupils to describe scientists and their activities.

Tear analysis and lens-tear interactions:part II. Ocular lipids-nature and fate of meibomian gland phospholipids

Purpose: Published data indicate that the polar lipid content of human meibomian gland secretions (MGS) could be anything between 0.5% and 13% of the total lipid. The tear film phospholipid composition has not been studied in great detail and it has been understood that the relative proportions of lipids in MGS would be maintained in the tear film. The purpose of this work was to determine the concentration of phospholipids in the human tear film. Methods: Liquid chromatography mass spectrometry (LCMS) and thin layer chromatography (TLC) were used to determine the concentration of phospholipid in the tear film. Additionally, an Amplex Red phosphatidylcholine-specific phospholipase C (PLC) assay kit was used for determination of the activity of PLC in the tear film. Results: Phospholipids were not detected in any of the tested human tear samples with the low limit of detection being 1.3 µg/mL for TLC and 4 µg/mL for liquid chromatography mass spectrometry. TLC indicated that diacylglycerol (DAG) may be present in the tear film. PLC was in the tear film with an activity determined at approximately 15 mU/mL, equivalent to the removal of head groups from phosphatidylcholine at a rate of approximately 15 µM/min. Conclusions: This work shows that phospholipid was not detected in any of the tested human tear samples (above the lower limits of detection as described) and suggests the presence of DAG in the tear film. DAG is known to be at low concentrations in MGS. These observations indicate that PLC may play a role in modulating the tear film phospholipid concentration.

Transducer diffraction theory and development of an ultrasonic tomogram

The work described in this thesis is the development of an ultrasonic tomogram to provide outlines of cross-sections of the ulna in vivo. This instrument, used in conjunction with X-ray densitometry previously developed in this department, would provide actual bone mineral density to a high resolution. It was hoped that the accuracy of the plot obtained from the tomogram would exceed that of existing ultrasonic techniques by about five times. Repeat measurements with these instruments to follow bone mineral changes would involve very low X-ray doses. A theoretical study has been made of acoustic diffraction, using a geometrical transform applicable to the integration of three different Green's functions, for axisymmetric systems. This has involved the derivation of one of these in a form amenable to computation. It is considered that this function fits the boundary conditions occurring in medical ultrasonography more closely than those used previously. A three dimensional plot of the pressure field using this function has been made for a ring transducer, in addition to that for disc transducers using all three functions. It has been shown how the theory may be extended to investigate the nature and magnitude of the particle velocity, at any point in the field, for the three functions mentioned. From this study. a concept of diffraction fronts has been developed, which has made it possible to determine energy flow also in a diffracting system. Intensity has been displayed in a manner similar to that used for pressure. Plots have been made of diffraction fronts and energy flow direction lines.

An investigation of the prevalence and measurement of teams in organisations:the development and validation of the real team scale

This thesis begins with a review of the literature on team-based working in organisations, highlighting the variations in research findings, and the need for greater precision in our measurement of teams. It continues with an illustration of the nature and prevalence of real and pseudo team-based working, by presenting results from a large sample of secondary data from the UK National Health Service. Results demonstrate that ‘real teams’ have an important and significant impact on the reduction of many work-related safety outcomes. Based on both theoretical and methodological limitations of existing approaches, the thesis moves on to provide a clarification and extension of the ‘real team’ construct, demarcating this from other (pseudo-like) team typologies on a sliding scale, rather than a simple dichotomy. A conceptual model for defining real teams is presented, providing a theoretical basis for the development of a scale on which teams can be measured for varying extents of ‘realness’. A new twelve-item scale is developed and tested with three samples of data comprising 53 undergraduate teams, 52 postgraduate teams, and 63 public sector teams from a large UK organisation. Evidence for the content, construct and criterion-related validity of the real team scale is examined over seven separate validation studies. Theoretical, methodological and practical implications of the real team scale are then discussed.

The possibilities and limits of contestation in times of 'urban austerity'

This paper seeks to provide a conceptual framework in which to examine the social practices of contemporary austerity programmes in urban areas, including how these relate to different conceptions of crisis. Of current theoretical interest is the apparent ease with which these austerity measures have been accepted by urban governing agents. In order to advance these understandings we follow the recent post-structuralist discourse theory ‘logics’ approach of Glynos and Howarth (2007), focusing on the relationship between hegemony, political and social logics, and the subject whose identificatory practices are key to understanding the form, nature and stability of discursive settlements. In such thinking it is not only the formation of discourses and the mobilisation of rhetoric that are of interest, but also the manner in which the subjects of austerity identify with these. Through such an approach we examine the case of the regeneration/economic development and planning policy area in the city government of Birmingham (UK). In conclusion, we argue that the logics approach is a useful framework through which to examine how austerity has been uncontested in a city government, and the dynamics of acquiescence in relation to broader hegemonic discursive formations.

Synthesis and evaluation of novel ligands for quantum dot stabilisation and polymerisation studies

This thesis describes the design and synthesis of a variety of functionalised phosphine oxides and sulfides, based on the structure of trioctylphosphine oxide, synthesised for the purpose of surface modification of quantum dots. The ability of the ligands to modify the surface chemistry via displacement of the original hexadecylamine capping layer of quantum dots was evaluated. Finally the surface modified quantum dots were investigated for enhancement in their inherent properties and improved compatibility with the various applications for which they were initially designed. Upon the commencement of research involving quantum dots it became apparent that more information on their behaviour and interaction with the environment was required. The limits of the inherent stability of hexadecylamine capped quantum dots were investigated by exposure to a number of different environments. The effect upon the stability of the quantum dots was monitored by changes in the photoluminescence ability of their cores. Subtle differences between different batches of quantum dots were observed and the necessity to account for these in future applications noted. Lastly the displacement of the original hexadecylamine coating with the "designer" functionalised ligands was evaluated to produce a set of conditions that would result in the best possible surface modification. A general procedure was elucidated however it was discovered that each displacement still required slight adjustment by consideration of the other factors such as the difference in ligand structure and the individuality of the various batches of quantum dots. This thesis also describes a procedure for the addition of a protective layer to the surface of quantum dots by cross-linking the functionalised ligands bound to the surface via an acyclic diene metathesis polymerisation. A detailed description of the problems encountered in the analysis of these materials combined with the use of novel techniques such as diffusion ordered spectroscopy is provided as a means to overcome the limitations encountered. Finally a demonstration of the superior stability, upon exposure to a range of aggressive environments of these protected materials compared with those before cross-linking provided physical proof of the cross-linking process and the advantages of the cross-linking modification. Finally this thesis includes the presentation of initial work into the production of luminescent nanocrystal encoded resin beads for the specific use in solid phase combinatorial chemistry. Demonstration of the successful covalent incorporation of quantum dots into the polymeric matrices of non-functionalised and functionalised resin beads is described. Finally by preliminary work to address and overcome the possible limitations that may be encountered in the production and general employment of these materials in combinatorial techniques is given.

An investigation into the nature, determinants, and dynamics of service quality expectations

On the basis of a review of the substantive quality and service marketing literature current knowledge regarding service quality expectations was found either absent or deficient. The phenomenon is of increasing importance to both marketing researchers and management and was therefore judged worthy of scholarly consideration. Because the service quality literature was insufficiently rich when embarking on the thesis three basic research issues were considered namely the nature, determinants, and dynamics of service quality expectations. These issues were first conceptually and then qualitatively explored. This process generated research hypotheses mainly relating to a model which were subsequently tested through a series of empirical investigations using questionnaire data from field studies in a single context. The results were internally consistent and strongly supported the main research hypotheses. It was found that service quality expectations can be meaningfully described in terms of generic/service-specific, intangible/tangible, and process/outcome categories. Service-specific quality expectations were also shown to be determined by generic service quality expectations, demographic variables, personal values, psychological needs, general service sophistication, service-specific sophistication, purchase motives, and service-specific information when treating service class involvement as an exogenous variable. Subjects who had previously not directly experienced a particular service were additionally found to revise their expectations of quality when exposed to the service with change being driven by a sub-set of identified determinants.

A retrospective study examining the nature, contributory factors and predictors of dispensing errors in community pharmacy

Introduction: Since 2005, the workload of community pharmacists in England has increased with a concomitant increase in stress and work pressure. However, it is unclear how these factors are impacting on the ability of community pharmacists to ensure accuracy during the dispensing process. This research seeks to extend our understanding of the nature, outcome, and predictors of dispensing errors. Methodology: A retrospective analysis of a purposive sample of incident report forms (IRFs) from the database of a pharmacist indemnity insurance provider was conducted. Data collected included; type of error, degree of harm caused, pharmacy and pharmacist demographics, and possible contributory factors. Results: In total, 339 files from UK community pharmacies were retrieved from the database. The files dated from June 2006 to November 2011. Incorrect item (45.1%, n = 153/339) followed by incorrect strength (24.5%, n = 83/339) were the most common forms of error. Almost half (41.6%, n = 147/339) of the patients suffered some form of harm ranging from minor harm (26.7%, n = 87/339) to death (0.3%, n = 1/339). Insufficient staff (51.6%, n = 175/339), similar packaging (40.7%, n = 138/339) and the pharmacy being busier than normal (39.5%, n = 134/339) were identified as key contributory factors. Cross-tabular analysis against the final accuracy check variable revealed significant association between the pharmacy location (P < 0.024), dispensary layout (P < 0.025), insufficient staff (P < 0.019), and busier than normal (P < 0.005) variables. Conclusion: The results provide an overview of some of the individual, organisational and technical factors at play at the time of a dispensing error and highlight the need to examine further the relationships between these factors and dispensing error occurrence.