Determining the contribution of technical change, efficiency change and scale change to productivity growth in the privatized English and Welsh water and sewerage industry:1985-2000

The water and sewerage industry of England and Wales was privatized in 1989 and subjected to a new regime of environmental, water quality and RPI+K price cap regulation. This paper estimates a quality-adjusted input distance function, with stochastic frontier techniques in order to estimate productivity growth rates for the period 1985-2000. Productivity is decomposed so as to account for the impact of technical change, efficiency change, and scale change. Compared with earlier studies by Saal and Parker [(2000) Managerial Decision Econ 21(6):253-268, (2001) J Regul Econ 20(1): 61-90], these estimates allow a more careful consideration of how and whether privatization and the new regulatory regime affected productivity growth in the industry. Strikingly, they suggest that while technical change improved after privatization, productivity growth did not improve, and this was attributable to efficiency losses as firms appear to have struggled to keep up with technical advances after privatization. Moreover, the results also suggest that the excessive scale of the WaSCs contributed negatively to productivity growth. © 2007 Springer Science+Business Media, LLC.

A comparison of U.S. and Japanese management systems and their transferability to Singapore industry

This research compares U.S. and Japanese management systems and evaluates their transferability to the Singaporean manufacturing industry. The objectives were:- a) To determine the effectiveness of U.S. and Japanese management systems when applied to Singapore. b) Determine the extent of transferability of U.S. and Japanese management systems to Singapore. c) Survey general problems ecountered in the application of U.S. and Japanese management systems to the Singapore industry. The study using questionnaire survey and interviews covered a total of eighty companies from four groups of firms in four industrial sectors comprising of U.S. and Japanese subsidiaries based in Singapore and their respective parent companies. Data from the questionnaires and interviews were used to investigate environmental conditions, management philosophy, management functions/practices, management effectiveness, and firm productivity. Two-way analysis of variance was used to analyse the questionnaire data. The analysis of the perceptual data from the questionnaire survey and interviews suggested that both U.S. and Japanese parent companies performed better in almost all the management variables studied when compared to their subsidiaries in Singapore. U.S. subsidiaries have less difficulty in adjusting to the Singapore environmental conditions and obtained better results than the Japanese subsidiaries in management functions/practices and management philosophy than the U.S. subsidiaries. In addition, the firm productivity (in terms of labour and capital productivity) of U.S. subsidiaries in Singapore was found to be higher than those of the Japanese subsidiaries. It was found that the Japanese parent companies returned the highest score among the four groups of firms in all the four industrial sectors for all the four management variables (i.e. environmental conditions, management philosophy, management functions/practices, and management effectiveness) surveyed using questionnaires. In contrast, the average score for Japanese subsidiaries in Singapore was generally the lowest among the four groups of firms. Thus the results of this study suggest that the transfer of U.S. management system into the Singapore industry is more successful than the Japanese management system. The problems encountered in the application of U.S. and Japanese management in Singapore were identified and discussed by the study. General recommendations for the Singaporean manufacturing industry were then made based on the findings of the questionnaire survey and interview analysis.

Computer aided design and manufacture of form-rolls

Cold roll forming of thin-walled sections is a very useful process in the sheet metal industry. However, the conventional method for the design and manufacture of form-rolls, the special tooling used in the cold roll forming process, is a very time consuming and skill demanding exercise. This thesis describes the establishment of a stand-alone minicomputer based CAD/CAM system for assisting the design and manufacture of form-rolls. The work was undertaken in collaboration with a leading manufacturer of thin-walled sections. A package of computer programs have been developed to provide computer aids for every aspect of work in form-roll design and manufacture. The programs have been successfully implemented, as an integrated CAD/CAM software system, on the ICL PERQ minicomputer with graphics facilities. Thus, the developed CAD/CAM system is a single-user workstation, with software facilities to help the user to perform the conventional roll design activities including the design of the finished section, the flower pattern, and the form-rolls. A roll editor program can then be used to modify, if required, the computer generated roll profiles. As far as manufacturing is concerned, a special-purpose roll machining program and postprocessor can be used in conjunction to generate the NC control part-programs for the production of form-rolls by NC turning. Graphics facilities have been incorporated into the CAD/CAM software programs to display drawings interactively on the computer screen throughout all stages of execution of the CAD/CAM software. It has been found that computerisation can shorten the lead time in all activities dealing with the design and manufacture of form-rolls, and small or medium size manufacturing companies can gain benefits from the CAD/CM! technology by developing, according to its own specification, a tailor-made CAD/CAM software system on a low cost minicomputer.

Testing for market segmentation in the A and B share markets of China

Recent research has suggested that the A and B share markets of China may be informationally segmented. In this paper volatility patterns in the A and B share market are studied to establish whether volatility changes to the A and B share markets are synchronous. A consequence of new information, when investors act upon it is that volatility rises. This means that if the A and B markets are perfectly integrated volatility changes to each market would be expected to occur at the same time. However, if they are segmented there is no reason for volatility changes to occur on the same day. Using the iterative cumulative sum of squares across the different markets. Evidence is found of integration between the two A share markets but not between the A and B markets. © 2005 Taylor & Francis Group Ltd.

Computer aided design and manufacture for three dimensional milling

Advances in both computer technology and the necessary mathematical models capable of capturing the geometry of arbitarily shaped objects has led to the development in this thesis of a surface generation package called 'IBSCURF' aimed at providing a more economically viable solution to free-form surface manufacture. A suit of computer programs written in FORTRAN 77 has been developed to provide computer aids for every aspect of work in designing and machining free-form surfaces. A vector-valued parametric method was used for shape description and a lofting technique employed for the construction of the surface. The development of the package 'IBSCURF' consists of two phases. The first deals with CAD. The design process commences in defining the cross-sections which are represented by uniform B-spline curves as approximations to give polygons. The order of the curve and the position and number of the polygon vertices can be used as parameters for the modification to achieve the required curves. When the definitions of the sectional curves is complete, the surface is interpolated over them by cubic cardinal splines. To use the CAD function of the package to design a mould for a plastic handle, a mathematical model was developed. To facilitate the integration of design and machining using the mathematical representation of the surface, the second phase of the package is concerned with CAM which enables the generation of tool offset positions for ball-nosed cutters and a general post-processor has been developed which automatically generates NC tape programs for any CNC milling machine. The two phases of these programs have been successfully implemented, as a CAD/CAM package for free-form surfaces on the VAX 11/750 super-minicomputer with graphics facilities for displaying drawings interactively on the terminal screen. The development of this package has been beneficial in all aspects of design and machining of free form surfaces.

An investigation of the emerging system of host government participation in the international oil industry with particular reference to Libyan participation arrangements

This study has been conceived with the primary objective of identifying and evaluating the financial aspects of the transformation in country/company relations of the international oil industry from the traditional concessionary system to the system of governmental participation in the ownership and operation of oil concessions. The emphasis of the inquiry was placed on assembling a case study of the oil exploitation arrangements of Libya. Through a comprehensive review of the literature, the sociopolitical factors surrounding the international oil business were identified and examined in an attempt to see their influence on contractual arrangements and particularly to gauge the impact of any induced contractual changes on the revenue benefit accruing to the host country from its oil operations. Some comparative analyses were made in the study to examine the viability of the Libyan participation deals both as an investment proposal and as a system of conducting oil activities in the country. The analysis was carried out in the light of specific hypotheses to assess the relative impact of the participation scheme in comparison with the alternative concessionary model on the net revenue resulting to the government from oil operations and the relative effect on the level of research and development within the industry. A discounted cash flow analysis was conducted to measure inputs and outputs of the comparative models and judge their revenue benefits. Then an empirical analysis was carried out to detect any significant behavioural changes in the exploration and development effort associated with the different oil exploitation systems. Results of the investigation of revenues support the argument that the mere introduction of the participation system has not resulted in a significant revenue benefit to the host government. Though there has been a significant increase in government revenue, associated with the period following the emergence of the participation agreements, this increase was mainly due to socio-economic factors other than the participation scheme. At the same time the empirical results have shown an association of the participation scheme with a decline of the oil industry's research and development efforts.

Safety and health in mines: the rise of bureaucracy in the coal mining industry and its results as evidenced by the public enquiry into an accident at Houghton Main Colliery

This thesis is concerned with certain aspects of the Public Inquiry into the accident at Houghton Main Colliery in June 1975. It examines whether prior to the accident there existed at the Colliery a situation in which too much reliance was being placed upon state regulation and too Iittle upon personal responsibility. I study the phenomenon of state regulation. This is done (a) by analysis of selected writings on state regulation/intervention/interference/bureaucracy (the words are used synonymously) over the last two hundred years, specifically those of Marx on the 1866 Committee on Mines, and (b) by studying Chadwick and Tremenheere, leading and contrasting "bureaucrats" of the mid-nineteenth century. The bureaucratisation of the mining industry over the period 1835-1954 is described, and it is demonstrated that the industry obtained and now possesses those characteristics outlined by Max Weber in his model of bureaucracy. I analyse criticisms of the model and find them to be relevant, in that they facilitate understanding both of the circumstances of the accident and of the Inquiry . Further understanding of the circumstances and causes of the accident was gained by attendance at the lnquiry and by interviewing many of those involved in the Inquiry. I analyse many aspects of the Inquiry - its objectives. structure, procedure and conflicting interests - and find that, although the Inquiry had many of the symbols of bureaucracy, it suffered not from " too much" outside interference. but rather from the coal mining industry's shared belief in its ability to solve its own problems. I found nothing to suggest that, prior to the accident, colliery personnel relied. or were encouraged to rely, "too much" upon state regulation.

An exploration of policies and practices used to showcase production facilities

Manufacturers who seek innovative ways in which to differentiate their products and services should not overlook the value of showcasing their production facilities. By careful design, visitors can be exposed to a series of experiences that can help to emphasize the value built into products. This topic has, however, received almost no attention by manufacturing researchers. Therefore, this paper describes a study of six manufacturers and, from this, proposes a set of guidelines for showcasing production facilities. Although exploratory, this work provides both a guide to manufacturers and a platform for more in-depth research. The guidelines and the case studies on which they are based are all described within the paper.

Measuring business growth:high-growth firms and their contribution to employment in the UK

The Measuring Business Growth report is a comprehensive look at UK business growth over the past decade. It makes a powerful case that a small number of high-growth businesses are responsible for the lion's share of job creation and prosperity. It is the counterpart to Business Growth and Innovation, which considers the wider benefits of growth businesses, their socio-economic impact, and the relationship between growth and innovation. This has significant implications for the direction of economic policy. It suggests that focusing attention on growing businesses and promoting excellence, far from being an elitist policy, gives rise to widespread job creation and prosperity.

Rethinking policy options for industry:Appropriateness of policies for industry and UK farming and food

Purpose - Studies the implementation of lean supply and partnership relationships in the UK food and farming industry to assess if these types of interventions are effective. Design/methodology/approach - Reviews the challenges affecting the UK supply chain for red meat. Describes the initiatives that were set up to develop a lean supply chain management approach and examines their application in the UK pig and beef industries. Assesses if these changes benefited all participants in the supply chains. Uses semi-structured interviews with key actors in each stage of the supply chain to do this, identifying the power relations within the supply chains and how these affected the outcomes for those participating in the chain. Findings - Concludes that lean initiatives were appropriate for the pig industry but were of limited value for the beef industry. Even within the pig industry, highlights that benefits were not shared equally, with producers, in particular, losing out. Lastly, points out that lean supply chain management is unlikely to be appropriate operationally and commercially in all circumstances in one industry. Argues for a differentiated policy approach and sets out a framework which enables decision makers to select industrial policy options. Research limitations/ implications - Describes the analysis and the framework developed from it. Originality/value - Assesses the effectiveness of lean supply chain management.

Stock repurchases and treasury share sales:do they stabilize price and enhance liquidity?

Can companies reduce the volatility and increase the liquidity of their stocks by trading them? In the context of the Italian stock market, where companies have far more leeway to sell as well as buy their own stocks than in the U.S., the answer is yes. We examine the effects of trading (open-market share repurchases and treasury shares sales) on liquidity (bid–ask spread) and volatility (return variance). Further, we examine the impact of shareholder approvals of repurchase programs on liquidity and volatility. We find clear evidence that trading increases liquidity and reduces volatility. These results are consistent with our analysis of the motives Italian companies give for making share repurchases.

Exploring value-added applications of RFID systems in industry and service sectors

Radio-frequency identification technology (RFID) is a popular modern technology proven to deliver a range of value-added benefits to achieve system and operational efficiency, as well as cost-effectiveness. The operational characteristics of RFID outperform barcodes in many aspects. One of the main challenges for RFID adoption is proving its ability to improve competitiveness. In this paper, we examine multiple real-world examples where RFID technology has been demonstrated to provide significant benefits to industry competitiveness, and also to enhance human experience in the service sector. This paper will explore and survey existing value-added applications of RFID systems in industry and the service sector, with particular focus on applications in retail, logistics, manufacturing, healthcare, leisure and the public sector. © 2012 AICIT.

An investigation of management accounting control systems in the palm oil industry:a sociomaterial approach to practice change

The primary aim of this research is to understand what constitutes management accounting and control (MACs) practice and how these control processes are implicated in the day to day work practices and operations of the organisation. It also examines the changes that happen in MACs practices over time as multiple actors within organisational settings interact with each other. I adopt a distinctive practice theory approach (i.e. sociomateriality) and the concept of imbrication in this research to show that MACs practices emerge from the entanglement between human/social agency and material/technological agency within an organisation. Changes in the pattern of MACs practices happens in imbrication processes which are produced as the two agencies entangle. The theoretical approach employed in this research offers an interesting and valuable lens which seeks to reveal the depth of these interactions and uncover the way in which the social and material imbricate. The theoretical framework helps to reveal how these constructions impact on and produce modifications of MACs practices. The exploration of the control practices at different hierarchical levels (i.e. from the operational to middle management and senior level management) using the concept of imbrication process also maps the dynamic flow of controls from operational to top management and vice versa in the organisation. The empirical data which is the focus of this research has been gathered from a case study of an organisation involved in a large vertically integrated palm oil industry company in Malaysia specifically the refinery sector. The palm oil industry is a significant industry in Malaysia as it contributed an average of 4.5% of Malaysian Gross Domestic Product, over the period 1990 -2010. The Malaysian palm oil industry also has a significant presence in global food oil supply where it contributed 26% of the total oils and fats global trade in 2010. The case organisation is a significant contributor to the Malaysian palm oil industry. The research access has provided an interesting opportunity to explore the interactions between different groups of people and material/technology in a relatively heavy process food industry setting. My research examines how these interactions shape and are shaped by control practices in a dynamic cycle of imbrications over both short and medium time periods.

Excipient characterization and particle engineering to develop directly compressed orally disintegrating tablets

ODTs have emerged as a novel oral dosage form with a potential to deliver a wide range of drug candidates to paediatric and geriatric patients. Compression of excipients offers a costeffective and translatable methodology for the manufacture of ODTs. Though, technical challenges prevail such as difficulty to achieve suitable tablet mechanical strength while ensuring rapid disintegration in the mouth, poor compressibility of preferred ODT diluent Dmannitol, and limited use for modified drug-release. The work investigates excipients’ functionality in ODTs and proposes new methodologies for enhancing material characteristics via process and particle engineering. It also aims to expand ODT applications for modified drug-release. Preformulation and formulation studies employed a plethora of techniques/tests including AFM, SEM, DSC, XRD, TGA, HSM, FTIR, hardness, disintegration time, friability, stress/strain and Heckel analysis. Tableting of D-mannitol and cellulosic excipients utilised various compression forces, material concentrations and grades. Engineered D-mannitol particles were made by spray drying mannitol with pore former NH4HCO3. Coated microparticles of model API omeprazole were prepared using water-based film forming polymers. The results of nanoscopic investigations elucidated the compression profiles of ODT excipients. Strong densification of MCC (Py is 625 MPa) occurs due to conglomeration of physicomechanical factors whereas D-mannitol fragments under pressure leading to poor compacts. Addition of cellulosic excipients (L-HPC and HPMC) and granular mannitol to powder mannitol was required to mechanically strengthen the dosage form (hardness >60 N, friability <1%) and to maintain rapid disintegration (<30 sec). Similarly, functionality was integrated into D-mannitol by fabrication of porous, yet, resilient particles which resulted in upto 150% increase in the hardness of compacts. The formulated particles provided resistance to fracture under pressure due to inherent elasticity while promoted tablet disintegration (50-77% reduction in disintegration time) due to porous nature. Additionally, coated microparticles provided an ODT-appropriate modified-release coating strategy by preventing drug (omeprazole) release.