Auditory stream segregation of tone sequences in cochlear implant listeners

Previous claims that auditory stream segregation occurs in cochlear implant listeners are based on limited evidence. In experiment 1, eight listeners heard tones presented in a 30-s repeating ABA-sequence, with frequencies matching the centre frequencies of the implant's 22 electrodes. Tone A always stimulated electrode 11 (centre of the array); tone B stimulated one of the others. Tone repetition times (TRTs) from 50 to 200 ms were used. Listeners reported when they heard one or two streams. The proportion of time that each sequence was reported as segregated was consistently greater with increased electrode separation. However, TRT had no significant effect, and the perceptual reversals typical of normal-hearing listeners rarely occurred. The results may reflect channel discrimination rather than stream segregation. In experiment 2, six listeners performed a pitch-ranking task using tone pairs (reference = electrode 11). Listeners reported which tone was higher in pitch (or brighter in timbre) and their confidence in the pitch judgement. Similarities were observed in the individual pattern of results for reported segregation and pitch discrimination. Many implant listeners may show little or no sign of automatic stream segregation owing to the reduced perceptual space within which sounds can differ from one another. © 2006 Elsevier B.V. All rights reserved.

Auditory stream segregation in cochlear implant listeners:measures based on temporal discrimination and interleaved melody recognition

The evidence that cochlear implant listeners routinely experience stream segregation is limited and equivocal. Streaming in these listeners was explored using tone sequences matched to the center frequencies of the implant’s 22 electrodes. Experiment 1 measured temporal discrimination for short (ABA triplet) and longer (12 AB cycles) sequences (tone/silence durations = 60/40 ms). Tone A stimulated electrode 11; tone B stimulated one of 14 electrodes. On each trial, one sequence remained isochronous, and tone B was delayed in the other; listeners had to identify the anisochronous interval. The delay was introduced in the second half of the longer sequences. Prior build-up of streaming should cause thresholds to rise more steeply with increasing electrode separation, but no interaction with sequence length was found. Experiment 2 required listeners to identify which of two target sequences was present when interleaved with distractors (tone/silence durations = 120/80 ms). Accuracy was high for isolated targets, but most listeners performed near chance when loudness-matched distractors were added, even when remote from the target. Only a substantial reduction in distractor level improved performance, and this effect did not interact with target-distractor separation. These results indicate that implantees often do not achieve stream segregation, even in relatively unchallenging tasks.

Simultaneous grouping in cochlear implant listeners:can abrupt changes in level be used to segregate components from a complex tone?

A sudden increase in the amplitude of a component often causes its segregation from a complex tone, and shorter rise times enhance this effect. We explored whether this also occurs in implant listeners (n?=?8). Condition 1 used a 3.5-s “complex tone” comprising concurrent stimulation on five electrodes distributed across the array of the Nucleus CI24 implant. For each listener, the baseline stimulus level on each electrode was set at 50% of the dynamic range (DR). Two 1-s increments of 12.5%, 25%, or 50% DR were introduced in succession on adjacent electrodes within the “inner” three of those activated. Both increments had rise and fall times of 30 and 970 ms or vice versa. Listeners reported which increment was higher in pitch. Some listeners performed above chance for all increment sizes, but only for 50% increments did all listeners perform above chance. No significant effect of rise time was found. Condition 2 replaced amplitude increments with decrements. Only three listeners performed above chance even for 50% decrements. One exceptional listener performed well for 50% decrements with fall and rise times of 970 and 30 ms but around chance for fall and rise times of 30 and 970 ms, indicating successful discrimination based on a sudden rise back to baseline stimulation. Overall, the results suggest that implant listeners can use amplitude changes against a constant background to pick out components from a complex, but generally these must be large compared with those required in normal hearing. For increments, performance depended mainly on above-baseline stimulation of the target electrodes, not rise time. With one exception, performance for decrements was typically very poor.

A configuration framework of manufacturing strategy paradigm in state owned enterprises within China's petrochemical industry:building context-embedded configurations for the paradigm of strategic manufacturing management from exploratory case studies

The role of the production system as a key determinant of competitive performance of business operations- has long been the subject of industrial organization research, even predating the .explicit conceptua1isation of manufacturing, strategy in the literature. Particular emergent production issues such as the globalisation of production, global supply chain management, management of integrated manufacturing and a growing e~busjness environment are expected to critically influence the overall competitive performance and therefore the strategic success of the organization. More than ever, there is a critical need to configure and improve production system and operations competence in a strategic way so as to contribute to the long-term competitiveness of the organization. In order to operate competitively and profitably, manufacturing companies, no matter how well managed, all need a long-term 'strategic direction' for the development of operations competence in order to consistently produce more market value with less cost towards a leadership position. As to the long-term competitiveness, it is more important to establish a dynamic 'strategic perspective' for continuous operational improvements in pursuit of this direction, as well as ongoing reviews of the direction in relation to the overall operating context. However, it also clear that the 'existing paradigm of manufacturing strategy development' is incapable of adequately responding to the increasing complexities and variations of contemporary business operations. This has been factually reflected as many manufacturing companies are finding that methodologies advocated in the existing paradigm for developing manufacturing strategy have very limited scale and scope for contextual contingency in empirical application. More importantly, there has also emerged a deficiency in the multidimensional and integrative profile from a theoretical perspective when operationalising the underlying concept of strategic manufacturing management established in the literature. The point of departure for this study was a recognition of such contextual and unitary limitations in the existing paradigm of manufacturing strategy development when applied to contemporary industrial organizations in general, and Chinese State Owned Enterprises (SOEs) in particular. As China gradually becomes integrated into the world economy, the relevance of Western management theory and its paradigm becomes a practical matter as much as a theoretical issue. Since China markedly differs from Western countries in terms of culture, society, and political and economic systems, it presents promising grounds to test and refine existing management theories and paradigms with greater contextual contingency and wider theoretical perspective. Under China's ongoing programmes of SOE reform, there has been an increased recognition that strategy development is the very essence of the management task for managers of manufacturing companies in the same way as it is for their counterparts in Western economies. However, the Western paradigm often displays a rather naive and unitary perspective of the nature of strategic management decision-making, one which largely overlooks context-embedded factors and social/political influences on the development of manufacturing strategy. This thesis studies the successful experiences of developing manufacturing strategy from five high-performing large-scale SOEs within China’s petrochemical industry. China’s petrochemical industry constitutes a basic heavy industrial sector, which has always been a strategic focus for reform and development by the Chinese government. Using a confirmation approach, the study has focused on exploring and conceptualising the empirical paradigm of manufacturing strategy development practiced by management. That is examining the ‘empirical specifics’ and surfacing the ‘managerial perceptions’ of content configuration, context of consideration, and process organization for developing a manufacturing strategy during the practice. The research investigation adopts a qualitative exploratory case study methodology with a semi-structural front-end research design. Data collection follows a longitudinal and multiple-case design and triangulates case evidence from sources including qualitative interviews, direct observation, and a search of documentations and archival records. Data analysis follows an investigative progression from a within-case preliminary interpretation of facts to a cross-case search for patterns through theoretical comparison and analytical generalization. The underlying conceptions in both the literature of manufacturing strategy and related studies in business strategy were used to develop theoretical framework and analytical templates applied during data collection and analysis. The thesis makes both empirical and theoretical contributions to our understanding of 'contemporary management paradigm of manufacturing strategy development'. First, it provides a valuable contextual contingency of the 'subject' using the business setting of China's SOEs in petrochemical industry. This has been unpacked into empirical configurations developed for its context of consideration, its content and process respectively. Of special note, a lean paradigm of business operations and production management discovered at case companies has significant implications as an emerging alternative for high-volume capital intensive state manufacturing in China. Second, it provides a multidimensional and integrative theoretical profile of the 'subject' based upon managerial perspectives conceptualised at case companies when operationalising manufacturing strategy. This has been unpacked into conceptual frameworks developed for its context of consideration, its content constructs, and its process patterns respectively. Notably, a synergies perspective towards the operating context, competitive priorities and competence development of business operations and production management has significant implications for implementing a lean manufacturing paradigm. As a whole, in so doing, the thesis established a theoretical platform for future refinement and development of context-specific methodologies for developing manufacturing strategy.

Auditory grouping in cochlear implant listeners

This thesis describes a series of experiments investigating both sequential and concurrent auditory grouping in implant listeners. Some grouping cues used by normal-hearing listeners should also be available to implant listeners, while others (e.g. fundamental frequency) are unlikely to be useful. As poor spectral resolution may also limit implant listeners’ performance, the spread of excitation in the cochlea was assessed using Neural Response Telemetry (NRT) and the results were related to those of the perceptual tasks. Experiment 1 evaluated sequential segregation of alternating tone sequences; no effect of rate or evidence of perceptual ambiguity was found, suggesting that automatic stream segregation had not occurred. Experiment 2 was an electrode pitch-ranking task; some relationship was found between pitch-ranking judgements (especially confidence scores) and reported segregation. Experiment 3 used a temporal discrimination task; this also failed to provide evidence of automatic stream segregation, because no interaction was found between the effects of sequence length and electrode separation. Experiment 4 explored schema-based grouping using interleaved melody discrimination; listeners were not able to segregate targets and distractors based on pitch differences, unless accompanied by substantial level differences. Experiment 5 evaluated concurrent segregation in a task requiring the detection of level changes in individual components of a complex tone. Generally, large changes were needed and abrupt changes were no easier to detect than gradual ones. In experiment 6, NRT testing confirmed substantially overlapping simulation by intracochlear electrodes. Overall, little or no evidence of auditory grouping by implant listeners was found.

Stochastic beamforming for cochlear implant coding

Cochlear implants are prosthetic devices used to provide hearing to people who would otherwise be profoundly deaf. The deliberate addition of noise to the electrode signals could increase the amount of information transmitted, but standard cochlear implants do not replicate the noise characteristic of normal hearing because if noise is added in an uncontrolled manner with a limited number of electrodes then it will almost certainly lead to worse performance. Only if partially independent stochastic activity can be achieved in each nerve fibre can mechanisms like suprathreshold stochastic resonance be effective. We are investigating the use of stochastic beamforming to achieve greater independence. The strategy involves presenting each electrode with a linear combination of independent Gaussian noise sources. Because the cochlea is filled with conductive salt solutions, the noise currents from the electrodes interact and the effective stimulus for each nerve fibre will therefore be a different weighted sum of the noise sources. To some extent therefore, the effective stimulus for a nerve fibre will be independent of the effective stimulus of neighbouring fibres. For a particular patient, the electrode position and the amount of current spread are fixed. The objective is therefore to find the linear combination of noise sources that leads to the greatest independence between nerve discharges. In this theoretical study we show that it is possible to get one independent point of excitation (one null) for each electrode and that stochastic beamforming can greatly decrease the correlation between the noise exciting different regions of the cochlea. © 2007 Copyright SPIE - The International Society for Optical Engineering.

Nonlinearity compensation in multi-rate 28 Gbaud WDM systems employing optical and digital techniques under diverse link configurations

Digital back-propagation (DBP) has recently been proposed for the comprehensive compensation of channel nonlinearities in optical communication systems. While DBP is attractive for its flexibility and performance, it poses significant challenges in terms of computational complexity. Alternatively, phase conjugation or spectral inversion has previously been employed to mitigate nonlinear fibre impairments. Though spectral inversion is relatively straightforward to implement in optical or electrical domain, it requires precise positioning and symmetrised link power profile in order to avail the full benefit. In this paper, we directly compare ideal and low-precision single-channel DBP with single-channel spectral-inversion both with and without symmetry correction via dispersive chirping. We demonstrate that for all the dispersion maps studied, spectral inversion approaches the performance of ideal DBP with 40 steps per span and exceeds the performance of electronic dispersion compensation by ~3.5 dB in Q-factor, enabling up to 96% reduction in complexity in terms of required DBP stages, relative to low precision one step per span based DBP. For maps where quasi-phase matching is a significant issue, spectral inversion significantly outperforms ideal DBP by ~3 dB.

Comparison of configurations for high-recovery inland desalination systems

Desalination of brackish groundwater (BW) is an effective approach to augment water supply, especially for inland regions that are far from seawater resources. Brackish water reverse osmosis (BWRO) desalination is still subject to intensive energy consumption compared to the theoretical minimum energy demand. Here, we review some of the BWRO plants with various system arrangements. We look at how to minimize energy demands, as these contribute considerably to the cost of desalinated water. Different configurations of BWRO system have been compared from the view point of normalized specific energy consumption (SEC). Analysis is made at theoretical limits. The SEC reduction of BWRO can be achieved by (i) increasing number of stages, (ii) using an energy recovery device (ERD), or (iii) operating the BWRO in batch mode or closed circuit mode. Application of more stages not only reduces SEC but also improves water recovery. However, this improvement is less pronounced when the number of stages exceeds four. Alternatively and more favourably, the BWRO system can be operated in Closed Circuit Desalination (CCD) mode and gives a comparative SEC to that of the 3-stage system with a recovery ratio of 80%. A further reduction of about 30% in SEC can be achieved through batch-RO operation. Moreover, the costly ERDs and booster pumps are avoided with both CCD and batch-RO, thus furthering the effectiveness of lowering the costs of these innovative approaches. © 2012 by the authors.

Institutions and social entrepreneurship:the role of institutional voids, institutional support, and institutional configurations

We develop the institutional configuration perspective to understand which national contexts facilitate social entrepreneurship (SE). We confirm joint effects on SE of formal regulatory (government activism), informal cognitive (postmaterialist cultural values), and informal normative (socially supportive cultural norms, or weak-tie social capital) institutions in a multilevel study of 106,484 individuals in 26 nations. We test opposing propositions from the institutional void and institutional support perspectives. Our results underscore the importance of resource support from both formal and informal institutions, and highlight motivational supply side influences on SE. They advocate greater consideration of institutional configurations in institutional theory and comparative entrepreneurship research.

The effect of Gaussian noise on the threshold, dynamic range, and loudness of analogue cochlear implant stimuli

The deliberate addition of Gaussian noise to cochlear implant signals has previously been proposed to enhance the time coding of signals by the cochlear nerve. Potentially, the addition of an inaudible level of noise could also have secondary benefits: it could lower the threshold to the information-bearing signal, and by desynchronization of nerve discharges, it could increase the level at which the information-bearing signal becomes uncomfortable. Both these effects would lead to an increased dynamic range, which might be expected to enhance speech comprehension and make the choice of cochlear implant compression parameters less critical (as with a wider dynamic range, small changes in the parameters would have less effect on loudness). The hypothesized secondary effects were investigated with eight users of the Clarion cochlear implant; the stimulation was analogue and monopolar. For presentations in noise, noise at 95% of the threshold level was applied simultaneously and independently to all the electrodes. The noise was found in two-alternative forced-choice (2AFC) experiments to decrease the threshold to sinusoidal stimuli (100 Hz, 1 kHz, 5 kHz) by about 2.0 dB and increase the dynamic range by 0.7 dB. Furthermore, in 2AFC loudness balance experiments, noise was found to decrease the loudness of moderate to intense stimuli. This suggests that loudness is partially coded by the degree of phase-locking of cochlear nerve fibers. The overall gain in dynamic range was modest, and more complex noise strategies, for example, using inhibition between the noise sources, may be required to get a clinically useful benefit. © 2006 Association for Research in Otolaryngology.

Failure mechanism of the all-polyethylene glenoid implant

Fixation failure of glenoid components is the main cause of unsuccessful total shoulder arthroplasties. The characteristics of these failures are still not well understood, hence, attempts at improving the implant fixation are somewhat blind and the failure rate remains high. This lack of understanding is largely due to the fundamental problem that direct observations of failure are impossible as the fixation is inherently embedded within the bone. Twenty custom made implants, reflecting various common fixation designs, and a specimen set-up was prepared to enable direct observation of failure when the specimens were exposed to cyclic superior loads during laboratory experiments. Finite element analyses of the laboratory tests were also carried out to explain the observed failure scenarios. All implants, irrespective of the particular fixation design, failed at the implant-cement interface and failure initiated at the inferior part of the component fixation. Finite element analyses indicated that this failure scenario was caused by a weak and brittle implant-cement interface and tensile stresses in the inferior region possibly worsened by a stress raiser effect at the inferior rim. The results of this study indicate that glenoid failure can be delayed or prevented by improving the implant/cement interface strength. Also any design features that reduce the geometrical stress raiser and the inferior tensile stresses in general should delay implant loosening.