2D-3D registration of CT vertebra volume to fluoroscopy projection:a calibration model assessment

This study extends a previous research concerning intervertebral motion registration by means of 2D dynamic fluoroscopy to obtain a more comprehensive 3D description of vertebral kinematics. The problem of estimating the 3D rigid pose of a CT volume of a vertebra from its 2D X-ray fluoroscopy projection is addressed. 2D-3D registration is obtained maximising a measure of similarity between Digitally Reconstructed Radiographs (obtained from the CT volume) and real fluoroscopic projection. X-ray energy correction was performed. To assess the method a calibration model was realised a sheep dry vertebra was rigidly fixed to a frame of reference including metallic markers. Accurate measurement of 3D orientation was obtained via single-camera calibration of the markers and held as true 3D vertebra position; then, vertebra 3D pose was estimated and results compared. Error analysis revealed accuracy of the order of 0.1 degree for the rotation angles of about 1mm for displacements parallel to the fluoroscopic plane, and of order of 10mm for the orthogonal displacement. © 2010 P. Bifulco et al.

The development of a regional energy assessment model

Shropshire Energy Team initiated this study to examine consumption and associated emissions in the predominantly rural county of Shropshire. Current use of energy is not sustainable in the long term and there are various approaches to dealing with the environmental problems it creates. Energy planning by a local authority for a sustainable future requires detailed energy consumption and environmental information. This information would enable target setting and the implementation of policies designed to encourage energy efficiency improvements and exploitation of renewable energy resources. This could aid regeneration strategies by providing new employment opportunities. Associated reductions in carbon dioxide and other emissions would help to meet national and international environmental targets. In the absence of this detailed information, the objective was to develop a methodology to assess energy consumption and emissions on a regional basis from 1990 onwards for all local planning authorities. This would enable a more accurate assessment of the relevant issues, such that plans are more appropriate and longer lasting. A first comprehensive set of data has been gathered from a wide range of sources and a strong correlation was found between population and energy consumption for a variety of regions across the UK. In this case the methodology was applied to the county of Shropshire to give, for the first time, estimates of primary fuel consumption, electricity consumption and associated emissions in Shropshire for 1990 to 2025. The estimates provide a suitable baseline for assessing the potential contribution renewable energy could play in meeting electricity demand in the country and in reducing emissions. The assessment indicated that in 1990 total primary fuel consumption was 63,518,018 GJ/y increasing to 119,956,465 GJ/y by 2025. This is associated with emissions of 1,129,626 t/y of carbon in 1990 rising to 1,303,282 t/y by 2025. In 1990, 22,565,713 GJ/y of the primary fuel consumption was used for generating electricity rising to 23,478,050 GJ/y in 2025. If targets to reduce primary fuel consumption are reached, then emissions of carbon would fall to 1,042,626 by 2025, if renewable energy targets were also reached then emissions of carbon would fall to 988,638 t/y by 2025.

Representing the assessment process for psychodynamic psychotherapy within a computerized model of human classification

This research describes a computerized model of human classification which has been constructed to represent the process by which assessments are made for psychodynamic psychotherapy. The model assigns membership grades (MGs) to clients so that the most suitable ones have high values in the therapy category. Categories consist of a hierarchy of components, one of which, ego strength, is analysed in detail to demonstrate the way it has captured the psychotherapist's knowledge. The bottom of the hierarchy represents the measurable factors being assessed during an interview. A questionnaire was created to gather the identified information and was completed by the psychotherapist after each assessment. The results were fed into the computerized model, demonstrating a high correlation between the model MGs and the suitability ratings of the psychotherapist (r = .825 for 24 clients). The model has successfully identified the relevant data involved in assessment and simulated the decision-making process of the expert. Its cognitive validity enables decisions to be explained, which means that it has potential for therapist training and also for enhancing the referral process, with benefits in cost effectiveness as well as in the reduction of trauma to clients. An adapted version measuring client improvement would give quantitative evidence for the benefit of therapy, thereby supporting auditing and accountability. © 1997 The British Psychological Society.

An integrated assessment model for cross-country pipelines

The cross-country petroleum pipelines are environmentally sensitive because they traverse through varied terrain covering crop fields, forests, rivers, populated areas, desert, hills and offshore. Any malfunction of these pipelines may cause devastating effect on the environment. Hence, the pipeline operators plan and design pipelines projects with sufficient consideration of environment and social aspects along with the technological alternatives. Traditionally, in project appraisal, optimum technical alternative is selected using financial analysis. Impact assessments (IA) are then carried out to justify the selection and subsequent statutory approval. However, the IAs often suggest alternative sites and/or alternate technology and implementation methodology, resulting in revision of entire technical and financial analysis. This study addresses the above issues by developing an integrated framework for project feasibility analysis with the application of analytic hierarchy process (AHP), a multiple attribute decision-making technique. The model considers technical analysis (TA), socioeconomic IA (SEIA) and environmental IA (EIA) in an integrated framework to select the best project from a few alternative feasible projects. Subsequent financial analysis then justifies the selection. The entire methodology has been explained here through a case application on cross-country petroleum pipeline project in India.

Model and performance of a no-reference quality assessment metric for video streaming

Video streaming via Transmission Control Protocol (TCP) networks has become a popular and highly demanded service, but its quality assessment in both objective and subjective terms has not been properly addressed. In this paper, based on statistical analysis a full analytic model of a no-reference objective metric, namely pause intensity (PI), for video quality assessment is presented. The model characterizes the video playout buffer behavior in connection with the network performance (throughput) and the video playout rate. This allows for instant quality measurement and control without requiring a reference video. PI specifically addresses the need for assessing the quality issue in terms of the continuity in the playout of TCP streaming videos, which cannot be properly measured by other objective metrics such as peak signal-to-noise-ratio, structural similarity, and buffer underrun or pause frequency. The performance of the analytical model is rigidly verified by simulation results and subjective tests using a range of video clips. It is demonstrated that PI is closely correlated with viewers' opinion scores regardless of the vastly different composition of individual elements, such as pause duration and pause frequency which jointly constitute this new quality metric. It is also shown that the correlation performance of PI is consistent and content independent. © 2013 IEEE.

Development of a technological innovation capability assessment model:a case study of manufacturing SMEs in Sialkot, Pakistan

Small and Medium Enterprises (SMEs) play an important part in the economy of any country. Initially, a flat management hierarchy, quick response to market changes and cost competitiveness were seen as the competitive characteristics of an SME. Recently, in developed economies, technological capabilities (TCs) management- managing existing and developing or assimilating new technological capabilities for continuous process and product innovations, has become important for both large organisations and SMEs to achieve sustained competitiveness. Therefore, various technological innovation capability (TIC) models have been developed at firm level to assess firms‘ innovation capability level. These models output help policy makers and firm managers to devise policies for deepening a firm‘s technical knowledge generation, acquisition and exploitation capabilities for sustained technological competitive edge. However, in developing countries TCs management is more of TCs upgrading: acquisitions of TCs from abroad, and then assimilating, innovating and exploiting them. Most of the TIC models for developing countries delineate the level of TIC required as firms move from the acquisition to innovative level. However, these models do not provide tools for assessing the existing level of TIC of a firm and various factors affecting TIC, to help practical interventions for TCs upgrading of firms for improved or new processes and products. Recently, the Government of Pakistan (GOP) has realised the importance of TCs upgrading in SMEs-especially export-oriented, for their sustained competitiveness. The GOP has launched various initiatives with local and foreign assistance to identify ways and means of upgrading local SMEs capabilities. This research targets this gap and developed a TICs assessment model for identifying the existing level of TIC of manufacturing SMEs existing in clusters in Sialkot, Pakistan. SME executives in three different export-oriented clusters at Sialkot were interviewed to analyse technological capabilities development initiatives (CDIs) taken by them to develop and upgrade their firms‘ TCs. Data analysed at CDI, firm, cluster and cross-cluster level first helped classify interviewed firms as leader, follower and reactor, with leader firms claiming to introduce mostly new CDIs to their cluster. Second, the data analysis displayed that mostly interviewed leader firms exhibited ‗learning by interacting‘ and ‗learning by training‘ capabilities for expertise acquisition from customers and international consultants. However, these leader firms did not show much evidence of learning by using, reverse engineering and R&D capabilities, which according to the extant literature are necessary for upgrading existing TIC level and thus TCs of firm for better value-added processes and products. The research results are supported by extant literature on Sialkot clusters. Thus, in sum, a TIC assessment model was developed in this research which qualitatively identified interviewed firms‘ TIC levels, the factors affecting them, and is validated by existing literature on interviewed Sialkot clusters. Further, the research gives policy level recommendations for TIC and thus TCs upgrading at firm and cluster level for targeting better value-added markets.