High efficiency SiC AC chopper for LV networks

A proposal to increase the existing residential LV grid voltage from 230 V has been made in order to increase existing network capacity. A power-electronic AC-AC converter is then used to provide 230 V at each property. Several constraints such as temperature rise at the converter location lead to a converter design requiring very high efficiency. In this paper results from a recent feasibility study in terms of LV network capacity increase are presented along with the design and testing of a SiC based 1 kW, AC/AC prototype module, which forms the basis of a much larger 15 kW multi-module converter.

Power electronic interfaces for low voltage residential networks

A proposal to increase the existing residential LV grid voltage from 230 V to 300 V has been made in order to increase existing network capacity. A power-electronic AC-AC converter is then used to provide 230 V at each property. The equipment can also provide power-quality improvements to the network and load. Several constraints such as temperature rise at the converter location lead to a converter design requiring very high efficiency. In this paper different AC/AC converter topologies are presented which compares the power quality benefits, size and efficiency of each converter. The design and the control technique of the most suitable topology are verified using simulation and preliminary experimentally results of prototype hardware are also included. © 2013 IEEE.

A low mortality, high morbidity Reduced Intensity Status Epilepticus (RISE) model of epilepsy and epileptogenesis in the rat

Animal models of acquired epilepsies aim to provide researchers with tools for use in understanding the processes underlying the acquisition, development and establishment of the disorder. Typically, following a systemic or local insult, vulnerable brain regions undergo a process leading to the development, over time, of spontaneous recurrent seizures. Many such models make use of a period of intense seizure activity or status epilepticus, and this may be associated with high mortality and/or global damage to large areas of the brain. These undesirable elements have driven improvements in the design of chronic epilepsy models, for example the lithium-pilocarpine epileptogenesis model. Here, we present an optimised model of chronic epilepsy that reduces mortality to 1% whilst retaining features of high epileptogenicity and development of spontaneous seizures. Using local field potential recordings from hippocampus in vitro as a probe, we show that the model does not result in significant loss of neuronal network function in area CA3 and, instead, subtle alterations in network dynamics appear during a process of epileptogenesis, which eventually leads to a chronic seizure state. The model’s features of very low mortality and high morbidity in the absence of global neuronal damage offer the chance to explore the processes underlying epileptogenesis in detail, in a population of animals not defined by their resistance to seizures, whilst acknowledging and being driven by the 3Rs (Replacement, Refinement and Reduction of animal use in scientific procedures) principles.

Marking high-technology market evolution through the foci of market stories:the case of local area networks

Previous research suggests that changing consumer and producer knowledge structures play a role in market evolution and that the sociocognitive processes of product markets are revealed in the sensemaking stories of market actors that are rebroadcasted in commercial publications. In this article, the authors lend further support to the story-based nature of market sensemaking and the use of the sociocognitive approach in explaining the evolution of high-technology markets. They examine the content (i.e., subject matter or topic) and volume (i.e., the number) of market stories and the extent to which content and volume of market stories evolve as a technology emerges. Data were obtained from a content analysis of 10,412 article abstracts, published in key trade journals, pertaining to Local Area Network (LAN) technologies and spanning the period 1981 to 2000. Hypotheses concerning the evolving nature (content and volume) of market stories in technology evolution are tested. The analysis identified four categories of market stories - technical, product availability, product adoption, and product discontinuation. The findings show that the emerging technology passes initially through a 'technical-intensive' phase whereby technology related stories dominate, through a 'supply-push' phase, in which stories presenting products embracing the technology tend to exceed technical stories while there is a rise in the number of product adoption reference stories, to a 'product-focus' phase, with stories predominantly focusing on product availability. Overall story volume declines when a technology matures as the need for sensemaking reduces. When stories about product discontinuation surface, these signal the decline of current technology. New technologies that fail to maintain the 'product-focus' stage also reflect limited market acceptance. The article also discusses the theoretical and managerial implications of the study's findings. © 2002 Elsevier Science Inc. All rights reserved.

The role of organoclay in promoting co-continuous morphology in high-density poly(ethylene)/poly(amide) 6 blends

The effect of organically modified clay on the morphology, rheology and mechanical properties of high-density polyethylene (HDPE) and polyamide 6 (PA6) blends (HDPE/PA6 = 75/25 parts) is studied. Virgin and filled blends were prepared by melt compounding the constituents using a twin-screw extruder. The influence of the organoclay on the morphology of the hybrid was deeply investigated by means of wide-angle X-ray diffractometry, transmission and scanning electron microscopies and quantitative extraction experiments. It has been found that the organoclay exclusively places inside the more hydrophilic polyamide phase during the melt compounding. The extrusion process promotes the formation of highly elongated and separated organoclay-rich PA6 domains. Despite its low volume fraction, the filled minor phase eventually merges once the extruded pellets are melted again, giving rise to a co-continuous microstructure. Remarkably, such a morphology persists for long time in the melt state. A possible compatibilizing action related to the organoclay has been investigated by comparing the morphology of the hybrid blend with that of a blend compatibilized using an ethylene–acrylic acid (EAA) copolymer as a compatibilizer precursor. The former remains phase separated, indicating that the filler does not promote the enhancement of the interfacial adhesion. The macroscopic properties of the hybrid blend were interpreted in the light of its morphology. The melt state dynamics of the materials were probed by means of linear viscoelastic measurements. Many peculiar rheological features of polymer-layered silicate nanocomposites based on single polymer matrix were detected for the hybrid blend. The results have been interpreted proposing the existence of two distinct populations of dynamical species: HDPE not interacting with the filler, and a slower species, constituted by the organoclay-rich polyamide phase, which slackened dynamics stabilize the morphology in the melt state. In the solid state, both the reinforcement effect of the filler and the co-continuous microstructure promote the enhancement of the tensile modulus. Our results demonstrate that adding nanoparticles to polymer blends allows tailoring the final properties of the hybrid, potentially leading to high-performance materials which combine the advantages of polymer blends and the merits of polymer nanocomposites.

Measuring business growth:high-growth firms and their contribution to employment in the UK

The Measuring Business Growth report is a comprehensive look at UK business growth over the past decade. It makes a powerful case that a small number of high-growth businesses are responsible for the lion's share of job creation and prosperity. It is the counterpart to Business Growth and Innovation, which considers the wider benefits of growth businesses, their socio-economic impact, and the relationship between growth and innovation. This has significant implications for the direction of economic policy. It suggests that focusing attention on growing businesses and promoting excellence, far from being an elitist policy, gives rise to widespread job creation and prosperity.

Implications of high power losses in IR femtosecond laser inscribed fibre Bragg gratings

We report on high power issues related to the reliability of fibre Bragg gratings inscribed with an infrared femtosecond laser using the point-by-point writing method. Conventionally, fibre Bragg gratings have usually been written in fibres using ultraviolet light, either holographically or using a phase mask. Since the coating is highly absorbing in the UV, this process normally requires that the protective polymer coating is stripped prior to inscription, with the fibre then being recoated. This results in a time consuming fabrication process that, unless great care is taken, can lead to fibre strength degradation, due to the presence of surface damage. The recent development of FBG inscription using NIR femtosecond lasers has eliminated the requirement for the stripping of the coating. At the same time the ability to write gratings point-by-point offers the potential for great flexibility in the grating design. There is, however, a requirement for reliability testing of these gratings, particularly for use in telecommunications systems where high powers are increasingly being used in long-haul transmission systems making use of Raman amplification. We report on a study of such gratings which has revealed the presence of broad spectrum power losses. When high powers are used, even at wavelengths far removed from the Bragg condition, these losses produce an increase in the fibre temperature due to absorption in the coating. We have monitored this temperature rise using the wavelength shift in the grating itself. At power levels of a few watts, various temperature increases were experienced ranging from a few degrees up to the point where the buffer completely melts off the fibre at the grating site. Further investigations are currently under way to study the optical loss mechanisms in order to optimise the inscription mechanism and minimise such losses.

Entrepreneurship in the neighborhood:shifting patterns of economic activities in residential neighborhoods in five dutch cities

Cities are oftentimes seen as undergoing a process of "emergence" in the "new economy." However, this process has largely remained empirically underdetermined. This article examines the intra-city geography of emerging businesses in newly dominant sectors of the urban economy. The change in dominant sectors coincides with a shift towards small- and medium-sized businesses, creating new economic opportunities for urban residential areas. The residential neighborhood is introduced as a place where supply and demand side drivers operate to attract or limit such new economic activity. Allen Scott's perspective of the cognitive-cultural economy is used to analyze which neighborhoods are flourishing sites of the cognitive-cultural sectors. His perspective on industries that are on the rise in urban environments and their growth potential proves very valuable. Social demographic characteristics on the level of the neighborhood are used as predictors of the composition of the local economy. The analyses show that in particular wealthy, gentrified neighborhoods are more prone than others to becoming "hubs" of the cognitive-cultural economy. However, disadvantaged neighborhoods may under certain conditions serve as incubators for business start-ups as they offer low-rent office spaces. This has important consequences for their future economic growth potential as well as the distribution of successful businesses in the city. © 2013 Urban Affairs Association.

'There's a hell of a noise':living with a hearing loss in residential care

Background: hearing loss is common in older age. Research with older people in residential care settings has identified high prevalence of hearing loss and low uptake of hearing aids. Hearing loss in these settings is associated with reduced social engagement. Although hearing aids remain the default treatment for presbyacusic hearing loss, these are not well used. We do not know what other modifiable factors contribute to communication problems for older people with hearing loss living in residential care. Objectives: to explore the factors affecting communicating with a hearing loss in residential care. Methods: an ethnographic study in two residential care homes comprised 19 sessions of observation, and in-depth interviews with 18 residents. Observations explored communication behaviour in everyday interactions, including mealtimes, structured groups and informal group activities. Interviews were informed by the observations and identified reasons for these behaviours and communication preferences. Observational data were recorded in field notes and interviews were audio-recorded and transcribed. Analysis was conducted using constant comparison methods. Results: hearing loss affected whether residents were able to access social opportunities. Two key themes influenced this (i) contextual issues compounded communication difficulties and (ii) environmental noise restricted the residents' communication choices. Problems were observed at every mealtime and during formal and informal group activities. The use of hearing aids and access to hearing services did not improve social engagement. Conclusions: environmental and social factors are key to maximising communication opportunities. Improvements to communication in residential care settings could be based on changes in these with input from residents and staff. Further work is needed to develop effective communication strategies in residential care.

Impact of high microwave power on hydrogen impurity trapping in nanocrystalline diamond films grown with simultaneous nitrogen and oxygen addition into methane/hydrogen plasma

In this work, we study for the first time the influence of microwave power higher than 2.0 kW on bonded hydrogen impurity incorporation (form and content) in nanocrystalline diamond (NCD) films grown in a 5 kW MPCVD reactor. The NCD samples of different thickness ranging from 25 to 205 μm were obtained through a small amount of simultaneous nitrogen and oxygen addition into conventional about 4% methane in hydrogen reactants by keeping the other operating parameters in the same range as that typically used for the growth of large-grained polycrystalline diamond films. Specific hydrogen point defect in the NCD films is analyzed by using Fourier-transform infrared (FTIR) spectroscopy. When the other operating parameters are kept constant (mainly the input gases), with increasing of microwave power from 2.0 to 3.2 kW (the pressure was increased slightly in order to stabilize the plasma ball of the same size), which simultaneously resulting in the rise of substrate temperature more than 100 °C, the growth rate of the NCD films increases one order of magnitude from 0.3 to 3.0 μm/h, while the content of hydrogen impurity trapped in the NCD films during the growth process decreases with power. It has also been found that a new H related infrared absorption peak appears at 2834 cm-1 in the NCD films grown with a small amount of nitrogen and oxygen addition at power higher than 2.0 kW and increases with power higher than 3.0 kW. According to these new experimental results, the role of high microwave power on diamond growth and hydrogen impurity incorporation is discussed based on the standard growth mechanism of CVD diamonds using CH4/H2 gas mixtures. Our current experimental findings shed light into the incorporation mechanism of hydrogen impurity in NCD films grown with a small amount of nitrogen and oxygen addition into methane/hydrogen plasma.

Stabilization of catalyst particles against sintering on oxide supports with high oxygen ion lability exemplified by Ir-catalyzed decomposition of N2O

Iridium nanoparticles deposited on a variety of surfaces exhibited thermal sintering characteristics that were very strongly correlated with the lability of lattice oxygen in the supporting oxide materials. Specifically, the higher the lability of oxygen ions in the support, the greater the resistance of the nanoparticles to sintering in an oxidative environment. Thus with γ-Al2O3 as the support, rapid and extensive sintering occurred. In striking contrast, when supported on gadolinia-ceria and alumina-ceria-zirconia composite, the Ir nanoparticles underwent negligible sintering. In keeping with this trend, the behavior found with yttria-stabilized zirconia was an intermediate between the two extremes. This resistance, or lack of resistance, to sintering is considered in terms of oxygen spillover from support to nanoparticles and discussed with respect to the alternative mechanisms of Ostwald ripening versus nanoparticle diffusion. Activity towards the decomposition of N2O, a reaction that displays pronounced sensitivity to catalyst particle size (large particles more active than small particles), was used to confirm that catalytic behavior was consistent with the independently measured sintering characteristics. It was found that the nanoparticle active phase was Ir oxide, which is metallic, possibly present as a capping layer. Moreover, observed turnover frequencies indicated that catalyst-support interactions were important in the cases of the sinter-resistant systems, an effect that may itself be linked to the phenomena that gave rise to materials with a strong resistance to nanoparticle sintering.

Building environmental assessment scheme for residential building in Brunei

Building's construction activities, operation and demolition are increasingly recognised as a major source of environmental impact. One strategy for reducing such impacts is most widely known by the term Building Environmental Assessment (BEA). The research is an attempt to develop a new BEA scheme for residential buildings in Brunei which focussing on identifying BEA indicators that best suit for Brunei environment, social and economy. Studies show that Brunei residential sector needs urgent attention to transform its current consumption rate in more sustainable way. Recent launch of Brunei Green Building Council, mandatory energy efficiency guidelines and declaration of ambitious energy intensity reduction target, a new BEA scheme will help contribute sustainability target in residential sector. However the issues of developing a new BEA schemes using existing methods may face constraints in their effectiveness. In this regard, a consensus-forming technique-Delphi method-helps improve greater communication and gain consensus from experts in the construction industry through series of questionnaires. As a result, the final framework is produced comprises of 7 key categories and 37 applicable criteria that achieved high degree of consensus and importance.