Open-source mapping and services for Web-based land-cover validation

Monitoring land-cover changes on sites of conservation importance allows environmental problems to be detected, solutions to be developed and the effectiveness of actions to be assessed. However, the remoteness of many sites or a lack of resources means these data are frequently not available. Remote sensing may provide a solution, but large-scale mapping and change detection may not be appropriate, necessitating site-level assessments. These need to be easy to undertake, rapid and cheap. We present an example of a Web-based solution based on free and open-source software and standards (including PostGIS, OpenLayers, Web Map Services, Web Feature Services and GeoServer) to support assessments of land-cover change (and validation of global land-cover maps). Authorised users are provided with means to assess land-cover visually and may optionally provide uncertainty information at various levels: from a general rating of their confidence in an assessment to a quantification of the proportions of land-cover types within a reference area. Versions of this tool have been developed for the TREES-3 initiative (Simonetti, Beuchle and Eva, 2011). This monitors tropical land-cover change through ground-truthing at latitude / longitude degree confluence points, and for monitoring of change within and around Important Bird Areas (IBAs) by Birdlife International and the Royal Society for the Protection of Birds (RSPB). In this paper we present results from the second of these applications. We also present further details on the potential use of the land-cover change assessment tool on sites of recognised conservation importance, in combination with NDVI and other time series data from the eStation (a system for receiving, processing and disseminating environmental data). We show how the tool can be used to increase the usability of earth observation data by local stakeholders and experts, and assist in evaluating the impact of protection regimes on land-cover change.

Reproducible computing with Tzar and Docker

The potential for sharing environmental data and models is huge, but can be challenging for experts without specific programming expertise. We built an open-source, cross-platform framework (‘Tzar’) to run models across distributed machines. Tzar is simple to set up and use, allows dynamic parameter generation and enhances reproducibility by accessing versioned data and code. Combining Tzar with Docker helps us lower the entry barrier further by versioning and bundling all required modules and dependencies, together with the database needed to schedule work.

Spatial ecological complexity measures in GRASS GIS

Good estimates of ecosystem complexity are essential for a number of ecological tasks: from biodiversity estimation, to forest structure variable retrieval, to feature extraction by edge detection and generation of multifractal surface as neutral models for e.g. feature change assessment. Hence, measuring ecological complexity over space becomes crucial in macroecology and geography. Many geospatial tools have been advocated in spatial ecology to estimate ecosystem complexity and its changes over space and time. Among these tools, free and open source options especially offer opportunities to guarantee the robustness of algorithms and reproducibility. In this paper we will summarize the most straightforward measures of spatial complexity available in the Free and Open Source Software GRASS GIS, relating them to key ecological patterns and processes.

The Digital Observatory for Protected Areas (DOPA) Explorer 1.0

The Digital Observatory for Protected Areas (DOPA) has been developed to support the European Union’s efforts in strengthening our capacity to mobilize and use biodiversity data, information and forecasts so that they are readily accessible to policymakers, managers, experts and other users. Conceived as a set of web based services, DOPA provides a broad set of free and open source tools to assess, monitor and even forecast the state of and pressure on protected areas at local, regional and global scale. DOPA Explorer 1.0 is a web based interface available in four languages (EN, FR, ES, PT) providing simple means to explore the nearly 16,000 protected areas that are at least as large as 100 km2. Distinguishing between terrestrial, marine and mixed protected areas, DOPA Explorer 1.0 can help end users to identify those with most unique ecosystems and species, and assess the pressures they are exposed to because of human development. Recognized by the UN Convention on Biological Diversity (CBD) as a reference information system, DOPA Explorer is based on the best global data sets available and provides means to rank protected areas at the country and ecoregion levels. Inversely, DOPA Explorer indirectly highlights the protected areas for which information is incomplete. We finally invite the end-users of DOPA to engage with us through the proposed communication platforms to help improve our work to support the safeguarding of biodiversity.

XBRL:an (open) source of enlightenment or disillusion?

Extensible Business Reporting Language (XBRL) is being adopted by European regulators as a data standard for the exchange of business information. This paper examines the approach of XBRL International (XII) to the meta-data standard's development and diffusion. We theorise the development of XBRL using concepts drawn from a model of successful open source projects. Comparison of the open source model to XBRL enables us to identify a number of interesting similarities and differences. In common with open source projects, the benefits and progress of XBRL have been overstated and 'hyped' by enthusiastic participants. While XBRL is an open data standard in terms of access to the equivalent of its 'source code' we find that the governance structure of the XBRL consortium is significantly different to a model open source approach. The barrier to participation that is created by requiring paid membership and a focus on transacting business at physical conferences and meetings is identified as particularly critical. Decisions about the technical structure of XBRL, the regulator-led pattern of adoption and the organisation of XII are discussed. Finally areas for future research are identified.

Steps and bumps:precision extraction of discrete states of molecular machines

We report statistical time-series analysis tools providing improvements in the rapid, precision extraction of discrete state dynamics from time traces of experimental observations of molecular machines. By building physical knowledge and statistical innovations into analysis tools, we provide techniques for estimating discrete state transitions buried in highly correlated molecular noise. We demonstrate the effectiveness of our approach on simulated and real examples of steplike rotation of the bacterial flagellar motor and the F1-ATPase enzyme. We show that our method can clearly identify molecular steps, periodicities and cascaded processes that are too weak for existing algorithms to detect, and can do so much faster than existing algorithms. Our techniques represent a step in the direction toward automated analysis of high-sample-rate, molecular-machine dynamics. Modular, open-source software that implements these techniques is provided.

Acumen : an open-source testbed for cyber-physical systems research

Developing Cyber-Physical Systems requires methods and tools to support simulation and verification of hybrid (both continuous and discrete) models. The Acumen modeling and simulation language is an open source testbed for exploring the design space of what rigorousbut- practical next-generation tools can deliver to developers of Cyber- Physical Systems. Like verification tools, a design goal for Acumen is to provide rigorous results. Like simulation tools, it aims to be intuitive, practical, and scalable. However, it is far from evident whether these two goals can be achieved simultaneously. This paper explains the primary design goals for Acumen, the core challenges that must be addressed in order to achieve these goals, the “agile research method” taken by the project, the steps taken to realize these goals, the key lessons learned, and the emerging language design.

A room with a view:window images and 'open immanence' in the writings of adolphe retté and G.K. chesterton

Adolphe Retté and G.K. Chesterton often use the image of a window, a paradox given the widespread view that Catholic writers are usually closed minded. This article asks whether Charles Taylor's philosophy of the individual could explain this paradox more satisfactorily. Chesterton's windows express a realist epistemology, while Retté's windows express the illumination of faith. The themacity of the subject in their writings, however, shows that their windows give expression to Taylor's 'open immanence', rather than Taylorian 'porosity'. Their reactionary character can be interpreted as a kind of Taylorian 'buffering' which is necessary for believing writers resisting secularity. © 2011 The Author. Published by Oxford University Press 2011; all rights reserved.

Resistance to persuasive messages as a function of majority and minority source status

Three experiments examined the extent to which attitudes following majority and minority influence are resistant to counter-persuasion. In Experiment 1, participants’ attitudes were measured after being exposed to two messages which argued opposite positions (initial pro-attitudinal message and subsequent, counter-attitudinal counter-message). Attitudes following minority endorsement of the initial message were more resistant to a (second) counter-message than attitudes following majority endorsement of the initial message. Experiment 2 replicated this finding when the message direction was reversed (counter-attitudinal initial message and pro-attitudinal counter-message) and showed that the level of message elaboration mediated the amount of attitude resistance. Experiment 3 included conditions where participants received only the counter-message and showed that minority-source participants had resisted the second message (counter-message) rather than being influenced by it. These results show that minority influence induces systematic processing of its arguments which leads to attitudes which are resistant to counter-persuasion.

Humans assume a mixture of diffuse and point-source lighting when viewing sinusoidal shading patterns

Observers perceive sinusoidal shading patterns as being due to sinusoidally corrugated surfaces, and perceive surface peaks to be offset from luminance maxima by between zero and 1/4 wavelength. This offset varies with grating orientation. Physically, the shading profile of a sinusoidal surface will be approximately sinusoidal, with the same spatial frequency as the surface, only when: (A) it is lit suitably obliquely by a point source, or (B) the light source is diffuse and hemispherical--the 'dark is deep' rule applies. For A, surface peaks will be offset by 1/4 wavelength from the luminance maxima; for B, this offset will be zero. As the sum of two same-frequency sinusoids with different phases is a sinusoid of intermediate phase, our results suggest that observers assume a mixture of two light sources whose relative strength varies with grating orientation. The perceived surface offsets imply that gratings close to horizontal are taken to be lit by a point source; those close to vertical by a diffuse source. [Supported by EPSRC grants to AJS and MAG].

Phoenix industries and open innovation? The Midlands advanced automotive manufacturing and engineering industry

This paper explores the links between open innovation and the emergence of a ‘phoenix industry’ centred on the UK’s traditional automotive heartland, the West Midlands, which has developed a significant presence in automotive design and engineering, particularly among small and niche firms. Drawing on case study research, the paper investigates whether this can be considered as a phoenix industry, and to what extent open innovation has been important in the industry’s development. The paper considers relationships between firms and impacts in terms of changing economic and labour market conditions. The paper concludes by examining the role that public policy has played to date and might play in the future in supporting an emerging phoenix industry with open innovation features.

Integrating ERP and enterprise social software

Purpose: This study explores the use of a hybrid ERP system, combining an ERP system with enterprise social software (ESS). The study will provide a critical assessment of the implementation of this process technology. Design/methodology/approach: Multiple case studies of organisations based in China were conducted to understand the use of ERP systems in different contexts. Following an evaluation of the context of each ERP implementation (within-case analysis) the research draws a cross-case conclusion that defines the nature of a hybrid ERP system and then synthesises the propositions related to the benefits and challenges of implementation. Findings We find that a hybrid ERP system is able to support efficiency in business process management and also provide a flexible response to changes in business requirements. It does this by allowing for the continued use of informal processes that cannot be incorporated into the ERP system. Practical implications: This research indicates how ERP systems in conjunction with ESS can provide a flexible response to changing business requirements and increase collaboration within the organisation. Key lessons include the need to perform informal activities under the guidance of managers and provide clear boundaries for the implementation of informal activities. Originality/Value: This study has found that the use of case studies can provide a valuable insight into the use of a hybrid ERP system from the perspective of its use within the organisation as a work system that requires an assessment of the context within which organisational members perform their work

Building the hybrid organisation through ERP and enterprise social software

This research traces the implementation of an information system in the form of ERP modules covering tenant and contract management in a Chinese service company. Misalignments between the ERP system specification and user needs led to the adoption of informal processes within the organisation. These processes are facilitated within an informal organisational structure and are based on human interactions undertaken within the formal organisation. Rather than to attempt to suppress the emergence of the informal organisation the company decided to channel the energies of staff involved in informal processes towards organisational goals. The company achieved this by harnessing the capabilities of what we term a hybrid ERP system, combining the functionality of a traditional (formal) ERP installation with the capabilities of Enterprise Social Software (ESS). However the company recognised that the successful operation of the hybrid ERP system would require a number of changes in organisational design in areas such as reporting structures and communication channels. A narrative provided by interviews with company personnel is thematised around the formal and informal characteristics of the organisation as defined in the literature. This leads to a definition of the characteristics of the hybrid organisation and strategies for enabling a hybrid organisation, facilitated by a hybrid ERP system, which directs formal and informal behaviour towards organisational goals and provides a template for future hybrid implementations.

Template-free and eco-friendly synthesis of hierarchical Ag3PO4 microcrystals with sharp corners and edges for enhanced photocatalytic activity under visible light

Herein, we demonstrate a template-free and eco-friendly strategy to synthesize hierarchical Ag3PO4 microcrystals with sharp corners and edges via silver–ammine complex at room temperature. The as-synthesized hierarchical Ag3PO4 microcrystals were characterized by X-ray diffraction, field-emission scanning electron microscope (FESEM), UV–vis diffuse reflectance spectroscopy (UV–vis DRS), BET surface area analyzer, and photoluminescence analysis (PL). Our results clearly indicated that the as-synthesized Ag3PO4 microcrystals possess a hierarchical structure with sharp corners and edges. More attractively, the adsorption ability and visible light photocatalytic activity of the as-synthesized hierarchical Ag3PO4 is much higher than that of conventional Ag3PO4.