Measurement of work group diversity

Whilst research on work group diversity has proliferated in recent years, relatively little attention has been paid to the precise definition of diversity or its measurement. One of the few studies to do so is Harrison and Klein’s (2007) typology, which defined three types of diversity – separation, variety and disparity – and suggested possible indices with which they should be measured. However, their typology is limited by its association of diversity types with variable measurement, by a lack of clarity over the meaning of variety, and by the absence of a clear guidance about which diversity index should be employed. In this thesis I develop an extended version of the typology, including four diversity types (separation, range, spread and disparity), and propose specific indices to be used for each type of diversity with each variable type (ratio, interval, ordinal and nominal). Indices are chosen or derived from first principles based on the precise definition of the diversity type. I then test the usefulness of these indices in predicting outcomes of diversity compared with other indices, using both an extensive simulated data set (to estimate the effects of mis-specification of diversity type or index) and eight real data sets (to examine whether the proposed indices produce the strongest relationships with hypothesised outcomes). The analyses lead to the conclusion that the indices proposed in the typology are at least as good as, and usually better than, other indices in terms of both measuring effect sizes and power to find significant results, and thus provide evidence to support the typology. Implications for theory and methodology are discussed.

The development of a new compiler-compiler front-end

The increasing cost of developing complex software systems has created a need for tools which aid software construction. One area in which significant progress has been made is with the so-called Compiler Writing Tools (CWTs); these aim at automated generation of various components of a compiler and hence at expediting the construction of complete programming language translators. A number of CWTs are already in quite general use, but investigation reveals significant drawbacks with current CWTs, such as lex and yacc. The effective use of a CWT typically requires a detailed technical understanding of its operation and involves tedious and error-prone input preparation. Moreover, CWTs such as lex and yacc address only a limited aspect of the compilation process; for example, actions necessary to perform lexical symbol valuation and abstract syntax tree construction must be explicitly coded by the user. This thesis presents a new CWT called CORGI (COmpiler-compiler from Reference Grammar Input) which deals with the entire `front-end' component of a compiler; this includes the provision of necessary data structures and routines to manipulate them, both generated from a single input specification. Compared with earlier CWTs, CORGI has a higher-level and hence more convenient user interface, operating on a specification derived directly from a `reference manual' grammar for the source language. Rather than developing a compiler-compiler from first principles, CORGI has been implemented by building a further shell around two existing compiler construction tools, namely lex and yacc. CORGI has been demonstrated to perform efficiently in realistic tests, both in terms of speed and the effectiveness of its user interface and error-recovery mechanisms.

Induction by a Hilbert hypercube representation

This thesis describes a novel connectionist machine utilizing induction by a Hilbert hypercube representation. This representation offers a number of distinct advantages which are described. We construct a theoretical and practical learning machine which lies in an area of overlap between three disciplines - neural nets, machine learning and knowledge acquisition - hence it is refered to as a "coalesced" machine. To this unifying aspect is added the various advantages of its orthogonal lattice structure as against less structured nets. We discuss the case for such a fundamental and low level empirical learning tool and the assumptions behind the machine are clearly outlined. Our theory of an orthogonal lattice structure the Hilbert hypercube of an n-dimensional space using a complemented distributed lattice as a basis for supervised learning is derived from first principles on clearly laid out scientific principles. The resulting "subhypercube theory" was implemented in a development machine which was then used to test the theoretical predictions again under strict scientific guidelines. The scope, advantages and limitations of this machine were tested in a series of experiments. Novel and seminal properties of the machine include: the "metrical", deterministic and global nature of its search; complete convergence invariably producing minimum polynomial solutions for both disjuncts and conjuncts even with moderate levels of noise present; a learning engine which is mathematically analysable in depth based upon the "complexity range" of the function concerned; a strong bias towards the simplest possible globally (rather than locally) derived "balanced" explanation of the data; the ability to cope with variables in the network; and new ways of reducing the exponential explosion. Performance issues were addressed and comparative studies with other learning machines indicates that our novel approach has definite value and should be further researched.

Aspects of the design and control of manufacturing systems subject to demand uncertainty

The recent explosive growth in advanced manufacturing technology (AMT) and continued development of sophisticated information technologies (IT) is expected to have a profound effect on the way we design and operate manufacturing businesses. Furthermore, the escalating capital requirements associated with these developments have significantly increased the level of risk associated with initial design, ongoing development and operation. This dissertation has examined the integration of two key sub-elements of the Computer Integrated Manufacturing (CIM) system, namely the manufacturing facility and the production control system. This research has concentrated on the interactions between production control (MRP) and an AMT based production facility. The disappointing performance of such systems has been discussed in the context of a number of potential technological and performance incompatibilities between these two elements. It was argued that the design and selection of operating policies for both is the key to successful integration. Furthermore, policy decisions are shown to play an important role in matching the performance of the total system to the demands of the marketplace. It is demonstrated that a holistic approach to policy design must be adopted if successful integration is to be achieved. It is shown that the complexity of the issues resulting from such an approach required the formulation of a structured design methodology. Such a methodology was subsequently developed and discussed. This combined a first principles approach to the behaviour of system elements with the specification of a detailed holistic model for use in the policy design environment. The methodology aimed to make full use of the `low inertia' characteristics of AMT, whilst adopting a JIT configuration of MRP and re-coupling the total system to the market demands. This dissertation discussed the application of the methodology to an industrial case study and the subsequent design of operational policies. Consequently a novel approach to production control resulted. A central feature of which was a move toward reduced manual intervention in the MRP processing and scheduling logic with increased human involvement and motivation in the management of work-flow on the shopfloor. Experimental results indicated that significant performance advantages would result from the adoption of the recommended policy set.

Development of an electric heat pump for domestic use

This thesis records the design and development of an electrically driven, air to water, vapour compression heat pump of nominally 6kW heat output, for residential space heating. The study was carried out on behalf of GEC Research Ltd through the Interdisciplinary Higher Degrees Scheme at Aston University. A computer based mathematical model of the vapour compression cycle was produced as a design aid, to enable the effects of component design changes or variations in operating conditions to be predicted. This model is supported by performance testing of the major components, which revealed that improvements in the compressor isentropic efficiency offer the greatest potential for further increases in cycle COPh. The evaporator was designed from first principles, and is based on wire-wound heat transfer tubing. Two evaporators, of air side area 10.27 and 16.24m2, were tested in a temperature and humidity controlled environment, demonstrating that the benefits of the large coil are greater heat pump heat output and lower noise levels. A systematic study of frost growth rates suggested that this problem is most severe at the conditions of saturated air at 0oC combined with low condenser water temperature. A dynamic simulation model was developed to predict the in-service performance of the heat pump. This study confirmed the importance of an adequate radiator area for heat pump installations. A prototype heat pump was designed and manufactured, consisting of a hermetic reciprocating compressor, a coaxial tube condenser and a helically coiled evaporator, using Refrigerant 22. The prototype was field tested in a domestic environment for one and a half years. The installation included a comprehensive monitoring system. Initial problems were encountered with defrosting and compressor noise, both of which were solved. The unit then operated throughout the 1985/86 heating season without further attention, producing a COPh of 2.34.

Atomic structure of the two intermediate phase glasses SiSe4 and GeSe4

The microscopic origin of the intermediate phase in two prototypical covalently bonded AxB1-x network glass forming systems, where A=Ge or Si, B=Se, and 0=x=1, was investigated by combining neutron diffraction with first-principles molecular-dynamics methods. Specifically, the structure of glassy GeSe4 and SiSe4 was examined, and the calculated total structure factor and total pair-correlation function for both materials are in good agreement with experiment. The structure of both glasses differs markedly from a simple model comprising undefective AB4 corner-sharing tetrahedra in which all A atoms are linked by B2 dimers. Instead, edge-sharing tetrahedra occur and the twofold coordinated Se atoms form three distinct structural motifs, namely, Se-Se2, Se-SeGe (or Se-SeSi), and Se-Ge2 (or Se-Si2). This identifies several of the conformations that are responsible for the structural variability in GexSe1-x and SixSe1-x glasses, a quantity that is linked to the finite width of the intermediate phase window.

Selection of simulation tools for improving supply chain performance

Simulation is an effective method for improving supply chain performance. However, there is limited advice available to assist practitioners in selecting the most appropriate method for a given problem. Much of the advice that does exist relies on custom and practice rather than a rigorous conceptual or empirical analysis. An analysis of the different modelling techniques applied in the supply chain domain was conducted, and the three main approaches to simulation used were identified; these are System Dynamics (SD), Discrete Event Simulation (DES) and Agent Based Modelling (ABM). This research has examined these approaches in two stages. Firstly, a first principles analysis was carried out in order to challenge the received wisdom about their strengths and weaknesses and a series of propositions were developed from this initial analysis. The second stage was to use the case study approach to test these propositions and to provide further empirical evidence to support their comparison. The contributions of this research are both in terms of knowledge and practice. In terms of knowledge, this research is the first holistic cross paradigm comparison of the three main approaches in the supply chain domain. Case studies have involved building ‘back to back’ models of the same supply chain problem using SD and a discrete approach (either DES or ABM). This has led to contributions concerning the limitations of applying SD to operational problem types. SD has also been found to have risks when applied to strategic and policy problems. Discrete methods have been found to have potential for exploring strategic problem types. It has been found that discrete simulation methods can model material and information feedback successfully. Further insights have been gained into the relationship between modelling purpose and modelling approach. In terms of practice, the findings have been summarised in the form of a framework linking modelling purpose, problem characteristics and simulation approach.

Structure of glassy GeO2

The full set of partial structure factors for glassy germania, or GeO2, were accurately measured by using the method of isotopic substitution in neutron diffraction in order to elucidate the nature of the pair correlations for this archetypal strong glass former. The results show that the basic tetrahedral Ge(O-1/2)(4) building blocks share corners with a mean inter-tetrahedral Ge-O-Ge bond angle of 132(2)degrees. The topological and chemical ordering in the resultant network displays two characteristic length scales at distances greater than the nearest neighbour. One of these describes the intermediate range order, and manifests itself by the appearance of a first sharp diffraction peak in the measured diffraction patterns at a scattering vector k(FSDP) approximate to 1.53 angstrom(-1), while the other describes so-called extended range order, and is associated with the principal peak at k(PP) = 2.66( 1) angstrom(-1). We find that there is an interplay between the relative importance of the ordering on these length scales for tetrahedral network forming glasses that is dominated by the extended range ordering with increasing glass fragility. The measured partial structure factors for glassy GeO2 are used to reproduce the total structure factor measured by using high energy x-ray diffraction and the experimental results are also compared to those obtained by using classical and first principles molecular dynamics simulations.

Functionalised particles using dry powder coating in pharmaceutical drug delivery:promises and challenges

Introduction: Production of functionalised particles using dry powder coating is a one-step, environmentally friendly process that paves the way for the development of particles with targeted properties and diverse functionalities. Areas covered: Applying the first principles in physical science for powders, fine guest particles can be homogeneously dispersed over the surface of larger host particles to develop functionalised particles. Multiple functionalities can be modified including: flowability, dispersibility, fluidisation, homogeneity, content uniformity and dissolution profile. The current publication seeks to understand the fundamental underpinning principles and science governing dry coating process, evaluate key technologies developed to produce functionalised particles along with outlining their advantages, limitations and applications and discusses in detail the resultant functionalities and their applications. Expert opinion: Dry particle coating is a promising solvent-free manufacturing technology to produce particles with targeted functionalities. Progress within this area requires the development of continuous processing devices that can overcome challenges encountered with current technologies such as heat generation and particle attrition. Growth within this field requires extensive research to further understand the impact of process design and material properties on resultant functionalities.

A systematic approach to establish fundamental principles of computer applications packages design

This work attempts to create a systemic design framework for man-machine interfaces which is self consistent, compatible with other concepts, and applicable to real situations. This is tackled by examining the current architecture of computer applications packages. The treatment in the main is philosophical and theoretical and analyses the origins, assumptions and current practice of the design of applications packages. It proposes that the present form of packages is fundamentally contradictory to the notion of packaging itself. This is because as an indivisible ready-to-implement solution, current package architecture displays the following major disadvantages. First, it creates problems as a result of user-package interactions, in which the designer tries to mould all potential individual users, no matter how diverse they are, into one model. This is worsened by the minute provision, if any, of important properties such as flexibility, independence and impartiality. Second, it displays rigid structure that reduces the variety and/or multi-use of the component parts of such a package. Third, it dictates specific hardware and software configurations which probably results in reducing the number of degrees of freedom of its user. Fourth, it increases the dependence of its user upon its supplier through inadequate documentation and understanding of the package. Fifth, it tends to cause a degeneration of the expertise of design of the data processing practitioners. In view of this understanding an alternative methodological design framework which is both consistent with systems approach and the role of a package in its likely context is proposed. The proposition is based upon an extension of the identified concept of the hierarchy of holons* which facilitates the examination of the complex relationships of a package with its two principal environments. First, the user characteristics and his decision making practice and procedures; implying an examination of the user's M.I.S. network. Second, the software environment and its influence upon a package regarding support, control and operation of the package. The framework is built gradually as discussion advances around the central theme of a compatible M.I.S., software and model design. This leads to the formation of the alternative package architecture that is based upon the design of a number of independent, self-contained small parts. Such is believed to constitute the nucleus around which not only packages can be more effectively designed, but is also applicable to many man-machine systems design.

Exporting to Eastern Europe : principles and practice, including a case study of the market for fire fighting equipment

East-West trade has grown rapidly since the sixties, stimulating a parallel expansion in the literature on the subject. An extensive review of this literature shows how: (i) most of the issues involved have at their source the distinctions between East and West in political ideology and/or economic management, and (ii) there has been a tendency to keep theoretical and practical perspectives on the subject too separate. This thesis demonstrates the importance of understanding the fundamental principles implied in the first point, and represents an attempt to bridge the gap identified in the second. A detailed study of the market for fire fighting equipment in Eastern Europe is undertaken in collaboration with a medium-sized company, Angus Fire Armour Limited. Desk research methods are combined with visits to the market to assess the potential for the company's products, and recommendations for future strategy are made. The case demonstrates the scope and limitations of various research methods for the East European market, and a model for market research relevant to all companies is developed. Tne case study highlights three areas largely neglected in the literature: (i) the problems of internal company adaptation to East European conditions; (ii) the division of responsibility between foreign trade organisations; and (iii) bribery and corruption in East-West trade. Further research into the second topic - through a survey of 36 UK exporters - and the third - through analysis of publicised corruption cases - confirms the representativeness of the Angus experience, and reflects on the complexity of the Bast European import process, which does not always function as is commonly supposed. The very complexity of the problems confronting companies reaffirms the need to appreciate the principles underlying the subject, while the detailed analysis into questions of, originally, a marketing nature, reveals wider implications for East-West trade and East-West relations.

Tense, aspect and modality in first and second language

Time after time… and aspect and mood. Over the last twenty five years, the study of time, aspect and - to a lesser extent - mood acquisition has enjoyed increasing popularity and a constant widening of its scope. In such a teeming field, what can be the contribution of this book? We believe that it is unique in several respects. First, this volume encompasses studies from different theoretical frameworks: functionalism vs generativism or function-based vs form-based approaches. It also brings together various sub-fields (first and second language acquisition, child and adult acquisition, bilingualism) that tend to evolve in parallel rather than learn from each other. A further originality is that it focuses on a wide range of typologically different languages, and features less studied languages such as Korean and Bulgarian. Finally, the book gathers some well-established scholars, young researchers, and even research students, in a rich inter-generational exchange, that ensures the survival but also the renewal and the refreshment of the discipline. The book at a glance The first part of the volume is devoted to the study of child language acquisition in monolingual, impaired and bilingual acquisition, while the second part focuses on adult learners. In this section, we will provide an overview of each chapter. The first study by Aviya Hacohen explores the acquisition of compositional telicity in Hebrew L1. Her psycholinguistic approach contributes valuable data to refine theoretical accounts. Through an innovating methodology, she gathers information from adults and children on the influence of definiteness, number, and the mass vs countable distinction on the constitution of a telic interpretation of the verb phrase. She notices that the notion of definiteness is mastered by children as young as 10, while the mass/count distinction does not appear before 10;7. However, this does not entail an adult-like use of telicity. She therefore concludes that beyond definiteness and noun type, pragmatics may play an important role in the derivation of Hebrew compositional telicity. For the second chapter we move from a Semitic language to a Slavic one. Milena Kuehnast focuses on the acquisition of negative imperatives in Bulgarian, a form that presents the specificity of being grammatical only with the imperfective form of the verb. The study examines how 40 Bulgarian children distributed in two age-groups (15 between 2;11-3;11, and 25 between 4;00 and 5;00) develop with respect to the acquisition of imperfective viewpoints, and the use of imperfective morphology. It shows an evolution in the recourse to expression of force in the use of negative imperatives, as well as the influence of morphological complexity on the successful production of forms. With Yi-An Lin’s study, we concentrate both on another type of informant and of framework. Indeed, he studies the production of children suffering from Specific Language Impairment (SLI), a developmental language disorder the causes of which exclude cognitive impairment, psycho-emotional disturbance, and motor-articulatory disorders. Using the Leonard corpus in CLAN, Lin aims to test two competing accounts of SLI (the Agreement and Tense Omission Model [ATOM] and his own Phonetic Form Deficit Model [PFDM]) that conflicts on the role attributed to spellout in the impairment. Spellout is the point at which the Computational System for Human Language (CHL) passes over the most recently derived part of the derivation to the interface components, Phonetic Form (PF) and Logical Form (LF). ATOM claims that SLI sufferers have a deficit in their syntactic representation while PFDM suggests that the problem only occurs at the spellout level. After studying the corpus from the point of view of tense / agreement marking, case marking, argument-movement and auxiliary inversion, Lin finds further support for his model. Olga Gupol, Susan Rohstein and Sharon Armon-Lotem’s chapter offers a welcome bridge between child language acquisition and multilingualism. Their study explores the influence of intensive exposure to L2 Hebrew on the development of L1 Russian tense and aspect morphology through an elicited narrative. Their informants are 40 Russian-Hebrew sequential bilingual children distributed in two age groups 4;0 – 4;11 and 7;0 - 8;0. They come to the conclusion that bilingual children anchor their narratives in perfective like monolinguals. However, while aware of grammatical aspect, bilinguals lack the full form-function mapping and tend to overgeneralize the imperfective on the principles of simplicity (as imperfective are the least morphologically marked forms), universality (as it covers more functions) and interference. Rafael Salaberry opens the second section on foreign language learners. In his contribution, he reflects on the difficulty L2 learners of Spanish encounter when it comes to distinguishing between iterativity (conveyed with the use of the preterite) and habituality (expressed through the imperfect). He examines in turn the theoretical views that see, on the one hand, habituality as part of grammatical knowledge and iterativity as pragmatic knowledge, and on the other hand both habituality and iterativity as grammatical knowledge. He comes to the conclusion that the use of preterite as a default past tense marker may explain the impoverished system of aspectual distinctions, not only at beginners but also at advanced levels, which may indicate that the system is differentially represented among L1 and L2 speakers. Acquiring the vast array of functions conveyed by a form is therefore no mean feat, as confirmed by the next study. Based on the prototype theory, Kathleen Bardovi-Harlig’s chapter focuses on the development of the progressive in L2 English. It opens with an overview of the functions of the progressive in English. Then, a review of acquisition research on the progressive in English and other languages is provided. The bulk of the chapter reports on a longitudinal study of 16 learners of L2 English and shows how their use of the progressive expands from the prototypical uses of process and continuousness to the less prototypical uses of repetition and future. The study concludes that the progressive spreads in interlanguage in accordance with prototype accounts. However, it suggests additional stages, not predicted by the Aspect Hypothesis, in the development from activities and accomplishments at least for the meaning of repeatedness. A similar theoretical framework is adopted in the following chapter, but it deals with a lesser studied language. Hyun-Jin Kim revisits the claims of the Aspect Hypothesis in relation to the acquisition of L2 Korean by two L1 English learners. Inspired by studies on L2 Japanese, she focuses on the emergence and spread of the past / perfective marker ¬–ess- and the progressive – ko iss- in the interlanguage of her informants throughout their third and fourth semesters of study. The data collected through six sessions of conversational interviews and picture description tasks seem to support the Aspect Hypothesis. Indeed learners show a strong association between past tense and accomplishments / achievements at the start and a gradual extension to other types; a limited use of past / perfective marker with states and an affinity of progressive with activities / accomplishments and later achievements. In addition, - ko iss– moves from progressive to resultative in the specific category of Korean verbs meaning wear / carry. While the previous contributions focus on function, Evgeniya Sergeeva and Jean-Pierre Chevrot’s is interested in form. The authors explore the acquisition of verbal morphology in L2 French by 30 instructed native speakers of Russian distributed in a low and high levels. They use an elicitation task for verbs with different models of stem alternation and study how token frequency and base forms influence stem selection. The analysis shows that frequency affects correct production, especially among learners with high proficiency. As for substitution errors, it appears that forms with a simple structure are systematically more frequent than the target form they replace. When a complex form serves as a substitute, it is more frequent only when it is replacing another complex form. As regards the use of base forms, the 3rd person singular of the present – and to some extent the infinitive – play this role in the corpus. The authors therefore conclude that the processing of surface forms can be influenced positively or negatively by the frequency of the target forms and of other competing stems, and by the proximity of the target stem to a base form. Finally, Martin Howard’s contribution takes up the challenge of focusing on the poorer relation of the TAM system. On the basis of L2 French data obtained through sociolinguistic interviews, he studies the expression of futurity, conditional and subjunctive in three groups of university learners with classroom teaching only (two or three years of university teaching) or with a mixture of classroom teaching and naturalistic exposure (2 years at University + 1 year abroad). An analysis of relative frequencies leads him to suggest a continuum of use going from futurate present to conditional with past hypothetic conditional clauses in si, which needs to be confirmed by further studies. Acknowledgements The present volume was inspired by the conference Acquisition of Tense – Aspect – Mood in First and Second Language held on 9th and 10th February 2008 at Aston University (Birmingham, UK) where over 40 delegates from four continents and over a dozen countries met for lively and enjoyable discussions. This collection of papers was double peer-reviewed by an international scientific committee made of Kathleen Bardovi-Harlig (Indiana University), Christine Bozier (Lund Universitet), Alex Housen (Vrije Universiteit Brussel), Martin Howard (University College Cork), Florence Myles (Newcastle University), Urszula Paprocka (Catholic University of Lublin), †Clive Perdue (Université Paris 8), Michel Pierrard (Vrije Universiteit Brussel), Rafael Salaberry (University of Texas at Austin), Suzanne Schlyter (Lund Universitet), Richard Towell (Salford University), and Daniel Véronique (Université d’Aix-en-Provence). We are very much indebted to that scientific committee for their insightful input at each step of the project. We are also thankful for the financial support of the Association for French Language Studies through its workshop grant, and to the Aston Modern Languages Research Foundation for funding the proofreading of the manuscript.