The stratigraphy of the Fishguard volcanic complex and associated sediments, SW Dyfed, Wales

This thesis describes the geology of a Lower Palaeozoic terrain, situated west of the town of Fishguard, SW Dyfed, Wales. The area is dominated by the Fishguard Volcanic Complex (Upper Llanvirn), and sediments that range in age from the Middle Cambrian to the Lower Llandeilo. The successions represent an insight into sedimentation and volcanism for c. 100 Ma. along the south-western margin of the Lower Palaeozoic Welsh Basin. The stratigraphy of the sedimentary sequence has been completely revised and the existing volcanostratigraphy modified. The observed complexity of the stratigraphy is primarily the consequence of Caldedonide deformation which resulted in large scale repetition. Fold-thrust tectonics dominates the structural style of the area. Caledonide trending (NE-SW) cross-faults complicate preexisting structures. Middle Cambrian (?) sedimentation is documented by shallow marine clastics and red shales deposited within tidal - subtidal environments. Upper Cambrian sedimentation was dominated by shallow marine `storm' and `fair weather' sedimentation within a muddy shelf environment. Shallow marine conglomerates and heterolithic intertidal siliciclastics mark the onset of Ordovician sedimentation during the lower Arenig transgression. Mid-Arenig sediments reflect deposits influenced by storm, fair-weather and wave related processes in various shallow marine environments, including; shoreface, inner shelf, shoaling bar, and deltaic. Graptolitic marine shales were deposited from the upper mid-Arenig through to the lower Llandeilo; during which time sediments accumulated by pelagic processes and fine grained turbidites. The varied nature of sedimentation reflects both localised change within the depositional system and the influence of larger regional eustatic events. Ordovician subaqueous volcanic activity produced thick accumulations of lavas, pyroclastics, hydroclastics, and hyaloclastics. The majority of volcanism was effusive in nature, erupted below the Pressure Compensation Level. Basaltic volcanism was characterised by pillowed lavas and tube networks, whilst sheet-flow lavas, pillow breccias and minor hyaloclastites developed locally. Silicic volcanism was dominated by rhyolitic clastics of various affinities, although coherent silicic obsidian lavas, sheet-flow lavas and pyroclastics developed. Hypabyssal intrusives of variable composition and habit occur throughout the volcanic successions. Low-grade regional metamorphism has variably affected the area, conditions of the prehnite-pumpellyite and greenschist facies having been attained. Numerous secondary phases developed in response to the conditions imposed, which collectively indicate that P-T conditions were of low-pressure facies series in the range P= 1.2-2.0 kbars and T= 230-350oC, under an elevated geothermal gradient of 40-45oC km-1. Polymineralic cataclastites associated with Caledonide deformation indicate that tectonism and metamorphism were in part contemporaneous.

The diagenesis and palaeomagnetism of permian and triassic sediments from central Spain

Detailed diagenetic and palaeomagnetic studies have been made of Permian and Triassic rocks from the Iberian Cordillera, Spain. Five stratigraphical units comprising the Autunian, Saxonian, Buntsandstein, Muschelkalk, and Keuper have been studied in a number of sections which have been well documented sedimentologically. Autuninan rocks have a characteristic remanence which is exclusively reversed and corresponds to the Kiaman Interval. The pole position identified is consistent with previous studies, which indicate the rotation of Iberia in post-Triassic times. The Saxonian facies show complex multicomponent magnetizations; no polarity zonation can be resolved. The Buntsandstein is remarkable in that much of it is remagnetised in a direction similar to the present-day local geomagnetic field direction. The secondary remanence is carried by fine-grained haematite which has been formed as a result of carbonate dissolution associated with structural inversion of the Iberian Cordillera. Dating of diagenetic events associated with this remagnetization is also possible. Fragments of primary remanence are preserved in some fine-grained lithologies of the Buntsandstein. These indicate that normal and reversed zones of magnetization were originally present. The magnetization of the Muschelkalk and Keuper carbonates is also complex; secondary components similar to those of the Buntsandstein are present but there is evidence that primary components were predominantly normal during Karnian times.

Electrodeposition on aluminium and its alloys

Aluminium alloys S1C, NS4, HE9, LM25 and the 'difficult' zinc containing U.S. specification alloy used for automobile bumpers (X-7046), have been successfully electroplated using pretreatments which utilized either conventional immersion, elevated temperature or electrolytic modified alloy zincate (M.A.Z.) deposits. Satisfactory adhesion in excess of 7•5 KN m -I was only achieved on X-7046 using an electrolytic M.A.Z. pretreatment. The limitations of simple zincate solutions were demonstrated. Growth of deposits ~as monitored using a weight loss technique and the morphology of the various deposits studied using scanning electron microscopy. The characteristics of a specific alloy and processing sequence selected had a significant influence on the growth and morphology of the N.A.Z. deposi t. These all affected subsequent adhesion of electrodeposited nickel. The advantages of double-dip sequences were confirmed. Superior adhesion was associated with a uniform, thin, fine grained M.A.Z. deposit which exhibited rapid and complete surface coverage of the aluminium alloy. The presence of this preferred type deposit did not guarantee adhesion because a certain degree of etching was essential. For a satisfactory combination of alloy and M.A.Z. pretreatment, there was a specific optimum film weight per unit area which resulted in maximum adhesion. An ideal film weight of 0•06 :!: 0•01 mg cm-2was determined for S1C. Different film weights were required for the other alloys due to variations in surface topography caused by pretreatment. S1C was the easiest alloy on which to achieve high bond strength. Peel adhesion was not directly related to tensile strength of the alloy. The highest adhesion value was obtained on S1C which had the lowest strength of the alloys studied. The characteristics of the failure surfaces after peeling depended on alloy type, adhesion level and pretreatment employed. Plated aluminium alloys exhibited excellent corrosion resistance when appropriately pretreated. The M.A.Z. layer was not preferentially attacked. There was a threshold value of adhesion below which corrosion performance ~a8 poor. Alloy type, pretreatment and coating system influenced corrosion performance. Microporous chromium gave better corrosion protection than decorative chromium.

Coherence and understanding in informal conversations between native and non-native speakers of English

This study investigates informal conversations between native English speakers and international students living and studying in the UK. 10 NNS participants recorded themselves during conversations with native speakers. The audio-recordings were transcribed and a fine-grained, qualitative analysis was employed to examine how the participants jointly achieved both coherence and understanding in the conversations, and more specifically how the NNSs contributed to this achievement. The key areas of investigation focused on features of topic management, such as topic initiations, changes and transitions, and on the impact which any communicative difficulties may have on the topical continuity of the conversations. The data suggested that these conversations flowed freely and coherently, and were marked by a relative scarcity of the communicative difficulties often associated with NS-NNS interactions. Moreover, language difficulties were found to have minimal impact on the topic development of the conversations. Unlike most previous research in the field, the data further indicated that the NNSs were able to make active contributions to the initiation and change of topics, and to employ a range of strategies to manage these effectively and coherently. The study considers the implications which the findings may have for teaching and learning, for second language acquisition research, and for non-native speakers everywhere.

Knowledge mediation and overlapping in interfirm networks

Purpose – The literature on interfirm networks devotes scant attention to the ways collaborating firms combine and integrate the knowledge they share and to the subsequent learning outcomes. This study aims to investigate how motorsport companies use network ties to share and recombine knowledge and the learning that occurs both at the organizational and dyadic network levels. Design/methodology/approach – The paper adopts a qualitative and inductive approach with the aim of developing theory from an in-depth examination of the dyadic ties between motorsport companies and the way they share and recombine knowledge. Findings – The research shows that motorsport companies having substantial competences at managing knowledge flows do so by getting advantage of bridging ties. While bridging ties allow motorsport companies to reach distant and diverse sources of knowledge, their strengthening and the formation of relational capital facilitate the mediation and overlapping of that knowledge. Research limitations/implications – The analysis rests on a qualitative account in a single industry and does not take into account different types of inter-firm networks (e.g. alliances; constellations; consortia etc.) and governance structures. Cross-industry analyses may provide a more fine-grained picture of the practices used to recombine knowledge and the ideal composition of inter-firm ties. Practical implications – This study provides some interesting implications for scholars and managers concerned with the management of innovation activities at the interfirm level. From a managerial point of view, the recognition of the different roles played by network spanning connections is particularly salient and raises issues concerning the effective design and management of interfirm ties. Originality/value – Although much of the literature emphasizes the role of bridging ties in connecting to diverse pools of knowledge, this paper goes one step further and investigates in more depth how firms gather and combine distant and heterogeneous sources of knowledge through the use of strengthened bridging ties and a micro-context conducive to high quality relationships.

The influence of socio-cultural environments on the performance of nascent entrepreneurs:community culture, motivation, self-efficacy and start-up success

The importance of informal institutions and in particular culture for entrepreneurship is a subject of ongoing interest. Past research has mostly concentrated on cross-national comparisons, cultural values and the direct effects of culture on entrepreneurial behaviour, but in the main found inconsistent results. We add a fresh perspective to this research stream by turning attention to community-level culture and cultural norms. We hypothesize indirect effects of cultural norms on venture emergence: Community-level cultural norms (performance-based culture and socially supportive institutional norms) impact important supply-side variables (entrepreneurial self-efficacy and entrepreneurial motivation) which in turn influence nascent entrepreneurs' success in creating operational ventures (venture emergence). We test our predictions on a unique longitudinal dataset, tracking nascent entrepreneurs' venture creation efforts over a five-year time span, and find evidence supporting them. Our research contributes to a more fine-grained understanding of how culture, in particular perceptions of community cultural norms, influences venture emergence. Based on these findings, we discuss how venture creation efforts can be supported. Our research highlights the embeddedness of entrepreneurial behaviour and its immediate antecedent beliefs in the local, community context. © 2012 Copyright Taylor and Francis Group, LLC.

Dynamics of effectuation and causation in technology-based new ventures (INTERACTIVE PAPER)

The creation of new ventures is a process characterized by the need to decide and take action in the face of uncertainty, and this is particularly so in the case of technology-based ventures. Effectuation theory (Sarasvathy, 2001) has advanced two possible approaches for making decisions while facing uncertainty in the entrepreneurial process. Causation logic is based on prediction and aims at lowering uncertainty, whereas effectuation logic is based on non-predictive action and aims at working with uncertainty. This study aims to generate more fine-grained insight in the dynamics of effectuation and causation over time. We address the following questions: (1) What patterns can be found in effectual and causal behaviour of technology-based new ventures over time? And (2) How may patterns in the dynamics of effectuation and causation be explained?

Effect of cooling rate on intercritically reheated microstructure and toughness in high strength low alloy steel

High strength low alloy steels have been shown to be adversely affected by the existence of regions of poor impact toughness within the heat affected zone (HAZ) produced during multipass welding. One of these regions is the intercritically reheated coarse grained HAZ or intercritical zone. Since this region is generally narrow and discontinuous, of the order of 0.5 mm in width, weld simulators are often employed to produce a larger volume of uniform microstructure suitable for toughness assessment. The steel usedfor this study was a commercial quenched and tempered steel of 450 MN m -2 yield strength. Specimen blanks were subjected to a simulated welding cycle to produce a coarse grained structure of upper bainite during the first thermal cycle, followed by a second thermal cycle where the peak temperature T p2 was controlled. Charpy tests carried out for T p2 values in the range 650-850°C showed low toughness for T p2 values between 760 and 790°C, in the intercritical regime. Microstructural investigation of the development of grain boundary martensite-retained austenite (MA) phase has been coupled with image analysis to measure the volume fraction of MAformed. Most of the MA constituent appears at the prior austenite grain boundaries during intercritical heating, resulting in a 'necklace' appearance. For values of T p2 greater than 790°C the necklace appearance is lost and the second phase areas are observed throughout the structure. Concurrent with this is the development of the fine grained, predominantly ferritic structure that is associated with the improvement in toughness. At this stage the microstructure is transforming from the intercritical regime structure to the supercritically reheated coarse grained HAZ structure. The toughness improvement occurs even though the MA phase is still present, suggesting that the embrittlement is associated with the presence of a connected grain boundary network of the MA phase. The nature of the second phase particles can be controlled by the cooling rate during the second cycle and variesfrom MA phase at high cooling rates to a pearlitic structure at low cooling rates. The lowest toughness of the intercritical zone is observed only when MA phase is present. The reason suggested for this is that only the MA particles debond readily, a number of debonded particles in close proximity providing sufficient stress concentration to initiate local cleavage. © 1993 The Institute of Materials.

Effects of microstructure, temperature and R-ratio on fatigue crack propagation and threshold behaviour in two Ni-base alloys

Fatigue crack propagation and threshold data for two Ni-base alloys, Astroloy and Nimonic 901, are reported. At room temperature the effect which altering the load ratio (R-ratio) has on fatigue behaviour is strongly dependent on grain size. In the coarse grained microstructures crack growth rates increase and threshold values decrease markedly as R rises from 0. 1 to 0. 8, whereas only small changes in behaviour occur in fine grained material. In Astroloy, when strength level and gamma grain size are kept constant, there is very little effect of processing route and gamma prime distribution on room temperature threshold and crack propagation results. The dominant microstructural effect on this type of fatigue behaviour is the matrix ( gamma ) grain size itself.

The influence of socio-cultural environments on the performance of nascent entrepreneurs:an instrumental variable approach

The importance of informal institutions and in particular culture for entrepreneurship is a subject of ongoing interest. Past research has mostly concentrated on cross-national comparisons, cultural values, and the direct effects of culture on entrepreneurial behavior, but in the main found inconsistent results. The present research adds a fresh perspective to this research stream by turning attention to community-level culture and cultural norms. We hypothesize indirect effects of cultural norms on venture emergence. Specifically that community-level cultural norms (performance-based culture and socially-supportive institutional norms) impact important supply-side variables (entrepreneurial self-efficacy and entrepreneurial motivation) which in turn influence nascent entrepreneurs’ success in creating operational ventures (venture emergence). We test our predictions on a unique longitudinal data set (PSED II) tracking nascent entrepreneurs venture creation efforts over a 5 year time span and find evidence supporting them. Our research contributes to a more fine-grained understanding of how culture, in particular perceptions of community cultural norms, influences venture emergence. This research highlights the embeddedness of entrepreneurial behavior and its immediate antecedent beliefs in the local, community context.

Linked knowledge sources for topic classification of microposts:a semantic graph-based approach

Short text messages a.k.a Microposts (e.g. Tweets) have proven to be an effective channel for revealing information about trends and events, ranging from those related to Disaster (e.g. hurricane Sandy) to those related to Violence (e.g. Egyptian revolution). Being informed about such events as they occur could be extremely important to authorities and emergency professionals by allowing such parties to immediately respond. In this work we study the problem of topic classification (TC) of Microposts, which aims to automatically classify short messages based on the subject(s) discussed in them. The accurate TC of Microposts however is a challenging task since the limited number of tokens in a post often implies a lack of sufficient contextual information. In order to provide contextual information to Microposts, we present and evaluate several graph structures surrounding concepts present in linked knowledge sources (KSs). Traditional TC techniques enrich the content of Microposts with features extracted only from the Microposts content. In contrast our approach relies on the generation of different weighted semantic meta-graphs extracted from linked KSs. We introduce a new semantic graph, called category meta-graph. This novel meta-graph provides a more fine grained categorisation of concepts providing a set of novel semantic features. Our findings show that such category meta-graph features effectively improve the performance of a topic classifier of Microposts. Furthermore our goal is also to understand which semantic feature contributes to the performance of a topic classifier. For this reason we propose an approach for automatic estimation of accuracy loss of a topic classifier on new, unseen Microposts. We introduce and evaluate novel topic similarity measures, which capture the similarity between the KS documents and Microposts at a conceptual level, considering the enriched representation of these documents. Extensive evaluation in the context of Emergency Response (ER) and Violence Detection (VD) revealed that our approach outperforms previous approaches using single KS without linked data and Twitter data only up to 31.4% in terms of F1 measure. Our main findings indicate that the new category graph contains useful information for TC and achieves comparable results to previously used semantic graphs. Furthermore our results also indicate that the accuracy of a topic classifier can be accurately predicted using the enhanced text representation, outperforming previous approaches considering content-based similarity measures. © 2014 Elsevier B.V. All rights reserved.

Institutions, policies, and arguments:context and strategy in EU policy framing

Studies of framing in the EU political system are still a rarity and they suffer from a lack of systematic empirical analysis. Addressing this gap, we ask if institutional and policy contexts intertwined with the strategic side of framing can explain the number and types of frames employed by different stakeholders. We use a computer-assisted manual content analysis and develop a fourfold typology of frames to study the frames that were prevalent in the debates on four EU policy proposals within financial market regulation and environmental policy at the EU level and in Germany, Sweden, the Netherlands and the United Kingdom. The main empirical finding is that both contexts and strategies exert a significant impact on the number and types of frames in EU policy debates. In conceptual terms, the article contributes to developing more fine-grained tools for studying frames and their underlying dimensions.

Pub crawling at scale:tapping untappd to explore social drinking

There has been a recent surge of research looking at the reporting of food consumption on social media. The topic of alcohol consumption, however, remains poorly investigated. Social media has the potential to shed light on a topic that, traditionally, is difficult to collect fine-grained information on. One social app stands out in this regard: Untappd is an app that allows users to ‘check-in’ their consumption of beers. It operates in a similar fashion to other location-based applications, but is specifically tailored to the collection of information on beer consumption. In this paper, we explore beer consumption through the lens of social media. We crawled Untappd in real time over a period of 112 days, across 40 cities in the United States and Europe. Using this data, we shed light on the drinking habits of over 369k users. We focus on per-user and per-city characterisation, highlighting key behavioural trends.

The redoxomics of PTEN: walking a fine line between damage and signaling:mass spectrometry-based approaches to study the effect of oxidation on PTEN function, structure, and protein-protein interactions

The research described in this PhD thesis focuses on proteomics approaches to study the effect of oxidation on the modification status and protein-protein interactions of PTEN, a redox-sensitive phosphatase involved in a number of cellular processes including metabolism, apoptosis, cell proliferation, and survival. While direct evidence of a redox regulation of PTEN and its downstream signaling has been reported, the effect of cellular oxidative stress or direct PTEN oxidation on PTEN structure and interactome is still poorly defined. In a first study, GST-tagged PTEN was directly oxidized over a range of hypochlorous acid (HOCl) concentration, assayed for phosphatase activity, and oxidative post-translational modifications (oxPTMs) were quantified using LC-MS/MS-based label-free methods. In a second study, GSTtagged PTEN was prepared in a reduced and reversibly H2O2-oxidized form, immobilized on a resin support and incubated with HCT116 cell lysate to capture PTEN interacting proteins, which were analyzed by LC-MS/MS and comparatively quantified using label-free methods. In parallel experiments, HCT116 cells transfected with a GFP-tagged PTEN were treated with H2O2 and PTENinteracting proteins immunoprecipitated using standard methods. Several high abundance HOCl-induced oxPTMs were mapped, including those taking place at amino acids known to be important for PTEN phosphatase activity and protein-protein interactions, such as Met35, Tyr155, Tyr240 and Tyr315. A PTEN redox interactome was also characterized, which identified a number of PTEN-interacting proteins that vary with the reversible inactivation of PTEN caused by H2O2 oxidation. These included new PTEN interactors as well as the redox proteins peroxiredoxin-1 (Prdx1) and thioredoxin (Trx), which are known to be involved in the recycling of PTEN active site following H2O2-induced reversible inactivation. The results suggest that the oxidative modification of PTEN causes functional alterations in PTEN structure and interactome, with fundamental implications for the PTEN signaling role in many cellular processes, such as those involved in the pathophysiology of disease and ageing.