The tear film and contact lens wear

Contact lenses have become a popular method of vision correction for millions of people globally. As with all devices designed for use within the body, interactions occur between the implanted material and the surrounding biological fluid. A common complaint of lens wearers is that they often experience symptoms of dry eye whilst wearing lenses. This sensation is often heightened towards the end of the day. Through the course of this study, various analytical techniques have been utilised including one dimensional electrophoresis and Western Blotting to study the protein profiles of tear samples. By studying the tears of non-contact lens wearers, it was possible to analyse what could be considered normal, healthy, individuals. A clinical study was also undertaken which followed a population of individuals from the neophyte stage to one whereby they were accustomed lens wearers. Tears were monitored at regular intervals throughout the course of this study and worn contact lenses were also analysed for proteins that had been deposited both on and within the lens. Contact lenses disrupt the tear film in a physical manner by their very presence. They are also thought to cause the normal protein profile to deviate from what would be considered normal. The tear film deposits proteins and lipids onto and within the lens. The lens may therefore be depriving the tear film of certain necessary components. The ultimate aim of this thesis was to discover how, and to what extent, lenses affected tear proteins and if there were any proteins in the tear fluid that had the potential to be used as biochemical markers. Should this be achievable it may be possible to identify those individuals who were more likely to become intolerant lens wearers. This study followed the changes taking place to the tear film as an effect of wearing contact lenses. Twenty-eight patients wore two different types of silicone hydrogel lenses in both a daily wear and a continuous wear regime. The tear protein profiles of the lens-wearers were compared with a control group of non-lens wearing individuals. The considerable amount of data that was generated enabled the clearly observable changes to the four main tear proteins to be monitored.

Optical fibre sensors and their applications in the industrial weighing and aerospace industries

This thesis presents the design, fabrication and testing of novel grating based Optical Fibre Sensor (OFS) systems being interrogated using “off the shelf” interrogation systems, with the eventual development of marketable commercial systems at the forefront of the research. Both in the industrial weighing and aerospace industries, there has been a drive to investigate the feasibility of using optical fibre sensors being deployed where traditionally their electrical or mechanical counterparts would traditionally have been. Already, in the industrial weighing industry, commercial operators are deploying OFS-based Weigh-In-Motion (WIM) systems. Likewise, in the aerospace industry, OFS have been deployed to monitor such parameters as load history, impact detection, structural damage, overload detection, centre of gravity and the determination of blade shape. Based on the intrinsic properties of fibre Bragg gratings (FBGs) and Long Period Fibre Gratings (LPFGs), a number of novel OFS-based systems have been realised. Experimental work has shown that in the case of static industrial weighing, FBGs can be integrated with current commercial products and used to detect applied loads. The work has also shown that embedding FBGs in e-glass, to form a sensing patch, can result in said patches being bonded to rail track, forming the basis of an FBG-based WIM system. The results obtained have been sufficiently encouraging to the industrial partner that this work will be progressed beyond the scope of the work presented in this thesis. Likewise, and to the best of the author’s knowledge, a novel Bragg grating based systems for aircraft fuel parameter sensing has been presented. FBG-based pressure sensors have been shown to demonstrate good sensitivity, linearity and repeatability, whilst LPFG-based systems have demonstrated a far greater sensitivity when compared to FBGs, as well the advantage of being potentially able to detect causes of fuel adulteration based on their sensitivity to refractive index (RI). In the case of the LPFG-based system, considerable work remains to be done on the mechanical strengthening to improve its survivability in a live aircraft fuel tank environment. The FBG system has already been developed to an aerospace compliant prototype and is due to be tested at the fuel testing facility based at Airbus, Filton, UK. It is envisaged by the author that in both application areas, continued research in this area will lead to the eventual development of marketable commercial products.

Efforts towards adaptability enhancement:how manufacturing and service industries can learn from each other

This paper discusses the recent emerging efforts for adaptability enhancement of Japanese industries to cope with a volatile demand environment. It is based on an analysis of data obtained from respondent companies. The analysis is focused on both manufacturing and manufacturing- related service industries such as construction/maintenance, software supply, manufacturing consultation and logistics industries to highlight their current situation, the sense of crisis in Japanese companies and possible future directions in relation to the two industry sectors. The principal conclusion is that for most companies consideration of a revision or modification to its cost structure is an essential requirement for survival in the global competitive environment.

Performance management in the United States and France:four case studies in the retail and airline industries

The profusion of performance measurement models suggested by Management Accounting literature in the 1990’s is one illustration of the substantial changes in Management Accounting teaching materials since the publication of “Relevance Lost” in 1987. At the same time, in the general context of increasing competition and globalisation it is widely thought that national cultural differences are tending to disappear, meaning that management techniques used in large companies, including performance measurement and management instruments (PMS), tend to be the same, irrespective of the company nationality or location. North American management practice is traditionally described as a contractually based model, mainly focused on financial performance information and measures (FPMs), more shareholder-focused than French companies. Within France, literature historically defined performance as being broadly multidimensional, driven by the idea that there are no universal rules of management and that efficient management takes into account local culture and traditions. As opposed to their North American brethren, French companies are pressured more by the financial institutions that fund them rather than by capital markets. Therefore, they pay greater attention to the long-term because they are not subject to quarterly capital market objectives. Hence, management in France should rely more on long-term qualitative information, less financial, and more multidimensional data to assess performance than their North American counterparts. The objective of this research is to investigate whether large French and US companies’ practices have changed in the way the textbooks have changed with regards to performance measurement and management, or whether cultural differences are still driving differences in performance measurement and management between them. The research findings support the idea that large US and French companies share the same PMS features, influenced by ‘universal’ PM models.

Tear film lipids:dynamic composition and clinical performance

Purpose: Meibomian-derived lipid secretions are well characterised but their subsequent fate in the ocular environment is less well understood. Phospholipids are thought to facilitate the interface between aqueous and lipid layers of the tear film and to be involved in ocular lubrication processes. We have extended our previous studies on phospholipid levels in the tear film to encompass the fate of polar and non-polar lipids in progressive accumulation and aging processes on both conventional and silicone-modified hydrogel lenses. This is an important aspect of the developing understanding of the role of lipids in the clinical performance of silicone hydrogels. Method: Several techniques were used to identify lipids in the tear film. Mass-spectrometric methods included Agilent 1100-based liquid chromatography coupled to mass spectrometry (LCMS) and Perkin Elmer gas chromatography mass spectrometry (GCMS). Thin layer chromatography (TLC) was used for separation of lipids on the basis of increasing solvent polarity. Routine assay of lipid extractions from patient-worn lenses was carried out using a Hewlett Packard 1090 liquid chromatograph coupled to both uv and Agilent 1100 fluorescence detection. A range of histological together with optical, and electron microscope techniques was used in deposit analysis. Results: Progressive lipid uptake was assessed in various ways, including: composition changes with wear time, differential lipid penetrate into the lens matrix and, particularly, the extent to which lipids become unextractable as a function of wear time. Solvent-based separation and HPLC gave consistent results indicating that the polarity of lipid classes decreased as follows: phospholipids/fatty acids > triglycerides > cholesterol/cholesteryl esters. Tear lipids were found to show autofluorescence—which underpinned the value of fluorescence microscopy and fluorescence detection coupled with HPLC separation. The most fluorescent lipids were found to be cholesteryl esters; histological techniques coupled with fluorescence microscopy indicated that white spots (’’jelly bumps’’) formed on silicone hydrogel lenses contain a high proportion of cholesteryl esters. Lipid profiles averaged for 30 symptomatic and 30 asymptomatic contact lens wearers were compiled. Peak classes were split into: cholesterol (C), cholesteryl esters (CE), glycerides (G), polar fatty acids/phospholipids (PL). The lipid ratio for ymptomatic/symptomatic was 0.6 ± 0.1 for all classes except one—the cholesterol ratio was 0.2 ± 0.05. Significantly the PL ratio was no different from that of any other class except cholesterol. Chromatography indicated that: lipid polarity decreased with depth of penetration and that lipid extractability decreased with wear time. Conclusions: Meibomian lipid composition differs from that in the tear film and on worn lenses. Although the same broad lipid classes were obtained by extraction from all lenses and all patients studied, quantities vary with wear and material. Lipid extractability diminishes with wear time regardless of the use of cleaning regimes. Dry eye symptoms in contact lens wear are frequently linked to lipid layer behaviour but seem to relate more to total lipid than to specific composition. Understanding the detail of lipid related processes is an important element of improving the clinical performance of materials and care solutions.

Industry evolution and cross-sectoral skill transfers:a comparative analysis of the video game industry in Japan, the United States, and the United Kingdom

In this paper we explore the interrelationship between technological progress and the formation of industry-specific skills by analysing the evolution of the video-game industry in three countries: Japan, the United States, and the United Kingdom. We argue that the cross-sectoral transfer of skills occurs differently depending on national contexts, such as the social legitimacy and strength of preexisting industries, the socioeconomic status of entrepreneurs or pioneer firms in an emerging industry, and the sociocultural cohesiveness between the preexisting and emerging industries. Each country draws on a different set of creative resources, which results in a unique trajectory. Whereas Japan's video-game industry emerged out of corporate sponsorships in arcades, toys, and consumer electronics industries and drew skills from the comic book and animated-film sectors, the video-game industry in the United States evolved from arcades and personal computers. In the United Kingdom the video-game industry developed bottom-up, through a process of skills formation in the youth culture of 'bedroom coders' that nurtured self-taught programmers in their teens throughout the country.

Introduction: the media, animal conservation and environmental education

Natural History filmmaking has a long history but the generic boundaries between it and environmental and conservation filmmaking are blurred. Nature, environment and animal imagery has been a mainstay of television, campaigning organisations and conservation bodies from Greenpeace to the Sierra Club, with vibrant images being used effectively on posters, leaflets and postcards, and in coffee table books, media releases, short films and viral emails to educate and inform the general public. However, critics suggest that wildlife film and photography frequently convey a false image of the state of the world’s flora and fauna. The environmental educator David Orr once remarked that all education is environmental education, and it is possible to see all image-based communication in the same way. The Media, Animal Conservation and Environmental Education has contributions from filmmakers, photographers, researchers and academics from across the globe. It explores the various ways in which film, television and video are, and can be, used by conservationists and educators to encourage both a greater awareness of environmental and conservation issues, and practical action designed to help endangered species. This book is based on a special issue of the journal Environmental Education Research.

The media, animal conservation and environmental education

Natural History filmmaking has a long history but the generic boundaries between it and environmental and conservation filmmaking are blurred. Nature, environment and animal imagery has been a mainstay of television, campaigning organisations and conservation bodies from Greenpeace to the Sierra Club, with vibrant images being used effectively on posters, leaflets and postcards, and in coffee table books, media releases, short films and viral emails to educate and inform the general public. However, critics suggest that wildlife film and photography frequently convey a false image of the state of the world’s flora and fauna. The environmental educator David Orr once remarked that all education is environmental education, and it is possible to see all image-based communication in the same way. The Media, Animal Conservation and Environmental Education has contributions from filmmakers, photographers, researchers and academics from across the globe. It explores the various ways in which film, television and video are, and can be, used by conservationists and educators to encourage both a greater awareness of environmental and conservation issues, and practical action designed to help endangered species. This book is based on a special issue of the journal Environmental Education Research.

Critical practice and the public pedagogy of environmental and conservation media

Natural History filmmaking has a long history but the generic boundaries between it and environmental and conservation filmmaking are blurred. Nature, environment and animal imagery has been a mainstay of television, campaigning organisations and conservation bodies from Greenpeace to the Sierra Club, with vibrant images being used effectively on posters, leaflets and postcards, and in coffee table books, media releases, short films and viral emails to educate and inform the general public. However, critics suggest that wildlife film and photography frequently convey a false image of the state of the world’s flora and fauna. The environmental educator David Orr once remarked that all education is environmental education, and it is possible to see all image-based communication in the same way. The Media, Animal Conservation and Environmental Education has contributions from filmmakers, photographers, researchers and academics from across the globe. It explores the various ways in which film, television and video are, and can be, used by conservationists and educators to encourage both a greater awareness of environmental and conservation issues, and practical action designed to help endangered species. This book is based on a special issue of the journal Environmental Education Research.

Porous tin film synthesized by electrodeposition and the electrochemical performance for lithium-ion batteries

Porous tin films as anode for lithium-ion batteries are electrodeposited on graphite paper. Homogeneous tin films with significant void space accommodate the volume change during tin lithiation/delithiation. Through adjusting the electrodeposition currents and time, the morphologies and void space of tin films on graphite paper are controllable. At fixed electrodeposition current densities, the prolonged electrodeposition time plays the role in growing big tin particles and resulting the disappearance of void space among tin particles. The increased electrodeposition current plays the role to increase the quantity of tin seeds in thickness of tin film, and the void space among tin particles remains but the thick film limits its electrochemical performance. The tin films electrodeposited at an optimized current densities and for an optimized electrodeposition time, present the best electrochemical performance, because the tin nanoparticles are well dispersed on graphite substrate including void space. The tin film electrodeposited at 0.2 A cm-2 for 2 min shows the capacity of 1.0 mAh cm-2 after 50 charge/discharge cycles. The void space of tin film is very important for the best capacity and cyclic ability. The metallic tin film produced at 0.4 A cm-2 for 3 min remains the uniform and microporous structure after charge/discharge for 50 cycles.