Communities of implementation

The concept of communities of practice (CoPs) has rapidly gained ground in fields such as knowledge management and organisational learning since it was first identified by Lave and Wenger (1991) and Brown and Duguid (1991). In this article, we consider a related concept that we have entitled “communities of implementation.” Communities of implementation (CoIs) are similar to communities of practice in that they offer an opportunity for a collection of individuals to support each other and share knowledge in a dynamic environment and on a topic in which they share interest. In addition, and to differentiate them from CoPs, a community of implementation extends the responsibilities of a CoP by having as its focus the implementation of a programme of change. This may well extend to designing the change programme. Thus, whereas a main purpose of a CoP is to satisfy “a real need to know what each other knows” (Skyrme, 1999) in an informal way, we argue that a main purpose of a community of implementation is to “pool individual knowledge (including contacts and ways of getting things done) to stimulate collective enthusiasm in order to take more informed purposeful action for which the members are responsible.” Individual and collective responsibility and accountability for successfully implementing the actions/change programme is a key feature of a community of implementation. Without these pressures the members might lower the priority of implementation, allowing competing priorities to dominate their attention and resources. Without responsibility and accountability, the result is likely to be (at best) an organisation which has not begun a change programme, or (at worst) an organisation which is stuck halfway through another failing initiative. To achieve these additional objectives beyond those of a CoP, the CoI needs to provide heightened support to its members. In fact often the members will collectively strategise the development and implementation of the change programme they are leading in the organisation. Other concepts similar to CoPs have appeared in the literature, for example “communities of knowing” (Boland & Tenkasi, 1995), but none have a specific focus on implementation. Perhaps the closest example of a CoI, as suggested by our definition, is reported by Karsten, Lyytinen, Hurskainen, and Koskelainen (2001) who describe a CoP in a paper machinery manufacturer which seems to have the necessary focus on implementation. The theoretical aspects of this article will explore the relationship between CoPs and CoIs, and the needs for different arrangements for a CoI. The practical aspect of this article will consist of a report on a case study of a CoI that was successful in its implementation of a programme of change that aimed to improve its organisation’s knowledge management activities. Over two years the CoI implemented a suite of complementary actions across the organisation. These actions transformed the organisation and moved it towards achieving its ‘core values’ and overall objectives. The article will explore: the activities that formed and gelled the community, the role of the community in the implementation of actions, and experiences from key members of this community on its success and potential improvements.

Privatization : problems of implementation in Egypt

This study aims to investigate to what extent the views of the managers of the enterprises to be privatized are a barrier to smooth implementation of privatization as opposed to other problems. Accordingly, the research tackles two main issues: Identification and analysis of the major problems encountered in the implementation of the Egyptian privatization programme and at which level these problems exist while proposing different approaches to tackle them; and views of public sector top and middle-level managers regarding the main issues of privatization. The study relies upon a literature survey, interviews with stakeholders, a survey of managers' attitudes and several illustrative case studies. A model of "good practice" for the smooth and effective implementation of privatization has been designed. Practice in Egypt has then been studied and compared with the "good practice" model. Lack of strictness and firmness in implementing the announced privatization programme has been found to be a characteristic of Egyptian practice. This is partly attributable to the inadequacy of the programme and partly to the different obstacles to implementation. The main obstacles are doubtful desirability of privatization on the part of the managers at different implementation levels, resistance of stakeholders, in adequately of the legal framework governing privatization, redundant labour, lack of an efficient monitoring system allowing for accountability, inefficient marketing of privatization, ineffective communication, insufficient information at different levels and problems related to valuation and selling procedures. A large part of the thesis is concerned with SOE (State Owned Enterprise) managers' attitudes on and understanding of the privatization (appraised through surveys). Although most managers have stated their acceptance of privatization, many of their responses show that they do not accept selling SOEs. They understand privatization to include enterprise reform and restructuring, changing procedures and giving more authority to company executives, but not necessarily as selling SOEs. The majority of managers still see many issues that have to be addressed for smooth implementation of privatization e.g. insufficiency of information, incompleteness of legal framework, restructuring and labour problems. The main contribution to knowledge of this thesis is the study of problems of implementing privatization in developing countries especially managers' resistance to privatization as a major change, partly because of the threat it poses and partly because of the lack of understanding of privatization and implications of operating private businesses. A programme of persuading managers and offsetting the unfavourable effects is recommended as an outcome of the study. Five different phrases and words for the national Index to theses are: Egypt, privatization, implementation of privatization, problems of implementing privatization and managers' attitudes towards privatization.

GPs' perspectives on managing the NHS Health Check in primary care:a qualitative evaluation of implementation in one area of England

OBJECTIVES: To evaluate the implementation of the National Health Service (NHS) Health Check programme in one area of England from the perspective of general practitioners (GPs). DESIGN: A qualitative exploratory study was conducted with GPs and other healthcare professionals involved in delivering the NHS Health Check and with patients. This paper reports the experience of GPs and focuses on the management of the Heath Check programme in primary care. SETTING: Primary care surgeries in the Heart of Birmingham region (now under the auspices of the Birmingham Cross City Clinical Commissioning Group) were invited to take part in the larger scale evaluation. This study focuses on a subset of those surgeries whose GPs were willing to participate. PARTICIPANTS: 9 GPs from different practices volunteered. GPs served an ethnically diverse region with areas of socioeconomic deprivation. Ethnicities of participant GPs included South Asian, South Asian British, white, black British and Chinese. METHODS: Individual semistructured interviews were conducted with GPs face to face or via telephone. Thematic analysis was used to analyse verbatim transcripts. RESULTS: Themes were generated which represent GPs' experiences of managing the NHS Health Check: primary care as a commercial enterprise; 'buy in' to concordance in preventive healthcare; following protocol and support provision. These themes represent the key issues raised by GPs. They reveal variability in the implementation of NHS Health Checks. GPs also need support in allocating resources to the Health Check including training on how to conduct checks in a concordant (or collaborative) way. CONCLUSIONS: The variability observed in this small-scale evaluation corroborates existing findings suggesting a need for more standardisation. Further large-scale research is needed to determine how that could be achieved. Work needs to be done to further develop a concordant approach to lifestyle advice which involves tailored individual goal setting rather than a paternalistic advice-giving model.

Policy into practice:a study of public policy implementation and the role of learning

Public policy becomes managerial practice through a process of implementation. There is an established literature within Implementation Studies which explains the variables and some of the processes involved in implementation, but less attention has been focused upon how public service managers convert new policy initiatives into practice. The research proposes that managers and their organisations have to go through a process of learning in order to achieve the implementation of public policy. Data was collected over a five year period from four case studies of capital investment appraisal in the British National Health Service. Further data was collected from taped interviews by key actors within the case studies. The findings suggest that managers do learn to implement policy and four factors are important in this learning process. These are; (i) the nature of bureaucratic responsibility; (ii) the motivation of actors towards learning; (iii) the passage of time which allows for the development of competence and (iv) the use of project team structures. The research has demonstrated that the conversion of policy into practice occurs through the operationalisation of solutions to policy problems via job tasks. As such it suggests that in understanding how policy is implemented, technical learning is more important than cultural learning, in this context. In conclusion, a "Model of Learned Implementation" is presented, together with a discussion of some of the implications of the research. These are the possible use of more pilot projects for new policy initiatives and the more systematic diffusion of knowledge about implementation solutions.

Source coded image data in the presence of channel errors

The growth and advances made in computer technology have led to the present interest in picture processing techniques. When considering image data compression the tendency is towards trans-form source coding of the image data. This method of source coding has reached a stage where very high reductions in the number of bits representing the data can be made while still preserving image fidelity. The point has thus been reached where channel errors need to be considered, as these will be inherent in any image comnunication system. The thesis first describes general source coding of images with the emphasis almost totally on transform coding. The transform technique adopted is the Discrete Cosine Transform (DCT) which becomes common to both transform coders. Hereafter the techniques of source coding differ substantially i.e. one tech­nique involves zonal coding, the other involves threshold coding. Having outlined the theory and methods of implementation of the two source coders, their performances are then assessed first in the absence, and then in the presence, of channel errors. These tests provide a foundation on which to base methods of protection against channel errors. Six different protection schemes are then proposed. Results obtained, from each particular, combined, source and channel error protection scheme, which are described in full are then presented. Comparisons are made between each scheme and indicate the best one to use given a particular channel error rate.

An Investigation into the adoption and implementation of computer aided production management systems:using the Rogers model of adoption and implementation and a social constuctionist account of technology

The research investigates the processes of adoption and implementation, by organisations, of computer aided production management systems (CAPM). It is organised around two different theoretical perspectives. The first part is informed by the Rogers model of the diffusion, adoption and implementation of innovations, and the second part by a social constructionist approach to technology. Rogers' work is critically evaluated and a model of adoption and implementation is distilled from it and applied to a set of empirical case studies. In the light of the case study data, strengths and weaknesses of the model are identified. It is argued that the model is too rational and linear to provide an adequate explanation of adoption processes. It is useful for understanding processes of implementation but requires further development. The model is not able to adequately encompass complex computer based technologies. However, the idea of 'reinvention' is identified as Roger's key concept but it needs to be conceptually extended. Both Roger's model and definition of CAPM found in the literature from production engineering tend to treat CAPM in objectivist terms. The problems with this view are addressed through a review of the literature on the sociology of technology, and it is argued that a social constructionist approach offers a more useful framework for understanding CAPM, its nature, adoption, implementation, and use. CAPM it is argued, must be understood on terms of the ways in which it is constituted in discourse, as part of a 'struggle for meaning' on the part of academics, professional engineers, suppliers, and users.

Effectiveness and uptake of screening programmes for coronary heart disease and diabetes:a realist review of design components used in interventions

Objective - To evaluate behavioural components and strategies associated with increased uptake and effectiveness of screening for coronary heart disease and diabetes with an implementation science focus. Design - Realist review. Data sources - PubMed, Web of Knowledge, Cochrane Database of Systematic Reviews, Cochrane Controlled Trials Register and reference chaining. Searches limited to English language studies published since 1990. Eligibility criteria - Eligible studies evaluated interventions designed to increase the uptake of cardiovascular disease (CVD) and diabetes screening and examined behavioural and/or strategic designs. Studies were excluded if they evaluated changes in risk factors or cost-effectiveness only. Results - In 12 eligible studies, several different intervention designs and evidence-based strategies were evaluated. Salient themes were effects of feedback on behaviour change or benefits of health dialogues over simple feedback. Studies provide mixed evidence about the benefits of these intervention constituents, which are suggested to be situation and design specific, broadly supporting their use, but highlighting concerns about the fidelity of intervention delivery, raising implementation science issues. Three studies examined the effects of informed choice or loss versus gain frame invitations, finding no effect on screening uptake but highlighting opportunistic screening as being more successful for recruiting higher CVD and diabetes risk patients than an invitation letter, with no differences in outcomes once recruited. Two studies examined differences between attenders and non-attenders, finding higher risk factors among non-attenders and higher diagnosed CVD and diabetes among those who later dropped out of longitudinal studies. Conclusions - If the risk and prevalence of these diseases are to be reduced, interventions must take into account what we know about effective health behaviour change mechanisms, monitor delivery by trained professionals and examine the possibility of tailoring programmes according to contexts such as risk level to reach those most in need. Further research is needed to determine the best strategies for lifelong approaches to screening.

Enhancing performance through the introduction of customer orientation into the building components industry

Purpose: This paper aims to describe an investigation into how company performance can be improved by integrating internal and external customers and technology. The approach was developed, implemented and evaluated in the operations of the building components industry. The research was carried out in the precast concrete division of a Singapore company. Design/methodology/ approach: For the purpose of undertaking the investigation an exploratory case study approach was used. This was divided into conceptual and action research stages. The action research was also used to implement the changes in the company. Questionnaire surveys were carried out among company employees and external customers to assess the effect of these changes. Results of the investigation were derived using content and statistical analysis. Triangulation between three sources was used for validating the data. Findings: The exploratory case study strategy resulted in rich research data, which provided evidence of the changes taking place and integration happening, leading to improved performance. The action research approach proved a powerful tool where the uncertainty of outcomes makes it near impossible to make accurate forecasts. Another output of the research was the development of an "integrated customer orientation" (ICO) model. Research limitations/implications: The research in this paper used a single site action research investigation so should be interpreted within the specific company and industry context. There are implications for theory and practice in a number of areas of production and marketing as well as contributions to understanding about productivity improvement and organisational development. The investigation also fulfils the dual objectives of action research by contributing to both knowledge and practice. Originality/value: The paper describes a unique approach towards improving productivity, quality and service through the use of action research to implement changes, as well as providing the research evidence to evaluate both the process of implementation and results achieved. © Emerald Group Publishing Limited.

The application of physiological observation methods to emotion research

Purpose - The purpose of this paper is to examine consumer emotions and the social science and observation measures that can be utilised to capture the emotional experiences of consumers. The paper is not setting out to solve the theoretical debate surrounding emotion research, rather to provide an assessment of methodological options available to researchers to aid their investigation into both the structure and content of the consumer emotional experience, acknowledging both the conscious and subconscious elements of that experience. Design/methodology/approach - A review of a wide range of prior research from the fields of marketing, consumer behaviour, psychology and neuroscience are examined to identify the different observation methods available to marketing researchers in the study of consumer emotion. This review also considers the self report measures available to researchers and identifies the main theoretical debates concerning emotion to provide a comprehensive overview of the issues surrounding the capture of emotional responses in a marketing context and to highlight the benefits that observation methods offer this area of research. Findings - This paper evaluates three observation methods and four widely used self report measures of emotion used in a marketing context. Whilst it is recognised that marketers have shown preference for the use of self report measures in prior research, mainly due to ease of implementation, it is posited that the benefits of observation methodology and the wealth of data that can be obtained using such methods can compliment prior research. In addition, the use of observation methods cannot only enhance our understanding of the consumer emotion experience but also enable us to collaborate with researchers from other fields in order to make progress in understanding emotion. Originality/value - This paper brings perspectives and methods together to provide an up to date consideration of emotion research for marketers. In order to generate valuable research in this area there is an identified need for discussion and implementation of the observation techniques available to marketing researchers working in this field. An evaluation of a variety of methods is undertaken as a point to start discussion or consideration of different observation techniques and how they can be utilised.

Using simulation to assess the introduction of technology in a continuous operations process

Purpose – To investigate the role of simulation in the introduction of technology in a continuous operations process. Design/methodology/approach – A case-based research method was chosen with the aim to provide an exemplar of practice and test the proposition that the use of simulation can improve the implementation and running of conveyor systems in continuous process facilities. Findings – The research determines the optimum rate of re-introduction of inventory to a conveyor system generated during a breakdown event. Research limitations/implications – More case studies are required demonstrating the operational and strategic benefits that can be gained by using simulation to assess technology in organisations. Practical implications – A practical outcome of the study was the implementation of a policy for the manual re-introduction of inventory on a conveyor line after a breakdown event had occurred. Originality/value – The paper presents a novel example of the use of simulation to estimate the re-introduction rate of inventory after a breakdown event on a conveyor line. The paper highlights how by addressing this operational issue, ahead of implementation, the likelihood of the success of the strategic decision to acquire the technology can be improved.

Development of a co-operative distributed process mining system for quality assurance

In this paper, a co-operative distributed process mining system (CDPMS) is developed to streamline the workflow along the supply chain in order to offer shorter delivery times, more flexibility and higher customer satisfaction with learning ability. The proposed system is equipped with the ‘distributed process mining’ feature which is used to discover the hidden relationships among each working decision in distributed manner. This method incorporates the concept of data mining and knowledge refinement into decision making process for ensuring ‘doing the right things’ within the workflow. An example of implementation is given, based on the case of slider manufacturer.

Introduction: improving manufacturing performance through technology diffusion, implementation and management

The role of technology management in achieving improved manufacturing performance has been receiving increased attention as enterprises are becoming more exposed to competition from around the world. In the modern market for manufactured goods the demand is now for more product variety, better quality, shorter delivery and greater flexibility, while the financial and environmental cost of resources has become an urgent concern to manufacturing managers. This issue of the International Journal of Technology Management addresses the question of how the diffusion, implementation and management of technology can improve the performance of manufacturing industries. The authors come from a large number of different countries and their contributions cover a wide range of topics within this general theme. Some papers are conceptual, others report on research carried out in a range of different industries including steel production, iron founding, electronics, robotics, machinery, precision engineering, metal working and motor manufacture. In some cases they describe situations in specific countries. Several are based on presentations made at the UK Operations Management Association's Sixth International Conference held at Aston University at which the conference theme was 'Achieving Competitive Edge: Getting Ahead Through Technology and People'. The first two papers deal with questions of advanced manufacturing technology implementation and management. Firstly Beatty describes a three year longitudinal field study carried out in ten Canadian manufacturing companies using CADICAM and CIM systems. Her findings relate to speed of implementation, choice of system type, the role of individuals in implementation, organization and job design. This is followed by a paper by Bessant in which he argues that a more a strategic approach should be taken towards the management of technology in the 1990s and beyond. Also considered in this paper are the capabilities necessary in order to deploy advanced manufacturing technology as a strategic resource and the way such capabilities might be developed within the firm. These two papers, which deal largely with the implementation of hardware, are supplemented by Samson and Sohal's contribution in which they argue that a much wider perspective should be adopted based on a new approach to manufacturing strategy formulation. Technology transfer is the topic of the following two papers. Pohlen again takes the case of advanced manufacturing technology and reports on his research which considers the factors contributing to successful realisation of AMT transfer. The paper by Lee then provides a more detailed account of technology transfer in the foundry industry. Using a case study based on a firm which has implemented a number of transferred innovations a model is illustrated in which the 'performance gap' can be identified and closed. The diffusion of technology is addressed in the next two papers. In the first of these, by Lowe and Sim, the managerial technologies of 'Just in Time' and 'Manufacturing Resource Planning' (or MRP 11) are examined. A study is described from which a number of factors are found to influence the adoption process including, rate of diffusion and size. Dahlin then considers the case of a specific item of hardware technology, the industrial robot. Her paper reviews the history of robot diffusion since the early 1960s and then tries to predict how the industry will develop in the future. The following two papers deal with the future of manufacturing in a more general sense. The future implementation of advanced manufacturing technology is the subject explored by de Haan and Peters who describe the results of their Dutch Delphi forecasting study conducted among a panel of experts including scientists, consultants, users and suppliers of AMT. Busby and Fan then consider a type of organisational model, 'the extended manufacturing enterprise', which would represent a distinct alternative pure market-led and command structures by exploiting the shared knowledge of suppliers and customers. The three country-based papers consider some strategic issues relating manufacturing technology. In a paper based on investigations conducted in China He, Liff and Steward report their findings from strategy analyses carried out in the steel and watch industries with a view to assessing technology needs and organizational change requirements. This is followed by Tang and Nam's paper which examines the case of machinery industry in Korea and its emerging importance as a key sector in the Korean economy. In his paper which focuses on Venezuela, Ernst then considers the particular problem of how this country can address the problem of falling oil revenues. He sees manufacturing as being an important contributor to Venezuela's future economy and proposes a means whereby government and private enterprise can co-operate in development of the manufacturing sector. The last six papers all deal with specific topics relating to the management manufacturing. Firstly Youssef looks at the question of manufacturing flexibility, introducing and testing a conceptual model that relates computer based technologies flexibility. Dangerfield's paper which follows is based on research conducted in the steel industry. He considers the question of scale and proposes a modelling approach determining the plant configuration necessary to meet market demand. Engstrom presents the results of a detailed investigation into the need for reorganising material flow where group assembly of products has been adopted. Sherwood, Guerrier and Dale then report the findings of a study into the effectiveness of Quality Circle implementation. Stillwagon and Burns, consider how manufacturing competitiveness can be improved individual firms by describing how the application of 'human performance engineering' can be used to motivate individual performance as well as to integrate organizational goals. Finally Sohal, Lewis and Samson describe, using a case study example, how just-in-time control can be applied within the context of computer numerically controlled flexible machining lines. The papers in this issue of the International Journal of Technology Management cover a wide range of topics relating to the general question of improving manufacturing performance through the dissemination, implementation and management of technology. Although they differ markedly in content and approach, they have the collective aim addressing the concepts, principles and practices which provide a better understanding the technology of manufacturing and assist in achieving and maintaining a competitive edge.

Democratization of local government in Brazil : decentralisation and people's councils

This research studies two cases of implementation of alternative strategies for municipal government reform in Brazil, decentralisation and People's Councils. The aim is to answer the following general question: `Can decentralisation and People's Councils be a means for democratization of municipal government in Brazil?'. The hypothesis is that initiatives to reform Brazilian municipal governments face problems that are characteristic of the Brazilian political and administrative reality. These problems are considered obstacles for the development of those initiatives and accordingly, for democratization of municipal government in Brazil. After an introduction and outline in Chapter One, Chapter Two discusses four main theories concerning local government. Chapter Three discusses decentralisation and People's Councils are discussed in Chapter Four. Chapter Five presents a historical, political and economic overview of Brazil. Chapter Six deals with Brazilian Federalism and Municipal Government. The main aspects of the Municipal Government are presented as well as the development of municipal autonomy through the various Federal Constitutions and cases of People's Councils and decentralisation in municipalities in Brazil. Chapter Seven presents the political parties responsible for the initiatives, the PSDB (Brazilian Social Democratic Party) in the case of decentralisation, and the PT (Workers' Party) in the case of People's Councils. In Chapter Eight the research strategy and the data collection techniques are described. Chapters Nine and Ten present decentralisation implemented by the PSDB in Belo Horizonte, the Minas Gerais state capital and People's Councils introduced by the PT in the town of Ipatinga in the same state. Conclusions are presented in Chapter Eleven and include a comparison and discussion of the two cases. The thesis shows that these experiments with alternative strategies of local government face problems that are generally current in Brazilian political and administrative reality. Those problems are concerned with unwillingness to decentralise power, clientelism, low levels of participation of civil society and the `political' use of the structures implemented.

Aspects of the design and operation of production control systems in manufacturing industry

Computerised production control developments have concentrated on Manufacturing Resources Planning (MRP II) systems. The literature suggests however, that despite the massive investment in hardware, software and management education, successful implementation of such systems in manufacturing industries has proved difficult. This thesis reviews the development of production planning and control systems, in particular, investigates the causes of failures in implementing MRP/MRP II systems in industrial environments and argues that the centralised and top-down planning structure, as well as the routine operational methodology of such systems, is inherently prone to failure. The thesis reviews the control benefits of cellular manufacturing systems but concludes that in more dynamic manufacturing environments, techniques such as Kanban are inappropriate. The basic shortcomings of MRP II systems are highlighted and a new enhanced operational methodology based on distributed planning and control principles is introduced. Distributed Manufacturing Resources Planning (DMRP), was developed as a capacity sensitive production planning and control solution for cellular manufacturing environments. The system utilises cell based, independently operated MRP II systems, integrated into a plant-wide control system through a Local Area Network. The potential benefits of adopting the system in industrial environments is discussed and the results of computer simulation experiments to compare the performance of the DMRP system against the conventional MRP II systems presented. DMRP methodology is shown to offer significant potential advantages which include ease of implementation, cost effectiveness, capacity sensitivity, shorter manufacturing lead times, lower working in progress levels and improved customer service.