Environmental quality in residential areas : a social survey approach to improvement priorities

The research is concerned with the measurement of residents' evaluations of the environmental quality of residential areas. The research reflects the increased attention being given to residents' values in planning decisions affecting the residential environment. The work was undertaken in co-operation with a local authority which was in the process of revising its housing strategy, and in particular the priorities for improvement action. The study critically examines the existing evidence on environmental values and their relationship to the environment and points to a number of methodological and conceptual deficiencies. The research strategy developed on the basis of the research review was constrained by the need to keep any survey methods simple so that they could easily be repeated, when necessary, by the sponsoring authority. A basic perception model was assumed, and a social survey carried out to measure residents' responses to different environmental conditions. The data was only assumed to have ordinal properties, necessitating the extensive use of non-parametric statistics. Residents' expressions of satisfaction with the component elements of the environment (ranging from convenience to upkeep and privacy) were successfully related to 'objective' measures of the environment. However the survey evidence did not justify the use of the 'objective' variables as environmental standards. A method of using the social survey data directly as an aid to decision-making is discussed. Alternative models of the derivation of overall satisfaction with the environment are tested, and the values implied by the additive model compared with residents' preferences as measured directly in the survey. Residents' overall satisfactions with the residential environment were most closely related to their satisfactions with the "Appearance" and the "Reputation" of their areas. By contrast the most important directly measured preference was "Friendliness of area". The differences point to the need to define concepts used in social research clearly in operational terms, and to take care in the use of values 'measured' by different methods.

Contracts for the sale of land and personal property:the equitable interests of the purchaser

As property lawyers, we are all familiar with the general principle that a contract for the sale of land, which is capable of specific performance, operates in equity so as to confer a trust on the purchaser pending completion of the sale. Although some controversy exists as to the exact nature of the trust, it is well established that, upon exchange of contracts, equity will ‘‘treat that as done which ought to be done’’1 with the consequence that the purchaser acquires equitable ownership even though full (legal) title to the land will not pass until completion (and registration). As land is unique, specific performance is readily available in the context of sales of land where damages would, clearly, not be an adequate remedy. The same cannot be said for contracts for the purchase of personal property where invariably the subject matter is not unique and where a substitute can easily be acquired in the open market. In circumstances, however, where the property is unique or scarce (for example, a rare painting or vintage car), the maxim that ‘‘equity treats as done that which ought to be done’’ may be invoked so as to confer on the seller an equitable obligation to transfer the property to the purchaser in fulfilment of the contract. Where, therefore, the contract is specifically enforceable in this way, the seller, it is submitted, will again hold the property on trust for the purchaser where, as in a contract for the sale of land, there is an interval between the date of the contract and completion of the sale. The notion that a seller holds personal property upon trust for the purchaser pending completion of the sale is admittedly controversial, but this article seeks to argue that the same principles governing equity’s intervention in sales of land should apply in the context of sales of personalty. It is submitted that equity’s role in imposing a trust on the vendor both in relation to sales of land and personalty may be important in safeguarding the interests of the purchaser prior to, as well as after, completion of the transaction.

Extra compensation for inventive employees:is our system equitable, unbiased and motivating?

There is a presumption that invention is good. It provides us with innovative goods, services and ways of doing things leading to greater employment, wealth and health. This article looks at the two recent UK cases regarding statutory extra compensation that may be awarded to employee inventors under the Patents Act 1977. Most universities worldwide and many companies have individual inventor reward schemes. Researchers now work in teams made up of both industry and academic researchers who are often based in different countries where different legal regimes apply. Is leaving the decision to award employees extra financial compensation up to individual companies unfair, unequal and de-motivating? Is having differing legislative systems in different European countries counter productive and a barrier to economic growth? There must be a balance between the inventor and the innovator. Do we have it right and if not what should it be? Legislation: Patents Act 1977 s.39 , s.40 , s.41 Cases: Kelly v GE Healthcare Ltd [2009] EWHC 181 (Pat); [2009] R.P.C. 12 (Ch D (Patents Ct)) Shanks v Unilever Plc [2010] EWCA Civ 1283; [2011] R.P.C. 12 (CA (Civ Div))

Review of industrial temperature measurement technologies and research priorities for the thermal characterisation of the factories of the future

As the largest source of dimensional measurement uncertainty, addressing the challenges of thermal variation is vital to ensure product and equipment integrity in the factories of the future. While it is possible to closely control room temperature, this is often not practical or economical to realise in all cases where inspection is required. This article reviews recent progress and trends in seven key commercially available industrial temperature measurement sensor technologies primarily in the range of 0 °C–50 °C for invasive, semi-invasive and non-invasive measurement. These sensors will ultimately be used to measure and model thermal variation in the assembly, test and integration environment. The intended applications for these technologies are presented alongside some consideration of measurement uncertainty requirements with regard to the thermal expansion of common materials. Research priorities are identified and discussed for each of the technologies as well as temperature measurement at large. Future developments are briefly discussed to provide some insight into which direction the development and application of temperature measurement technologies are likely to head.

A new paradigm in large-scale assembly-research priorities in measurement assisted assembly

This paper presents for the first time the concept of measurement assisted assembly (MAA) and outlines the research priorities of the realisation of this concept in the industry. MAA denotes a paradigm shift in assembly for high value and complex products and encompasses the development and use of novel metrology processes for the holistic integration and capability enhancement of key assembly and ancillary processes. A complete framework for MAA is detailed showing how this can facilitate a step change in assembly process capability and efficiency for large and complex products, such as airframes, where traditional assembly processes exhibit the requirement for rectification and rework, use inflexible tooling and are largely manual, resulting in cost and cycle time pressures. The concept of MAA encompasses a range of innovativemeasurement- assisted processes which enable rapid partto- part assembly, increased use of flexible automation, traceable quality assurance and control, reduced structure weight and improved levels of precision across the dimensional scales. A full scale industrial trial of MAA technologies has been carried out on an experimental aircraft wing demonstrating the viability of the approach while studies within 140 smaller companies have highlighted the need for better adoption of existing process capability and quality control standards. The identified research priorities for MAA include the development of both frameless and tooling embedded automated metrology networks. Other research priorities relate to the development of integrated dimensional variation management, thermal compensation algorithms as well as measurement planning and inspection of algorithms linking design to measurement and process planning. © Springer-Verlag London 2013.

Servitization:revisiting the state-of-the-art and research priorities

Purpose – This paper consolidates the servitization knowledge base from an organisational change perspective, identifying developed, developing and undeveloped topics to provide a platform that directs future research. Design/methodology/approach – This paper addresses three objectives : a) it comprehensively examines organisational change management literature for selection of a theoretical framework, b) it classifies extant studies within the framework through a systemic literature review, and (c) it analyses 232 selected papers and proposes a research agenda. Findings – Analysis suggests increasing global awareness of the importance of services to manufacturers. However, some topics, especially related to servitization transformation, remain undeveloped. Research limitations/implications – Although the authors tried to include all publications relevant to servitization, some might not have been captured. Evaluation and interpretation relied on the research team and subsequent research workshops. Practical implications - One of the most significant challenges for practitioners of servitization is how to transform a manufacturing organisation to exploit the opportunity. This paper consolidates literature regarding servitization, identifying progress concerning key research topics and contributing a platform for future research. The goal is to inform research to result eventually in a roadmap for practitioners seeking to servitize. Originality/value - Although extant reviews of servitization identify themes that are examined well, they struggle to identify unanswered questions. This paper addresses this gap by focusing on servitization as a process of organisational change.