Outsourcing and offshoring engineering projects:understanding the value, sourcing models, and coordination practices

In this paper, we review recent developments in the field of outsourcing and offshoring and the implications for engineering management. We examine three aspects involved in outsourcing and offshoring, namely, sourcing models, coordination, and value extracted from outsourcing projects. We conclude that additional research is needed on recent trends in outsourcing and the impact of such change process on the practice of engineering management. © 2011 IEEE.

The precursors and impacts of BSR on AMT acquisition and implementation

This paper reports on the results of research into the connections between transaction attributes and buyer-supplier relationships (BSRs) in advanced manufacturing technology (AMT) acquisition and implementation. The investigation began by examining the impact of the different patterns of BSR on the performance of the AMT acquisition. In understanding the phenomena, the study drew upon and integrated the literature of transaction cost economics theory, BSRs, and AMT, and used this as the basis for a theoretical framework and hypotheses development. This framework was then empirically tested using data that were gathered through a questionnaire survey with 147 companies and analyzed using a structural equation modeling technique. The results of the analysis indicated that the higher the level of technological specificity and uncertainty, the more firms are likely to engage in a stronger relationship with technology suppliers. However, the complexity of the technology being implemented was associated with BSR only indirectly through its association with the level of uncertainty (which has a direct impact upon BSR). The analysis also provided strong support for the premise that developing strong BSR could lead to an improved performance in acquiring and implementing AMT. The implications of the study are offered for both the academic and practitioner audience.

Decision support system for inspection and maintenance:a case of oil pipelines

The existing method of pipeline health monitoring, which requires an entire pipeline to be inspected periodically, is unproductive. A risk-based decision support system (DSS) that reduces the amount of time spent on inspection has been presented. The risk-based DSS uses the analytic hierarchy process (AHP), a multiple attribute decision-making technique, to identify the factors that influence failure on specific segments and analyzes their effects by determining probability of occurrence of these risk factors. The severity of failure is determined through consequence analysis. From this, the effect of a failure caused by each risk factor can be established in terms of cost and the cumulative effect of failure is determined through probability analysis. The model optimizes the cost of pipeline operations by reducing subjectivity in selecting a specific inspection method, identifying and prioritizing the right pipeline segment for inspection and maintenance, deriving budget allocation, providing guidance to deploy the right mix labor for inspection and maintenance, planning emergency preparation, and deriving logical insurance plan. The proposed methodology also helps derive inspection and maintenance policy for the entire pipeline system, suggest design, operational philosophy, and construction methodology for new pipelines.

Information and Communication Technology (ICT) international spillovers

As information and communications technology (ICT) involves both traditional capital and knowledge capital, potential spillovers through various mechanisms can occur. Having tried to confirm the existence of ICT spillovers across country borders as Park et al. (Inf. Syst. Res., vol. 18, pp. 86-102, 2007), we investigate the patterns and mechanisms of international ICT spillovers. We use panel data on 37 countries from 1996 to 2004. We find that developing countries could reap more benefits from ICT spillovers than developed countries. We also find that the higher the Internet penetration rate in recipient countries, the more international ICT spillovers there might exist. Our findings are important for policy decisions regarding national trade liberalization and economic integration. Developing economies that are more open to foreign trade may have an economic advantage and may develop knowledge-intensive activities, which will lead to economic development in the long run.

A unified classification of manufacturing strategies and design processes

This article categorises manufacturing strategy design processes and presents the characteristics of resulting strategies. This work will therefore assist practitioners to appreciate the implications of planning activities. The article presents a framework for classifying manufacturing strategy processes and the resulting strategies. Each process and respective strategy is then considered in detail. In this consideration the preferred approach is presented for formulating a world class manufacturing strategy. Finally, conclusions and recommendations for further work are given.

Strategic logistics outsourcing: an integrated QFD and AHP approach

Third-party logistics service providers (3PLs) play a vital role in contemporary supply chain management. Evaluation and selection of the right 3PLs depends on a wide range of quantitative and qualitative criteria rather than cost-based factors. Although various multi-criteria decision making approaches have been proposed, they have not considered the impact of business objectives and requirements of company stakeholders on the evaluating criteria. To enable the "voice" of company stakeholders is considered, this paper develops an integrated approach for selecting 3PL strategically. In the approach, multiple evaluating criteria are derived from the requirements of company stakeholders using a series of house of quality (HOQ). The importance of evaluating criteria is prioritized with respect to the degree of achieving the stakeholder requirements using analytic hierarchy process (AHP). Based on the ranked criteria, alternative 3PLs are evaluated and compared with each other using AHP again to make an optimal selection.

Managing supply chain knowledge in the new product development process:a social network analysis approach

The aim of this paper is to propose a conceptual framework for studying the knowledge transfer problem within the supply chain. The social network analysis (SNA) is presented as a useful tool to study knowledge networks within supply chain, to visualize knowledge flows and to identify the accumulating knowledge nodes of the networks. © 2011 IEEE.

Managing the multiplicities of graduate level education! Are Master’s students’ expectations matched by their experiences?

With rapid increases in student fees reflecting moves towards a QUASI Market model of Higher Education in the UK and across much of the Western World[1], many universities find themselves having to meet progressively higher levels of student expectations[2]. This is particularly the case at undergraduate level, where increases in fees over the past decade have far exceeded inflation. Yet with so much attention on ‘consumer savvy’ undergraduates, the question of whether Master’s level students’ expectations are matched by their experiences is one which remains largely unanswered. Grounded in an empirically grounded approach to learning and teaching developed by the paper authors[3], this paper sets out to being to answer this question. In doing so it makes a distinctive contribution to debates about graduate level engineering education and concludes with a number of recommendations. Discussion: The ‘MSc: Managing Expectations’ Project analyses the expectations and experiences of Graduate level Engineering Management Students over a two year period. Focusingon the ‘student experience’, three main concepts are identified as being particular relevant to enhancing learning [3]: Relationships: Variety: Synergy. Relationships: Based on empirical research, the significance of Relationships within the academic environment is discussed with particular attention being paid to the value of students’ social and academic support networks, including academic tutoring. Variety: Grounded in a statistical analysis of ‘engagement data’ together with survey and interview findings, the concept of variety critically examines students’ perspectives and experiencesof different approaches to learning and teaching. Synergy: Possibly the most important concept discussed within this paper, the need for constructively aligned curriculum is extended to reflect the students’ apriori knowledge and experienceas well as employer and societal demands and expectations. The conclusion brings the different concepts within the discussion together, providing a set of practical recommendations for colleagues working both at graduate and undergraduate level. References 1.Gibbs, P. (2001) "Higher education as a market: a problem or solution?." Studies in Higher Education 26. 1. pp. 85-94. 2.Tricker, T., (2005) Student Expectations-How do we measure up. University of Sheffield. Available from: http://www.persons.org.uk/tricker%20paper.pdf Accessed 9/10/14 3.Clark, R. & Andrews, J. (2014). Relationships, Variety & Synergy [RVS]: The Vital Ingredients for Scholarship in Engineering Education? A Case-Study. European Journal of Engineering Education. 39.6. pp. 585-600.

Knowledge sources, innovative activity and the performance of UK new technology based firms

We present an innovation value chain analysis for a representative sample of new technology based firms (NTBFs) in the UK. This involves determining which factors lead to the usage of different knowledge sources and the relationships that exist between those sources of knowledge; the effect that each knowledge source has on innovative activity; and how innovation outputs affect the performance of NTBFs. We find that internal (i.e. R&D) and external knowledge sources are complementary for NTBFs, and that supply chain linkages have both a direct and indirect effect on innovation. NTBFs' skill resources matter throughout the innovation value chain, being positively associated with external knowledge linkages and innovation success, and also having a direct effect on growth independent of the effect on innovation. ©2010 IEEE.

A value-oriented model for managing service supply chains

Service supply chain (SSC) has attracted more and more attention from academia and industry. Although there exists extensive product-based supply chain management models and methods, they are not applicable to the SSC as the differences between service and product. Besides, the existing supply chain management models and methods possess some common deficiencies. Because of the above reasons, this paper develops a novel value-oriented model for the management of SSC using the modeling methods of E3-value and Use Case Maps (UCMs). This model can not only resolve the problems of applicability and effectiveness of the existing supply chain management models and methods, but also answer the questions of ‘why the management model is this?’ and ‘how to quantify the potential profitability of the supply chains?’. Meanwhile, the service business processes of SSC system can be established using its logic procedure. In addition, the model can also determine the value and benefits distribution of the entire service value chain and optimize the operations management performance of the service supply.

Knowledge sources, innovative activity and the performance of UK new technology based firms

We present an innovation value chain analysis for a representative sample of new technology based firms (NTBFs) in the UK. This involves determining which factors lead to the usage of different knowledge sources and the relationships that exist between those sources of knowledge; the effect that each knowledge source has on innovative activity; and how innovation outputs affect the performance of NTBFs. We find that internal (i.e. R&D) and external knowledge sources are complementary for NTBFs, and that supply chain linkages have both a direct and indirect effect on innovation. NTBFs' skill resources matter throughout the innovation value chain, being positively associated with external knowledge linkages and innovation success, and also having a direct effect on growth independent of the effect on innovation. ©2010 IEEE.

Re-engineering construction communication in distance management framework

In an exploding and fluctuating construction market, managers are facing a challenge, which is how to manage business on a wider scale and to utilize modern developments in information technology to promote productivity. The extraordinary development of telecommunications and computer technology makes it possible for people to plan, lead, control, organize and manage projects from a distance without the need to be on site on a daily basis. A modern management known as distance management (DM) or remote management is emerging. Physical distance no longer determines the boundary of management since managers can now operate projects through virtual teams that organize manpower, material and production without face-to-face communication. What organization prototype could overcome psychological and physical barriers to reengineer a successful project through information technology? What criteria distinguishes the adapted way of communication of individual activities in a teamwork and assist the integration of an efficient and effective communication between face-to-face and a physical distance? The entire methodology has been explained through a case application on refuse incineration plant projects in Taiwan.

Re-engineering materials management: a case study on an Indian refinery

Materials management function is always a major concern to the management of any industrial organisation as high inventory and an inefficient procurement process affect the profitability to a great extent. Problems multiply due to a very current business environment in India. Hence, existing materials planning and procurement processes and inventory management systems require a re-look with respect to a changing business environment. This study shows a radical improvement in materials management function of an Indian petroleum refinery through business process re-engineering (BPR) by analysing current processes, identifying key issues, deriving paradigm shifts and developing re-engineered processes through customer value analysis. BPR has been carried out on existing processes of “materials planning and procurement” and “warehousing and surplus disposal”. The re-engineered processes for materials management function trigger a few improvement projects that were identified by the group of executives who took part in the re-engineering exercise. Those projects were implemented in an integrated framework with the application of the state of art information technology tools.