Investigation of some critical aspects of on-line surface measurement by a wavelength-division-multiplexing technique

Some critical aspects of a new kind of on-line measurement technique for micro and nanoscale surface measurements are described. This attempts to use spatial light-wave scanning to replace mechanical stylus scanning, and an optical fibre interferometer to replace optically bulky interferometers for measuring the surfaces. The basic principle is based on measuring the phase shift of a reflected optical signal. Wavelength-division-multiplexing and fibre Bragg grating techniques are used to carry out wavelength-to-field transformation and phase-to-depth detection, allowing a large dynamic measurement ratio (range/resolution) and high signal-to-noise ratio with remote access. In effect the paper consists of two parts: multiplexed fibre interferometry and remote on-machine surface detection sensor (an optical dispersive probe). This paper aims to investigate the metrology properties of a multiplexed fibre interferometer and to verify its feasibility by both theoretical and experimental studies. Two types of optical probes, using a dispersive prism and a blazed grating, respectively, are introduced to realize wavelength-to-spatial scanning.

Investigation of some critical aspects of on-line surface measurement by a wavelength-division-multiplexing technique

Some critical aspects of a new kind of on-line measurement technique for micro and nanoscale surface measurements are described. This attempts to use spatial light-wave scanning to replace mechanical stylus scanning, and an optical fibre interferometer to replace optically bulky interferometers for measuring the surfaces. The basic principle is based on measuring the phase shift of a reflected optical signal. Wavelength-division-multiplexing and fibre Bragg grating techniques are used to carry out wavelength-to-field transformation and phase-to-depth detection, allowing a large dynamic measurement ratio (range/resolution) and high signal-to-noise ratio with remote access. In effect the paper consists of two parts: multiplexed fibre interferometry and remote on-machine surface detection sensor (an optical dispersive probe). This paper aims to investigate the metrology properties of a multiplexed fibre interferometer and to verify its feasibility by both theoretical and experimental studies. Two types of optical probes, using a dispersive prism and a blazed grating, respectively, are introduced to realize wavelength-to-spatial scanning.

Identification of oxidized phospholipids by electrospray ionization mass spectrometry and LC-MS using a QQLIT instrument

Phospholipids are complex and varied biomolecules that are susceptible to lipid peroxidation after attack by free radicals or electrophilic oxidants and can yield a large number of different oxidation products. There are many available methods for detecting phospholipid oxidation products, but also various limitations and problems. Electrospray ionization mass spectrometry allows the simultaneous but specific analysis of multiple species with good sensitivity and has a further advantage that it can be coupled to liquid chromatography for separation of oxidation products. Here, we explain the principles of oxidized phospholipid analysis by electrospray mass spectrometry and describe fragmentation routines for surveying the structural properties of the analytes, in particular precursor ion and neutral loss scanning. These allow targeted detection of phospholipid headgroups and identification of phospholipids containing hydroperoxides and chlorine, as well as the detection of some individual oxidation products by their specific fragmentation patterns. We describe instrument protocols for carrying out these survey routines on a QTrap5500 mass spectrometer and also for interfacing with reverse-phase liquid chromatography. The article highlights critical aspects of the analysis as well as some limitations of the methodology.

On-chip immunoprecipitation for protein purification

Immunoprecipitation (IP) is one of the most widely used and selective techniques for protein purification. Here, a miniaturised, polymer-supported immunoprecipitation (µIP) method for the on-chip purification of proteins from complex mixtures is described. A 4 µl PDMS column functionalised with covalently bound antibodies was created and all critical aspects of the µIP protocol (antibody immobilisation, blocking of potential non-specific adsorption sites, sample incubation and washing conditions) were assessed and optimised. The optimised µIP method was used to obtain purified fractions of affinity-tagged protein from a bacterial lysate.

The nature of an object-oriented program:how do practitioners understand the nature of what they are creating?

Object-oriented programming is seen as a difficult skill to master. There is considerable debate about the most appropriate way to introduce novice programmers to object-oriented concepts. Is it possible to uncover what the critical aspects or features are that enhance the learning of object-oriented programming? Practitioners have differing understandings of the nature of an object-oriented program. Uncovering these different ways of understanding leads to agreater understanding of the critical aspects and their relationship tothe structure of the program produced. A phenomenographic studywas conducted to uncover practitioner understandings of the nature of an object-oriented program. The study identified five levels of understanding and three dimensions of variation within these levels. These levels and dimensions of variation provide a framework for fostering conceptual change with respect to the nature of an object-oriented program.

Risk management in enterprise resource planning implementation:a new risk assessment framework

Enterprise resource planning (ERP) projects are risky. But if they are implemented appropriately, they can provide competitive advantage to organisations. Therefore, ERP implementation has become one of the most critical aspects of today's information management research. The main purpose of this article is to describe a new ERP risk assessment framework (RAF) that can be used to increase the success of ERP implementation. In this article, through a case study based in a leading UK-based energy service provider, we demonstrate the new RAF, which has been shown to help identify and mitigate risks in ERP implementation. In contrast to other research, this RAF identifies risks hierarchically in external engagement, programme management, work stream and work package levels across technical, schedule, operational, business and organisational categories. This not only helped to develop responses to mitigate risks but also facilitates on-going risk control.

Innovation in outsourcing:towards a practical framework

The outsourcing industry is now up for a new challenge: to understand how innovation can be realized from outsourcing engagements. While innovation has been explored and prized within businesses for decades, it is a relatively new topic in the context of outsourcing. And, as such, the perceptions regarding what innovation in outsourcing is, what inhibits or enables innovation in outsourcing, and what client firms are willing to do to ensure they benefit from innovation in outsourcing are still being defined. This paper provides insight into some of the critical aspects in innovation in which both client firms and vendors have taken interest in recent years. We go beyond the simplistic approach we have seen in some recent reports that advocates for the development of trust and close relationships between client firms and vendors as the main enablers of innovation in outsourcing. In our view, innovation in outsourcing can be properly understood only when both contractual and relational aspects are examined as well as the nature of the innovation, i.e. incremental or radical, is explored. Further, we posit that the sourcing model applied has also an impact on the ability to innovate. © 2011 Springer-Verlag.

Green manufacturing supply chain design and operations decision support

This special issue of International Journal of Production Research provides a platform for sharing the knowledge base, recent research outputs and a review of recent developments highlighting the critical aspects of green manufacturing supply chain design and operations decision support. The special issue includes 15 contributions presenting new and significant research in the relevant area. Contributions mainly present either a novel green/sustainable manufacturing supply chain design and operations decision support approach applied to a problem, or a state-of-the-art method on green/sustainable factors in supply chain design and operations. The article delineates an overview of the contributions and their significance, and an introspection on the ‘green’ factors involved.

How do practitioners understand? Practitioner perceptions of an object-oriented programming.

In the computer science community, there is considerable debate about the appropriate sequence for introducing object-oriented concepts to novice programmers. Research into novice programming has struggled to identify the critical aspects that would provide a consistently successful approach to teaching introductory object-oriented programming. Starting from the premise that the conceptions of a task determine the type of output from the task, assisting novice programmers to become aware of what the required output should be, may lay a foundation for improving learning. This study adopted a phenomenographic approach. Thirty one practitioners were interviewed about the ways in which they experience object-oriented programming and categories of description and critical aspects were identified. These critical aspects were then used to examine the spaces of learning provided in twenty introductory textbooks. The study uncovered critical aspects that related to the way that practitioners expressed their understanding of an object-oriented program and the influences on their approach to designing programs. The study of the textbooks revealed a large variability in the cover of these critical aspects.

Discursive approaches to language policy

This book brings together the fields of language policy and discourse studies from a multidisciplinary theoretical, methodological and empirical perspective. The chapters in this volume are written by international scholars active in the field of language policy and planning and discourse studies. The diverse research contexts range from education in Paraguay and Luxembourg via businesses in Wales to regional English language policies in Tajikistan. Readers are thereby invited to think critically about the mutual relationship between language policy and discourse in a range of social, political, economic and cultural spheres. Using approaches that draw on discourse-analytic, anthropological, ethnographic and critical sociolinguistic frameworks, the contributors in this collection explore and refine the ‘discursive’ and the ‘critical’ aspects of language policy as a multilayered, fluid, ideological, discursive and social process that can operate as a tool of social change as well as reinforcing established power structures and inequalities.

Aspects of design for a spare parts provisioning system

This thesis describes an investigation by the author into the spares operation of compare BroomWade Ltd. Whilst the complete system, including the warehousing and distribution functions, was investigated, the thesis concentrates on the provisioning aspect of the spares supply problem. Analysis of the historical data showed the presence of significant fluctuations in all the measures of system performance. Two Industrial Dynamics simulation models were developed to study this phenomena. The models showed that any fluctuation in end customer demand would be amplified as it passed through the distributor and warehouse stock control systems. The evidence from the historical data available supported this view of the system's operation. The models were utilised to determine which parts of the total system could be expected to exert a critical influence on its performance. The lead time parameters of the supply sector were found to be critical and further study showed that the manner in which the lead time changed with work in progress levels was also an important factor. The problem therefore resolved into the design of a spares manufacturing system. Which exhibited the appropriate dynamic performance characteristics. The gross level of entity presentation, inherent in the Industrial Dynamics methodology, was found to limit the value of these models in the development of detail design proposals. Accordingly, an interacting job shop simulation package was developed to allow detailed evaluation of organisational factors on the performance characteristics of a manufacturing system. The package was used to develop a design for a pilot spares production unit. The need for a manufacturing system to perform successfully under conditions of fluctuating demand is not limited to the spares field. Thus, although the spares exercise provides an example of the approach, the concepts and techniques developed can be considered to have broad application throughout batch manufacturing industry.

Reacting and responding in TESOL Quarterly:a generic analysis of procedure and purpose in intertextual critical exchanges

A key feature of ‘TESOL Quarterly’, a leading journal in the world of TESOL/applied linguistics, is its ‘Forum’ section which invites ‘responses and rebuttals’ from readers to any of its articles. These ‘responses or rebuttals’ form the focus of this research. In the interchanges between readers reacting to earlier research articles in TESOL Quarterly and authors responding to the said reaction I – examine the texts for evidence of genre-driven structure, whether shared between both ‘reaction’ and ‘response’ sections, or peculiar to each section, and attempt to determine the precise nature of the intended communicative purpose in particular and the implications for academic debate in general. The intended contribution of this thesis is to provide an analysis of how authors of research articles and their critics pursue their efforts beyond the research article which precipitated these exchanges in order to be recognized by their discourse community as, in the terminology of Swales (1981:51), ‘Primary Knowers’. Awareness of any principled generic process identified in this thesis may be of significance to practitioners in the applied linguistics community in their quest to establish academic reputation and in their pursuit of professional development. These findings may also be of use in triggering productive community discussion as a result of the questions they raise concerning the present nature of academic debate. Looking beyond the construction and status of the texts themselves, I inquire into the kind of ideational and social organization such exchanges keep in place and examine an alternative view of interaction. This study breaks new ground in two major ways. To the best of my knowledge, it is the first exploration of a bipartite, intertextual structure laying claim to genre status. Secondly, in its recourse to the comments of the writers’ themselves rather than relying exclusively on the evidence of their texts, as is the case with most studies of genre, this thesis offers an expanded opportunity to discuss perhaps the most interesting aspects of genre analysis – the light it throws on social ends and the role of genre in determining the nature of current academic debate as it here emerges.

Industrial networks of the future:a critical commentary on research and practice

Academia has followed the interest by companies in establishing industrial networks by studying aspects such as social interaction and contractual relationships. But what patterns underlie the emergence of industrial networks and what support should research provide for practitioners? Firstly, it seems that manufacturing is becoming a commodity rather than a unique capability, which accounts especially for low-technology approaches in downstream parts of the network, for example in assembly operations. Secondly, the increased tendency to specialize forces other parts of industrial networks to introduce advanced manufacturing technologies for niche markets. Thirdly, the capital market for investments in capacity and the trade in manufacturing as a commodity dominates resource allocation to a larger extent. Fourthly, there will be a continuous move toward more loosely connected entities forming manufacturing networks. More traditional concepts, like keiretsu and chaibol networks, do not sufficiently support this transition. Research should address these fundamental challenges to prepare for the industrial networks of 2020 and beyond.

A critical analysis of the 'amyloid cascade hypothesis'

The 'amyloid cascade hypothesis' (ACH) is the most influential model of the pathogenesis of Alzheimer's disease (AD). The hypothesis proposes that the deposition of β-amyloid (Aβ) is the initial pathological event in AD, leading to the formation of extracellular senile plaques (SP), tau-immunoreactive neurofibrillary tangles (NFT), neuronal loss, and ultimately, clinical dementia. Ever since the formulation of the ACH, however, there have been questions regarding whether it completely describes AD pathogenesis. This review critically examines various aspects of the ACH including its origin and development, the role of amyloid precursor protein (APP), whether SP and NFT are related to the development of clinical dementia, whether Aβ and tau are 'reactive' proteins, and whether there is a pathogenic relationship between SP and NFT. The results of transgenic experiments and treatments for AD designed on the basis of the ACH are also reviewed. It was concluded: (1) Aβ and tau could be the products rather than the cause of neuro-degeneration in AD, (2) it is doubtful whether there is a direct causal link between Aβ and tau, and (3) SP and NFT may not be directly related to the development of dementia, (4) transgenic models involving APP alone do not completely replicate AD pathology, and (5) treatments based on the ACH have been unsuccessful. Hence, a modification of the ACH is proposed which may provide a more complete explanation of the pathogenesis of AD.