New Europe’s new development aid

This book examines the international development policies of five East Central European new EU member states, the Czech Republic, Hungary, Poland, Slovakia and Slovenia. These countries turned from being aid recipients to donors after the turn of the millennium in the run-up to EU accession in 2004. The book explains the evolution subsequent to EU accession and current state of foreign aid policies in the region and the reasons why these deviate from many of the internationally agreed best practices in development cooperation. It argues that after the turn of the millennium, a 'Global Consensus' has emerged on how to make foreign aid more effective for development. A comparison between the elements of the Global Consensus and the performance of the five countries reveals that while they have generally implemented little of these recommendations, there are also emerging differences between the countries, with the Czech Republic and Slovenia clearly aspiring to become globally responsible donors. Building on the literatures on foreign policy analysis, international socialization and interest group influence, the book develops a model of foreign aid policy making in order to explain the general reluctance of the five countries in implementing international best practices, and also the differences in their relative performance.

Public sector efficiency, foreign aid and small island development states

This paper examines the efficiency of public sector expenditures and foreign aid at achieving social sector outcomes in Small Island Developing States (SIDS). Efficiency is estimated using a Stochastic Production Function (SPF) approach and panel data since 1990. A second stage of the analysis examines the determinants of efficiency. Results indicate that the efficiency of aid and public sectors at improving life expectancy has deteriorated during the 1990s but efficiency at improving school enrolments has increased. Higher levels of governance are associated with higher efficiency. There is also evidence to suggest that efficiency is lower in SIDS, as well as in Sub-Saharan Africa.

The role of formulation excipients in the development of lyophilised fast-disintegrating tablets

Despite recent Success, many fast-disintegrating tablets (FDTs) still face problems of low mechanical strength, poor mouth-feel and higher disintegration times. This Study aimed to optimise FDTS using a progressive three-stage approach. A series of hardness, fracturability and disintegration time tests were performed on the formulations at each stage. During Stage 1, tablets were prepared in concentrations between 2% and 5% w/w, and were formulated at each concentration as single and combination bloom strength gelatin (BSG) using 75 and 225 BSGs. Analysis revealed that both hardness and disintegration time increased with an increase in gelatin concentration. A combination (5% gelatin) FDT comprising a 50:50 ratio of 75:225 BSGs (hardness: 13.7 +/- 0.9 N and disintegration time: 24.1 +/- 0.6 s) was judged the most ideal, and was carried forward to Stage II: the addition of the saccharides sorbitol, mannitol and sucrose in concentrations between 10% and 80% w/w. The best properties were exhibited by mannitol-containing formulations (50%-hardness: 30.9 +/- 2.8 N and disintegration time: 13.3 +/- 2.1 s), which were carried forward to the next stage: the addition of viscosity-modifying polymers to improve mouth-feel and aid pre-gastric retention. Addition of carbopol 974P-NF resulted in the enhancement of viscosity with a compromise of the hardness of the tablet, whereas Pluronic F127 (6%) showed an increase in disintegration time and viscosity with retention of mechanical propel-ties. (C) 2008 Elsevier B.V. All rights reserved.

The development of a new compiler-compiler front-end

The increasing cost of developing complex software systems has created a need for tools which aid software construction. One area in which significant progress has been made is with the so-called Compiler Writing Tools (CWTs); these aim at automated generation of various components of a compiler and hence at expediting the construction of complete programming language translators. A number of CWTs are already in quite general use, but investigation reveals significant drawbacks with current CWTs, such as lex and yacc. The effective use of a CWT typically requires a detailed technical understanding of its operation and involves tedious and error-prone input preparation. Moreover, CWTs such as lex and yacc address only a limited aspect of the compilation process; for example, actions necessary to perform lexical symbol valuation and abstract syntax tree construction must be explicitly coded by the user. This thesis presents a new CWT called CORGI (COmpiler-compiler from Reference Grammar Input) which deals with the entire `front-end' component of a compiler; this includes the provision of necessary data structures and routines to manipulate them, both generated from a single input specification. Compared with earlier CWTs, CORGI has a higher-level and hence more convenient user interface, operating on a specification derived directly from a `reference manual' grammar for the source language. Rather than developing a compiler-compiler from first principles, CORGI has been implemented by building a further shell around two existing compiler construction tools, namely lex and yacc. CORGI has been demonstrated to perform efficiently in realistic tests, both in terms of speed and the effectiveness of its user interface and error-recovery mechanisms.

The development of a regional energy assessment model

Shropshire Energy Team initiated this study to examine consumption and associated emissions in the predominantly rural county of Shropshire. Current use of energy is not sustainable in the long term and there are various approaches to dealing with the environmental problems it creates. Energy planning by a local authority for a sustainable future requires detailed energy consumption and environmental information. This information would enable target setting and the implementation of policies designed to encourage energy efficiency improvements and exploitation of renewable energy resources. This could aid regeneration strategies by providing new employment opportunities. Associated reductions in carbon dioxide and other emissions would help to meet national and international environmental targets. In the absence of this detailed information, the objective was to develop a methodology to assess energy consumption and emissions on a regional basis from 1990 onwards for all local planning authorities. This would enable a more accurate assessment of the relevant issues, such that plans are more appropriate and longer lasting. A first comprehensive set of data has been gathered from a wide range of sources and a strong correlation was found between population and energy consumption for a variety of regions across the UK. In this case the methodology was applied to the county of Shropshire to give, for the first time, estimates of primary fuel consumption, electricity consumption and associated emissions in Shropshire for 1990 to 2025. The estimates provide a suitable baseline for assessing the potential contribution renewable energy could play in meeting electricity demand in the country and in reducing emissions. The assessment indicated that in 1990 total primary fuel consumption was 63,518,018 GJ/y increasing to 119,956,465 GJ/y by 2025. This is associated with emissions of 1,129,626 t/y of carbon in 1990 rising to 1,303,282 t/y by 2025. In 1990, 22,565,713 GJ/y of the primary fuel consumption was used for generating electricity rising to 23,478,050 GJ/y in 2025. If targets to reduce primary fuel consumption are reached, then emissions of carbon would fall to 1,042,626 by 2025, if renewable energy targets were also reached then emissions of carbon would fall to 988,638 t/y by 2025.

The role and relevance of non-government aid:a case study of Kenya

How effective are non-government organisations (NG0s) in their response to Third World poverty? That is the question which this thesis examines. The thesis begins with an overview of the problems facing Third World communities, and notes the way in which people in Britain have responded through NG0s. A second part of the thesis sets out the issues on which the analysis of NGOs has been made. These are: - the ways in which NGOs analyse the process of development; - the use of 'improving nutrition' and 'promoting self-reliance' as special objectives by NG0s; and - the nature of rural change, and the implications for NGOs as agents of rural development. Kenya is taken as a case study. Firstly the political and economic structure of the country is studied, and the natures of development, nutritional problems and self-reliance in the Kenyan context are noted. The study then focusses attention onto Kitui District, an area of Kenya which at the time of the study was suffering from drought. However, it is argued that the problems of Kitui District and the constraints to change there are as much a consequence of Kenya's structural underdevelopment as of reduced rainfall. Against this background the programmes of some British NGOs in the country are examined, and it is concluded that much of their work has little relevance to the principal problems which have been identified. A final part of the thesis takes a wider look at the policies and practices of NG0s. Issues such as the choice of countries in which NGOs work, how they are represented overseas, and their educational role in Britain are considered. It is concluded that while all NGOs have a concern for the conditions in which the poorest communities of the Third World live, many NGOs take a quite narrow view of development problems, giving only little recognition to the international and intranational political and economic systems which contribute to Third World poverty.

Development of an electric heat pump for domestic use

This thesis records the design and development of an electrically driven, air to water, vapour compression heat pump of nominally 6kW heat output, for residential space heating. The study was carried out on behalf of GEC Research Ltd through the Interdisciplinary Higher Degrees Scheme at Aston University. A computer based mathematical model of the vapour compression cycle was produced as a design aid, to enable the effects of component design changes or variations in operating conditions to be predicted. This model is supported by performance testing of the major components, which revealed that improvements in the compressor isentropic efficiency offer the greatest potential for further increases in cycle COPh. The evaporator was designed from first principles, and is based on wire-wound heat transfer tubing. Two evaporators, of air side area 10.27 and 16.24m2, were tested in a temperature and humidity controlled environment, demonstrating that the benefits of the large coil are greater heat pump heat output and lower noise levels. A systematic study of frost growth rates suggested that this problem is most severe at the conditions of saturated air at 0oC combined with low condenser water temperature. A dynamic simulation model was developed to predict the in-service performance of the heat pump. This study confirmed the importance of an adequate radiator area for heat pump installations. A prototype heat pump was designed and manufactured, consisting of a hermetic reciprocating compressor, a coaxial tube condenser and a helically coiled evaporator, using Refrigerant 22. The prototype was field tested in a domestic environment for one and a half years. The installation included a comprehensive monitoring system. Initial problems were encountered with defrosting and compressor noise, both of which were solved. The unit then operated throughout the 1985/86 heating season without further attention, producing a COPh of 2.34.

Development and trialling of a behavioural intervention for patients with atrial fibrillation initiating oral anticoagulation:the 'treat' study

Purpose: Atrial fibrillation (AF) is the most common heart arrhythmia and is associated with an increased risk of stroke. Stroke risk is commonly treated with oral anticoagulation (OAC) with a narrow therapeutic range (INR 2.0 to 3.0); which is poorly controlled in practice. Barriers to adherence include poor knowledge, and inaccurate perceptions surrounding illness and medications. Trial registration: ISRCTN93952605. Systematic review: Seven trials of educational, self-monitoring and decision aid interventions were included in a systematic review. Pooled analysis suggested education OR, 95% CI 7.89 (5.54-10.24) and self monitoring OR (95% CI) 5.47(2.55-8.39) significantly improve TTR; whereas decision aids are no more effective in reducing decision conflict than usual care, OR (95% CI) -0.10 (-0.17 to -0.02). Intervention development: The intervention was theoretically-driven (utilising the common sense and beliefs about medication models) and developed with expert patient feedback. Described using behavioural change techniques, the one-off group session included an educational booklet, ‘expert-patient’ focussed DVD, and worksheet. Methods: Ninety seven warfarin-naïve AF patients were randomised to receive the intervention (n=43), or usual care (n=54). The primary endpoint was time within therapeutic range (TTR), secondary endpoints included knowledge, quality of life (AF-QoL-18), beliefs about medication (BMQ), illness perceptions (IPQ-B), and anxiety and depression (HADS). Results: Intervention group had significantly higher TTR than usual care (78.5% vs. 66.7%; p=0.01). Knowledge changed significantly across time (F (3, 47) = 6.4; p<0.01), but not between groups (F (1, 47) = 3.3; p = 0.07). At six months knowledge predicted TTR (r=0.245; p=0.04). Illness concern negatively correlated with TTR (r= - 0.199; p=0.05). General Harm scores at one month predicted TTR (F (1, 72) = 4.08; p=0.048). There were significant differences in emotional representations (F (3, 49) = 3.3 (3, 49); p= 0.03), anxiety (F (3, 46) = 25.2; p<0.01) and depression (F (3, 46) = 37.7; p<0.01) across time. Conclusion: A theory-driven educational intervention can improve TTR in AF patients and potentially reduce the risk of adverse clinical outcomes. Improving education provision for AF patients is essential to ensure efficacious treatment.

Technology transfer and sustainable industrial development for developing countries

This paper reports on a part of work for the UNIDO initiative on technology transfer for sustainable industrial development. The proposed technology transfer framework, adapted from the East Asian late industrialisers model, identifies two categories of countries requiring support for enhancing their technological capabilities: (a) very late industrialisers (“low income” developing countries), and (b) slow industrialisers (countries with sizeable manufacturing sectors but limited success in gaining international competitiveness) and three technology transfer routes: (a) through trade and aid to strengthen indigenous production for domestic markets (Route 1); (b) through FDI and contracting to develop export oriented firms (Route 2), and (c) through the supply chain of capital equipment and materials to develop local subcontracting capacity (Route 3). Very late industrialisers need support to start with Route 1 in selected sectors and upgrade through imported mature technologies. Appropriate product innovations are also possible. The slow industrialisers have more scope for increased technology transfer through Routes 2 and 3.

Transition and foreign aid policies in the Visegrád countries:a path dependant approach

The paper argues that the current emerging international development policies of the Visegrád (V4) countries are heavily influenced by the certain aspects of the Communist past and the transition process. Due to these influences, the V4 countries have difficulties in adapting the foreign aid practices of Western donors and this leads to the emergence of a unique Central and Eastern European development cooperation model. As an analytical background, the paper builds on the path dependency theory of transition. A certain degree of path dependence is clearly visible in V4 foreign aid policies, and the paper analyses some aspects of this phenomenon: how these new emerging foreign aid donors select their partner countries, how much they spend on aid, how they formulate their aid delivery policies and institutions and what role the non-state actors play. The main conclusions of the paper are that the legacies of the Communist past have a clear influence and the V4 countries still have a long way to go in adapting their aid policies to international requirements.

Aid allocation of the emerging Central and Eastern European donors

This paper examines the main characteristics of the (re-)emerging foreign aid policies of the Visegrád countries (the Czech Republic, Hungary, Poland, Slovakia), concentrating on the allocation of their aid resources. I adopt an econometric approach, similar to the ones used in the literature, for analysing the aid allocation of the OECD DAC donors. Using this approach, I examine the various factors that influence aid allocation of the Visegrád countries, using data for the years between 2001 and 2008. The most important conclusion is that the amount of aid a partner country gets from the four emerging donors is not influenced by the level of poverty or the previous performance of the recipients (measured by the level of economic growth or the quality of institutions). The main determining factor seems to be geographic proximity, as countries in the Western Balkans and the Post-Soviet region receive much more aid from the Visegrád countries than other recipients. Historical ties (pre-1989 development relations) and international obligations in the cases of Afghanistan and Iraq are also found to be significant explanatory factors. This allocation is in line with the foreign political and economic interests of these new donors. Although there are clear similarities between the four donors, this paper also identifies some individual country characteristics.

State fragility and international development co-operation

Over the past few years addressing state fragility in the third world has become an important priority in international development cooperation. However, it seems that the international donor community has so far not been able to develop adequate instruments for dealing with the problems posed by state failure. We see two reasons for this: (i) there is growing recognition within the donor community that the lack of absorptive capacity, or bad economic policies in the partner country can actually make aid counterproductive, even harmful; and (ii) it is very difficult to manage effective development cooperation with weak governments. Channelling aid through NGOs, or giving limited aid in the form of capacity-building is clearly not sufficient to solve the problems fragile states face.

Parental confidence in managing food allergy:development of the Food Allergy Self-Efficacy Scale for parents (FASE-P)

Background: Food allergy is often a life-long condition that requires constant vigilance in order to prevent accidental exposure and avoid potentially life-threatening symptoms. Parents’ confidence in managing their child’s food allergy may relate to the poor quality of life anxiety and worry reported by parents of food allergic children. Objective: The aim of the current study was to develop and validate the first scale to measure parental confidence (self-efficacy) in managing food allergy in their child. Methods: The Food Allergy Self-Efficacy Scale for Parents (FASE-P) was developed through interviews with 53 parents, consultation of the literature and experts in the area. The FASE-P was then completed by 434 parents of food allergic children from a general population sample in addition to the General Self-Efficacy Scale (GSES), the Food Allergy Quality of Life Parental Burden Scale (FAQL-PB), the General Health Questionnaire (GHQ12) and the Food Allergy Impact Measure (FAIM). A total of 250 parents completed the re-test of the FASE-P. Results: Factor and reliability analysis resulted in a 21 item scale with 5 sub-scales. The overall scale and sub-scales has good to excellent internal consistency (α’s of 0.63-0.89) and the scale is stable over time. There were low to moderate significant correlations with the GSES, FAIM and GHQ12 and strong correlations with the FAQL-PB, with better parental confidence relating to better general self-efficacy, better quality of life and better mental health in the parent. Poorer self-efficacy was related to egg and milk allergy; self-efficacy was not related to severity of allergy. Conclusions and clinical relevance: The FASE-P is a reliable and valid scale for use with parents from a general population. Its application within clinical settings could aid provision of advice and improve targeted interventions by identifying areas where parents have less confidence in managing their child’s food allergy.