A technique for mitigating the effect of the writing-beam profile on fibre Bragg grating fabrication

We propose and demonstrate a pre-compensation mechanism to account for the writing-beam profile which when applied to the design of advanced fibre Bragg gratings helps to achieve a desired design spectral response. We use the example of a complex multi-channel grating as an example to demonstrate the improvement achievable using the pre- compensation and find good agreement between experimental results and numerical calculations.

Influence of beam-coupling on photorefractive parametric oscillation in a dc-field-biased Bi12SiO20 crystal

The influence of beam coupling on photorefractive parametric oscillation generated in a Bi12SiO20 crystal is investigated experimentally by comparing two configurations with and without the presence of beam coupling. It is shown that beam coupling has a great influence; for example, the transversal split of the K/2 subharmonic grating is seen only in the beam-coupling geometry. A case that resembles K/4 subharmonic generation can, however, still be found in the absence of beam coupling.

Influence of beam-coupling on photorefractive parametric oscillation in a dc-field-biased Bi12SiO20 crystal

The influence of beam coupling on photorefractive parametric oscillation generated in a Bi12SiO20 crystal is investigated experimentally by comparing two configurations with and without the presence of beam coupling. It is shown that beam coupling has a great influence; for example, the transversal split of the K/2 subharmonic grating is seen only in the beam-coupling geometry. A case that resembles K/4 subharmonic generation can, however, still be found in the absence of beam coupling.

Evaluation of Impact of Beam Size on Fibre Bragg Grating Fabrication

Fabrication of gratings has gone a long way since the onset by Kenneth Hill in 1976. Basic fabrication techniques such as holographic and phase-mask which have distinguishing advantages (variable wavelength, and high repeatability consecutively) have since been modified in an effort to combine the advantages of both methods. These basic methods are inherently simple and have few controls, they have been combined and modified over time to enable the possibility of fabricating gratings with complex modulation index and phase profiles.

Evaluation of impact of beam size on fibre Bragg grating fabrication

Fabrication of gratings has gone a long way since the onset by Kenneth Hill in 1976. Basic fabrication techniques such as holographic and phase-mask which have distinguishing advantages (variable wavelength, and high repeatability consecutively) have since been modified in an effort to combine the advantages of both methods. These basic methods are inherently simple and have few controls, they have been combined and modified over time to enable the possibility of fabricating gratings with complex modulation index and phase profiles.

Determination of excitation profile and dielectric function spatial nonuniformity in porous silicon by using WKB approach

We develop an analytical model based on the WKB approach to evaluate the experimental results of the femtosecond pump-probe measurements of the transmittance and reflectance obtained on thin membranes of porous silicon. The model allows us to retrieve a pump-induced nonuniform complex dielectric function change along the membrane depth. We show that the model fitting to the experimental data requires a minimal number of fitting parameters while still complying with the restriction imposed by the Kramers-Kronig relation. The developed model has a broad range of applications for experimental data analysis and practical implementation in the design of devices involving a spatially nonuniform dielectric function, such as in biosensing, wave-guiding, solar energy harvesting, photonics and electro-optical devices.

Computer aided design and analysis of cold formed sections

The work reported in this thesis is concerned with the improvement and expansion of the assistance given to the designer by the computer in the design of cold formed sections. The main contributions have been in four areas, which have consequently led to the fifth, the development of a methodology to optimise designs. This methodology can be considered an `Expert Design System' for cold formed sections. A different method of determining section properties of profiles was introduced, using the properties of line and circular elements. Graphics were introduced to show the outline of the profile on screen. The analysis of beam loading has been expanded to beam loading conditions where the number of supports, point loads, and uniform distributive loads can be specified by the designer. The profile can then be checked for suitability for the specified type of loading. Artificial Intelligence concepts have been introduced to give the designer decision support from the computer, in combination with the computer aided design facilities. The more complex decision support was adopted through the use of production rules. All the support was based on the British standards. A method has been introduced, by which the appropriate use of stiffeners can be determined and consequently designed by the designer. Finally, the methodology by which the designer is given assistance from the computer, without constraining the designer, was developed. This methodology gives advice to the designer on possible methods of improving the design, but allows the designer to reject that option, and analyse the profile accordingly. The methodology enables optimisation to be achieved by the designer, designing variety of profiles for a particular loading, and determining which one is best suited.

The influence of corneoscleral topography on soft contact lens fit

To evaluate the influence of peripheral ocular topography, as evaluated by optical coherence tomography (OCT), compared with traditional measures of corneal profile using keratometry and videokeratoscopy, on soft contact lens fit.

Documentation of antibiotic prescribing controls in UK NHS hospitals

Objectives: To identify the types, prevalence and nature of antibiotic prescribing control documents within NHS hospitals in the UK. Methods: A self-completion postal questionnaire was sent to each Chief Pharmacist at 465 NHS hospitals in 2001/2002. This contained questions covering hospital demographics, and hospital antibiotic prescribing control documentation, including format, dissemination, approval and review processes. Results: In total, 253 (54%) completed questionnaires were returned. Of these, 168 respondents' hospitals had an antibiotic formulary, 107 had a policy for antibiotic prescribing and 216 had guidelines on antibiotic use. All three types of antibiotic prescribing documents were used by 82 hospitals but 18 did not have any documents; 44% of formularies, 45% of policies and 35% of guidelines were available electronically. The Drug and Therapeutics Committee was the most frequently cited body for document approval and approximately one-third of documents had been approved during the current year of the questionnaire. Only about one-half of responding hospitals had an annual review of documents. Conclusions: Despite publication of high-profile national guidance in response to growing concerns regarding antimicrobial resistance, there has been little increase in the use of antibiotic prescribing control documents in NHS hospitals over the past decade. It is clear that appropriate controls for antibiotic prescribing are not yet universally applied in the UK and recommendations for action have been proposed. © The British Society for Antimicrobial Chemotherapy 2004; all rights reserved.

Computer simulation of form-roll design

Changes in modern structural design have created a demand for products which are light but possess high strength. The objective is a reduction in fuel consumption and weight of materials to satisfy both economic and environmental criteria. Cold roll forming has the potential to fulfil this requirement. The bending process is controlled by the shape of the profile machined on the periphery of the rolls. A CNC lathe can machine complicated profiles to a high standard of precision, but the expertise of a numerical control programmer is required. A computer program was developed during this project, using the expert system concept, to calculate tool paths and consequently to expedite the procurement of the machine control tapes whilst removing the need for a skilled programmer. Codifying the expertise of a human and the encapsulation of knowledge within a computer memory, destroys the dependency on highly trained people whose services can be costly, inconsistent and unreliable. A successful cold roll forming operation, where the product is geometrically correct and free from visual defects, is not easy to attain. The geometry of the sheet after travelling through the rolling mill depends on the residual strains generated by the elastic-plastic deformation. Accurate evaluation of the residual strains can provide the basis for predicting the geometry of the section. A study of geometric and material non-linearity, yield criteria, material hardening and stress-strain relationships was undertaken in this research project. The finite element method was chosen to provide a mathematical model of the bending process and, to ensure an efficient manipulation of the large stiffness matrices, the frontal solution was applied. A series of experimental investigations provided data to compare with corresponding values obtained from the theoretical modelling. A computer simulation, capable of predicting that a design will be satisfactory prior to the manufacture of the rolls, would allow effort to be concentrated into devising an optimum design where costs are minimised.

Accessibility indices and linked trips: a case study of the elderly

The confusion over the concept of accessibility in transport planning and the deficiencies of existing accessibility indices are examined by developing a conceptual framework of accessibility with a fundamental distinction being drawn between the, often conflicting, theoretical and practical dimensions. The theoretical validity of alternative indices is assessed with reference to the problems and assumptions implicit in defining, measuring, valuing and aggregating the variables and components comprising accessibility. The major deficiencies of existing indices are identified as the inability of indices to take account of the potential to link trips between more than one activity location and the level of assumptions implicit in valuing and aggregating accessibility information. In this context, it is argued that accessibility information is more appropriately expressed on a comparative basis in the form of a profile rather than as a composite single-unit index and that the present confines of accessibility measurement must be extended in line with current developments in disaggregate travel and activity modelling. The sensitivity of accessibility levels to the use of alternative value judgements, alternative forms and levels of aggregation and the inclusion of information on the potential to link trips is examined by undertaking a case study. Accessibility profiles are developed for 23 zones in the London Borough of Hammersmith and Fulham showing the accessibility of the elderly to post offices and grocers. In a practical context, the profiles assist in identifying areas and individuals with relatively poor accessibility. The incidence and nature of linked trip-making and its significance and implications for accessibility measurement are explored further by analysing the results of a survey of the elderly's travel patterns. It is concluded that future accessibility analysis should be undertaken at a disaggregate level, taking account of the potential opportunity available from nonhome as well as home origins.

The effect of thermochemical treatment on the fatigue properties of alloy steels

The effect of thermochemical treatment namely carburising on the fatigue behaviour of one carbon and two alloy steels has been studied in rotating and unidirectional bending. The effect of carbon profile on the unidirect¬ional bending fatigue strength of 63SA14 was assessed, and it was found that single stage carburising with a surface carbon content of 0.8% has resulted in a higher fatigue strength than other types of carbon profiles. Residual stresses and other metallurgical variables arising from different carbon profiles, were also considered. The highest compressive stresses h~e resulted from boost-diffuse-carburising. On the other hand surface decarburisation was associated with tensile residual stresses and a reduced fatigue strength. Retained austenite was found to be detrimental in unidirectional bending fatigue; however its presence in carburised 83SAIS did not seem to influence the rotating bending fatigue strength. Carbide particles in globular and/or intergranular form were detrimental to compressive residual stresses; the unidirectional bending fatigue strength is markedly lowered. The highest fatigue strength was accomplished by vacuum carburising. The absence of internal oxidation was the key factor in the increased fatigue strength; the presence of uniformly distributed fine carbide particles did not upset the superior fatigue strength of vacuum carburised pieces. The effect of mean stress on the fatigue strength of carburised 63SA14 was studied. Increasing the mean stress as would be expected resulted in a decreased fatigue strength. Carburisation showed its advantages at low mean stress, but at high mean stress it offers little advantage over the uncarburised hardened conditions. Notch effect was also studied in unidirectional bending of carburised 080MlS. The general trend showed that the fatigue strength decreases with increasing the stress concentration factor. But different carburising conditions have different effect on notch sensitivity.

Autonomic, biometric and oculomotor correlates of myopia in young adults

The principal work reported in this thesis is the examination of autonomic profile of ciliary muscle innervation as a risk factor in myopia development. Deficiency in sympathetic inhibitory control of accommodation has been proposed as a contributory factor in the development of late onset myopia (LOM). Complementary measurements of ocular biometry, oculomotor function and dynamic accommodation response were carried out on the same subject cohort, thus allowing cross-correlation of these factors with. autonomic profile. Subjects were undergraduate and postgraduate students of Aston University. A 2.5 year longitudinal study of refractive error progression in 40 subjects revealed the onset of LOM in 10, initially emmetropic, young adult subjects (age range 18-24 years) undertaking substantial amounts of near work. A controlled, double blind experimental protocol was conducted concurrently to measure post-task open-loop accommodative regression following distance (0 D) or near (3 D above baseline tonic accommodation) closed-loop tasks of short (10 second) or long (3 minute) duration. Closed-loop tasks consisted of observation of a high contrast Maltese cross target; open-loop conditions were imposed by observation of a 0.2 c/deg Difference of Gaussian target. Accommodation responses were recorded continuously at 42 Hz using a modified Shin-Nippon SRW-5000 open-view infra-red optometer. Blockade of the sympathetic branch of accommodative control was achieved by topical instillation of the non-selective b-adrenoceptor antagonist timolol maleate. Betaxolol hydrochloride (non-selective b1-adrenoceptor antagonist) and normal saline were employed as control agents. Retarded open-loop accommodative regression under b2 blockade following the 3 minute near task indicated the presence of sympathetic facility. Sympathetic inhibitory facility in accommodation control was found in similar proportions between LOM and stable emmetropic subjects. A cross-sectional study (N=60) of autonomic profile showed that sympathetic innervation of ciliary muscle is present in similar proportions between emmetropes, early-, and late-onset myopes. Sympathetic facility was identified in 27% of emmetropes, 21% of EOMs and 29% of LOMs.

Design of few-mode fibers with up to 12 modes and low differential mode delay

In this paper, we investigate the design of few-mode fibers (FMFs) guiding 4 to 12 non-degenerate linearly polarized (LP) modes with low differential mode delay (DMD) over the C-band, suitable for long-haul transmission. The refractive index profile considered is composed by a graded-core with a cladding trench (GCCT). The optimization of the profile parameters aims the lowest possible DMD and macro-bend losses (MBL) lower than the ITU-T standard recommendation. The optimization results show that the optimum DMD and the MBL scale with the number of modes. Additionally, it is shown that the refractive-index relative difference at the core center is one of the most preponderant parameters, allowing to reduce the DMD at the expense of increasing MBL. Finally, the optimum DMD obtained for 12 LP modes is lower than 3 ps/km. © 2014 IEEE.

Signposting for diagnosis of Autism Spectrum Disorder using the Diagnostic Interview for Social and Communication Disorders (DISCO)

Recent research has investigated the capability of the Diagnostic and Statistical Manual for Mental Disorders (DSM-5) descriptions to identify individuals who should receive a diagnosis of Autism Spectrum Disorder (ASD) using standardised diagnostic instruments. Building on previous research investigating behaviours essential for the diagnosis of DSM-5 ASD, the current study investigated the sensitivity and specificity of a set of 14 items derived from the Diagnostic Interview for Social and Communication Disorders (DISCO Signposting set) that have potential for signposting the diagnosis of autism according to both the new DSM-5 criteria for ASD and ICD-10 criteria for Childhood Autism. An algorithm threshold for the Signposting set was calculated in Sample 1 (n = 67), tested in an independent validation sample (Sample 2; n = 78), and applied across age and ability sub-groups in Sample 3 (n = 190). The algorithm had excellent predictive validity according to best estimate clinical diagnosis (Samples 1 and 2) and excellent agreement with established algorithms for both DSM-5 and ICD-10 (all samples). The signposting set has potential to inform our understanding of the profile of ASD in relation to other neurodevelopmental disorders and to form the basis of a Signposting Interview for use in clinical practice.