Response normalization and blur adaptation:data and multi-scale model

Adapting to blurred or sharpened images alters perceived blur of a focused image (M. A. Webster, M. A. Georgeson, & S. M. Webster, 2002). We asked whether blur adaptation results in (a) renormalization of perceived focus or (b) a repulsion aftereffect. Images were checkerboards or 2-D Gaussian noise, whose amplitude spectra had (log-log) slopes from -2 (strongly blurred) to 0 (strongly sharpened). Observers adjusted the spectral slope of a comparison image to match different test slopes after adaptation to blurred or sharpened images. Results did not show repulsion effects but were consistent with some renormalization. Test blur levels at and near a blurred or sharpened adaptation level were matched by more focused slopes (closer to 1/f) but with little or no change in appearance after adaptation to focused (1/f) images. A model of contrast adaptation and blur coding by multiple-scale spatial filters predicts these blur aftereffects and those of Webster et al. (2002). A key proposal is that observers are pre-adapted to natural spectra, and blurred or sharpened spectra induce changes in the state of adaptation. The model illustrates how norms might be encoded and recalibrated in the visual system even when they are represented only implicitly by the distribution of responses across multiple channels.

An accurate and scalable analytical model for IEEE 802.15.4 slotted CSMA/CA networks

In this paper a Markov chain based analytical model is proposed to evaluate the slotted CSMA/CA algorithm specified in the MAC layer of IEEE 802.15.4 standard. The analytical model consists of two two-dimensional Markov chains, used to model the state transition of an 802.15.4 device, during the periods of a transmission and between two consecutive frame transmissions, respectively. By introducing the two Markov chains a small number of Markov states are required and the scalability of the analytical model is improved. The analytical model is used to investigate the impact of the CSMA/CA parameters, the number of contending devices, and the data frame size on the network performance in terms of throughput and energy efficiency. It is shown by simulations that the proposed analytical model can accurately predict the performance of slotted CSMA/CA algorithm for uplink, downlink and bi-direction traffic, with both acknowledgement and non-acknowledgement modes.

Transdisciplinarity and reflective practice in sustainable development learning

Using various extracts from the reflective commentaries of MSc students, this article explores how transdisciplinarity and reflective practice operate in the programme. It shows how learners managed the uncertainties of sustainable development through regular critical and evaluative reflections. Students were able to apprehend the several worlds making up the sustainable development project and their own personal learning journey through the various competing, complementary and occasionally contradictory perspectives, modes of learning, sources of knowledge and information. One conceptual device facilitating this process was offering an understanding of sustainable development as constituting a ‘dialogue of values’, an approach that effectively invites students to square the metaphorical circle - i.e. broadly reconciling (ecological) sustainability with (economic) development.

A shape-based decomposition of the yield adjustment term in the arbitrage-free Nelson and Siegel (AFNS) model of the yield curve

The appealing feature of the arbitrage-free Nelson-Siegel model of the yield curve is the ability to capture movements in the yield curve through readily interpretable shifts in its level, slope or curvature, all within a dynamic arbitrage-free framework. To ensure that the level, slope and curvature factors evolve so as not to admit arbitrage, the model introduces a yield-adjustment term. This paper shows how the yield-adjustment term can also be decomposed into the familiar level, slope and curvature elements plus some additional readily interpretable shape adjustments. This means that, even in an arbitrage-free setting, it continues to be possible to interpret movements in the yield curve in terms of level, slope and curvature influences. © 2014 © 2014 Taylor & Francis.

Contrast and lustre:a model that accounts for eleven different forms of contrast discrimination in binocular vision

Our goal here is a more complete understanding of how information about luminance contrast is encoded and used by the binocular visual system. In two-interval forced-choice experiments we assessed observers' ability to discriminate changes in contrast that could be an increase or decrease of contrast in one or both eyes, or an increase in one eye coupled with a decrease in the other (termed IncDec). The base or pedestal contrasts were either in-phase or out-of-phase in the two eyes. The opposed changes in the IncDec condition did not cancel each other out, implying that along with binocular summation, information is also available from mechanisms that do not sum the two eyes' inputs. These might be monocular mechanisms. With a binocular pedestal, monocular increments of contrast were much easier to see than monocular decrements. These findings suggest that there are separate binocular (B) and monocular (L,R) channels, but only the largest of the three responses, max(L,B,R), is available to perception and decision. Results from contrast discrimination and contrast matching tasks were described very accurately by this model. Stimuli, data, and model responses can all be visualized in a common binocular contrast space, allowing a more direct comparison between models and data. Some results with out-of-phase pedestals were not accounted for by the max model of contrast coding, but were well explained by an extended model in which gratings of opposite polarity create the sensation of lustre. Observers can discriminate changes in lustre alongside changes in contrast.

Trust as a mediator of the relationship between organizational justice and work outcomes:test of a social exchange model

Data obtained from full-time employees of a public sector organization in India were used to test a social exchange model of employee work attitudes and behaviors. LISREL results revealed that whereas the three organizational justice dimensions (distributive, procedural and interactional) were related to trust in organization only interactional justice was related to trust in supervisor. The results further revealed that relative to the hypothesized fully mediated model a partially mediated model better fitted the data. Trust in organization partially mediated the relationship between distributive and procedural justice and the work attitudes of job satisfaction, turnover intentions, and organizational commitment but fully mediated the relationship between interactional justice and these work attitudes. In contrast, trust in supervisor fully mediated the relationship between interactional justice and the work behaviors of task performance and the individually- and organizationally-oriented dimensions of citizenship behavior.

The MIMIC model and formative variables:problems and solutions

The use of the multiple indicators, multiple causes model to operationalize formative variables (the formative MIMIC model) is advocated in the methodological literature. Yet, contrary to popular belief, the formative MIMIC model does not provide a valid method of integrating formative variables into empirical studies and we recommend discarding it from formative models. Our arguments rest on the following observations. First, much formative variable literature appears to conceptualize a causal structure between the formative variable and its indicators which can be tested or estimated. We demonstrate that this assumption is illogical, that a formative variable is simply a researcher-defined composite of sub-dimensions, and that such tests and estimates are unnecessary. Second, despite this, researchers often use the formative MIMIC model as a means to include formative variables in their models and to estimate the magnitude of linkages between formative variables and their indicators. However, the formative MIMIC model cannot provide this information since it is simply a model in which a common factor is predicted by some exogenous variables—the model does not integrate within it a formative variable. Empirical results from such studies need reassessing, since their interpretation may lead to inaccurate theoretical insights and the development of untested recommendations to managers. Finally, the use of the formative MIMIC model can foster fuzzy conceptualizations of variables, particularly since it can erroneously encourage the view that a single focal variable is measured with formative and reflective indicators. We explain these interlinked arguments in more detail and provide a set of recommendations for researchers to consider when dealing with formative variables.

Developing a scalable model of recombinant protein yield from Pichia pastoris:the influence of culture conditions, biomass and induction regime

Background The optimisation and scale-up of process conditions leading to high yields of recombinant proteins is an enduring bottleneck in the post-genomic sciences. Typical experiments rely on varying selected parameters through repeated rounds of trial-and-error optimisation. To rationalise this, several groups have recently adopted the 'design of experiments' (DoE) approach frequently used in industry. Studies have focused on parameters such as medium composition, nutrient feed rates and induction of expression in shake flasks or bioreactors, as well as oxygen transfer rates in micro-well plates. In this study we wanted to generate a predictive model that described small-scale screens and to test its scalability to bioreactors. Results Here we demonstrate how the use of a DoE approach in a multi-well mini-bioreactor permitted the rapid establishment of high yielding production phase conditions that could be transferred to a 7 L bioreactor. Using green fluorescent protein secreted from Pichia pastoris, we derived a predictive model of protein yield as a function of the three most commonly-varied process parameters: temperature, pH and the percentage of dissolved oxygen in the culture medium. Importantly, when yield was normalised to culture volume and density, the model was scalable from mL to L working volumes. By increasing pre-induction biomass accumulation, model-predicted yields were further improved. Yield improvement was most significant, however, on varying the fed-batch induction regime to minimise methanol accumulation so that the productivity of the culture increased throughout the whole induction period. These findings suggest the importance of matching the rate of protein production with the host metabolism. Conclusion We demonstrate how a rational, stepwise approach to recombinant protein production screens can reduce process development time.

Personal uses and perceived social and economic effects of advertising in Bulgaria and Romania

Purpose - The objective of this paper is to uncover the underlying dimensions of, and examine the similarities and differences in, personal uses of advertising, perceived socio-economic effects of advertising, and consumer beliefs and attitudes toward advertising in Bulgaria and Romania. Moreover, it aims to identify the relative importance of the predictors of attitudes toward advertising in the two countries. Design/methodology/approach - The paper draws upon findings of previous research and theoretical developments by Bauer and Greyser, Sandage and Leckenby, and Pollay and Mittal. The study uses a stratified random sample of 947 face-to-face interviews with adult respondents from major urban areas in Bulgaria (507) and Romania (440). Variables are measured on multi-item scales as a typical application of the reflective indicator model. Findings - Results show that there are significant differences between Romanian and Bulgarian respondents in terms of their attitudes toward advertising. Romanians are more positive about advertising as an institution than the instruments of advertising. Romanians seem to accept the role of advertising in a free market economy, but have less confidence in advertising claims and techniques. Bulgarian respondents seem more sceptical toward advertising in general and are less enthusiastic about embracing the role of advertising as an institution. Moreover, Bulgarians are highly negative towards the instruments advertising uses to convey its messages to consumers. Research limitations/implications - The research findings reflect the views of urban dwellers and may not be generalisable to the wider population of the two countries. Interviewer bias was reduced by eliminating verbal or non-verbal cues to the respondents, and by the use of stratified random sampling. Practical implications - The paper suggests that the regulatory role of codes of advertising practice and industry regulating bodies should be enhanced, and their ability to protect consumers enforced. Marketing campaigns should be more inclusive to involve diverse social groups and reflect generally-accepted social norms. Originality/value - This study reveals that, while general attitudes toward advertising may be similar, attitudes toward the institution and instruments of advertising may differ even in countries with geographic proximity and low cultural distance. © Emerald Group Publishing Limited.

Managing uncertainty in complex stochastic models: design and emulation of a Rabies model

In this paper we present a novel method for emulating a stochastic, or random output, computer model and show its application to a complex rabies model. The method is evaluated both in terms of accuracy and computational efficiency on synthetic data and the rabies model. We address the issue of experimental design and provide empirical evidence on the effectiveness of utilizing replicate model evaluations compared to a space-filling design. We employ the Mahalanobis error measure to validate the heteroscedastic Gaussian process based emulator predictions for both the mean and (co)variance. The emulator allows efficient screening to identify important model inputs and better understanding of the complex behaviour of the rabies model.

PCIM:a project control and inhibiting‐factors management model

In construction projects, the aim of project control is to ensure projects finish on time, within budget, and achieve other project objectives. During the last few decades, numerous project control methods have been developed and adopted by project managers in practice. However, many existing methods focus on describing what the processes and tasks of project control are; not on how these tasks should be conducted. There is also a potential gap between principles that underly these methods and project control practice. As a result, time and cost overruns are still common in construction projects, partly attributable to deficiencies of existing project control methods and difficulties in implementing them. This paper describes a new project cost and time control model, the project control and inhibiting factors management (PCIM) model, developed through a study involving extensive interaction with construction practitioners in the UK, which better reflects the real needs of project managers. A set of good practice checklist is also developed to facilitate implementation of the model. © 2013 American Society of Civil Engineers.

Model evaluation and case series data

We discuss aggregation of data from neuropsychological patients and the process of evaluating models using data from a series of patients. We argue that aggregation can be misleading but not aggregating can also result in information loss. The basis for combining data needs to be theoretically defined, and the particular method of aggregation depends on the theoretical question and characteristics of the data. We present examples, often drawn from our own research, to illustrate these points. We also argue that statistical models and formal methods of model selection are a useful way to test theoretical accounts using data from several patients in multiple-case studies or case series. Statistical models can often measure fit in a way that explicitly captures what a theory allows; the parameter values that result from model fitting often measure theoretically important dimensions and can lead to more constrained theories or new predictions; and model selection allows the strength of evidence for models to be quantified without forcing this into the artificial binary choice that characterizes hypothesis testing methods. Methods that aggregate and then formally model patient data, however, are not automatically preferred to other methods. Which method is preferred depends on the question to be addressed, characteristics of the data, and practical issues like availability of suitable patients, but case series, multiple-case studies, single-case studies, statistical models, and process models should be complementary methods when guided by theory development.