The contribution of modularity to green operations practices

This paper discusses the possible contributions from modularity and industrial condominiums towards enhancing environmental performance in the automotive industry. The research described in this study is underpinned by a review of journal articles and books on the topics of: modularity of production systems; green operations practices, and the automotive industry and sustainability. The methodology is based on theoretical analysis of the contribution of the modular production system characteristics used in the automotive industry for Green Operations Practices (GOP). The following GOPs were considered: green buildings, eco-design, green supply chains, greener manufacturing, and reverse logistics. The results are theoretical in nature; however, due to the small number of studies that investigate the relationship between modularity and sustainability, this work is relevant to increase knowledge in academic circles and among practitioners in order to understand the possible environmental benefits from modular production systems. For instance, based upon our analysis, we could deduce that the existing modular production systems in the automotive industry may contribute in different ways to the implementation of GOPs. In all types of modularity, product simplification through the use of modules can enhance environmental performance and facilitate further activities such as maintenance and repair contributing to a longer life of cars on the road. Moreover, modules will make automobiles easier to disassembly, so increasing the chances of reuse of valuable components and a better final disposal of scrap. Regarding the potential benefits of each type of modularity, it is expected that modular consortia will have a better integration of environmental practices with suppliers and seize on high efficiency during manufacturing and logistics compared with conventional production systems.

Apodised fibre Bragg grating design subject to length constraints

We investigate apodisation profiles of fibre Bragg gratings to determine key factors in filter design, using a novel apodisation technique. This highlights some practical fabrication limitations and provides important information concerning trade-offs between sidelobe suppression and bandwidth

Apodised fibre Bragg grating design subject to length constraints

We investigate apodisation profiles of fibre Bragg gratings to determine key factors in filter design, using a novel apodisation technique. This highlights some practical fabrication limitations and provides important information concerning trade-offs between sidelobe suppression and bandwidth

Towards an operations strategy for the infusion of product-centric services into manufacturing:service systems implementation

The work in this chapter is concerned with product-centric servitization. This is where a portfolio of services are formed and integrated to support product availability and use. Such servitization can be a valuable source of revenue for a manufacturer, yet little attention has been given to the configuration of the wider operations strategy that needs to be in place to deliver integrated products and services successfully. Therefore, the purpose of this chapter is to put forward a generic set of characteristics for such operations. Our intention is that these characteristics will be valuable to practitioners contemplating sophisticated forms of servitization, as they suggest the likely and significant changes that will be needed to the operations strategy of a conventional manufacturing organisation.

How green is green? A framework for environmental performance assessment in operations

This paper presents a framework based upon a relationship between environmental benefits and the investments and costs needed to implement and run company operations. As the results of environmental management become more evident it is proposed that the benefits rather than the environmental impacts are measured in the analysis of environmental performance. Four categories, or stages, are defined in this paper: “creative-green”, “expensive-green”, “inefficient-green or beginner”, and finally, the “complacent” stage. The paper describes the characteristics of each category and provides examples of indicators that could be used to measure environmental benefits. Qualitative and quantitative methods are necessary to classify companies according to the framework. It is believed that this paper can assist companies and public organisations to assess operations and projects considering their level of sustainability. The proposed framework can impact FDI and environmental policies in the public arena, and foster innovation on environmental practices within the private sector.

Servitization of manufacture:exploring the deployment and skills of people critical to the delivery of advanced services

Purpose - This "research note" sets out to fuel the debate around the practices and technologies within operations that are critical to success with servitization. It presents a study of four companies which are delivering advanced services and reports on the organisation and skill-sets of people within these. Design/methodology/approach - This has been case-based research at four manufacturers leading in their delivery of services. Findings - It describes the desirable behaviour of people in the front-line of service delivery, identifies the supporting skill-sets, how these people are organised, and explains why all these factors are so important. Originality/value - This paper contributes to the understanding of the servitization process and, in particular, the implications to broader operations of the firm. © 2013 Emerald Group Publishing Limited. All rights reserved.

Servitization of the manufacturing firm:exploring the operations practices and technologies that deliver advanced services

Purpose: This paper aims to explore practices and technologies successfully servitised manufacturers employ in the delivery of advanced services. Design/methodology/approach: A case study methodology is applied across four manufacturing organisations successful in servitization. Through interviews with personnel across host manufacturers, their partners, and key customers, extensive data are collected about service delivery systems. Analyses identify convergence in their practices and technologies. Findings: Six distinct technologies and practices are revealed: facilities and their location, micro-vertical integration and supplier relationships, information and communication technologies (ICTs), performance measurement and value demonstration, people deployment and their skills, and business processes and customer relationships. These are then combined in an integrative framework that illustrates how operations are configured to successfully deliver advanced services. Research limitations/implications: The analyses are reductive and rationalising. Future studies could identify other technologies and practices. Case study as a method is inherently limited in the extent to which findings can be generalised. Practical implications: Awareness and interest in servitization is growing, yet adoption of a servitization strategy requires particular organisational capabilities on the part of the manufacturer. This study identifies technologies and practices that underpin these capabilities. Originality/value: This paper contributes to the understanding of the servitization process and, in particular, the implications to broader operations of the firm. © Emerald Group Publishing Limited.

Theoretical perspectives in operations management:an analysis of the literature

Purpose - It is important to advance operations management (OM) knowledge while being mindful of the theoretical developments of the discipline. The purpose of this paper is to explore which theoretical perspectives have dominated the OM field. This analysis allows the authors to identify theory trends and gaps in the literature and to identify fruitful areas for future research. A reflection on theory is also practical, given that it guides research toward important questions and enlightens OM practitioners. Design/methodology/approach - The authors provide an analysis of OM theory developments in the last 30 years. The study encompasses three decades of OM publications across three OM journals and contains an analysis of over 3,000 articles so as to identify which theories, over time, have been adopted by authors in order to understand OM topics. Findings - The authors find that the majority of studies are atheoretical, empirical, and focussed upon theory testing rather than on theory development. Some theories, such as the resource-based view and contingency theory, have an enduring relevance within OM. The authors also identify theories from psychology, economics, sociology, and organizational behavior that may, in the future, have salience to explain burgeoning OM research areas such as servitization and sustainability. Research limitations/implications - The study makes a novel contribution by exploring which main theories have been adopted or developed in OM, doing so by systematically analyzing articles from the three main journals in the field (the Journal of Operations Management, Production and Operations Management, and the International Journal of Operations and Production Management), which encompass three decades of OM publications. In order to focus the study, the authors may have missed important OM articles in other journals. Practical implications - A reflection on theories is important because theories inform how a researcher or practicing manager interprets and solves OM problems. This study allows the authors to reflect on the collective OM journey to date, to spot trends and gaps in the literature, and to identify fruitful areas for future research. Originality/value - As far as the authors are aware, there has not been an assessment of the main theoretical perspectives in OM. The research also identifies which topics are published in OM journals, and which theories are adopted to investigate them. The authors also reflect on whether the most cited papers and those winning best paper awards are theoretical. This gives the authors a richer understanding of the current state of OM research.

Building a holarchy using business process-oriented holonic (PrOH) modeling

The application of systems thinking to designing, managing, and improving business processes has developed a new "holonic-based" process modeling methodology. The theoretical background and the methodology are described using examples taken from a large organization designing and manufacturing capital goods equipment operating within a complex and dynamic environment. A key point of differentiation attributed to this methodology is that it allows a set of models to be produced without taking a task breakdown approach but instead uses systems thinking and a construct known as the "holon" to build process descriptions as a system of systems (i.e., a holarchy). The process-oriented holonic modeling methodology has been used for total quality management and business process engineering exercises in different industrial sectors and builds models that connect the strategic vision of a company to its operational processes. Exercises have been conducted in response to environmental pressures to make operations align with strategic thinking as well as becoming increasingly agile and efficient. This unique methodology is best applied in environments of high complexity, low volume, and high variety, where repeated learning opportunities are few and far between (e.g., large development projects). © 2007 IEEE.

Editorial

This special issue of the Journal of the Operational Research Society is dedicated to papers on the related subjects of knowledge management and intellectual capital. These subjects continue to generate considerable interest amongst both practitioners and academics. This issue demonstrates that operational researchers have many contributions to offer to the area, especially by bringing multi-disciplinary, integrated and holistic perspectives. The papers included are both theoretical as well as practical, and include a number of case studies showing how knowledge management has been implemented in practice that may assist other organisations in their search for a better means of managing what is now recognised as a core organisational activity. It has been accepted by a growing number of organisations that the precise handling of information and knowledge is a significant factor in facilitating their success but that there is a challenge in how to implement a strategy and processes for this handling. It is here, in the particular area of knowledge process handling that we can see the contributions of operational researchers most clearly as is illustrated in the papers included in this journal edition. The issue comprises nine papers, contributed by authors based in eight different countries on five continents. Lind and Seigerroth describe an approach that they call team-based reconstruction, intended to help articulate knowledge in a particular organisational. context. They illustrate the use of this approach with three case studies, two in manufacturing and one in public sector health care. Different ways of carrying out reconstruction are analysed, and the benefits of team-based reconstruction are established. Edwards and Kidd, and Connell, Powell and Klein both concentrate on knowledge transfer. Edwards and Kidd discuss the issues involved in transferring knowledge across frontières (borders) of various kinds, from those borders within organisations to those between countries. They present two examples, one in distribution and the other in manufacturing. They conclude that trust and culture both play an important part in facilitating such transfers, that IT should be kept in a supporting role in knowledge management projects, and that a staged approach to this IT support may be the most effective. Connell, Powell and Klein consider the oft-quoted distinction between explicit and tacit knowledge, and argue that such a distinction is sometimes unhelpful. They suggest that knowledge should rather be regarded as a holistic systemic property. The consequences of this for knowledge transfer are examined, with a particular emphasis on what this might mean for the practice of OR Their view of OR in the context of knowledge management very much echoes Lind and Seigerroth's focus on knowledge for human action. This is an interesting convergence of views given that, broadly speaking, one set of authors comes from within the OR community, and the other from outside it. Hafeez and Abdelmeguid present the nearest to a 'hard' OR contribution of the papers in this special issue. In their paper they construct and use system dynamics models to investigate alternative ways in which an organisation might close a knowledge gap or skills gap. The methods they use have the potential to be generalised to any other quantifiable aspects of intellectual capital. The contribution by Revilla, Sarkis and Modrego is also at the 'hard' end of the spectrum. They evaluate the performance of public–private research collaborations in Spain, using an approach based on data envelopment analysis. They found that larger organisations tended to perform relatively better than smaller ones, even though the approach used takes into account scale effects. Perhaps more interesting was that many factors that might have been thought relevant, such as the organisation's existing knowledge base or how widely applicable the results of the project would be, had no significant effect on the performance. It may be that how well the partnership between the collaborators works (not a factor it was possible to take into account in this study) is more important than most other factors. Mak and Ramaprasad introduce the concept of a knowledge supply network. This builds on existing ideas of supply chain management, but also integrates the design chain and the marketing chain, to address all the intellectual property connected with the network as a whole. The authors regard the knowledge supply network as the natural focus for considering knowledge management issues. They propose seven criteria for evaluating knowledge supply network architecture, and illustrate their argument with an example from the electronics industry—integrated circuit design and fabrication. In the paper by Hasan and Crawford, their interest lies in the holistic approach to knowledge management. They demonstrate their argument—that there is no simple IT solution for organisational knowledge management efforts—through two case study investigations. These case studies, in Australian universities, are investigated through cultural historical activity theory, which focuses the study on the activities that are carried out by people in support of their interpretations of their role, the opportunities available and the organisation's purpose. Human activities, it is argued, are mediated by the available tools, including IT and IS and in this particular context, KMS. It is this argument that places the available technology into the knowledge activity process and permits the future design of KMS to be improved through the lessons learnt by studying these knowledge activity systems in practice. Wijnhoven concentrates on knowledge management at the operational level of the organisation. He is concerned with studying the transformation of certain inputs to outputs—the operations function—and the consequent realisation of organisational goals via the management of these operations. He argues that the inputs and outputs of this process in the context of knowledge management are different types of knowledge and names the operation method the knowledge logistics. The method of transformation he calls learning. This theoretical paper discusses the operational management of four types of knowledge objects—explicit understanding; information; skills; and norms and values; and shows how through the proposed framework learning can transfer these objects to clients in a logistical process without a major transformation in content. Millie Kwan continues this theme with a paper about process-oriented knowledge management. In her case study she discusses an implementation of knowledge management where the knowledge is centred around an organisational process and the mission, rationale and objectives of the process define the scope of the project. In her case they are concerned with the effective use of real estate (property and buildings) within a Fortune 100 company. In order to manage the knowledge about this property and the process by which the best 'deal' for internal customers and the overall company was reached, a KMS was devised. She argues that process knowledge is a source of core competence and thus needs to be strategically managed. Finally, you may also wish to read a related paper originally submitted for this Special Issue, 'Customer knowledge management' by Garcia-Murillo and Annabi, which was published in the August 2002 issue of the Journal of the Operational Research Society, 53(8), 875–884.

Herbal medicines:physician's recommendation and clinical evaluation of St.John's Wort for depression

Why some physicians recommend herbal medicines while others do not is not well understood. We undertook a survey designed to identify factors, which predict recommendation of herbal medicines by physicians in Malaysia. About a third (206 out of 626) of the physicians working at the University of Malaya Medical Centre ' were interviewed face-to-face, using a structured questionnaire. Physicians were asked about their personal use of, recommendation of, perceived interest in and, usefulness and safety of herbal medicines. Using logistic regression modelling we identified personal use, general interest, interest in receiving training, race and higher level of medical training as significant predictors of recommendation. St. John's wort is one of the most widely used herbal remedies. It is also probably the most widely evaluated herbal remedy with no fewer than 57 randomised controlled trials. Evidence from the depression trials suggests that St. John's wort is more effective than placebo while its comparative efficacy to conventional antidepressants is not well established. We updated previous meta-analyses of St. John's wort, described the characteristics of the included trials, applied methods of data imputation and transformation for incomplete trial data and examined sources of heterogeneity in the design and results of those trials. Thirty randomised controlled trials, which were heterogeneous in design, were identified. Our meta-analysis showed that St. John's wort was significantly more effective than placebo [pooled RR 1.90 (1.54-2.35)] and [Pooled WMD 4.09 (2.33 to 5.84)]. However, the remedy was similar to conventional antidepressant in its efficacy [Pooled RR I. 0 I (0.93 -1.10)] and [Pooled WMD 0.18 (- 0.66 to 1.02). Subgroup analyses of the placebo-controlled trials suggested that use of different diagnostic classifications at the inclusion stage led to different estimates of effect. Similarly a significant difference in the estimates of efficacy was observed when trials were categorised according to length of follow-up. Confounding between the variables, diagnostic classification and length of trial was shown by loglinear analysis. Despite extensive study, there is still no consensus on how effective St. lohn's wort is in depression. However, most experts would agree that it has some effect. Our meta-analysis highlights the problems associated with the clinical evaluation of herbal medicines when the active ingredients are poorly defined or unknown. The problem is compounded when the target disease (e.g. depression) is also difficult to define and different instruments are available to diagnose and evaluate it.

Failure of steel gusset plates

This thesis examines the parameters associated with the failure of triangular steel gusset plates. Eighty two results are presented investigating the position of the applied load, the gusset plate height to length ratio, size, thickness, internal angle and the removal of the inside corner. The thickness of the loaded plate and its influence on the gusset plates failure is also investigated. Twenty two similar gusset plates were tested to investigate the welds connecting the gusset plate to the adjacent loaded and support edges. The experimental results are compared with existing methods, none of which cover all the variables tested. Some methods do not consider buckling and most of those that do are inadequate. Most of the methods do not accurately take account of the load position. An alternative method based on experimental observations is presented for design purposes. The method covers any combination of the variables tested. To test assumptions made in the theoretical work forty seven strut tests took place to investigate buckling characteristics and fifteen special gusset plates were also tested. The gusset plates were found to fail in an elastic-plastic buckling manner. A gusset plate has a specific moment of resistance capacity about it’s inside corner and the ultimate load that can be applied is dependent upon the position of the load relative to the supported edge. There is an optimum height to length ratio for strength and any increase in the internal angle from 90 degrees produces little change in moment capacity. The removal of small portions of the inside corner of a gusset plate has little effect upon its moment capacity. The loaded plate does not provide any significant moment of resistance to the applied load at failure. The main functions of the loaded and supported edge welds is to prevent the gusset plate from slipping from between the plates.

House building productivity : a study of labour requirements on Scottish house building sites using activity sampling methods

This study is concerned with labour productivity in traditional house building in Scotland. Productivity is a measure of the effective use of resources and provides vital benefits that can be combined in a number of ways. The introduction gives the background to two Scottish house building sites (Blantyre and Greenfield) that were surveyed by the Building Research Establishment (BEE) activity sampling method to provide the data for the study. The study had two main objectives; (1) summary data analysis in average manhours per house between all the houses on the site, and (2) detailed data analysis in average manhours for each house block on the site. The introduction also provides a literature review related to the objectives. The method is outlined in Chapter 2, the sites are discussed in Chapter 3, and Chapter 4 covers the method application on each site and a method development made in the study. The summary data analysis (Chapter 5) compares Blantyre and Greenfield, and two previous BEE surveys in England. The main detailed data analysis consisted of three forms, (Chapters 6, 7 and 8) each applied to a set of operations. The three forms of analysis were variations in average manhours per house for each house block on the site compared with; (1) block construction order, (2) average number of separate visits per house made by operatives to each block to complete an operation, and (3) average number of different operatives per house employed on an operation in each block. Three miscellaneous items of detail data analysis are discussed in Chapter 9. The conclusions to the whole study state that considerable variations in manhours for repeated operations were discovered, that the numbers of visits by operatives to complete operations were large and that the numbers of different operatives employed in some operations were a factor related to productivity. A critique of the activity sampling method suggests that the data produced is reliable in summary form and can give a good context for more detailed data collection. For future work, this could take the form of selected operations, with the context of an activity sampling survey, that wuld be intensively surveyed by other methods.

The effect of major roads upon the local economy:a study of industrial location and its effects

The economic effects of road building (beyond those accounted for in cost-benefit analysis) are not well understood. This thesis examines the issues surrounding those effects and attempts to clarify the relationship between road building and industrial location and to identify the effect on employment of that location. The literature reviewed leads to some doubt as to the efficacy of roads as an economic tool. A scries of interviews with representatives of business and property professionals in three areas adjacent to motorways is carried out. These covered the firms' location or relocation decisions, their production costs, transport needs and employment. The conclusions drawn echo the above statements based on reviewed literature: 1. There was a general lack of knowledge of transport within a firm despite subjects' very good understanding of the rest of the firms' operations. 2. The importance of major roads to the business location decision and its perceived importance to the operations of the firms was low. Property professionals sec roads as an effective marketing tool. 3. Firms have a tendency to shed labour upon relocation although this does not necessarily constitute a net loss of employment but a redistribution. Recommendations are made for further research.

RFID in the warehouse:a literature analysis (1995-2010) of its applications, benefits, challenges and future trends

Radio Frequency Identification (RFID) has been identified as a crucial technology for the modern 21st century knowledge-based economy. Some businesses have realised benefits of RFID adoption through improvements in operational efficiency, additional cost savings, and opportunities for higher revenues. RFID research in warehousing operations has been less prominent than in other application domains. To investigate how RFID technology has had an impact in warehousing, a comprehensive analysis of research findings available from articles through leading scientific article databases has been conducted. Articles from years 1995 to 2010 have been reviewed and analysed with respect to warehouse operations, RFID application domains, benefits achieved and obstacles encountered. Four discussion topics are presented covering RFID in warehousing focusing on its applications, perceived benefits, obstacles to its adoption and future trends. This is aimed at elucidating the current state of RFID in the warehouse and providing insights for researchers to establish new research agendas and for practitioners to consider and assess the adoption of RFID in warehousing functions. © 2013 Elsevier B.V.