Flowback of solids through distribution plates of gas fluidized beds and associated phenomena

This work is concerned with a study of certain phenomena related to the performance and design of distributors in gas fluidized beds with particular regard to flowback of solid particles. The work to be described is divided into two parts. I. In Part one, a review of published material pertaining to distribution plates, including details from the patent specifications, has been prepared. After a chapter on the determination of the incipient fluidizing velocity, the following aspects of multi-orifice distributor plates in gas fluidized beds have been studied: (i) The effect of the distributor on bubble formation related to the way in which even distribution of bubbles on the top surface of the fluidized bed is obtained, e.g. the desirable pressure drop ratio ?PD/?PB for the even distribution of gas across the bed. Ratios of distributor pressure drop ?PD to bed pressure drop at which stable fluidization occurs show reasonable agreement with industrial practice. There is evidence that larger diameter beds tend to be less stable than smaller diameter beds when these are operated with shallow beds. Experiments show that in the presence of the bed the distributor pressure drop is reduced relative to the pressure drop without the bed, and this pressure drop in the former condition is regarded as the appropriate parameter for the design of the distributor. (ii) Experimental measurements of bubble distribution at the surface has been used to indicate maldistribution within the bed. Maldistribution is more likely at low gas flow rates and with distributors having large fractional free area characteristics (i.e. with distributors having low pressure drops). Bubble sizes obtained from this study, as well as those of others, have been successfully correlated. The correlation produced implies the existence of a bubble at the surface of an orifice and its growth by the addition of excess gas from the fluidized bed. (iii) For a given solid system, the amount of defluidized particles stagnating on the distributor plate is influenced by the orifice spacing, bed diameter and gas flow rate, but independent of the initial bed height and the way the orifices are arranged on the distributor plate. II. In Part two, solids flowback through single and multi-orifice distributors in two-dimensional and cylindrical beds of solids fluidized with air has been investigated. Distributors equipped with long cylindrical nozzles have also been included in the study. An equation for the prediction of free flowback of solids through multi-orifice distributors has been derived. Under fluidized conditions two regimes of flowback have been differentiated, namely Jumping and weeping. Data in the weeping regime have been successfully correlated. The limiting gas velocity through the distributor orifices at which flowback is completely excluded is found to be indepnndent of bed height, but a function of distributor design and physical properties of gas and solid used. A criterion for the prediction of this velocity has been established. The decisive advantage of increasing the distributor thickness or using nozzles to minimize solids flowback in fluidized beds has been observed and the opportunity taken to explore this poorly studied subject area. It has been noted, probably for the first time, that with long nozzles, there exists a critical nozzle length above which uncontrollable downflow of solids occurs. A theoretical model for predicting the critical length of a bundle of nozzles in terms of gas velocity through the nozzles has been set up. Theoretical calculations compared favourably with experiments.

A critical evaluation of theories of nationalism

This thesis considers the main theoretical positions within the contemporary sociology of nationalism. These can be grouped into two basic types, primordialist theories which assert that nationalism is an inevitable aspect of all human societies, and modernist theories which assert that nationalism and the nation-state first developed within western Europe in recent centuries. With respect to primordialist approaches to nationalism, it is argued that the main common explanation offered is human biological propensity. Consideration is concentrated on the most recent and plausible of such theories, sociobiology. Sociobiological accounts root nationalism and racism in genetic programming which favours close kin, or rather to the redirection of this programming in complex societies, where the social group is not a kin group. It is argued that the stated assumptions of the sociobiologists do not entail the conclusions they draw as to the roots of nationalism, and that in order to arrive at such conclusions further and implausible assumptions have to be made. With respect to modernists, the first group of writers who are considered are those, represented by Carlton Hayes, Hans Kohn and Elie Kedourie, whose main thesis is that the nation-state and nationalism are recent phenomena. Next, the two major attempts to relate nationalism and the nation-state to imperatives specific either to capitalist societies (in the `orthodox' marxist theory elaborated about the turn of the twentieth century) or to the processes of modernisation and industrialisation (the `Weberian' account of Ernest Gellner) are discussed. It is argued that modernist accounts can only be sustained by starting from a definition of nationalism and the nation-state which conflates such phenomena with others which are specific to the modern world. The marxist and Gellner accounts form the necessary starting point for any explanation as to why the nation-state is apparently the sole viable form of polity in the modern world, but their assumption that no pre-modern society was national leaves them without an adequate account of the earliest origins of the nation-state and of nationalism. Finally, a case study from the history of England argues both the achievement of a national state form and the elucidation of crucial components of a nationalist ideology were attained at a period not consistent with any of the versions of the modernist thesis.

The single-phase induction motor:a critical appraisal of the rotating-field and cross-field theories with particular reference to skin effect

The purpose of this thesis is twofold: to examine the validity of the rotating-field and cross-field theories of the single-phase induction motor when applied to a cage rotor machine; and to examine the extent to which skin effect is likely to modify the characteristics of a cage rotor machine. A mathematical analysis is presented for a single-phase induction motor in which the rotor parameters are modified by skin effect. Although this is based on the usual type of ideal machine, a new form of model rotor allows approximations for skin effect phenomena to be included as an integral part of the analysis. Performance equations appropriate to the rotating-field and cross-field theories are deduced, and the corresponding explanations for the steady-state mode of operation are critically examined. The evaluation of the winding currents and developed torque is simplified by the introduction of new dimensionless factors which are functions of the resistance/reactance ratios of the rotor and the speed. Tables of the factors are included for selected numerical values of the parameter ratios, and these are used to deduce typical operating characteristics for both cage and wound rotor machines. It is shown that a qualitative explanation of the mode of operation of a cage rotor machine is obtained from either theory; but the operating characteristics must be deduced from the performance equations of the rotating-field theory, because of the restrictions on the values of the rotor parameters imposed by skin effect.