Humans assume a mixture of diffuse and point-source lighting when viewing sinusoidal shading patterns

Observers perceive sinusoidal shading patterns as being due to sinusoidally corrugated surfaces, and perceive surface peaks to be offset from luminance maxima by between zero and 1/4 wavelength. This offset varies with grating orientation. Physically, the shading profile of a sinusoidal surface will be approximately sinusoidal, with the same spatial frequency as the surface, only when: (A) it is lit suitably obliquely by a point source, or (B) the light source is diffuse and hemispherical--the 'dark is deep' rule applies. For A, surface peaks will be offset by 1/4 wavelength from the luminance maxima; for B, this offset will be zero. As the sum of two same-frequency sinusoids with different phases is a sinusoid of intermediate phase, our results suggest that observers assume a mixture of two light sources whose relative strength varies with grating orientation. The perceived surface offsets imply that gratings close to horizontal are taken to be lit by a point source; those close to vertical by a diffuse source. [Supported by EPSRC grants to AJS and MAG].

Sun and sky:does human vision assume a mixture of point and diffuse illumination when interpreting shape-from-shading?

People readily perceive smooth luminance variations as being due to the shading produced by undulations of a 3-D surface (shape-from-shading). In doing so, the visual system must simultaneously estimate the shape of the surface and the nature of the illumination. Remarkably, shape-from-shading operates even when both these properties are unknown and neither can be estimated directly from the image. In such circumstances humans are thought to adopt a default illumination model. A widely held view is that the default illuminant is a point source located above the observer's head. However, some have argued instead that the default illuminant is a diffuse source. We now present evidence that humans may adopt a flexible illumination model that includes both diffuse and point source elements. Our model estimates a direction for the point source and then weights the contribution of this source according to a bias function. For most people the preferred illuminant direction is overhead with a strong diffuse component.

River basin surveillance using remotely sensed data: a water resources information management system

This thesis describes the development of an operational river basin water resources information management system. The river or drainage basin is the fundamental unit of the system; in both the modelling and prediction of hydrological processes, and in the monitoring of the effect of catchment management policies. A primary concern of the study is the collection of sufficient and sufficiently accurate information to model hydrological processes. Remote sensing, in combination with conventional point source measurement, can be a valuable source of information, but is often overlooked by hydrologists, due to the cost of acquisition and processing. This thesis describes a number of cost effective methods of acquiring remotely sensed imagery, from airborne video survey to real time ingestion of meteorological satellite data. Inexpensive micro-computer systems and peripherals are used throughout to process and manipulate the data. Spatial information systems provide a means of integrating these data with topographic and thematic cartographic data, and historical records. For the system to have any real potential the data must be stored in a readily accessible format and be easily manipulated within the database. The design of efficient man-machine interfaces and the use of software enginering methodologies are therefore included in this thesis as a major part of the design of the system. The use of low cost technologies, from micro-computers to video cameras, enables the introduction of water resources information management systems into developing countries where the potential benefits are greatest.

The use of Meteosat satellite data for spatial rainfall estimations and hydrological simulations

Satellite information, in combination with conventional point source measurements, can be a valuable source of information. This thesis is devoted to the spatial estimation of areal rainfall over a region using both the measurements from a dense and sparse network of rain-gauges and images from the meteorological satellites. A primary concern is to study the effects of such satellite assisted rainfall estimates on the performance of rainfall-runoff models. Low-cost image processing systems and peripherals are used to process and manipulate the data. Both secondary as well as primary satellite images were used for analysis. The secondary data was obtained from the in-house satellite receiver and the primary data was obtained from an outside source. Ground truth data was obtained from the local Water Authority. A number of algorithms are presented that combine the satellite and conventional data sources to produce areal rainfall estimates and the results are compared with some of the more traditional methodologies. The results indicate that the satellite cloud information is valuable in the assessment of the spatial distribution of areal rainfall, for both half-hourly as well as daily estimates of rainfall. It is also demonstrated how the performance of the simple multiple regression rainfall-runoff model is improved when satellite cloud information is used as a separate input in addition to rainfall estimates from conventional means. The use of low-cost equipment, from image processing systems to satellite imagery, makes it possible for developing countries to introduce such systems in areas where the benefits are greatest.

Properties of a method of fundamental solutions for the parabolic heat equation

We show that a set of fundamental solutions to the parabolic heat equation, with each element in the set corresponding to a point source located on a given surface with the number of source points being dense on this surface, constitute a linearly independent and dense set with respect to the standard inner product of square integrable functions, both on lateral- and time-boundaries. This result leads naturally to a method of numerically approximating solutions to the parabolic heat equation denoted a method of fundamental solutions (MFS). A discussion around convergence of such an approximation is included.

Macro determinants of FDI inflows to Japan:an analysis of source country characteristics

This paper examines the source country determinants of FDI into Japan. The paper highlights certain methodological and theoretical weaknesses in the previous literature and offers some explanations for hitherto ambiguous results. Specifically, the paper highlights the importance of panel data analysis, and the identification of fixed effects in the analysis rather than simply pooling the data. Indeed, we argue that many of the results reported elsewhere are a feature of this mis-specification. To this end, pooled, fixed effects and random effects estimates are compared. The results suggest that FDI into Japan is inversely related to trade flows, such that trade and FDI are substitutes. Moreover, the results also suggest that FDI increases with home country political and economic stability. The paper also shows that previously reported results, regarding the importance of exchange rates, relative borrowing costs and labour costs in explaining FDI flows, are sensitive to the econometric specification and estimation approach. The paper also discusses the importance of these results within a policy context. In recent years Japan has sought to attract FDI, though many firms still complain of barriers to inward investment penetration in Japan. The results show that cultural and geographic distance are only of marginal importance in explaining FDI, and that the results are consistent with the market-seeking explanation of FDI. As such, the attitude to risk in the source country is strongly related to the size of FDI flows to Japan. © 2007 The Authors Journal compilation © 2007 Blackwell Publishing Ltd.

Are web designers resisting the inclusion of social cues when creating website user interface?

Using the resistance literature as an underpinning theoretical framework, this chapter analyzes how Web designers through their daily practices, (i) adopt recursive, adaptive, and resisting behavior regarding the inclusion of social cues online and (ii) shape the socio-technical power relationship between designers and other stakeholders. Five vignettes in the form of case studies with expert individual Web designers are used. Findings point out at three types of emerging resistance namely: market driven resistance, ideological resistance, and functional resistance. In addition, a series of propositions are provided linking the various themes. Furthermore, the authors suggest that stratification in Web designers’ type is occurring and that resistance offers a novel lens to analyze the debate.

The use of ICT by logistics service providers and implications for training needs:a cross-country perspective

Changes in the international economic scenario in recent years have made it necessary for both industrial and service firms to reformulate their strategies, with a strong focus on the resources required for successful implementation. In this scenario, information and communication technologies (ICT) has a potentially vital role to play both as a key resource for re-engineering business processes within a framework of direct connection between suppliers and customers, and as a source of cost optimisation. There have also been innovations in the logistics and freight transport industry in relation to ICT diffusion. The implementation of such systems by third party logistics providers (3PL) allows the real-time exchange of information between supply chain partners, thereby improving planning capability and customer service. Unlike other industries, the logistics and freight transport industry is lagging somewhat behind other sectors in ICT diffusion. This situation is to be attributed to a series of both industry-specific and other factors, such as: (a) traditional resistance to change on the part of transport and logistics service providers; (b) the small size of firms that places considerable constraints upon investment in ICT; (c) the relative shortage of user-friendly applications; (d) the diffusion of internal standards on the part of the main providers in the industry whose aim is to protect company information, preventing its dissemination among customers and suppliers; (e) the insufficient degree of professional skills for using such technologies on the part of staff in such firms. The latter point is of critical importance insofar as the adoption of ICT is making it increasingly necessary both to develop new technical skills to use different hardware and new software tools, and to be able to plan processes of communication so as to allow the optimal use of ICT. The aim of this paper is to assess the impact of ICT on transport and logistics industry and to highlight how the use of such new technologies is affecting providers' training needs. The first part will provide a conceptual framework of the impact of ICT on the transport and logistics industry. In the second part the state of ICT dissemination in the Italian and Irish third party logistics industry will be outlined. In the third part, the impact of ICT on the training needs of transport and logistics service providers - based on case studies in both countries - are discussed. The implications of the foregoing for the development of appropriate training policies are considered. For the covering abstract see ITRD E126595.