When cost-efficient technologies meet politics:a case study of radical wireless network implementation

Cost efficiency has been a dominant perspective in the traditional IT literature. However, in complex technology and business environment, the widely recognized cost efficient assumption of information technology has been increasingly challenged. Drawing from a case study of wireless network implementation situated in a politically sensitive workplace, this paper provided practice insights for IT managers in today’s networked economy. More specifically, stories experienced in the case study illustrated that despite well-calculated cost efficiency of wireless network infrastructure, the radical implementation process in the case organization encountered enormous challenges and opposition due to the fact that administrators failed to consider various stakeholders’ positions and interests. Eventually, the implementation objectives and outcome were considerably undermined. Implications from this empirical case research reemphasized the significance of understanding political forces situated in any business environment where different stakeholders hold conflicting interests. Lessons learned from the case story further encouraged IT managers and policy makers to better strategize emerging information technology in general and wireless networks in particular as the whole global society and business environment are increasingly facing an emerging wireless world.

Managing radical ICT implementation and politics: A case study of cost-efficient wireless networks

This paper analyzes a case study of wireless network implementation in a politically sensitive environment and seeks to gain practical insights for IT managers in today’s networked economy. The case evolved around an urgent decision to implement wireless networks that were a radical replacement for the existing wired network infrastructure. Although the wireless network infrastructure was well calculated as being considerably cost-efficient, inexperienced administrators and IT department failed to consult various involved stakeholders. Consequently, unintended results of wireless network implementation entangled with the cost efficiency of technology outcome and in turn undermined the objectives and achievement of the initial project plan. Drawing from social perspectives, this case study challenges traditionally dominant perspectives of technology efficiency and summarizes several lessons that could help IT managers and policy makers to better strategize ICT in general, and wireless networks in particular.

Cost-efficient OFDM generation at 60-GHz by heterodyne technique with direct modulation and envelope detector

A cost-effective radio over fiber system to up-convert and transmit multigigabit signals at 60 GHz is presented. A low intermediate frequency OFDM signal is used to directly modulate a laser, which is combined with an independent unmodulated laser. The generated millimeter wave frequency can be adjusted by tuning the frequency separation between the lasers. Since no external modulator is required, this technique is low-cost and it is easily integrable in a single chip. In this paper, we present numerical results showing the feasibility of generating an IEEE 802.15.3c compliant 3.5-Gbps 60-GHz OFDM. We show that received signal quality is not limited by the lasers' linewidth but by the relative intensity noise. © 2013 IEEE.

Short cycle times for cost-efficient processing in lyophilized formulations

Pharmaceutical scientists who bulk freeze dry need to foremost identify what quality factors are of a priority during cycle development since the economics of freeze-drying do not allow for both the cost-efficient production and the ability to obtain the highest quality score across all quality factors. Consider; morphology, activity, dissolution, long-term storage, packaging and cost.

Evaluating cost efficiency in central administrative services in UK universities

This paper describes an attempt to evaluate cost efficiency in UK university central administration. The funding councils of higher education institutions have progressively evolved elaborate systems for measuring university performance in teaching quality and research. Indeed, funding of universities is linked to their performance in research. The allocation of resources between academic and administrative activities, on the other hand, has so far not been subject to scrutiny. Yet, expenditure on administration is typically some 30% of that allocated to academic activities. This paper sets up a data envelopment analysis (DEA) framework to identify practices leading to cost-efficient central administrative services in UK universities. The problems in defining the unit of assessment and the relationship between the inputs and the outputs are clearly demonstrated. © 2005 Elsevier Ltd. All rights reserved.

Scale and scope economies and the efficient vertical and horizontal configuration of the water industry:a survey of the literature

This paper surveys the literature on scale and scope economies in the water and sewerage industry. The magnitude of scale and scope economies determines the cost efficient configuration of any industry. In the case of a regulated sector, reliable estimates of these economies are relevant to inform reform proposals that promote vertical (un)bundling and mergers. The empirical evidence allows some general conclusions. First, there is considerable evidence for the existence of vertical scope economies between upstream water production and distribution. Second, there is only mixed evidence on the existence of (dis)economies of scope between water and sewerage activities. Third, economies of scale exist up to certain output level, and diseconomies of scale arise if the company increases its size beyond this level. However, the optimal scale of utilities also appears to vary considerably between countries. Finally, we briefly consider the implications of our findings for water pricing and point to several directions for necessary future empirical research on the measurement of these economies, and explaining their cross country variation.

Cost-effective upgrade of WDM all-optical networks using overlay fibres and hop reduction links

Fibre overlay is a cost-effective technique to alleviate wavelength blocking in some links of a wavelength-routed optical network by increasing the number of wavelengths in those links. In this letter, we investigate the effects of overlaying fibre in an all-optical network (AON) based on GÉANT2 topology. The constraint-based routing and wavelength assignment (CB-RWA) algorithm locates where cost-efficient upgrades should be implemented. Through numerical examples, we demonstrate that the network capacity improves by 25 per cent by overlaying fibre on 10 per cent of the links, and by 12 per cent by providing hop reduction links comprising 2 per cent of the links. For the upgraded network, we also show the impact of dynamic traffic allocation on the blocking probability. Copyright © 2010 John Wiley & Sons, Ltd.

Cost-effective upgrade of WDM all-optical networks using overlay fibres and hop reduction links

Fibre overlay is a cost-effective technique to alleviate wavelength blocking in some links of a wavelength-routed optical network by increasing the number of wavelengths in those links. In this letter, we investigate the effects of overlaying fibre in an all-optical network (AON) based on GÉANT2 topology. The constraint-based routing and wavelength assignment (CB-RWA) algorithm locates where cost-efficient upgrades should be implemented. Through numerical examples, we demonstrate that the network capacity improves by 25 per cent by overlaying fibre on 10 per cent of the links, and by 12 per cent by providing hop reduction links comprising 2 per cent of the links. For the upgraded network, we also show the impact of dynamic traffic allocation on the blocking probability. Copyright © 2010 John Wiley & Sons, Ltd.

Phase shift keyed systems based on a gain switched laser transmitter

Return-to-Zero (RZ) and Non-Return-to-Zero (NRZ) Differential Phase Shift Keyed (DPSK) systems require cheap and optimal transmitters for widespread implementation. The authors report on a gain switched Discrete Mode (DM) laser that can be employed as a cost efficient transmitter in a 10.7 Gb/s RZ DPSK system and compare its performance to that of a gain switched Distributed Feed-Back (DFB) laser. Experimental results show that the gain switched DM laser readily provides error free performance and a receiver sensitivity of -33.1 dBm in the 10.7 Gbit/s RZ DPSK system. The standard DFB laser on the other hand displays an error floor at 10(-1) in the same RZ DPSK system. The difference in performance, between the two types of gain switched transmitters, is analysed by investigating their linewidths. We also demonstrate, for the first time, the generation of a highly coherent gain switched pulse train which displays a spectral comb of approximately 13 sidebands spaced by the 10.7 GHz modulation frequency. The filtered side-bands are then employed as narrow linewidth Continuous Wave (CW) sources in a 10.7 Gb/s NRZ DPSK system.

Public participation by appeal - insights from empirical evaluation in Finland

Environmental law increasingly provides for participatory rights, including appeal rights, to ensure informed, legitimate decision-making. Despite consensus around the general need for participatory rights, including strong ones such as a right to appeal, public participation in environmental decision-making is often criticised. The critics' main argument is that the negative side effects resulting particularly from the use of strong participatory rights outweigh their benefits. Recent regulatory trends arising from better regulation policy to make environmental decision-making more cost-efficient tend to pay special attention to such arguments despite limited empirical evidence. This article provides evidence using material-concerning appeals against pollution permits in Finland and suggests that judicial review is a necessary and effective process for both protecting citizens' rights and improving the quality of environmental protection. © The Author [2008]. Published by Oxford University Press. All rights reserved.

Serial dark soliton for 100-Gb/s applications

We analyze the performance through numerical simulations of a new modulation format: serial dark soliton (SDS) for wide-area 100-Gb/s applications. We compare the performance of the SDS with conventional dark soliton, amplitude-modulation phase-shift keying (also known as duobinary), nonreturn-to-zero, and return-to-zero modulation formats, when subjected to typical wide-area-network impairments. We show that the SDS has a strong chromatic dispersion and polarization-mode-dispersion tolerance, while maintaining a compact spectrum suitable for strong filtering requirement in ultradense wavelength-division-multiplexing applications. The SDS can be generated using commercially available components for 40-Gb/s applications and is cost efficient when compared with other 100-Gb/s electrical-time-division-multiplexing systems.

Using DEA to estimate potential savings at GP units at medical specialty level

The aim of this paper is to identify benchmark cost-efficient General Practitioner (GP) units at delivering health care in the Geriatric and General Medicine (GMG) specialty and estimate potential cost savings. The use of a single medical specialty makes it possible to reflect more accurately the medical condition of the List population of the Practice so as to contextualize its expenditure on care for patients. We use Data Envelopment Analysis (DEA) to estimate the potential for cost savings at GP units and to decompose these savings into those attributable to the reduction of resource use, to altering the mix of resources used and to those attributable to securing better resource 'prices'. The results reveal a considerable potential for savings of varying composition across GP units. © 2013 Elsevier Ltd.

'Why don't you try it again?' A comparison of parent led, home based interventions aimed at increasing children's consumption of a disliked vegetable

Previous research suggests that the use of modelling and non-food rewards may be effective at increasing tasting, and consequential liking and acceptance, of a previously disliked food. Although successful school-based interventions have been developed, there is a lack of research into home-based interventions using these methods. This study aimed to develop and investigate the efficacy of a parent led home-based intervention for increasing children's acceptance of a disliked vegetable. A total of 115 children aged 2-4 years were allocated to one of four intervention groups or to a no-treatment control. The four intervention conditions were: repeated exposure; modelling and repeated exposure; rewards and repeated exposure; or modelling, rewards and repeated exposure. Children in all of the intervention conditions were exposed by a parent to daily offerings of a disliked vegetable for 14 days. Liking and consumption of the vegetable were measured pre and post-intervention. Significant increases in post-intervention consumption were seen in the modelling, rewards and repeated exposure condition and the rewards and repeated exposure condition, compared to the control group. Significant post-intervention differences in liking were also found between the experimental groups. Liking was highest (>60%) in the modelling, rewards and repeated exposure group and the rewards and repeated exposure group, intermediate (>26%) in the modelling and repeated exposure and repeated exposure groups, and lowest in the control group (10%). Parent led interventions based around modelling and offering incentives may present cost efficient ways to increase children's vegetable consumption.

Outsourcing decisions:the case of parallel production

Purpose – The purpose of this paper is to investigate an underexplored aspect of outsourcing involving a mixed strategy in which parallel production is continued in-house at the same time as outsourcing occurs. Design/methodology/approach – The study applied a multiple case study approach and drew on qualitative data collected through in-depth interviews with wood product manufacturing companies. Findings – The paper posits that there should be a variety of mixed strategies between the two governance forms of “make” or “buy.” In order to address how companies should consider the extent to which they outsource, the analysis was structured around two ends of a continuum: in-house dominance or outsourcing dominance. With an in-house-dominant strategy, outsourcing complements an organization's own production to optimize capacity utilization and outsource less cost-efficient production, or is used as a tool to learn how to outsource. With an outsourcing-dominant strategy, in-house production helps maintain complementary competencies and avoids lock-in risk. Research limitations/implications – This paper takes initial steps toward an exploration of different mixed strategies. Additional research is required to understand the costs of different mixed strategies compared with insourcing and outsourcing, and to study parallel production from a supplier viewpoint. Practical implications – This paper suggests that managers should think twice before rushing to a “me too” outsourcing strategy in which in-house capacities are completely closed. It is important to take a dynamic view of outsourcing that maintains a mixed strategy as an option, particularly in situations that involve an underdeveloped supplier market and/or as a way to develop resources over the long term. Originality/value – The concept of combining both “make” and “buy” is not new. However, little if any research has focussed explicitly on exploring the variety of different types of mixed strategies that exist on the continuum between insourcing and outsourcing.

Pharmaceutical process optimisation of bulk lyophilisates:implications of powder handling

Lyophilisation or freeze drying is the preferred dehydrating method for pharmaceuticals liable to thermal degradation. Most biologics are unstable in aqueous solution and may use freeze drying to prolong their shelf life. Lyophilisation is however expensive and has seen lots of work aimed at reducing cost. This thesis is motivated by the potential cost savings foreseen with the adoption of a cost efficient bulk drying approach for large and small molecules. Initial studies identified ideal formulations that adapted well to bulk drying and further powder handling requirements downstream in production. Low cost techniques were used to disrupt large dried cakes into powder while the effects of carrier agent concentration were investigated for powder flowability using standard pharmacopoeia methods. This revealed superiority of crystalline mannitol over amorphous sucrose matrices and established that the cohesive and very poor flow nature of freeze dried powders were potential barriers to success. Studies from powder characterisation showed increased powder densification was mainly responsible for significant improvements in flow behaviour and an initial bulking agent concentration of 10-15 %w/v was recommended. Further optimisation studies evaluated the effects of freezing rates and thermal treatment on powder flow behaviour. Slow cooling (0.2 °C/min) with a -25°C annealing hold (2hrs) provided adequate mechanical strength and densification at 0.5-1 M mannitol concentrations. Stable bulk powders require powder transfer into either final vials or intermediate storage closures. The targeted dosing of powder formulations using volumetric and gravimetric powder dispensing systems where evaluated using Immunoglobulin G (IgG), Lactate Dehydrogenase (LDH) and Beta Galactosidase models. Final protein content uniformity in dosed vials was assessed using activity and protein recovery assays to draw conclusions from deviations and pharmacopeia acceptance values. A correlation between very poor flowability (p<0.05), solute concentration, dosing time and accuracy was revealed. LDH and IgG lyophilised in 0.5 M and 1 M mannitol passed Pharmacopeia acceptance values criteria with 0.1-4 while formulations with micro collapse showed the best dose accuracy (0.32-0.4% deviation). Bulk mannitol content above 0.5 M provided no additional benefits to dosing accuracy or content uniformity of dosed units. This study identified considerations which included the type of protein, annealing, cake disruption process, physical form of the phases present, humidity control and recommended gravimetric transfer as optimal for dispensing powder. Dosing lyophilised powders from bulk was demonstrated as practical, time efficient, economical and met regulatory requirements in cases. Finally the use of a new non-destructive technique, X-ray microcomputer tomography (MCT), was explored for cake and particle characterisation. Studies demonstrated good correlation with traditional gas porosimetry (R2 = 0.93) and morphology studies using microscopy. Flow characterisation from sample sizes of less than 1 mL was demonstrated using three dimensional X-ray quantitative image analyses. A platinum-mannitol dispersion model used revealed a relationship between freezing rate, ice nucleation sites and variations in homogeneity within the top to bottom segments of a formulation.