Product innovation in a new technology based firm

This thesis examines the "state of the art" of product innovation in new technology In the UK. The roles in innovation attributed to small and large firms are examined. Growing attention is being focused upon the small firm sector as a seedbed for Innovation and government policy has been changing to encourage the entrepreneurial new technology based firm (NTBF). The novel perspective of this research results from working in such a firm. It provides a longitudinal study of the management of innovation in conjunction with the corporate strategy of the firm. Given that the researcher was a participant and observer in the firm studied, the research is akin to action research in methodology but is better described as grounded theory. Theoretical concepts are drawn from the prescriptive literature describing corporate strategy, and from the empirical literature which has evaluated new product success and failure. Models of the Innovation process are discussed and appropriate strategies and reasons for product innovation failure in NTBFs are described. The strategy, structure and new product development progress of the company are examined, using both the researcher's observations and company documents. This provides information on the methods and practices adopted for product innovation in a NTBF. The thesis analyses the performance of the firm In terms of product innovation. The models and strategies derived from the literature are then tested in the light of the experience of the company. Conclusions are drawn regarding strategies for innovation in NTBFs and about the innovation process in general. The importance of a NTBF adopting a synergistic strategy is shown. Links are established between the existence of synergy in the strategy and coupling in the management of innovation. Innovation is shown to be a laterally interdisciplinary exercise and therefore the "pipeline model" Is criticised. Finally a set of guidelines Is produced for the managers of NTBFs.

Product innovation in a medium size mature manufacturing company

This thesis is concerned with the management of product innovation inside the medium size, mature, manufacturing company. An academic perspective of innovation is integrated with an account of direct participation acquired over a two year period. The emergent synthesis provides fresh insight into some of the problems associated with producing and sustaining innovation. Product innovation is a very complex activity, and it presents particular difficulties for mature industry. However, the ability to innovate is fundamental to a company's continued survival. Three aspects of product innovation are examined in detail. Firstly, is the requirement to separate innovation activity from the on-going business interests; dependency between the degree of separation and novelty is supported. Secondly, a simple sequential model of the innovation process is tested and shown to be of considerable practical value. Thirdly a relationship is established between the age of the recipient market and the type of innovation to be found in that market All three aspects are found to have important implications for management in their pursuit of innovation. Management deficiencies which inhibited the successful resolution of innovation-linked problems are described and solutions which stress the need for commitment and coherency are proposed. The long existing management structure in the mature company which mitigates against successful and continuing innovation are examined in detail and a strategy is evolved which uses the intrinsic strengths of the mature company to promote innovation of a kind compatible with success in the market. A set of guidelines of practical value is presented for those managers wishing to pursue, and sustain, product innovation in the medium size mature company.

R&D, product innovation, and exporting:evidence from UK new technology based firms

We examine the relationship between R&D, product innovation, and exporting for a sample of new technology based firms (NTBFs) in the UK. Allowance is made for selection bias and for endogeneity between innovation and exporting. Product innovators are more likely to export, but conditional on entering export markets successful innovation does not increase subsequent export intensity. Lagged productivity is strongly associated with exporting, supporting the view that efficient firms are better able to overcome the barriers to entering export markets. We also find strong evidence of the importance of internal R&D and of supply-chain collaborations in fostering innovation, and that formal commercial collaborations can be important in overcoming the (information) sunk costs of entering export markets. The use of e-commerce does nothing to boost entry into export markets, but the intensity of its use is associated with increased export intensity.

Teamwork for product innovation in Taiwanese family firms:an indigenous psychology perspective: An indigenous psychology

As the existing team literature mostly excludes context and culture, little is known about how these elements affect real-life team working (Engestrom, 2008; Salas & Wildman, 2009), and how teams work in non-Western settings, such as in Chinese firms (Phan, Zhou, & Abrahamson, 2010).This research addresses this issue by investigating how new product design (NPD) teams use team working to carry out product innovation in the context of Chinese family businesses (CFBs) via an indigenous psychology perspective. Unlike mainstream teamwork literature which mostly employs an etic design, an indigenous psychology perspective adopts an emic approach which places emphasis on understanding real-life phenomena in context through a cultural-insider perspective (Kim, 2000). Compatible with this theoretical position, a multiple qualitative case study approach was used as the research methodology. Three qualitative case studies were carried out in three longstanding family-run manufacturing firms in Taiwan, where family firms have been the pillars of high economic growth in the past five decades (W.-w. Chu, 2009). Two salient findings were established across the three case studies. First, the team processes identified across the three family firms are very similar with the exception of owners’ involvement and on-the-job training. All three family firms’ NPD teams are managed in a highly hierarchical manner, with considerable emphasis placed on hierarchical ranking, cost-effectiveness, efficiency, practicability, and interpersonal harmony. Second, new products developed by CFBNPD teams are mostly incremental innovation or copycat innovation, while radical or original products are rare. In many ways, CFBNPD teams may not be the ideal incubators for innovation. This is because several aspects of their unique context can cast constraints on how they work and innovate, and thus limit the ratio of radical innovation. A multi-level review into the facilitators and inhibitors of creativity or innovation in CFBNPD teams is provided. The theoretical and practical implications of the findings and the limitations of the study are also addressed.

Success factors of product innovation:an updated meta-analysis

Assessing factors that predict new product success (NPS) holds critical importance for companies, as research shows that despite considerable new product investment, success rates are generally below 25%. Over the decades, meta-analytical attempts have been made to summarize empirical findings on NPS factors. However, market environment changes such as increased global competition, as well as methodological advancements in meta-analytical research, present a timely opportunity to augment their results. Hence, a key objective of this research is to provide an updated and extended meta-analytic investigation of the factors affecting NPS. Using Henard and Szymanski's meta-analysis as the most comprehensive recent summary of empirical findings, this study updates their findings by analyzing articles published from 1999 through 2011, the period following the original meta-analysis. Based on 233 empirical studies (from 204 manuscripts) on NPS, with a total 2618 effect sizes, this study also takes advantage of more recent methodological developments by re-calculating effects of the meta-analysis employing a random effects model. The study's scope broadens by including overlooked but important additional variables, notably “country culture,” and discusses substantive differences between the updated meta-analysis and its predecessor. Results reveal generally weaker effect sizes than those reported by Henard and Szymanski in 2001, and provide evolutionary evidence of decreased effects of common success factors over time. Moreover, culture emerges as an important moderating factor, weakening effect sizes for individualistic countries and strengthening effects for risk-averse countries, highlighting the importance of further investigating culture's role in product innovation studies, and of tracking changes of success factors of product innovations. Finally, a sharp increase since 1999 in studies investigating product and process characteristics identifies a significant shift in research interest in new product development success factors. The finding that the importance of success factors generally declines over time calls for new theoretical approaches to better capture the nature of new product development (NPD) success factors. One might speculate that the potential to create competitive advantages through an understanding of NPD success factors is reduced as knowledge of these factors becomes more widespread among managers. Results also imply that managers attempting to improve success rates of NPDs need to consider national culture as this factor exhibits a strong moderating effect: Working in varied cultural contexts will result in differing antecedents of successful new product ventures.

Consumer trial, continuous use, and economic benefits of a retail service innovation:the case of the personal shopping assistant

Service innovations in retailing have the potential to benefit consumers as well as retailers. This research models key factors associated with the trial and continuous use of a specific self-service technology (SST), the personal shopping assistant (PSA), and estimates retailer benefits from implementing that innovation. Based on theoretical insights from prior SST studies, diffusion of innovation literature, and the technology acceptance model (TAM), this study develops specific hypotheses and tests them on a sample of 104 actual users of the PSA and 345 nonusers who shopped at the retail store offering the PSA device. Results indicate that factors affecting initial trial are different from those affecting continuous use. More specifically, consumers' trust toward the retailer, novelty seeking, and market mavenism are positively related to trial, while technology anxiety hinders the likelihood of trying the PSA. Perceived ease of use of the device positively impacts continuous use while consumers' need for interaction in shopping environments reduces the likelihood of continuous use. Importantly, there is evidence on retailer benefits from introducing the innovation since consumers using the PSA tend to spend more during each shopping trip. However, given the high costs of technology, the payback period for recovery of investments in innovation depends largely upon continued use of the innovation by consumers. Important implications are provided for retailers considering investments in new in-store service innovations. Incorporation of technology within physical stores affords opportunities for the retailer to reduce costs, while enhancing service provided to consumers. Therefore, service innovations in retailing have the potential to benefit consumers as well as retailers. This research models key factors associated with the trial and continuous use of a specific SST in the retail context, the PSA, and estimates retailer benefits from implementing that innovation. In so doing, the study contributes to the nascent area of research on SSTs in the retail sector. Based on theoretical insights from prior SST studies, diffusion of innovation literature, and the TAM, this study develops specific hypotheses regarding the (1) antecedent effects of technological anxiety, novelty seeking, market mavenism, and trust in the retailer on trial of the service innovation; (2) the effects of ease of use, perceived waiting time, and need for interaction on continuous use of the innovation; and (3) the effect of use of innovation on consumer spending at the store. The hypotheses were tested on a sample of 104 actual users of the PSA and 345 nonusers who shopped at the retail store offering the PSA device, one of the early adopters of PSA in Germany. Data were analyzed using logistic regression (antecedents of trial), multiple regression (antecedents of continuous use), and propensity score matching (assessing retailer benefits). Results indicate that factors affecting initial trial are different from those affecting continuous use. More specifically, consumers' trust toward the retailer, novelty seeking, and market mavenism are positively related to trial, while technology anxiety hinders the likelihood of trying the PSA. Perceived ease of use of the device positively impacts continuous use, while consumers' need for interaction in shopping environments reduces the likelihood of continuous use. Importantly, there is evidence on retailer benefits from introducing the innovation since consumers using the PSA tend to spend more during each shopping trip. However, given the high costs of technology, the payback period for recovery of investments in innovation depends largely upon continued use of the innovation by consumers. Important implications are provided for retailers considering investments in new in-store service innovations. The study contributes to the literature through its (1) simultaneous examination of antecedents of trial and continuous usage of a specific SST, (2) the demonstration of economic benefits of SST introduction for the retailer, and (3) contribution to the stream of research on service innovation, as against product innovation.

What determines innovation activity in Chinese state-owned enterprises? The role of foreign direct investment

We investigate whether inward foreign direct investment (FDI), either at the firm or industry level, has any impact on product innovation by Chinese state-owned enterprises (SOEs). We use a comprehensive firm-level panel data set of some 20,000 SOEs during 1999-2005. Our results show that foreign capital participation at the firm level is associated with higher innovative activity. Inward FDI in the sector, by contrast, has a negative effect on innovative activity in SOEs on average. However, there is a positive effect of sector-level FDI on SOEs that export, invest in human capital, or undertake R&D. © 2008 Elsevier Ltd. All rights reserved.

Innovation and export performance:evidence from UK and German manufacturing plants

Using comparable plant-level surveys we demonstrate significant differences between the determinants of export performance among the UK and German manufacturing plants. Product innovation, however measured, has a strong effect on the probability and propensity to export in both countries. Being innovative is positively related to export probability in both countries. In the UK the scale of plants’ innovation activity is also related positively to export propensity. In Germany, however, where levels of innovation intensity are higher but the proportion of sales attributable to new products is lower, there is some evidence of a negative relationship between the scale of innovation activity and export performance. Significant differences are identified between innovative and non-innovative plants, especially in their absorption of spill-over effects. Innovative UK plants are more effective in their ability to exploit spill-overs from the innovation activities of companies in the same sector. In Germany, by contrast, non-innovators are more likely to absorb regional and supply-chain spill-over effects. Co-location to other innovative firms is generally found to discourage exporting.

Modelling the innovation value chain

Innovation events – the introduction of new products or processes – represent the end of a process of knowledge sourcing and transformation. They also represent the beginning of a process of exploitation which may result in an improvement in the performance of the innovating business. This recursive process of knowledge sourcing, transformation and exploitation comprises the innovation value chain. Modelling the innovation value chain for a large group of manufacturing firms in Ireland and Northern Ireland highlights the drivers of innovation, productivity and firm growth. In terms of knowledge sourcing,we find strong complementarity between horizontal, forwards, backwards, public and internal knowledge sourcing activities. Each of these forms of knowledge sourcing also makes a positive contribution to innovation in both products and processes although public knowledge sources have only an indirect effect on innovation outputs. In the exploitation phase, innovation in both products and processes contribute positively tocompany growth, with product innovation having a short-term ‘disruption’ effect on labour productivity. Modelling the complete innovation value chain highlights the structure and complexity of the process of translating knowledge into business value and emphasises the role of skills, capital investment and firms’ other resources in the value creation process.

The innovation value chain

Innovation events - the introduction of new products or processes - represent the end of a process of knowledge sourcing and transformation. They also represent the beginning of a process of exploitation which may result in an improvement in the performance of the innovating business. This recursive process of knowledge sourcing, transformation and exploitation we call the innovation value chain. Modelling the innovation value chain for a large group of manufacturing firms in Ireland and Northern Ireland highlights the drivers of innovation, productivity and firm growth. In terms of knowledge sourcing, we find strong complementarity between horizontal, forwards, backwards, public and internal knowledge sourcing activities. Each of these forms of knowledge sourcing also makes a positive contribution to innovation in both products and processes although public knowledge sources have only an indirect effect on innovation outputs. In the exploitation phase, innovation in both products and processes contribute positively to company growth, with product innovation having a short-term ‘disruption’ effect on labour productivity. Modelling the complete innovation value chain highlights the structure and complexity of the process of translating knowledge into business value and emphasises the role of skills, capital investment and firms’ other resources in the value creation process.

Innovation, ownership and profitability

There is lots of evidence that innovating firms are persistently more profitable than non-innovators, but little agreement on why this is the case. It may be because innovators are somehow able to protect their new products from the competition which normally erodes profits, or because innovating firms have superior capabilities and are able to introduce multiple innovations over time. And very little is known about the relationship between innovation, external ownership and profitability, despite the fact that foreign-owned firms are frequently highly innovative and very profitable. This paper considers the relationship between innovation, ownership and profitability for a panel of manufacturing plants in Ireland and Northern Ireland. We consider the link between innovation and profits separately for innovators and non-innovators, and for indigenous innovators and non-innovators and externally-owned plants. We also consider the determinants of innovation over the distribution of plant-level profitability, and find that the determinants of profitability – including innovation and external ownership – are quite different for low and high-profitability plants. We find support for the view that innovators and non-innovators have different profitability determinants, and that externally-owned plants have their profitability determined in a quite different way from indigenous enterprises. For indigenous non-innovators only the sector matters. Profitability in these enterprises is dictated largely by the industry they are in, with plants having virtually no means of differentiating their profitability from the norms of the industry. By contrast, indigenously-owned innovators are able to differentiate their profit performance from industry norms to some extent. Absolute size matters (negatively) and they get a strong boost from product innovation, but having a high market share does not matter for the profitability of indigenously-owned innovators. Externally-owned plants have a quite different set of profitability determinants from both of these groups. What matters for these plants is not the boost they get from innovating (there is none) but instead their position in the domestic market – a high market share boosts profitability. In policy terms our results suggest both optimistic and cautionary messages. On the positive side our results suggest that efforts to promote innovation activity among indigenously-owned plants are likely to have significant longer term benefits through their capability effects. For the development agencies in Ireland this is a reassuring result. On the more negative side, the lack of any relationship in our models between the innovation activities of externally-owned plants and their (profitability) performance raises potential concerns. This finding may reflect the lack of linkages between externally-owned plants and their Irish resource base, in turn raising some worrying issues about the ‘embeddedness’ of much FDI into Ireland and therefore its ‘stickiness’ in the face of Ireland’s increasing high relative cost base.

Exporting and innovation performance: analysis of the Annual Small Business Survey in the UK

This paper analyses the determinants of the export propensity of UK small and medium-sized enterprises (SMEs) based on the 2004 Annual Small Business Survey. Particular emphasis is placed upon the relationship between innovation activities (distinguishing product from process innovation) and export performance. In general the data suggest that some 17 per cent of firms within this group sell outside the UK. Businesses that export are also characterized by high levels of innovation activity (43 per cent of exporters innovate in products, 27 per cent innovate in process and 21 per cent innovate in both). When considering product and process innovation independently we find that both impact positively on the decision to export. However, once we consider the interdependence between both innovation activities, we find no robust evidence that process innovation increases the probability to export beyond product innovation.

Innovation in the pharmaceutical industry:a study of the effects of regulation on the U.K. pharmaceutical industry

A history of government drug regulation and the relationship between the pharmaceutical companies in the U.K. and the licensing authority is outlined. Phases of regulatory stringency are identified with the formation of the Committees on Safety of Drugs and Medicines viewed as watersheds. A study of the impact of government regulation on industrial R&D activities focuses on the effects on the rate and direction of new product innovation. A literature review examines the decline in new chemical entity innovation. Regulations are cited as a major but not singular cause of the decline. Previous research attempting to determine the causes of such a decline on an empirical basis is given and the methodological problems associated with such research are identified. The U.K. owned sector of the British pharmaceutical industry is selected for a study employing a bottom-up approach allowing disaggregation of data. A historical background to the industry is provided, with each company analysed or a case study basis. Variations between companies regarding the policies adopted for R&D are emphasised. The process of drug innovation is described in order to determine possible indicators of the rate and direction of inventive and innovative activity. All possible indicators are considered and their suitability assessed. R&D expenditure data for the period 1960-1983 is subsequently presented as an input indicator. Intermediate output indicators are treated in a similar way and patent data are identified as a readily-available and useful source. The advantages and disadvantages of using such data are considered. Using interview material, patenting policies for most of the U.K. companies are described providing a background for a patent-based study. Sources of patent data are examined with an emphasis on computerised systems. A number of searches using a variety of sources are presented. Patent family size is examined as a possible indicator of an invention's relative importance. The patenting activity of the companies over the period 1960-1983 is given and the variation between companies is noted. The relationship between patent data and other indicators used is analysed using statistical methods resulting in an apparent lack of correlation. An alternative approach taking into account variations in company policy and phases in research activity indicates a stronger relationship between patenting activity, R&D Expenditure and NCE output over the period. The relationship is not apparent at an aggregated company level. Some evidence is presented for a relationship between phases of regulatory stringency, inventive and innovative activity but the importance of other factors is emphasised.

The innovation value chain in new technology-based firms:evidence from the U.K.

Innovation is central to the survival and growth of firms, and ultimately to the health of the economies of which they are part. A clear understanding both of the processes by which firms perform innovation and the benefits which flow from innovation in terms of productivity and growth is therefore essential. This paper demonstrates the use of a conceptual framework and modeling tool, the innovation value chain (IVC), and shows how the IVC approach helps to highlight strengths and weaknesses in the innovation performance of a key group of firms-new technology-based firms. The value of the IVC is demonstrated in showing the key interrelationships in the whole process of innovation from sourcing knowledge through product and process innovation to performance in terms of the growth and productivity outcomes of different types of innovation. The use of the IVC highlights key complementarities, such as that between internal R&D, external R&D, and other external sources of knowledge. Other important relationships are also highlighted. Skill resources matter throughout the IVC, being positively associated with external knowledge linkages and innovation success, and also having a direct influence on growth independent of the effect on innovation. A key benefit of the IVC approach is therefore its ability to highlight the roles of different factors at various stages of the knowledge-innovation-performance nexus, and to show their indirect as well as direct impact. This in turn permits both managerial and policy implications to be drawn. © 2012 Product Development & Management Association.