Facilitating intuitive-guided learning in a serious game through integration with a learning content management system

Increased global uptake of entertainment gaming has the potential to lead to high expectations of engagement and interactivity from users of technology-enhanced learning environments. Blended approaches to implementing game-based learning as part of distance or technology-enhanced education have led to demonstrations of the benefits they might bring, allowing learners to interact with immersive technologies as part of a broader, structured learning experience. In this article, we explore how the integration of a serious game can be extended to a learning content management system (LCMS) to support a blended and holistic approach, described as an 'intuitive-guided' method. Through a case study within the EU-Funded Adaptive Learning via Intuitive/Interactive, Collaborative and Emotional Systems (ALICE) project, a technical integration of a gaming engine with a proprietary LCMS is demonstrated, building upon earlier work and demonstrating how this approach might be realized. In particular, how this method can support an intuitive-guided approach to learning is considered, whereby the learner is given the potential to explore a non-linear environment whilst scaffolding and blending provide guidance ensuring targeted learning objectives are met. Through an evaluation of the developed prototype with 32 students aged 14-16 across two Italian schools, a varied response from learners is observed, coupled with a positive reception from tutors. The study demonstrates that challenges remain in providing high-fidelity content in a classroom environment, particularly as an increasing gap in technology availability between leisure and school times emerges.

Strategic and operational risk in an international collaboration agency: a knowledge management solution

The International Cooperation Agency (identified in this article as IDEA) working in Colombia is one of the most important in Colombian society with programs that support gender rights, human rights, justice and peace, scholarships, aboriginal population, youth, afro descendants population, economic development in communities, and environmental development. The identified problem is based on the diversified offer of services, collaboration and social intervention which requires diverse groups of people with multiple agendas, ways to support their mandates, disciplines, and professional competences. Knowledge creation and the growth and sustainability of the organization can be in danger because of a silo culture and the resulting reduced leverage of the separate group capabilities. Organizational memory is generally formed by the tacit knowledge of the organization members, given the value of accumulated experience that this kind of social work implies. Its loss is therefore a strategic and operational risk when most problem interventions rely on direct work in the socio-economic field and living real experiences with communities. The knowledge management solution presented in this article starts first, with the identification of the people and groups concerned and the creation of a knowledge map as a means to strengthen the ties between organizational members; second, by introducing a content management system designed to support the documentation process and knowledge sharing process; and third, introducing a methodology for the adaptation of a Balanced Scorecard based on the knowledge management processes. These three main steps lead to a knowledge management “solution” that has been implemented in the organization, comprising three components: a knowledge management system, training support and promotion of cultural change.

Semantic annotation for knowledge management:requirements and a survey of the state of the art

While much of a company's knowledge can be found in text repositories, current content management systems have limited capabilities for structuring and interpreting documents. In the emerging Semantic Web, search, interpretation and aggregation can be addressed by ontology-based semantic mark-up. In this paper, we examine semantic annotation, identify a number of requirements, and review the current generation of semantic annotation systems. This analysis shows that, while there is still some way to go before semantic annotation tools will be able to address fully all the knowledge management needs, research in the area is active and making good progress.

Knowledge management and risk management

This article takes the perspective that risk knowledge and the activities related to RM practice can benefit from the implementation of KM processes and systems, to produce a better enterprise wide implementation of risk management. Both in the information systems discipline and elsewhere, there has been a trend towards greater integration and consolidation in the management of organizations. Some examples of this are: Enterprise Resource Planning (Stevens, 2003), Enterprise Architecture (Zachmann, 1996) and Enterprise Content Management (Smith & McKeen, 2003). Similarly, risk management is evolving into Enterprise Risk Management. KM’s importance in breaking down silos within an organization can help it to do so.

Justice source and justice content:evaluating the fairness of organizational career management practices

This article presents part of the findings of a multi-method study into employee perceptions of fairness in relation to the organisational career management (OCM) practices of a large financial retailer. It focuses on exploring how employees construct fairness judgements of their career experiences and the role played by the organisational context and, in particular, OCM practices in forming these judgements. It concludes that individuals can, and do, separate the source and content of (in)justice when it comes to evaluating these experiences. The relative roles of the employer, line manager and career development opportunities in influencing employee fairness evaluations are discussed. Conceptual links with organisational justice theory are proposed, and it is argued that the academic and practitioner populations are provided with empirical evidence for a new theoretical framework for evaluating employee perceptions of, and reactions to, OCM practices.

International human resource management:review and critique

The research agenda for the field of international human resource management (IHRM) is clear. For a better understanding and to benefit substantially, management scholars must study IHRM in context (Jackson, S.E. and Schuler, R.S. 1995. Understanding human resource management in the context of organizations and their environment. Annual Review of Psychology, 46: 237–264; Geringer, J.M., Frayne, C.A. and Milliman, J.F. 2002. In search of 'best practices' in international human resource management: research design and methodology. Human Resource Management, forthcoming). IHRM should be studied within the context of changing economic and business conditions. The dynamics of both the local/regional and international/global business context in which the firm operates should be given serious consideration. Further, it could be beneficial to study IHRM within the context of the industry and the firm's strategy and its other functional areas and operations. In taking these perspectives, one needs to use multiple levels of analysis when studying IHRM: the external social, political, cultural and economic environment; the industry, the firm, the sub-unit, the group, and the individual. Research in contextual isolation is misleading: it fails to advance understanding in any significant way (Adler, N.J. and Ghadar, E. 1990. Strategic human resource management: a global perspective. Human Resource Management in International Comparison. Berlin: de Gruyter; Locke, R. and Thelen, K. 1995. Apples and oranges revisited: contextualized comparisons and the study of comparative labor politics. Politics & Society, 23, 337–367). In this paper, we attempt to review the existing state of academic work in IHRM and illustrate how it incorporates the content and how it might be expanded to do so.

Introduction: improving manufacturing performance through technology diffusion, implementation and management

The role of technology management in achieving improved manufacturing performance has been receiving increased attention as enterprises are becoming more exposed to competition from around the world. In the modern market for manufactured goods the demand is now for more product variety, better quality, shorter delivery and greater flexibility, while the financial and environmental cost of resources has become an urgent concern to manufacturing managers. This issue of the International Journal of Technology Management addresses the question of how the diffusion, implementation and management of technology can improve the performance of manufacturing industries. The authors come from a large number of different countries and their contributions cover a wide range of topics within this general theme. Some papers are conceptual, others report on research carried out in a range of different industries including steel production, iron founding, electronics, robotics, machinery, precision engineering, metal working and motor manufacture. In some cases they describe situations in specific countries. Several are based on presentations made at the UK Operations Management Association's Sixth International Conference held at Aston University at which the conference theme was 'Achieving Competitive Edge: Getting Ahead Through Technology and People'. The first two papers deal with questions of advanced manufacturing technology implementation and management. Firstly Beatty describes a three year longitudinal field study carried out in ten Canadian manufacturing companies using CADICAM and CIM systems. Her findings relate to speed of implementation, choice of system type, the role of individuals in implementation, organization and job design. This is followed by a paper by Bessant in which he argues that a more a strategic approach should be taken towards the management of technology in the 1990s and beyond. Also considered in this paper are the capabilities necessary in order to deploy advanced manufacturing technology as a strategic resource and the way such capabilities might be developed within the firm. These two papers, which deal largely with the implementation of hardware, are supplemented by Samson and Sohal's contribution in which they argue that a much wider perspective should be adopted based on a new approach to manufacturing strategy formulation. Technology transfer is the topic of the following two papers. Pohlen again takes the case of advanced manufacturing technology and reports on his research which considers the factors contributing to successful realisation of AMT transfer. The paper by Lee then provides a more detailed account of technology transfer in the foundry industry. Using a case study based on a firm which has implemented a number of transferred innovations a model is illustrated in which the 'performance gap' can be identified and closed. The diffusion of technology is addressed in the next two papers. In the first of these, by Lowe and Sim, the managerial technologies of 'Just in Time' and 'Manufacturing Resource Planning' (or MRP 11) are examined. A study is described from which a number of factors are found to influence the adoption process including, rate of diffusion and size. Dahlin then considers the case of a specific item of hardware technology, the industrial robot. Her paper reviews the history of robot diffusion since the early 1960s and then tries to predict how the industry will develop in the future. The following two papers deal with the future of manufacturing in a more general sense. The future implementation of advanced manufacturing technology is the subject explored by de Haan and Peters who describe the results of their Dutch Delphi forecasting study conducted among a panel of experts including scientists, consultants, users and suppliers of AMT. Busby and Fan then consider a type of organisational model, 'the extended manufacturing enterprise', which would represent a distinct alternative pure market-led and command structures by exploiting the shared knowledge of suppliers and customers. The three country-based papers consider some strategic issues relating manufacturing technology. In a paper based on investigations conducted in China He, Liff and Steward report their findings from strategy analyses carried out in the steel and watch industries with a view to assessing technology needs and organizational change requirements. This is followed by Tang and Nam's paper which examines the case of machinery industry in Korea and its emerging importance as a key sector in the Korean economy. In his paper which focuses on Venezuela, Ernst then considers the particular problem of how this country can address the problem of falling oil revenues. He sees manufacturing as being an important contributor to Venezuela's future economy and proposes a means whereby government and private enterprise can co-operate in development of the manufacturing sector. The last six papers all deal with specific topics relating to the management manufacturing. Firstly Youssef looks at the question of manufacturing flexibility, introducing and testing a conceptual model that relates computer based technologies flexibility. Dangerfield's paper which follows is based on research conducted in the steel industry. He considers the question of scale and proposes a modelling approach determining the plant configuration necessary to meet market demand. Engstrom presents the results of a detailed investigation into the need for reorganising material flow where group assembly of products has been adopted. Sherwood, Guerrier and Dale then report the findings of a study into the effectiveness of Quality Circle implementation. Stillwagon and Burns, consider how manufacturing competitiveness can be improved individual firms by describing how the application of 'human performance engineering' can be used to motivate individual performance as well as to integrate organizational goals. Finally Sohal, Lewis and Samson describe, using a case study example, how just-in-time control can be applied within the context of computer numerically controlled flexible machining lines. The papers in this issue of the International Journal of Technology Management cover a wide range of topics relating to the general question of improving manufacturing performance through the dissemination, implementation and management of technology. Although they differ markedly in content and approach, they have the collective aim addressing the concepts, principles and practices which provide a better understanding the technology of manufacturing and assist in achieving and maintaining a competitive edge.

Operations management

Operations management deals with the management of the creation of goods and the delivery of services to the customer. It plays an essential role in the success of any organization. In this book, Andrew Greasley provides a clear and accessible introduction to this important area of study, focusing on all key areas of operations in both manufacturing and service industries. Operations Management, Second Edition covers the main areas of operations strategy, the design of the operations system and the management of operations over time. Yet, its concise nature of the text means students are not overwhelmed by the amount of material presented. This new edition also features: New content in such areas such as the quality gap model, enterprise systems and business process management. Expanded case studies, to include more global and European cases and longer cases at the end of each chapter. Greater clarity in chapter material organization. Worked Examples providing a step–by–step guide to the procedure to solve quantitative problems. Visual redesign in full colour. More support material for students and lecturers, including an interactive WileyPLUS course. All lecturers can access supporting resources on the companion website at www.wiley.com/college/greasley including an Instructor’s Manual with suggested solutions for all case study questions and end of chapter exercises, a Test Bank and PowerPoint slides for each chapter. Students will find multiple–choice test quizzes, web–links and an online glossary. Operations Management is essential reading for all students studying operations management, whether on undergraduate, postgraduate or continuing professional development courses.

School vision screening, ages 5-16 years:The evidence-base for content, provision and efficacy

The optometric profession in the UK has a major role in the detection, assessment and management of ocular anomalies in children between 5 and 16 years of age. The role complements a variety of associated screening services provided across several health care sectors. The review examines the evidence-base for the content, provision and efficacy of these screening services in terms of the prevalence of anomalies such as refractive error, amblyopia, binocular vision and colour vision and considers the consequences of their curtailment. Vision screening must focus on pre-school children if the aim of the screening is to detect and treat conditions that may lead to amblyopia, whereas if the aim is to detect and correct significant refractive errors (not likely to lead to amblyopia) then it would be expedient for the optometric profession to act as the major provider of refractive (and colour vision) screening at 5-6 years of age. Myopia is the refractive error most likely to develop during primary school presenting typically between 8 and 12 years of age, thus screening at entry to secondary school is warranted. Given the inevitable restriction on resources for health care, establishing screening at 5 and 11 years of age, with exclusion of any subsequent screening, is the preferred option. © 2004 The College of Optometrists.

Strategy making process, its content and context in small professional football clubs

This thesis examines the phenomenon of strategy. Making as practised by small professional football clubs. The study was undertaken because football clubs were perceived to have problems with strategy-making and because it was believed that the specific circumstances of football clubs could be outside the range of views covered by conventional views of strategy-making. The characteristics of the club environment are its uncertainty and unpredictability, simultaneous competition and co--operation, strong regulations, and a not-for-profit orientation. Small clubs in particular face a constant struggle for financial viability and survival, due in part to split business and playing objectives. The study was designed to establish the extent and nature of the difficulties clubs experience with a view to preparing the way for creating practical guidance on ways to overcome them. Clearly, in order to survive in the long term, small professional football clubs require very effective strategic decisions. This study has addressed this issue by inquiring into the nature of strategy making for these organisations with the objective to establish the general direction in which the football clubs in question should be moving. As a result, the main research question to guide this investigation was determined as: Why do small professional football clubs have difficulties making strategies. The investigation was based on an analysis the concept of strategy and its elements, the strategic vision and objectives, the process by which strategic action comes about, the strategic action itself, and the context within which this action occurs. Data has been collected, analysed and interpreted in relation to each of these elements. Together with a wide variety of published material, 20 small football clubs have been sampled and personal interviews were conducted with board members of those clubs. The findings indicate that small football clubs do indeed experience considerable difficulties in making strategies, the reasons for which lie both in the characteristics of their competitive environment and their approaches to strategy-making. The competitive environment is characterised by a cartel-like structure with a high degree of regulation, high levels of uncertainty, little control over the core product or the production process, short-term business cycles and a close geographical link between a club with its local market. The management of clubs is characterised by the need to balance conflicting sporting and business objectives. Formal planning techniques are of little use in the small football club context as decision-making processes have a strong political character and the development of novel strategies is hindered by a strong conservative, industry paradigm and a lack of financial and managerial resources. It is concluded that there is no simple advice to be given to clubs, as they must re-examine the relationship between their playing and business objectives to create a unified and workable approach.

A configuration framework of manufacturing strategy paradigm in state owned enterprises within China's petrochemical industry:building context-embedded configurations for the paradigm of strategic manufacturing management from exploratory case studies

The role of the production system as a key determinant of competitive performance of business operations- has long been the subject of industrial organization research, even predating the .explicit conceptua1isation of manufacturing, strategy in the literature. Particular emergent production issues such as the globalisation of production, global supply chain management, management of integrated manufacturing and a growing e~busjness environment are expected to critically influence the overall competitive performance and therefore the strategic success of the organization. More than ever, there is a critical need to configure and improve production system and operations competence in a strategic way so as to contribute to the long-term competitiveness of the organization. In order to operate competitively and profitably, manufacturing companies, no matter how well managed, all need a long-term 'strategic direction' for the development of operations competence in order to consistently produce more market value with less cost towards a leadership position. As to the long-term competitiveness, it is more important to establish a dynamic 'strategic perspective' for continuous operational improvements in pursuit of this direction, as well as ongoing reviews of the direction in relation to the overall operating context. However, it also clear that the 'existing paradigm of manufacturing strategy development' is incapable of adequately responding to the increasing complexities and variations of contemporary business operations. This has been factually reflected as many manufacturing companies are finding that methodologies advocated in the existing paradigm for developing manufacturing strategy have very limited scale and scope for contextual contingency in empirical application. More importantly, there has also emerged a deficiency in the multidimensional and integrative profile from a theoretical perspective when operationalising the underlying concept of strategic manufacturing management established in the literature. The point of departure for this study was a recognition of such contextual and unitary limitations in the existing paradigm of manufacturing strategy development when applied to contemporary industrial organizations in general, and Chinese State Owned Enterprises (SOEs) in particular. As China gradually becomes integrated into the world economy, the relevance of Western management theory and its paradigm becomes a practical matter as much as a theoretical issue. Since China markedly differs from Western countries in terms of culture, society, and political and economic systems, it presents promising grounds to test and refine existing management theories and paradigms with greater contextual contingency and wider theoretical perspective. Under China's ongoing programmes of SOE reform, there has been an increased recognition that strategy development is the very essence of the management task for managers of manufacturing companies in the same way as it is for their counterparts in Western economies. However, the Western paradigm often displays a rather naive and unitary perspective of the nature of strategic management decision-making, one which largely overlooks context-embedded factors and social/political influences on the development of manufacturing strategy. This thesis studies the successful experiences of developing manufacturing strategy from five high-performing large-scale SOEs within China’s petrochemical industry. China’s petrochemical industry constitutes a basic heavy industrial sector, which has always been a strategic focus for reform and development by the Chinese government. Using a confirmation approach, the study has focused on exploring and conceptualising the empirical paradigm of manufacturing strategy development practiced by management. That is examining the ‘empirical specifics’ and surfacing the ‘managerial perceptions’ of content configuration, context of consideration, and process organization for developing a manufacturing strategy during the practice. The research investigation adopts a qualitative exploratory case study methodology with a semi-structural front-end research design. Data collection follows a longitudinal and multiple-case design and triangulates case evidence from sources including qualitative interviews, direct observation, and a search of documentations and archival records. Data analysis follows an investigative progression from a within-case preliminary interpretation of facts to a cross-case search for patterns through theoretical comparison and analytical generalization. The underlying conceptions in both the literature of manufacturing strategy and related studies in business strategy were used to develop theoretical framework and analytical templates applied during data collection and analysis. The thesis makes both empirical and theoretical contributions to our understanding of 'contemporary management paradigm of manufacturing strategy development'. First, it provides a valuable contextual contingency of the 'subject' using the business setting of China's SOEs in petrochemical industry. This has been unpacked into empirical configurations developed for its context of consideration, its content and process respectively. Of special note, a lean paradigm of business operations and production management discovered at case companies has significant implications as an emerging alternative for high-volume capital intensive state manufacturing in China. Second, it provides a multidimensional and integrative theoretical profile of the 'subject' based upon managerial perspectives conceptualised at case companies when operationalising manufacturing strategy. This has been unpacked into conceptual frameworks developed for its context of consideration, its content constructs, and its process patterns respectively. Notably, a synergies perspective towards the operating context, competitive priorities and competence development of business operations and production management has significant implications for implementing a lean manufacturing paradigm. As a whole, in so doing, the thesis established a theoretical platform for future refinement and development of context-specific methodologies for developing manufacturing strategy.

Planning and implementing safety management systems

This thesis describes a study of the content and applicability of BS8800:1996 Guide to occupational health and safety management systems. The research is presented chronologically, with literature review and content analysis of SMS related guides and standards interwoven with two elements of qualitative empirical work. The first of these was carried out shortly after publication of BS8800 in 1996, a 'before-the-event' investigation of how organisations were intending to approach SMS implementation. The challenges faced by these organisations are reviewed against standard management theory, suggesting that the initial motivation for SMS implementation governs the approach organisations will adopt to guidance such as BS8800. The second phase of empirical work was undertaken in the context of OHSAS 18001, an auditable protocol based on BS8800, which allows organisations to certify their safety management systems. A discussion of the evolution of certifiable safety management system is presented, highlighting the similarities and differences between this, BS8800, SMS and wider management system standards. A case study then reviews the experiences of a catering company that implemented 18001, motivated by the opportunity for certification as a business benefit. The empirical work is used to comment on the guidance provided by BS8800, within its evolved role as guidance organisations may use for implementation of a SMS to be certified according to the specifications of OHSAS 18001. It is suggested that optimal implementation is facilitated by initial status review, continual improvement and the use of annexes, where there are used to make changes to the existing safety management system. This thesis concludes with a discussion of these elements, highlighting pertinent areas within BS8800 where revision or amendment may be appropriate.

The process of strategic change:a management perspective

This thesis is concerned with the management processes concerned with complex strategic decision in organisations. The research has sought to explore these processes by taking as its focus the reconstruction of decision processes a) on the basis of an historical study of an industry and in particular a major company in that industry; and b) the perception and understanding of strategic decision processes and change by managers involved in companies in that industry. The main body of analysis and theoretical contributions arise from the detailed analysis of extended depth interviews with managers carried out in 1980 and 1983 which trace thirteen years of the strategic development of a firm. In so doing, extensive use is made of verbatim accounts by managers of events and their interpretation of events. This is then compared with data gathered from.similar interviews with managers of two other companies and examined in the light of existing research and theory in the field. The thesis both provides a detailed insight into the processes associated with the identification and resolution of complex strategic issues and also generates a body of theory concerning the mechanisms by which strategic decisions and the processes of strategic change are interwoven with the cultural and political fabric of organisations. The thesis is divided into four parts. The first part deals with the background to the research, provid1ng a fuller summary of the purpose, structure and content of the thesis and a discussion of relevant previous research and the methodology employed herein. The second part mainly provides case studies of the industry and the main company studied. The third part is a detailed presentation and analysis of data. The fourth part is a synthesis of the findings and consolidation of the theoretical interpretation advanced in the thesis.

The use of spot simulation imagery for forestry mapping and management

SPOT simulation imagery was acquired for a test site in the Forest of Dean in Gloucestershire, U.K. This data was qualitatively and quantitatively evaluated for its potential application in forest resource mapping and management. A variety of techniques are described for enhancing the image with the aim of providing species level discrimination within the forest. Visual interpretation of the imagery was more successful than automated classification. The heterogeneity within the forest classes, and in particular between the forest and urban class, resulted in poor discrimination using traditional `per-pixel' automated methods of classification. Different means of assessing classification accuracy are proposed. Two techniques for measuring textural variation were investigated in an attempt to improve classification accuracy. The first of these, a sequential segmentation method, was found to be beneficial. The second, a parallel segmentation method, resulted in little improvement though this may be related to a combination of resolution in size of the texture extraction area. The effect on classification accuracy of combining the SPOT simulation imagery with other data types is investigated. A grid cell encoding technique was selected as most appropriate for storing digitised topographic (elevation, slope) and ground truth data. Topographic data were shown to improve species-level classification, though with sixteen classes overall accuracies were consistently below 50%. Neither sub-division into age groups or the incorporation of principal components and a band ratio significantly improved classification accuracy. It is concluded that SPOT imagery will not permit species level classification within forested areas as diverse as the Forest of Dean. The imagery will be most useful as part of a multi-stage sampling scheme. The use of texture analysis is highly recommended for extracting maximum information content from the data. Incorporation of the imagery into a GIS will both aid discrimination and provide a useful management tool.

Conflicts and online community social capital:the influence of conflict management practices

Conflicts are part and parcel of online community dynamics (De Valck 2007; Harrison and Jenkins 1996; Kozinets 2001) – from flames about publishing inappropriate content (De Zwart and Lindsay 2009) to battles to win high status positions (Campbell, Fletcher and Greenhill 2009) and stigmatization of illegitimate insiders (Tikkanen, Hietanen, Henttonen, and Rokka 2009) up to bashing and smearing campaigns (Bocij 2002). As the concept of community presumes unity, marketers may be inclined to suppress any dissonance in their online brand communities thinking that it may hurt brand image or community attractiveness. However, Fournier and Lee (2009) advise marketers to embrace the conflicts that make communities thrive. As tensions and conflict cannot be avoided this seems logical advice. Nevertheless, are all tensions and conflicts created equally? Are some not more constructive (or destructive) than others? Thus, should all tensions and conflicts really be embraced, and what can be done to channel tensions and conflicts such that they do not become destructive? These questions form the starting point of this paper.